Related
[UPDATE]
Hi guys, after my account was banned from Play Store, I decided to move all apps on Amazon App Shop for free. :good:
Here you can download last version of Smart Screen OFF PRO.
Smart Screen OFF PRO
http://www.amazon.com/gp/product/B014TKA9VQ
I'll add other apps I developed in the next few weeks.
Download Smart screen off PRO User Guide
DESCRIPTION
Smart Screen Off it's a simple and light app which uses the Proximity Sensor built in your Android smartphone to turn the screen off and on automatically
REASON
I decided to code this app when I bought my Galaxy Nexus: this device doesn't have any physical button on the front screen. Being a quite huge phone, it's quite difficult to press the "turn off" button every time I wanted to turn it off and on. So I needed a way to turn the screen off every time I put it into the pockets and off when removed.
HOW IT WORKS
The app itself is a toggle button, to switch it on just press the App Icon. Then every time you put the phone into your pockets the screen turns off.
If you put the smartphone upside down on the table, the screen turns automatically off.
NOTE: It doesn't lock the screen (just like in a call)
REQUIREMENTS
In order to use Smart Screen Off, you need to have a phone with Proximity Sensor (nowadays every smartphone incorporates one).
Nice APP
Even though I don't need this app...(I prefer manually clicking),
it seems really useful for whom use flip cases.
Such as "planner styled" Galaxy Note
Just installed and it does what it promises. Will be useful for me when at the gym I want to skip songs, I won´t have to unlock the phone a hundred times. Obviously the proximity sensor will be working all the time, did you notice a significant battery drain?. And the app name in the spanish version of the market is badly translated. It says "Fuera de pantalla inteligente" where it should say "Apagado de pantalla inteligente".
This is like screebl?
Good app, great idea. I think you should not only use proximity sensor, but things like orientation. I probably wont use this just because it doesn't seem too useful... I sometimes have my hand on top of my phone (near the sensor) and a finger movement can just keep making it blink on and off etc. Use orientation with this, it'd be better.
GREAT APP!
Works flawlessly, thanks alot.
Just installed V1.1 free from the market and it's a bit too sensitive! I hold my phone in my right hand and when I curl my hand over to touch or make gestures on the screen, the display turns off. Is there any way to adjust the sensitivity? I'm running on a Galaxy Nexus running GummyNex 0.7.6 based on AOSP 4.0.3.
UI is useless for lite so remove it, and as long as it has a notification in status bar i will not use this app, can i get v1 back!
2/5 stars
also in v1.2 there is NO way to turn it off :/
Sent from my VS910 4G using xda premium
check this
https://market.android.com/details?id=com.itsme4ucz.screenoff&feature=search_result
Also quit good..using it allready more than a year
so the phone won't go into sleep if I use it, right?
liljom said:
so the phone won't go into sleep if I use it, right?
Click to expand...
Click to collapse
It won't go sleep, the device screen will only turn off and on
Nice application.
possible to make it work on galaxy tab? it doesnt have a proximity sensor but i believe it has a light sensor and magnatron. maybe make it detect a strong magnetic source to turn it on or off?
Night mode?
Sent from my SGH-T839 using XDA App
Vilcek said:
check this
https://market.android.com/details?id=com.itsme4ucz.screenoff&feature=search_result
Also quit good..using it allready more than a year
Click to expand...
Click to collapse
Proximity Screen Off never worked properly for me on the HD2 with several different versions of Android (both Honeycomb and ICS). It was quite prone to locking up my phone with the display off and locked.
Can you not trigger it to go to deep sleep. Screen should lock, that would be more appropriate imo.
If u turn off the display only,will deep sleep work?
EDIT:Saw the post up^^
akromatic said:
possible to make it work on galaxy tab? it doesnt have a proximity sensor but i believe it has a light sensor and magnatron. maybe make it detect a strong magnetic source to turn it on or off?
Click to expand...
Click to collapse
This one should work on Galaxy tab
https://market.android.com/details?id=com.itsme4ucz.screenoff&feature=search_result
Sent from my Galaxy Nexus using XDA App
thanks i will try it
Mods, please move if this isn't the right section (I contemplated the development section but opted against it).
I'll try to be short while providing enough background to get the more knowledgeable people here the info they need to help me with this problem. Essentially, i have a 32gb P6210 that I'm going to flush mount in my dash to use for in car entertainment. With no access to the hardware buttons I did some research on what would realistically meet my needs (especially getting the screen back on without the power button).
I found Tap Tap App on the market and the widget allows me to turn the screen off and waving my hand in front of the proximity sensor four times turns the screen back on. The issue is that, randomly (has ranged from 10 minutes to 17 hours), the proximity sensor is turned off when the screen is off, making the app inconsistent, even with "never turn off sensor" checked within the app. I'm in talks with the developer and he mentioned that the proximity sensor turning off with the screen off is dependent on the underlying rules built into individual ROMs. I'm on the stock ROM.
I need to know if anyone has info on how to keep the proximity sensor on indefinitely with the screen off so Tap Tap App has the input needed to continuing working as designed. I dont care about battery drain at all, the tab will have constant power. I'm rooted with clockwork mod recovery so if anyone has a system file I can edit, a zip i can flash, a tasker profile you know will work, etc, please post it up. Thanks in advance!
Kinda lonely in here...anyways, as an observation update, the app i was using, Tap Tap App, worked far less reliably using the Power button widget vs having the button in the notification area.
Conversely, I found a very similar app called "Soft Power" and have been using it the past 3 days with no issues. It has no widget option and only has the option for turning off via notification area. I'm thinking that always running the notification area by default means a background service is running to keep it there. I have not yet been able to not wake it up by waving my hand over the prox sensor. So for anybody with similar needs to mine in terms of not wanting or being able to access the power button, this has been a good alternative thus far.
I tried it on my phone. It does not work at all.
LG Optimus 2X 2.3.4
It looks like a promising application.
Perhaps it works on ICS ?
Finally got my app up and running on the Market and being a die hard xda user, I thought it would only be appropriate to post it here for fellow users to enjoy. =)
IntelliCover is a utility which uses your device’s proximity sensor to control its display and allow fast and efficient access to your phone or tablet.
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
P.S. If you find a bug, I'd appreciate if you could report it to me before giving a bad rating because it usually only takes me less than a day to fix.
*** Features ***
Calibration:-
Proximity Sensor Delay – Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock – Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode – Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen – Show the home screen when the screen turns on.
Screen Off Only – The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only – The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot – Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning – Vibrate every time the proximity sensor is triggered.
Status Bar Notification – Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode – Enable or disable airplane mode.
Auto Rotate (will be removed) – Activate or deactivate.
Auto Sync – Activate or deactivate auto-sync.
Bluetooth – Enable or disable Bluetooth.
Haptic Feedback (will be removed) – Activate or deactivate haptic feedback.
Ringer Mode – Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi – Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn’t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ‘Screen On’ and ‘Screen Off’ actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I’ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at [email protected] with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
timmy-kidd said:
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Thanks! Glad you liked it! =)
Profool said:
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
Click to expand...
Click to collapse
Yup, it turns the screen on as well. The values are pretty much just FAR and NEAR for most proximity sensors, so once it detects that there's no object close to it, it should turn the screen on. If it's not turning on at all, that might be the root of the problem i.e. it might be causing the unlock issue as well...Hmmm...I checked out your phone specs and since you said "stock lockscreen", I think it's safe to assume you're on the stock ROM but are you still on Gingerbread? If so, that partially explains the issue. Some Gingerbread ROMs have compatibility issues with the app that are very similar to what you've described, I have no idea why but I'm still looking into it. I had to fix ALOT of Gingerbread issues to get it working this far lol. If you're not on GB though, I guess I need to hunt for an Xperia and begin testing/debuggin. :fingers-crossed:
HUGE update released! V2.0 Hope you all like it. =)
Thanks a lot for sharing your app, it looks grate but unfortunately it is not working with my Galaxy note 10.1
Sent from my GT-N8000 using XDA Premium HD app
I like it! Works fine in my SII stock rom. It will be perfect if i could enable a sound notification when turns off the screen. Not really necessary but cool 4 me (car unlock beep-beep)
Thanks mate!
Frank
thanks for the update
working good.
I'm working on adding a widget and changing the design, but if anyone has any better suggestions, I'd love to hear them because design is not as important as functionality.
Love it. great app, and working fine on both my LG Optimus 3D and Samsung Galaxy Note II.
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
won't this drain battery
mikeschevelle said:
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
Click to expand...
Click to collapse
Yea, it's unfortunate that foregrounding requires the notification icon. You could try using the app without foregrounding, it works for some people. Adding more notification icons should be easy, won't take much time. =) Which ones do you think I should add? A small black dot would disappear on most black status bars (but it'll look like there's an empty space in the status bar so it'll look a little weird)...
skyrocketeer said:
won't this drain battery
Click to expand...
Click to collapse
The proximity sensor uses very little battery and the app itself is pretty light (4-5MB RAM). So far I've only gotten one deep sleep complaint out of 3500+ downloads but no battery issues.
im fine with the black dot, it will keep my bar looking empty
mikeschevelle said:
im fine with the black dot, it will keep my bar looking empty
Click to expand...
Click to collapse
Finally! Found a way to completely remove the icon and the notification from the status bar when the app is foregrounded. It'll be in the next update (today or tomorrow). It can still be enabled manually from the Notifications section but yea, enjoy the emptiness of your status bar. xP
Pretty Huge Update. Hope you like it!
Version 3.0
-Added Screen On Fix for some phones (Enable in settings)
-Status Bar Notification/Icon will no longer automatically show up when app is foregrounded.
-Added Pocket Mode
-Added Table Mode
-Added Widget
-Fixed Screen On/Off Actions bug
One thing I notice (which is NO WHERE CLOSE to a big deal)
The launcher I use (Nova) I hide the status bar and use a gesture to bring it down. When ever Intellicover turns the screen on, the status quickly shows itself and then goes back hidden, not more than a half second of this, but I cannot select anything on the screen until after that status bar thing happens
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Turns my dumb flip cover on my note 2 into a smart cover. Thanks
Sent from my SPH-L900 using xda premium
garfnodie said:
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Click to expand...
Click to collapse
Actually, that shouldn't be happening. Once set you never have to see it again. I'm not quite sure what could be triggering this but if you could provide a little information about the OS/phone model/etc. I could try to get a hold on the device and try to replicate the error...
Hi,
I would like to use Tasker to control screen on/off times based on following conditions:
1) Keep screen on when reading/using mobile:
a)IF SCREEN IS ON: If handset is in vertical position (reading position), either in portrait or landscape depending on orientation set in android then screen should stay on. This would presume mobile is being used.
b) When handset is laid down on table then screen should turn off after 7 secs automatically or when screen is manually turned off.
note: It would be nice to have a window period of 10 secs after screen off wherein if the handset is picked up within that period, (after the initial 7 secs and before another 10 secs) then screen automatically turns on.
2) NOTIFICATIONS
If notifications are received, have a window period of 15-30 secs where if position of android is changed from desk horizontal to vertical then screen automatically comes on without the need to press power button.This presumes we picked up mobile to view the notification event.
Again first rule applies and screen stays on when reading and turns off auto or manually as per first rule
I have tried but not able to configure rules.
One conflict in mind:-
What if mobile is kept in trouser pocket and notifications are received? Here the gyro won't change as it will go from vertical to vertical position....how to deal with that? Also rule 2 should not auto trigger upon receiving notifications, sensing orientation is vertical when in trouser pocket.
Any help?
Thanks in advance
About the conflict, I think I saw that you can implement a profile that check if your face is in front of the tablet or not (like on S3).
As a personal comment, I would go all way to this aproach: check if you are in front of the camera and decide when to turn screen on.
okty2k said:
About the conflict, I think I saw that you can implement a profile that check if your face is in front of the tablet or not (like on S3).
As a personal comment, I would go all way to this aproach: check if you are in front of the camera and decide when to turn screen on.
Click to expand...
Click to collapse
Hi,
The problem with using the front camera is that it will cause battery drain. The camera would constantly have to keep checking for movement and this would definitely drain battery. I am more inclined to use the gyro for this.
I agree with you, but you can at least double the gyro with camera check. even if it will consume some battery, it will avoid other problems.
Or maybe you can also use the proximity sensor?
Another way I can think is to try and detect the shakes (combination of proximity and gyro). Considering the power of Tasker, I think it can be done.
If you manage to succeed, please let me know. I am also interested in something like this, I just never have the time to build such complex scenarios.
okty2k said:
I agree with you, but you can at least double the gyro with camera check. even if it will consume some battery, it will avoid other problems.
Or maybe you can also use the proximity sensor?
Another way I can think is to try and detect the shakes (combination of proximity and gyro). Considering the power of Tasker, I think it can be done.
If you manage to succeed, please let me know. I am also interested in something like this, I just never have the time to build such complex scenarios.
Click to expand...
Click to collapse
I could not get it to work thats why asking for help.
I got my OP7 Pro today. Double tap to wake with screen off doesn't seem to work. Anyone know what the secret is? What am I missing?
jdgesmlls said:
I got my OP7 Pro today. Double tap to wake with screen off doesn't seem to work. Anyone know what the secret is? What am I missing?
Click to expand...
Click to collapse
You have to turn it on in display settings under ambient display. It's turned off by default, or at least mine was as well as pickup to show.
None of my screen off gestures are working...
truckerdewd said:
You have to turn it on in display settings under ambient display. It's turned off by default, or at least mine was as well as pickup to show.
Click to expand...
Click to collapse
I think he means the feature is broken. It's not working for a bunch of us after the day-one update. It works when it wants to. OnePlus has done nothing to fix this and I'm just about ready to get my money back. Just because it's working fine for you doesn't mean we're doing something wrong.
Yeah, lock screen gestures and single/double tap don't work on the latest update, but I believe they're working on fixing it, going through repro steps right now according to their bug page. I'm sure it'll get fixed soon, and it's not a make or break issue to me by any means.
What version are you guys on?
I'm on oxygen 9.5.5 T-mobile gm1915 not having any issues.
I came here to find this out. It's works randomly.
I don't know what I did, but it is working now. I have rebooted twice and it has persisted so +1 on the issue being random. I more wanted to know if others were experiencing the same behavior. Thanks for the replies!
Having tested this, It works randomly during low light situations, and all the time in normal/extreme light situations, such as outside in the sun or in a bright room.
EchoX860 said:
Having tested this, It works randomly during low light situations, and all the time in normal/extreme light situations, such as outside in the sun or in a bright room.
Click to expand...
Click to collapse
Yup. This is my issue.
So my double tap to wake completely stopped working. Single tap doesn't work at all either. Not happy at all right now. Completely stopped about a half hour ago. Reboots fix nothing.
Got my phone yesterday and rooted 10 min after opening it and took update to 9.5.3. no issues at work double or single tap to wake. Used it all night setting it up and playing with it. Lit room or dark. It's been pretty consistent so far. There is an occasional time I have to tap a second time but still work on the 2nd try.
Not sure why it's random like that. Only thing I can think of is after the update... Did any of you do a factory reset? Maybe some reminant install files are causing some issues
Eric214 said:
Got my phone yesterday and rooted 10 min after opening it and took update to 9.5.3. no issues at work double or single tap to wake. Used it all night setting it up and playing with it. Lit room or dark. It's been pretty consistent so far. There is an occasional time I have to tap a second time but still work on the 2nd try.
Not sure why it's random like that. Only thing I can think of is after the update... Did any of you do a factory reset? Maybe some reminant install files are causing some issues
Click to expand...
Click to collapse
I must be blind but how do you unlock the bootloader and root this phone? Thx
equlizer said:
I must be blind but how do you unlock the bootloader and root this phone? Thx
Click to expand...
Click to collapse
In developer options you have to turn on oem unlocking and USB defining. Have ADB and fastboot SDK installed on PC. Then while in the bootloader type... Fastboot oem unlock.
To root you need Magisk. Follow this thread
https://forum.xda-developers.com/oneplus-7-pro/how-to/guide-root-oneplus-7-pro-patched-boot-t3931205
The people here saying that it has to do with light are right. I have tested this myself. Even in fairly lit rooms, if the light isn't shining directly on the ambient light sensor, Ambient Display, double-tap-to-wake, and lift-to-wake are all completely disabled. If you shine a flashlight on the light sensor, they suddenly become available. This means that if you aren't using the phone in broad daylight or VERY well lit rooms, you have to hit the power button. Aside from the inconsistency of functionality that creates, I haven't used a power button to wake my phone in 3 years. I certainly hope they plan to fix this soon, as I'm of a mind to return the phone right now. This makes it very annoying to use on a daily basis for me. I keep my house fairly dark at night when I'm watching TV.
For some reason, OnePlus has it using the ambient light sensor rather than the proximity sensor and/or gyroscope for these features. This is not how it should work.
greyhulk said:
The people here saying that it has to do with light are right. I have tested this myself. Even in fairly lit rooms, if the light isn't shining directly on the ambient light sensor, Ambient Display, double-tap-to-wake, and lift-to-wake are all completely disabled. If you shine a flashlight on the light sensor, they suddenly become available. This means that if you aren't using the phone in broad daylight or VERY well lit rooms, you have to hit the power button. Aside from the inconsistency of functionality that creates, I haven't used a power button to wake my phone in 3 years. I certainly hope they plan to fix this soon, as I'm of a mind to return the phone right now. This makes it very annoying to use on a daily basis for me. I keep my house fairly dark at night when I'm watching TV.
For some reason, OnePlus has it using the ambient light sensor rather than the proximity sensor and/or gyroscope for these features. This is not how it should work.
Click to expand...
Click to collapse
But it seems it's different from device to device ? Double tap to wake, the lift feature and the only one tap to activate ambient light works in all light conditions for me.
Just a thought....is there an option to avoid accidental touches when in a pocket? This might explain why it works in well lit rooms and not in dark rooms.
greyhulk said:
The people here saying that it has to do with light are right. I have tested this myself. Even in fairly lit rooms, if the light isn't shining directly on the ambient light sensor, Ambient Display, double-tap-to-wake, and lift-to-wake are all completely disabled. If you shine a flashlight on the light sensor, they suddenly become available. This means that if you aren't using the phone in broad daylight or VERY well lit rooms, you have to hit the power button. Aside from the inconsistency of functionality that creates, I haven't used a power button to wake my phone in 3 years. I certainly hope they plan to fix this soon, as I'm of a mind to return the phone right now. This makes it very annoying to use on a daily basis for me. I keep my house fairly dark at night when I'm watching TV.
For some reason, OnePlus has it using the ambient light sensor rather than the proximity sensor and/or gyroscope for these features. This is not how it should work.
Click to expand...
Click to collapse
Yes! That reproduces the issue exactly for me. I am sure this is not the only one, but this thread on OnePlus support forums reports the issue.
https://forums.oneplus.com/threads/oneplus-7-pro-ambient-display-not-working.1034009/
You can see users reporting the problems inconsistency, and OnePlus seems to acknowledge the problem and they are "looking into it". Please go add your feedback as I am sure the more people that complain, the higher priority the bug will become.
.vermilion said:
But it seems it's different from device to device ? Double tap to wake, the lift feature and the only one tap to activate ambient light works in all light conditions for me.
Click to expand...
Click to collapse
This is where the inconsistency of the issue occurs... I am in my office which is lit the same way each day since I got the device (low light). The off screen gestures magically started working about 6 hours after I got the phone and were working up until this morning. Put the device close to a light source while the screen is dark, and you will see it wake up with no interaction with the screen. Screen off gestures work while in that lighting. I forced closed, cleared storage/cache of the Ambient display service and my phone now works in all lighting. It is almost as if the sensor becomes stuck in 'pocket mode' or something like that.
I noticed some funny:
Which cases are you using?
I was with the one in the box until now and everything worked fine (ambient display, double tap to wake, one tap to show fingerprint, wake when lifting up the phone,...). I'm with the Nylon case since a few minutes and since then the ambient display won't work anymore.
Maybe there's something related?
jdgesmlls said:
This is where the inconsistency of the issue occurs... I am in my office which is lit the same way each day since I got the device (low light). The off screen gestures magically started working about 6 hours after I got the phone and were working up until this morning. Put the device close to a light source while the screen is dark, and you will see it wake up with no interaction with the screen. Screen off gestures work while in that lighting. I forced closed, cleared storage/cache of the Ambient display service and my phone now works in all lighting. It is almost as if the sensor becomes stuck in 'pocket mode' or something like that.
Click to expand...
Click to collapse
Yes, you're totally right! I tested it! When light is shining on the display, my tap gestures will work again. I forced closed and cleared storage of ambient display but unfortunately it doesn't change my current situation, at the moment it won't work... ?
I can confirm this as well. In dark or even dim rooms, I must use the power button to turn the screen on, in well lit environments, I can use tap to wake. Hopefully this can be fixed in an upcoming update.
Sent from my GM1915 using Tapatalk