Database Info

Partitions

Hello everyone,
I don't know much about partitions but I know something is not right with mine
So, A few days ago my phone got bricked because I flashed crDroid rom. (I did something wrong)
So, after a lot of research, I found an solution to unbrick my phone. So it worked, I booted into software again and I was free to use.
So later, I decided to install an custom rom again (Havoc OS). I installed the rom but after I clean flashed the rom, I got stuck on booting logo.
So, I thought lets see what partition B does. So I booted into partition B and I got stuck on the logo of TWRP. Not sure why.
I really wanna know why this happend and how to fix my device.
(Btw, now my phone is working again and I am on stock os with rooted using Magisk 16,7.)
But just wanna know what I did wrong
I used the instruction in this thread: https://forum.xda-developers.com/oneplus-6/development/enchilada-romcrdroid-t3827070. And after I did that it got bricked.
I hope anyone knows what happend and how to fix my partition!
Friendly regards,
Crewz

Hi, why you get stuck and what not is because you simply do not follow the instructions 100%
After rom install and twrp install did you reboot? When you reboot at that point it will change partition.
If you get stuck on boot again, try reflash rom (without wipes), flash twrp, reboot to recovery, flash gapps and start the device. Apply root after setup this time just to be sure. Another thing could also be magisk, some roms require a later magisk version. But like I said, root after setup just to be sure where the issue is . Happy flashing mate!

whizeguy said:
Hi, why you get stuck and what not is because you simply do not follow the instructions 100%
After rom install and twrp install did you reboot? When you reboot at that point it will change partition.
If you get stuck on boot again, try reflash rom (without wipes), flash twrp, reboot to recovery, flash gapps and start the device. Apply root after setup this time just to be sure. Another thing could also be magisk, some roms require a later magisk version. But like I said, root after setup just to be sure where the issue is . Happy flashing mate!
Click to expand...
Click to collapse
I did the exact steps as in the thread.

ItsCrewz said:
I did the exact steps as in the thread.
Click to expand...
Click to collapse
If you're booted up and stable there's nothing wrong with your partitions.
What version of twrp are you using?

iElvis said:
If you're booted up and stable there's nothing wrong with your partitions.
What version of twrp are you using?
Click to expand...
Click to collapse
The newest one.
Look when I boot into TWRP and switch to partition B. I am stuck at logo of twrp

ItsCrewz said:
The newest one.
Look when I boot into TWRP and switch to partition B. I am stuck at logo of twrp
Click to expand...
Click to collapse
Which version? There are multiple "newest" ones.
Just because you have two slots doesn't mean both are bootable. The intent of the A/B arrangement is to allow seamless updates, not create a dual-boot phone. The inactive slot is often not bootable or will boot up with things broken. It's inactive because it's not suppose to be booted.
Switching slots manually is rarely necessary anyway. Why do you need to do it?

iElvis said:
Which version? There are multiple "newest" ones.
Just because you have two slots doesn't mean both are bootable. The intent of the A/B arrangement is to allow seamless updates, not create a dual-boot phone. The inactive slot is often not bootable or will boot up with things broken. It's inactive because it's not suppose to be booted.
Switching slots manually is rarely necessary anyway. Why do you need to do it?
Click to expand...
Click to collapse
Yes I know what it means. But it isn't normal that it boots into twrp and get stuck on the logo

disabled encryption

I have successfully decrypted my essential phone using the dm verity disabler by zackptg. Need to test it some more, but twrp boots after flashing it, instantly.it doesn't have that lag

jacksummers said:
I have successfully decrypted my essential phone using the dm verity disabler by zackptg. Need to test it some more, but twrp boots after flashing it, instantly.it doesn't have that lag
Click to expand...
Click to collapse
were u rooted before or not? did u have to format everything in twrp?
edit it actually works!!!!!! I'm unencrypted...i can go into twrp while a pin is set....i can flash magisk with first boot of a rom and it boots...!!!!!

This is a huge advancement. I didn't think it worked until I booted into twrp. And it was instantaneous.so before I flashed the dm verity decryption zip, I did indeed wipe everything on both slots, then mounted system in twrp and flashed the zip, then I flashed the ROM.i will be switching back to stock to test if it stays decrypted later today. I'm running a gsi,(benzo ROM+ all my own customizations)rooted,with all the trimmings) the same mentality will have to follow, but it will be interesting to see how it goes with flashing stock fresh. I imagine restoring my nandroid will be fine and stay decrypted, but probably will have to flash stock, then after setup, back to twrp, wipe factory reset and flash the dm verity decryption zip..I think, I gotta just do it to be sure. Anyone who does this should share notes and that will help the community.
Here is a good question, wtf can I do to have lte again. ever since pie official, I lost lte.phone drops to 3g during calls only. I discovered this while searching for a fix for my volte. Hence,, switching to gsi's because they don't have volte and neither does my stock, even with fresh installs.i have t mobile.all the betas it worked fine.

Here's the thread folks
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Thanks to Zackptg

jacksummers said:
This is a huge advancement. I didn't think it worked until I booted into twrp. And it was instantaneous.so before I flashed the dm verity decryption zip, I did indeed wipe everything on both slots, then mounted system in twrp and flashed the zip, then I flashed the ROM.i will be switching back to stock to test if it stays decrypted later today. I'm running a gsi,(benzo ROM+ all my own customizations)rooted,with all the trimmings) the same mentality will have to follow, but it will be interesting to see how it goes with flashing stock fresh. I imagine restoring my nandroid will be fine and stay decrypted, but probably will have to flash stock, then after setup, back to twrp, wipe factory reset and flash the dm verity decryption zip..I think, I gotta just do it to be sure. Anyone who does this should share notes and that will help the community.
Here is a good question, wtf can I do to have lte again. ever since pie official, I lost lte.phone drops to 3g during calls only. I discovered this while searching for a fix for my volte. Hence,, switching to gsi's because they don't have volte and neither does my stock, even with fresh installs.i have t mobile.all the betas it worked fine.
Click to expand...
Click to collapse
How did u get wifi to work on gsi..for me i can seem to get it working..and im using the last 8.1 vendor....for the lte go into dialer and *#*#4636#*#* and change the lte/utms/cdma setting around until u get it

Tech_Savvy said:
How did u get wifi to work on gsi..for me i can seem to get it working..and im using the last 8.1 vendor....for the lte go into dialer and *#*#4636#*#* and change the lte/utms/cdma setting around until u get it
Click to expand...
Click to collapse
I have found that after booting up a gsi, factory reset it. Then be sure not to root with magisk. Every time I tried it killed my data and wifi. Use phhhsuperuser ab zip. I think I may have had to flash my modem.img a time as well after the initial install.
And yeah I got it kinda, still no lte. I'm gonna try a modem img from the pie firmware..I think it is the problem

Has anyone had success in decrypting on stock? I cant get it and then i lose touch with the phone booted up. So in other words do not try to decrypt stock. U will wreck your phone and the only way to fix it is to flash stock via fastboot AND adb sideload. One or the other doesnt fix it for some reason. Has to be both.

jacksummers said:
Has anyone had success in decrypting on stock? I cant get it and then i lose touch with the phone booted up. So in other words do not try to decrypt stock. U will wreck your phone and the only way to fix it is to flash stock via fastboot AND adb sideload. One or the other doesnt fix it for some reason. Has to be both.
Click to expand...
Click to collapse
Were you trying on stock oreo or pie?

governmentissuejoe said:
Were you trying on stock oreo or pie?
Click to expand...
Click to collapse
Both

jacksummers said:
Both
Click to expand...
Click to collapse
I tried it on stock Oreo and it works.

governmentissuejoe said:
I tried it on stock Oreo and it works.
Click to expand...
Click to collapse
Ok cool, I was worried I did this as a fluke. What was the steps u did?

jacksummers said:
Ok cool, I was worried I did this as a fluke. What was the steps u did?
Click to expand...
Click to collapse
So these are all the steps I took to get it to work. All of these steps may or may not be necessary. I used aer0zer0's stock dump for the lastest release of oreo and flashed the wipe all bat. It did its thing and wiped and flashed on both slots. I booted into the rom and finished initial setup and enabled adb in developer settings. I rebooted to bootloader and flashed twrp to inactive slot. I booted into recovery and selected the format data option and typed yes. I rebooted to bootloader and reflashed twrp. When I booted into recovery I transferred the stockboot.img, magisk 17.1 zip, and disable encryption zip to the phone. I flashed the stockboot.img to the boot partition. I then flashed the disable encryption zip. I then mounted the system partition and flashed the magisk zip. Finally, I rebooted into the rom and set pin and fingerprint. I installed EX Kernel Manager and created a backup of the decrypted magisked boot.img just in case. I flashed twrp through ex kernel manager and rebooted to recovery. Everything stayed decrypted. I flashed my newly created boot.img backup and booted back to my rom. Thats it. I hope I remembered everything. I hope this helps. Again, I do not know if all the steps I took are required but it worked for me.

guys question regarding flashing custom roms/oos ?

id like to know if it is possible to flash OOS without needing to wipe the internal SD somehow?
i always flash custom roms to another custom rom without needing to wipe internal sd and thats rly cool.
but whenever i flash oos i use those fastboot zips and it wipes my internal SD.
is there some way to get OOS to boot up when i am on a custom rom ?
so question is , can i flash stock OOS while i am on a custom rom without wiping my internal sd.
if yes please guide me how to do it !
edit : So e.g i have this flashable zip of the latest oos "OnePlus6Oxygen_22_OTA_015_all_1808102118_770880.zip" can i somehow flash it within twrp and get it to boot up without wiping my internal sd ?
i had tried it before and i just couldnt get it to boot up.

It is best practise to wipe your data if your coming from another rom Otherwise you will get some error.

leondestiny said:
id like to know if it is possible to flash OOS without needing to wipe the internal SD somehow?
i always flash custom roms to another custom rom without needing to wipe internal sd and thats rly cool.
but whenever i flash oos i use those fastboot zips and it wipes my internal SD.
is there some way to get OOS to boot up when i am on a custom rom ?
so question is , can i flash stock OOS while i am on a custom rom without wiping my internal sd.
if yes please guide me how to do it !
edit : So e.g i have this flashable zip of the latest oos "OnePlus6Oxygen_22_OTA_015_all_1808102118_770880.zip" can i somehow flash it within twrp and get it to boot up without wiping my internal sd ?
i had tried it before and i just couldnt get it to boot up.
Click to expand...
Click to collapse
You can flash the full ROM in TWRP. The full steps are to flash full ROM zip, flash TWRP zip, reboot recovery, flash magisk, reboot. Data stays in tact. SD stays in tact. There is absolutely no reason to wipe sdcard and anyone who tells you is full of crap. The only reason to wipe sdcard is to decrypt your device.
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
leondestiny said:
id like to know if it is possible to flash OOS without needing to wipe the internal SD somehow?
i always flash custom roms to another custom rom without needing to wipe internal sd and thats rly cool.
but whenever i flash oos i use those fastboot zips and it wipes my internal SD.
is there some way to get OOS to boot up when i am on a custom rom ?
so question is , can i flash stock OOS while i am on a custom rom without wiping my internal sd.
if yes please guide me how to do it !
edit : So e.g i have this flashable zip of the latest oos "OnePlus6Oxygen_22_OTA_015_all_1808102118_770880.zip" can i somehow flash it within twrp and get it to boot up without wiping my internal sd ?
i had tried it before and i just couldnt get it to boot up.
Click to expand...
Click to collapse
Also, stop using fastboot ROMs. It will wipe your data. It is meant for an emergency recovey, not for regular flashing.

mikex8593 said:
You can flash the full ROM in TWRP. The full steps are to flash full ROM zip, flash TWRP zip, reboot recovery, flash magisk, reboot. Data stays in tact. SD stays in tact. There is absolutely no reason to wipe sdcard and anyone who tells you is full of crap. The only reason to wipe sdcard is to decrypt your device.
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
Also, stop using fastboot ROMs. It will wipe your data. It is meant for an emergency recovey, not for regular flashing.
Click to expand...
Click to collapse
thank you so much man, i initially had no idea ..
i thought for OOS stock roms id always need to wipe sd as it is a A/B device
thats why i often stayed away from oos.
but hot damn oos pie beta is so snappy and smooth..
same goes for Oreo oos stock what i find lots better is the speed /smoothness it blows custom roms out of the water..
and i even noticed that the FP sensor works a lot faster on oos.. in custom roms fp feels slow to unlock phone.
whereas on oos its instant.
i only wish stock oos had FLING.... the only reason i use custom roms at times is the usage of Fling..

leondestiny said:
thank you so much man, i initially had no idea ..
i thought for OOS stock roms id always need to wipe sd as it is a A/B device
thats why i often stayed away from oos.
but hot damn oos pie beta is so snappy and smooth..
same goes for Oreo oos stock what i find lots better is the speed /smoothness it blows custom roms out of the water..
and i even noticed that the FP sensor works a lot faster on oos.. in custom roms fp feels slow to unlock phone.
whereas on oos its instant.
i only wish stock oos had FLING.... the only reason i use custom roms at times is the usage of Fling..
Click to expand...
Click to collapse
The a/b makes ota updates easier. While booted in system a, an OTA will flash to b while the OS is still running and after a reboot, it will boot to b, and vice versa. The reason for a reboot recovery after flashing stock oos zip and TWRP zip is to get TWRP to flash on the correct slot. You can change it manually in TWRP, but that method requires you to keep track of your slot. A simple reboot of recovery will put it on the correct slot to flash magisk. Without flashing magisk, bootloop will happen.
---------- Post added at 04:04 PM ---------- Previous post was at 03:57 PM ----------
leondestiny said:
thank you so much man, i initially had no idea ..
i thought for OOS stock roms id always need to wipe sd as it is a A/B device
thats why i often stayed away from oos.
but hot damn oos pie beta is so snappy and smooth..
same goes for Oreo oos stock what i find lots better is the speed /smoothness it blows custom roms out of the water..
and i even noticed that the FP sensor works a lot faster on oos.. in custom roms fp feels slow to unlock phone.
whereas on oos its instant.
i only wish stock oos had FLING.... the only reason i use custom roms at times is the usage of Fling..
Click to expand...
Click to collapse
I also forgot! Delete your lock screen before flashing another ROM. That is why your sdcard is inaccessible. If you delete it before going to TWRP, it will automatically decrypt since the password would be technically nothing.

A/B slot questions

I tend to mess things up when flashing new ROMs on my Oneplus6. And I usually end up using the MSMdownloadtool to 'fix my phone' again.
* Does MSMdownloadtool install OOS on both slots?
* What do you advise to do before installing a custom (v10) rom?
* I tried doing a fastboot OOS install by mauronofrio, it didnt work. I got into bootloops after running/finishing the flash all bat file. So I used MSMdownloadtool again. I wondered if the fastboot OOS installer guide by mauronofrio installs OOS on both slots??
* Does the fastboot OOS installer do the same thing as MSMdownloadtool?
* In a lot of guides for clean install custom rom I read as first step: wipe system/data. But then I wonder why do you have to install the correct OOS version first, THEN wipe it, and then install custom ROM. Does an OOS installation leave some hidden (essential) files/partitions behind or something?
* Do you guys switch slots in twrp / or do you reboot to switch slots / or do you use the fastboot --set-active a/b command?
* Why does gapps only have to be installed on 1 slot and not on both?
* Why don't custom ROMS install themselves on both slots straight away, like when you flash the twrp installer zip.. ?
Im currently running carbonROMv8 ROM, its running fine so Im not looking to change yet. But im sure im gonna have to use msmdowndtool again when I wanna try out some other ROM in the future. I dont really feel like im having any control off the flashing process. It either works or it doesnt and when it doesnt I cant explain why..

dumbl3 said:
I tend to mess things up when flashing new ROMs on my Oneplus6. And I usually end up using the MSMdownloadtool to 'fix my phone' again.
* Does MSMdownloadtool install OOS on both slots?
* What do you advise to do before installing a custom (v10) rom?
* I tried doing a fastboot OOS install by mauronofrio, it didnt work. I got into bootloops after running/finishing the flash all bat file. So I used MSMdownloadtool again. I wondered if the fastboot OOS installer guide by mauronofrio installs OOS on both slots??
* Does the fastboot OOS installer do the same thing as MSMdownloadtool?
* In a lot of guides for clean install custom rom I read as first step: wipe system/data. But then I wonder why do you have to install the correct OOS version first, THEN wipe it, and then install custom ROM. Does an OOS installation leave some hidden (essential) files/partitions behind or something?
* Do you guys switch slots in twrp / or do you reboot to switch slots / or do you use the fastboot --set-active a/b command?
* Why does gapps only have to be installed on 1 slot and not on both?
* Why don't custom ROMS install themselves on both slots straight away, like when you flash the twrp installer zip.. ?
Im currently running carbonROMv8 ROM, its running fine so Im not looking to change yet. But im sure im gonna have to use msmdowndtool again when I wanna try out some other ROM in the future. I dont really feel like im having any control off the flashing process. It either works or it doesnt and when it doesnt I cant explain why..
Click to expand...
Click to collapse
Yoo.. So Many Questions. Will try to explain in easiest way..
1. Yes. It Does Flash OOS in Both Slot via Qualcomm Download Mode which is mainly for Manufactures to restore Device..
2. Let me clear that Most people's who face issue in booting custom ROM have their data encrypted by previous or stock ROM.
Here is Link Thread to know how to decrypt your device..
https://forum.xda-developers.com/oneplus-6/how-to/tutorial-decrypt-flash-rom-pie-oreo-roms-t3838643
My own Instructions to Flash Custom ROM (Strictly for Decrypted Device):-
Boot Into Recovery
Wipe Cache, Data & System
Flash Latest Stable/Beta OOS10 & Recovery
Reboot Into Recovery(Ignore No OS Installed Warning)
Flash Latest Stable/Beta OOS10 & Recovery again
Reboot Into Recovery
Now flash Custom ROM + Recovery(If Not Included)
Reboot Into Recovery
Flash Gapps(If not included in ROM), Magisk & No-Verity zip(to keep Device dencrypted)
Reboot & Done
For Installing Update on Same Custom ROM :-
Download the Update
Reboot Into Recovery
Flash Update ZIP & Recovery
Reboot Into Recovery
Flash Gapps(If not included in ROM), Magisk & No-Verity zip(to keep Device dencrypted)
Reboot & Done
3. Fastboot Don't always work if You try to Upgrade/Downgrade Android Version as it won't flash Critical Partitions.. Meanwhile MSMDownload tool Use Download mode which is more powerful.
4. Nope. Both are Different AS both use different mode to flash ROM.
5. Clean install required while flashing new custom ROM because Not All ROM uses Same Base. Some uses Stable OOS or some uses Beta OOS... Now, your answer is in these two build Types...
In my Opinion, Custom ROM have nothing to do with your System partition but it most like to related to Vendor Partition... Both Stable & Beta OOS Have little difference in Vendor partition data..
When any dev Build Any ROM, he uses any one of those Build as base for which he tweak/fix bugs.. That's why always Use Dev specified OOS build for avoid Bootloop/bugs..
6. I prefer last option as it's more reliable..
7. It's like when you clean install any ROM.. When you install Any ZIP, It get installed in an Inactive Slot which make those ZIP data Allowed to use in Active slot..
But when you update ROM for 1st time, You install Gapps as well.. So i don't think you need to Install Gapps on 2nd Update as it already installed in both slots.
1st time when Clean installed & 2nd time when Updated 1st time...
8. It's Because how A/B Partition works... Any zip you flash get installed in inactive slot & this applies to both Stock OOS & Custom ROM...
That's why we have to flash OOS twice before flashing any custom ROM.. Which confirms you will have same Vendor partition regardless to your current slot so when you flash custom ROM it will get booted anyways even after an update..
Hope that's helpful.. Any question or help, you can DM or reply here..

Thanks for your reply. It clears a few things up I think. I got a few follow up questions.
I don't really feel comfortable walking around with a decrypted phone. I have already been pick-pocketed once and also lost two smartphones. I would say the chances are likely that also my OP6 is gonna get lost at some point. Having it decrypted would leave it very vulnerable for people trying to access my files.
* So lets say I decrypt my phone. Is it possible then to encrypt the phone again after I have flashed a new ROM (for example LineageOS 17.1)?

dumbl3 said:
Thanks for your reply. It clears a few things up I think. I got a few follow up questions.
I don't really feel comfortable walking around with a decrypted phone. I have already been pick-pocketed once and also lost two smartphones. I would say the chances are likely that also my OP6 is gonna get lost at some point. Having it decrypted would leave it very vulnerable for people trying to access my files.
* So lets say I decrypt my phone. Is it possible then to encrypt the phone again after I have flashed a new ROM (for example LineageOS 17.1)?
Click to expand...
Click to collapse
Well, In my Opinion Every Device is Vulnerable to Hackers.. Doesn't matter if it's bootloader is Locked or Unlocked...
Your device is more Vulnerable at the time you unlocked bootloader because after that you can execute advanced commands with fastboot.....
If your device have pin/pattern, Thief gone reset your device anyway to reset pass.. Eventually your data get wiped as well....
Well, you can encrypt your data but you might face issue while migrating to other ROM if you face any bug + decrypting your encrypted device again is time taking process if you have alot of data..

I mean there is difference between someone being able to reset/delete my data than someone being able to read my data. As far as I know a thief cannot just read my data after he has stolen my device which is encrypted with unlocked bootloader. Sure, he can connect it to his computer and fastboot delete my sh!t but I don't care I got backups of my most important data anyway, as long as he/she cannot just read my device data its fine by me. But how would I encrypt my device again after I installed, lets say, LineageOS 17.1?

dumbl3 said:
I mean there is difference between someone being able to reset/delete my data than someone being able to read my data. As far as I know a thief cannot just read my data after he has stolen my device which is encrypted with unlocked bootloader. Sure, he can connect it to his computer and fastboot delete my sh!t but I don't care I got backups of my most important data anyway, as long as he/she cannot just read my device data its fine by me. But how would I encrypt my device again after I installed, lets say, LineageOS 17.1?
Click to expand...
Click to collapse
you can.. But do it only if you gone use it for long term....
Not fine to waste your whole day transfer your date from mobile to PC then PC to mobile..

how to know if it's a bootloop?

hello i was upgrading from stock 9.0.7 to 9.0.9, my bootloader is unlocked and twrp is a permanent one, the phone is also rooted. i wiped system then flashed the 9.0.9 then flashed the 4.0.4 twrp, rebooted into twrp, flashed latest magisk, rebooted into twrp and then pressed reboot into system. the phone is encrypted. the booting animation has been on for 20-30 minutes at this point. is it a bootloop? why what did i do wrong? thanks

@seth wellington
Try formatting data them reboot system. That should get you booted up.
Never wipe system or vendor on these devices and always when flashing a rom flash TWRP installer zip or you won't have twrp because of where recovery is located which is same place as boot.img and it has to be installed when flashing a rom or update to a rom or it won't be present.
How I flash OOS on my once T-Mobile now converted international/global OnePlus 6t.
Boot TWRP
Flash OOS global 10.3.6
Flash TWRP installer
Flash finalize
Format data
Reboot system
How I install a rom on my converted OnePlus 6t. This installation process varies depending on whether or not whatever rom I'm installing comes with gapps and or TWRP and of course you don't want to install global OOS on another model device. Since I converted my T-Mobile OnePlus 6t using guide and msm tool I now use global or international OnePlus 6t roms, firmware... Example Pixel Experience rom installation:
Boot TWRP
Flash OOS 10.3.6 global from repo xda thread
Flash Pixel Experience rom
Flash TWRP installer zip
Flash finalize zip
Format data
Reboot system.
Start to set up device then at some point enable developer options and usb debugging and doable any lock screen and boot twrp and flash magisk for root and reboot system. That is how I install a rom that has gapps but not twrp included in rom zip. Finalize can he found with a quick search on xda. It copies firmware to other slot on your AB partition device so that you don't have to. Saves 5-6 minutes and works great.
Edit
What you could have done is just flash your updated OOS , flash TWRP installer zip, reboot recovery, flash magisk, reboot system. That's what I would have done updating OOS ..
Hope this helps.
Sent from my OnePlus6T using XDA Labs

flash713 said:
@seth wellington
Try formatting data them reboot system. That should get you booted up.
Never wipe system or vendor on these devices and always when flashing a rom flash TWRP installer zip or you won't have twrp because of where recovery is located which is same place as boot.img and it has to be installed when flashing a rom or update to a rom or it won't be present.
How I flash OOS on my once T-Mobile now converted international/global OnePlus 6t.
Boot TWRP
Flash OOS global 10.3.6
Flash TWRP installer
Flash finalize
Format data
Reboot system
How I install a rom on my converted OnePlus 6t. This installation process varies depending on whether or not whatever rom I'm installing comes with gapps and or TWRP and of course you don't want to install global OOS on another model device. Since I converted my T-Mobile OnePlus 6t using guide and msm tool I now use global or international OnePlus 6t roms, firmware... Example Pixel Experience rom installation:
Boot TWRP
Flash OOS 10.3.6 global from repo xda thread
Flash Pixel Experience rom
Flash TWRP installer zip
Flash finalize zip
Format data
Reboot system.
Start to set up device then at some point enable developer options and usb debugging and doable any lock screen and boot twrp and flash magisk for root and reboot system. That is how I install a rom that has gapps but not twrp included in rom zip. Finalize can he found with a quick search on xda. It copies firmware to other slot on your AB partition device so that you don't have to. Saves 5-6 minutes and works great.
Edit
What you could have done is just flash your updated OOS , flash TWRP installer zip, reboot recovery, flash magisk, reboot system. That's what I would have done updating OOS ..
Hope this helps.
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Thank you very much for your reply. Unfortunately I couldn't wait for that long and I had to do something right then. After some attempts I also lost my twrp and was left without a functioning recovery, so I had to look for help and some people helped me go through unbricking through the msm tool.
The thing is i just really want to always flash clean so that the phone doesn't lag and works properly, I had no idea you shouldn't wipe system... The guide that I followed said that when updating oxygen manually you have to wipe system so I thought nothing would go wrong. I still don't know what caused a bootloop since that guide was a verified one. Thanks a lot for your help. So if I'm reading it correctly, you have to do the wipes after you've installed the system, not before?

seth wellington said:
Thank you very much for your reply. Unfortunately I couldn't wait for that long and I had to do something right then. After some attempts I also lost my twrp and was left without a functioning recovery, so I had to look for help and some people helped me go through unbricking through the msm tool.
The thing is i just really want to always flash clean so that the phone doesn't lag and works properly, I had no idea you shouldn't wipe system... The guide that I followed said that when updating oxygen manually you have to wipe system so I thought nothing would go wrong. I still don't know what caused a bootloop since that guide was a verified one. Thanks a lot for your help. So if I'm reading it correctly, you have to do the wipes after you've installed the system, not before?
Click to expand...
Click to collapse
Quit a few pretty well known developers here on xda (AOSiP op is one and there are more) say not to wipe system or vendor in their first posts of their custom rom threads. The way I describe how I install works 100% always and is the cleanest possible installation. Formatting data when installing a new rom at the end of install process does all the wiping needed to make sure nothing is left from the past and everything is clean. I used to wipe various partitions but on other devices. The install directions I use are originally from the PiXeN rom developers op. I've been flashing roms since the Nexus S days. Not saying that means anything other than I'm kinda old now. ? But that install process has never failed me once and I've flashed I'm sure hundreds of times on this device.. When I update i just flashing the updated rom over current and don't wipe anything then flashing twrp installer zip, reboot recovery flash magisk reboot system or if gapps are needed when I reboot recovery flash gapps..Unless it's a major OS update that's always worked for me.
Possibly not formatting data caused boot loop.. I know when going from OOS to AOSP rom format data is mandatory or it won't boot system.. I never flash magisk during initial flash. I always boot system first then at some point boot twrp and flash magisk. Try that next round and see if it turns out better. The whole AB partition deal made me feel like I was really old and retarded.
If I was updating OOS I would boot recovery, flash OOS, flash twrp installer zip reboot recovery, flash magisk, reboot system. Check out the finalize script xda thread. There are two here. The original person who made finalize has a thread and another user has another finalize thread. I believe in guides section of OnePlus 6t. With Android there are always more than a few ways to achieve something you know ... But what I post here is what I've been doing and I've flashed 400-500 times at least on this device.
Sent from my OnePlus6T using XDA Labs

@flash713
I totally trust you and respect anything you say and recommend me to do. Thanks a lot for all the instructions and clarification. I've been into android far less time than you — only since oneplus one. I'm extremely bad with tech but even with that phone j somehow managed to get bootloops or half-bricks ten times less than with the oneplus 6. And back then in 2015 I was way more enthusiastic: flashing twice a month loads and loads of roms. Of course it wasn't my personal achievement, I was still simply following detailed and carefully written instructions on forums on how to flash a particular rom in a particular way, but hey, at least I somehow managed it.
Now in this case I'm assuming it's the a/b partitions they've introduced that have completely changed the process and ways of flashing to the point that I stick to the guides and still get bootloops lol. That unbricking process was a huge stress for me, I don't think I'm going to touch anything in my phone for a while now. And I'm on the latest 10.3.6 oxygen so it's alright. Thank you for your help buddy

seth wellington said:
@flash713
I totally trust you and respect anything you say and recommend me to do. Thanks a lot for all the instructions and clarification. I've been into android far less time than you — only since oneplus one. I'm extremely bad with tech but even with that phone j somehow managed to get bootloops or half-bricks ten times less than with the oneplus 6. And back then in 2015 I was way more enthusiastic: flashing twice a month loads and loads of roms. Of course it wasn't my personal achievement, I was still simply following detailed and carefully written instructions on forums on how to flash a particular rom in a particular way, but hey, at least I somehow managed it.
Now in this case I'm assuming it's the a/b partitions they've introduced that have completely changed the process and ways of flashing to the point that I stick to the guides and still get bootloops lol. That unbricking process was a huge stress for me, I don't think I'm going to touch anything in my phone for a while now. And I'm on the latest 10.3.6 oxygen so it's alright. Thank you for your help buddy
Click to expand...
Click to collapse
Np. My real first name is Seth. Haha. Cool name btw. I just installed OOS 10.3.7 on my 6t. I was notified of the update yesterday via oxygen updater app from play store. Good handy app to have. I would have never known 10.3.7 was out or at least not so soon if it wasn't for that app. I believe it auto notified me too. I don't remember setting it up. Android has changed soooo much you know.. I love my OnePlus 6t though. Definitely one of my most favorite devices I've ever used. What's new today is gone at some point and replaced with "better.." lol. Not always better imo anyway. Glad I could help. Feel free to message me any time. Good day to you.