For those who use any official MIUI release (be it Global or Chinese, Stable or Dev):
Download your GSI of preference from Treble-compatible Devices Development section of XDA to your PC. Make sure you download an ARM64 A-only version.
In TWRP on your phone, hit Wipe and then Format Data and confirm it with typing „yes”
Connect your phone in fastboot mode to your PC
Open the command prompt in the folder where your fastboot.exe is located
Type: fastboot flash system path_to_your_GSI.img (Tip: you can also type fastboot flash system and drag and drop it on the command prompt window)
Type: fastboot reboot
The device should reboot to your freshly installed GSI.
For those who use xiaomi.eu ROM: (YMMV, it worked for me so I put it here, see below if it doesn't work for you)
Download your GSI of preference from Treble-compatible Devices Development section of XDA to your PC. Make sure you download an ARM64 A-only version.
Download vendor.img from here to your PC. You can also use any official vendor.img provided in official Xiaomi fastboot firmware packages if you know what you’re doing.
In TWRP on your phone, hit Wipe and then Format Data and confirm it with typing „yes”
Connect your phone in fastboot mode to your PC
Open the command prompt in the folder where your fastboot.exe is located
Type: fastboot flash system path_to_your_GSI.img (Tip: you can also type fastboot flash system and drag and drop it on the command prompt window)
Type: fastboot flash vendor path_to_your_vendor.img (you can drag and drop as well)
Type: fastboot reboot
Alternate, easier (and preferred) way:
Download and flash any official MIUI release like this one here
Follow instructions for official MIUI releases above
The device should reboot to your freshly installed GSI.
How to pass SafetyNet on GSI:
Download the latest Magisk 16.6 and flash it through TWRP
Reboot
In Magisk Manager app, open the side menu and tap Download
Download MagiskHide Props Config, install it and reboot
After reboot, go to Setting and Developer Options and enable Terminal app, right under ADB debugging option
A Terminal app should appear in your apps list. If not, you can also use any terminal emulator app from Play Store
Type „su”, hit enter and grant root permissions
Type „props” and hit enter
Type „1”, hit enter
Type „f”, hit enter
Type „11”, hit enter
Type „7”, hit enter
Type „y”, hit enter
Type „y”, hit enter and your device will reboot
If you care about auto-brightness (which i bet you do), you can also set the module manually to Mi MIX 2S fingerprint:
Follow steps 1-9 from above
Type:
Code:
Xiaomi/polaris/polaris:8.0.0/OPR1.170623.032/V9.5.19.0.ODGMIFA:user/release-keys
and hit enter (thanks @cnrd for the tip!)
Type "y", hit enter
Type "y", hit enter and your device will reboot
After booting successfully, your device will pass SafetyNet, you can check it in Magisk Manager. Tested on my Chinese (XE model) device with the latest Resurrection Remix official GSI, Google Pay is working fine.
Using the Mi 6 ctsProfile kills the background light (at least on phh-treble), use the Mi Mix 2S profile instead:
Code:
Xiaomi/polaris/polaris:8.0.0/OPR1.170623.032/V9.5.19.0.ODGMIFA:user/release-keys
cnrd said:
Using the Mi 6 ctsProfile kills the background light (at least on phh-treble), use the Mi Mix 2S profile instead:
Code:
Xiaomi/polaris/polaris:8.0.0/OPR1.170623.032/V9.5.19.0.ODGMIFA:user/release-keys
Click to expand...
Click to collapse
Added, thanks!
Great tutorial, thank you very much!
Has anyone tried this with the latest pixel experience gsi? Resurrection Remix is running fine but pixel experience always reboots to the fastboot screen.
I used the instructions from the pixel experience thread, but without success. I read the whole thread again and again and did it step by step as mentioned to be sure not to miss any important steps. Not luck.
Can you try it with the Mix2S and confirm that it works and how you it?
Don't want to capture this thread. I'm just desperately trying to get this done to boot.
Best regards
Kleinholzinferno
Thanks for the explain.
Is the OP using this method on a different device? I don't recall seeing any ROMs for the Mix 2S.
napes22 said:
Thanks for the explain.
Is the OP using this method on a different device? I don't recall seeing any ROMs for the Mix 2S.
Click to expand...
Click to collapse
OP is using a Treble ROM. If you go to the Treble section of XDA, there's a bunch of ROMs that will work for the 2s. Instead of flashing a device specific zip file you can flash a generic image file that will work on any phone that supports treble, like the Mi Mix 2s.
This guide walks you through flashing those images, and getting Magisk to work on the 2s.
russphil said:
OP is using a Treble ROM. If you go to the Treble section of XDA, there's a bunch of ROMs that will work for the 2s. Instead of flashing a device specific zip file you can flash a generic image file that will work on any phone that supports treble, like the Mi Mix 2s.
This guide walks you through flashing those images, and getting Magisk to work on the 2s.
Click to expand...
Click to collapse
Thanks, although I had upgraded the Beta to 8.7.10, so probably won't be flashing anything until a workaround comes along. I'm waiting for someone to confirm if it's only for Redmi Note 5.
Thank you for the tutorial, maybe you could add the fact that you have to use the fastboot.exe from miflash.
I´ve used the Minimal ADB and Fastboot Files but they make write Errors and the Rom won´t boot.
Hope I could try this method on my Mi 6X, will report back once I can unlock my Bootloader.
marcii-ec said:
Thank you for the tutorial, maybe you could add the fact that you have to use the fastboot.exe from miflash.
I´ve used the Minimal ADB and Fastboot Files but they make write Errors and the Rom won´t boot.
Click to expand...
Click to collapse
I've done it through Minimal ADB and Fastboot on Windows and through Fastboot on macOS and both work fine.
napes22 said:
Thanks, although I had upgraded the Beta to 8.7.10, so probably won't be flashing anything until a workaround comes along. I'm waiting for someone to confirm if it's only for Redmi Note 5.
Click to expand...
Click to collapse
You can check it if you reboot to Fastboot and see if "fastboot getvar anti" returns anything. If it does, your device has anti-rollback protection enabled.
As far as I know, anti-rollback is enabled on MIX 2S from 8.7.16 onwards, so you should be safe.
woofwoof75 said:
Hope I could try this method on my Mi 6X, will report back once I can unlock my Bootloader.
Click to expand...
Click to collapse
If your device is Treble-compatible, it should work with no problems, however keep in mind that should you run into any issues when using the provided fingerprint, you have to look up some from a stable MIUI for your device.
teddy74eva said:
You can check it if you reboot to Fastboot and see if "fastboot getvar anti" returns anything. If it does, your device has anti-rollback protection enabled.
As far as I know, anti-rollback is enabled on MIX 2S from 8.7.16 onwards, so you should be safe.
Click to expand...
Click to collapse
Yeah, when I run "fastboot getvar anti" I get invalid variable. Which leads me to believe that I don't have any issues at the moment. I won't upgrade from 12, but I'd like to move to Treble at some point.
EDIT: Just checked the "flash_all.bat" file within the 8.7.12 file and saw the following
::set CURRENT_ANTI_VER=1
::for /f "tokens=2 delims=: " %%i in ('fastboot %* getvar anti 2^>^&1 ^| findstr /r /c:"anti:"') do (set version=%%i)
::if [%version%] EQU [] set version=0
::if %version% GTR %CURRENT_ANTI_VER% (
Click to expand...
Click to collapse
Looks like 8.7.12 for Mi Mix 2S is not screwed.
Hello fellow gsi users. I'm new to this props editing thing and wanted to ask two questions for noobs.
If I follow the terminal commands in the OP the device fingerprint shows Xiaomi Mi 6 8.0.0 right? Is this right to use for the MiMix2S? I think so otherwise it wouldn't be mentioned to use.
And i don't understand the command for the auto brightness. What exactly does this do? Enable the automatic brightness settings from the original rom?
Need advice please. Maybe there's a thread that I haven't found yet that explains this topic. I'm eager to get more information but all I found was too general and not the answers I was looking for.
kleinholzinferno said:
Hello fellow gsi users. I'm new to this props editing thing and wanted to ask two questions for noobs.
If I follow the terminal commands in the OP the device fingerprint shows Xiaomi Mi 6 8.0.0 right? Is this right to use for the MiMix2S? I think so otherwise it wouldn't be mentioned to use.
And i don't understand the command for the auto brightness. What exactly does this do? Enable the automatic brightness settings from the original rom?
Need advice please. Maybe there's a thread that I haven't found yet that explains this topic. I'm eager to get more information but all I found was too general and not the answers I was looking for.
Click to expand...
Click to collapse
Basically, setting your fingerprint to Mi6 8.0 fools Google's checks of your installed system's certification, telling them that you are currently running a certified and tested Mi6 firmware. Every firmware has to follow Google's standards and rules for it to be able to fully use Google Services.
Now, I've included Mi6 fingerprint in my guide because it's readily available in MagiskHide Props, thus making it easier to set everything up to a workable state. However, as one user mentioned, if you use Mi6 fingerprint on MIX 2S, it breaks autobrightness. So, in order to be fully certified and keep autobrightness working, you can manually enter a fingerprint provided in the first post, which comes from MIX 2S 8.0 firmware. The only downside is that you have to be careful not to make any mistake when typing, so it's a little bit harder.
If you can live without autobrightness (since, as of now, it's terribly slow), feel free to use the Mi6 preset fingerprint. If you care or if you want to do things as they should be done, go for the manual route. Both of them will make your device Google certified and both of them will allow you to pass SafetyNet checks.
I may generalized some things or not mention them due to my lack of knowledge. If anybody would like to correct something, please do so
P.S. I may completely delete the preset fingerprint guide, as I don't think it's that hard to enter the proper fingerprint manually and it would definitely make things clearer.
Thank you very much for this information, makes everything much clearer for me.
Regarding auto brightness: I don't mind if it works for now, I can live with the manual settings. Better than a laggy auto settings thingy that doesn't worm properly.
The only thing that bothers me is that the screen is much too bright at night (or with night light activated) even in the lowest setting. Is there any possibility to change the minimum value?
Could you explain how to enter the proper fingerprint manually?
Best regards
Edit: nevermind the last question, I found it. In the newer version there's an entry for the mi mix 2s. Xiaomi devices are now listed under number 12, not 11 and the mi mix 2s is listed as own device. Works perfectly fine! Safety net passed, all green now!
Related
HI Guys , its me again so after a long working night of disabling encryptions and verifications i finaly was able to boot a AOSP Generic System Image on my LG G7 (EUROPEAN VARIANT ONLY) and now im here to show you how to install
How to install ?
Download the GSI from PHH AOSP thread , take a/b ones with ot without gapps as you like
Download my SecuretyOff-Vendor-image and my Permissive boot.img
Reboot to fastboot and unlock your bootloader if you havent done it yet (you can find tutorials online, same method as on g6 and previous)
flash the magisk enabled securetyoff permissive kernel with the command "fastboot flash boot_a pathtoimghere"
Reboot your G7 to LG Stock os and install magisk manager and TerminalEmulator from PlayStore
Now copy the Downloaded Vendor file to your internal sdcard and rename it to vendor.img
Open TerminalEmulator (adb shell works aswell) and type su, hit enter, then type "dd if=/sdcard/vendor.img of=/dev/block/bootdevice/by-name/vendor_a" , hit enter m this will take some time pls be patient
Once youre done with flashing the new vendor reboot to fastboot again and flash the GSI with the following command "fastboot flash system_a pathtoimghere"
One last step before you can enjoy AOSP type "fastboot -w" and then "fastboot reboot"
Whats Working ?
So for me everyting works so far i just noticed 2 small bugs till now
1. the Notification LED wont stop blinking (im on that already)
2.sometimes the display turns black for about 0,5secs
3. if your headphone jack doesn't work open up a root shell and enter "setprop persist.sys.overlay.devinputjack true"
Credits
Me for testing and patching the **** out of that boot.img and vendor.img
AutoPrime for his G7 system Dump
Phhuson for his brilliant work on GSI's
Zefie for recommending me the right tool to repack kernel without bootloops (xD)
SGMarkus for providing ideas and additional Help
reserved
reserved 2
Update , Ressurection Remix Gsi and LineageOS Gsi work too , also i was able to fix the blinking led , but it doesnt work at all anymore (lights hal doesnt load will investiagte tomorrow) but RR or Los doesnt have gapps packed with them so you will need to wait for twrp to be ready (i think i will finish it in next few days)
J0SH1X said:
HI Guys , its me again so after a long working night of disabling encryptions and verifications i finaly was able to boot a AOSP Generic System Image on my LG G7 (EUROPEAN VARIANT ONLY) and now im here to show you how to install
How to install ?
Download the GSI from PHH AOSP thread , take a/b ones with ot without gapps as you like
Download my SecuretyOff-Vendor-image and my Permissive boot.img
Reboot to fastboot and unlock your bootloader if you havent done it yet (you can find tutorials online, same method as on g6 and previous)
flash the magisk enabled securetyoff permissive kernel with the command "fastboot flash boot_a pathtoimghere"
Reboot your G7 to LG Stock os and install magisk manager and TerminalEmulator from PlayStore
Now copy the Downloaded Vendor file to your internal sdcard and rename it to vendor.img
Open TerminalEmulator (adb shell works aswell) and type su, hit enter, then type "dd if=/sdcard/vendor.img of=/dev/block/bootdevice/by-name/vendor_a" , hit enter m this will take some time pls be patient
Once youre done with flashing the new vendor reboot to fastboot again and flash the GSI with the following command "fastboot flash system_a pathtoimghere"
One last step before you can enjoy AOSP type "fastboot -w" and then "fastboot reboot"
Whats Working ?
So for me everyting works so far i just noticed 2 small bugs till now
1. the Notification LED wont stop blinking (im on that already)
2.sometimes the display turns black for about 0,5secs
Credits
Me for testing and patching the **** out of that boot.img and vendor.img
AutoPrime for his G7 system Dump
Phhuson for his brilliant work on GSI's
Zefie for recommending me the right tool to repack kernel without bootloops (xD)
SGMarkus for providing ideas and additional Help
Click to expand...
Click to collapse
Amazing work friend
What about the rom with the DAC? I can change this in the settings of the sound more precise. So not like the lg rom, the preset sound profiles?
Look forward to this! Many thanks +++
what about the dac? sound does not work over jack connection.
Hi.
Does the wide camera work with this rom?
And does the radio fm work?
Where can I find the last release?
Thanks.
Sent from my LM-G710 using Tapatalk
ricxgp said:
Hi.
Does the wide camera work with this rom?
And does the radio fm work?
Where can I find the last release?
Thanks.
Sent from my LM-G710 using Tapatalk
Click to expand...
Click to collapse
wide angle works on aosp rom , fm radio idk but try , you can find the latest release in treble enabled device section of xda
Any word on AOSP 9? As far as I know it requires vndk 8.1 but the g7 launched with Android 8. Do we have to wait for Android 8.1/9 from LG for AOSP 9?
https://highonandroid.com/android-r...oject-treble-unlocked-bootloader-twrp-method/
I saw a video on youtube by max lee i do believe he said you could install this as long as you had twrp recover
I have the sprint verison so i cant try but if anyone with twrp can try and comment
LameMonster82 said:
Any word on AOSP 9? As far as I know it requires vndk 8.1 but the g7 launched with Android 8. Do we have to wait for Android 8.1/9 from LG for AOSP 9?
Click to expand...
Click to collapse
does not work will maybe never work
Guys, can anyone pls do this in adb (or if you have root with terminal app):
echo 0 > /proc/sys/kernel/kptr_restrict
cat /proc/kallsyms >/sdcard/kallsyms.txt
UltraM8 said:
Guys, can anyone pls do this in adb (or if you have root with terminal app):
echo 0 > /proc/sys/kernel/kptr_restrict
cat /proc/kallsyms >/sdcard/kallsyms.txt
Click to expand...
Click to collapse
With the stock ROM or with aosp?
LameMonster82 said:
With the stock ROM or with aosp?
Click to expand...
Click to collapse
Doesn't really matter
so the headphone jack is now fixed open up a root shell and type setprop persist.sys.overlay.devinputjack true then reboot and it will work
UltraM8 said:
Guys, can anyone pls do this in adb (or if you have root with terminal app):
echo 0 > /proc/sys/kernel/kptr_restrict
cat /proc/kallsyms >/sdcard/kallsyms.txt
Click to expand...
Click to collapse
Hello, sorry for being so late but i finaly got the files that youre looking for. "Kptr_restrict" is attached in the post but "kallsyms" is too big so i uploaded it to my google drive. The link is:
https://drive.google.com/file/d/1Mn9jeS7n681dbRWvZqlundCuTAvNF4FJ/view?usp=drivesdk
LameMonster82 said:
Hello, sorry for being so late but i finaly got the files that youre looking for. "Kptr_restrict" is attached in the post but "kallsyms" is too big so i uploaded it to my google drive. The link is:
https://drive.google.com/file/d/1Mn9jeS7n681dbRWvZqlundCuTAvNF4FJ/view?usp=drivesdk
Click to expand...
Click to collapse
thx man!
LameMonster82 said:
Hello, sorry for being so late but i finaly got the files that youre looking for. "Kptr_restrict" is attached in the post but "kallsyms" is too big so i uploaded it to my google drive. The link is:
https://drive.google.com/file/d/1Mn9jeS7n681dbRWvZqlundCuTAvNF4FJ/view?usp=drivesdk
Click to expand...
Click to collapse
I've checked kallsyms, how did you get it? via terminal app, or adb (or even twrp maybe if it's possible on g7)? The prob is that functions addresses are zeros, that's not good.
TWRP 331 Porting Thread for New UMIDIGI Power 4G
New thread for the new model UMIDIGI Power 4G Helio P35 Octa core Mtk 6765
Umidigi Power 4G MT6765 Octa Core 4G 4GB 64GB Android 9 Smartphone 6,3 inches
Everybody are Welcome!:good:
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
New twrp 331-test 1 for this device is builded!
Now need period of tests...
http://www.mediafire.com/file/cnqw8d2qkjqtp6k/Twrp_331_test1_Umi_Power.rar/file
reserved 1
Reserved 2
TWRP Not Working for Me
Finally received the phone today. Spent a few hours trying to get your TWRP port installed with no luck unfortunately. After flashing it via SP Flash Tool, I ran into an "Orange State" unlock warning (which I assume is normal). However it's followed by a bootloop. I can only get the phone to boot using the stock recovery.img. Any modifications to the recovery causes a loop.
On the other hand though, I was able to get root through Magisk (I'm using the latest 19.3 version), and patching the stock boot.img through the app, then flashing the patched boot.img to the phone with SP Flash Tool. I have Viper4Android working, which was my main reason for wanting root, so I'm satisfied for the most part. Can't wait to try this phone out as my daily driver!
SeekerofLight.iz said:
Finally received the phone today. Spent a few hours trying to get your TWRP port installed with no luck unfortunately. After flashing it via SP Flash Tool, I ran into an "Orange State" unlock warning (which I assume is normal). However it's followed by a bootloop. I can only get the phone to boot using the stock recovery.img. Any modifications to the recovery causes a loop.
On the other hand though, I was able to get root through Magisk (I'm using the latest 19.3 version), and patching the stock boot.img through the app, then flashing the patched boot.img to the phone with SP Flash Tool. I have Viper4Android working, which was my main reason for wanting root, so I'm satisfied for the most part. Can't wait to try this phone out as my daily driver!
Click to expand...
Click to collapse
I confirm the first part of this, same issue here... i'd like to flash a twrp for gsi purposes, but for now no luck
SeekerofLight.iz said:
On the other hand though, I was able to get root through Magisk (I'm using the latest 19.3 version), and patching the stock boot.img through the app, then flashing the patched boot.img to the phone with SP Flash Tool. I have Viper4Android working, which was my main reason for wanting root, so I'm satisfied for the most part. Can't wait to try this phone out as my daily driver!
Click to expand...
Click to collapse
Can you write how you got the root of the law? Instructions for inexperienced users.
Thank you in advance.
Root UMIDIGI Power with Magisk
mr A V said:
Can you write how you got the root of the law? Instructions for inexperienced users.
Thank you in advance.
Click to expand...
Click to collapse
Sure thing! Here's a Magisk root guide for anyone just getting started that I wrote up just now. (All mentioned files are provided in the zip.)
Step 0 - Download the Attached Zip File Below
Google Drive Mirror
Mediafire Mirror
MEGA Mirror
Step 1 - Drivers
Install the MediaTek drivers by running "DriverInstaller.exe". These are the drivers that worked for me. But if you have issues with them in Step 5, Google "Mediatek MT65xx USB VCOM Drivers" (or some variation of that) and try some others you can find.
-----------------------------------
Step 2 - Install ADB Interface
Install the Android SDK (ADB Interface). To do this drop the platform-tools folder (from the Step 2 folder) into your C:\ directory. Press the windows start button and search for "Environment Variables" and click on "Edit environment variables" from the results. Under SYSTEM VARIABLES on the bottom (not User variables above it) click on the "Path" variable, and click edit. In the new window that appears, hit "Browse..." and click on the "platform-tools" folder that you placed in your C:\ directory.
All this does is allows you to easily input adb commands into command prompt with no issues. This will be used to verify that the device is appearing properly and issue commands in case of emergency.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-----------------------------------
Step 3 - Install Magisk
Copy the Magisk.apk to your phone and install it.
(This is where you can then copy the boot.img to your device and patch it via the Magisk app to create the "magisk_patched_boot.img" file, however I have included the already patched file in Step 6 for the UMIDIGI Power so you don't need to.)
Also, this is the Magisk v19.3 Beta, but you can install another version.
-----------------------------------
Step 4 - OEM Unlocking/USB Debugging Mode
On your phone, go to Settings >> System >> Developer Options. (If you haven't activated Developer Options yet, do that by going to About Phone >> Build number, and tap it a bunch of times, but I'm sure you already know this lol)
In Developer Options, turn on "OEM Unlocking" to unlock the bootloader, and USB Debugging.
-----------------------------------
Step 5 - Verify That Your Phone is Detected with ADB
Connect your phone to your PC. Make sure you click "Allow USB debugging" on your phone. Then open up Command Prompt. (Protip: Type "color a" and press Enter if you want to feel like a REAL HACKERMAN.) Now, type in "adb devices" and verify that your phone is detected by your computer. If it's detected, then that's perfect you can move on to Step 6. If not, then uh... you may have to try and find some other MediaTek drivers mentioned in Step 1.
-----------------------------------
Step 6 - Set up SP Flash Tool
Open up SP Flash Tool on your computer by running "flash_tool.exe" in the SP Flash Tool Folder. (If at any time it shows a "Processing" window for some reason, just close and reopen the program if it doesn't go away on its own.)
On the first line choose "MTK_AllInOne_DA.bin". And the third line "Authentication File" can be left blank.
On the second line where it shows "Scatter-loading File", hit "choose" and find the "MT6765_Android_scatter.txt" file in the Step 6 folder. It'll load up and show a bunch of green/white rows in the space below.
Now this looked intimidating to me at first, but it's actually quite simple. As far as I understand (and I could be wrong but), the scatter file just tells the program where to place certain files, like a map for the program to follow. The scatter file I provided is for the UMIDIGI Power. The only thing we'll worry about for now is the boot.img file (but in the future, this is where you could also install a TWRP recovery once we get one that is confirmed to work.)
So in the white/green list, scroll down to where it says "boot" in the "Name" column, and click on the blank area in the "Location" column. It will bring up a window where you can browse to the "magisk_patched_boot.img" that I provided.
-----------------------------------
Step 7 - The Big Huzzah (Rooting)
Power off your phone and make sure it's UNPLUGGED. On SP Flash Tool, click "Download". This prepares the program to begin flashing your phone as soon as it is connected. Grab your phone with one hand, and with your other hand plug in the USB cable (if you only have one hand, use your mouth I guess). Your screen should not turn on at all throughout this process, but if it's successful, you should see that the program begins to flash your device after a second or two. Now just wait until it reaches 100% and says "Download Ok" with a green checkmark. And you're pretty much done!
You can then boot up your phone and check the Magisk app, as well as download a root checker from the Play Store to confirm that your phone has root access! Have fun!
Thank you, far-away friend from me, that you are such a sympathetic person! Thank you for writing everything so quickly and in detail. As soon as I receive my phone, I will definitely try to do everything as you wrote.
Tell me, do you plan to install any firmware on this device? For example, Miui. Or are you satisfied with the stock?
mr A V said:
Thank you, far-away friend from me, that you are such a sympathetic person! Thank you for writing everything so quickly and in detail. As soon as I receive my phone, I will definitely try to do everything as you wrote.
Tell me, do you plan to install any firmware on this device? For example, Miui. Or are you satisfied with the stock?
Click to expand...
Click to collapse
No problem! Unfortunately I don't see many custom ROMs coming to this phone, considering it's not a very popular device. I'd guess our best bet is to hope that the UMIDIGI F1 gets some support, and that anything on there can hopefully be ported over to this phone, but even that device isn't very popular either. For me though, that's not a huge issue because I'm actually quite satisfied with the stock firmware it has on board. It's basically stock Android Pie, and I've been able to add all the extra goodies I want into the phone through Magisk Manager and EdXposed with very minor issues. Most notably Viper4Android to fix the slightly tinny speakers and pump up the overall headphone experience too, and Gravity Box for some extra minor software customization.
Overall, I'd say the biggest downside to this device is the limited camera capabilities, and its somewhat limited performance for heavier tasks like 3D games / game streaming. But other than that, this feels like a very premium device. :good:
I thought about the fact that it is you who can transfer other firmware to this device. As a developer, let's say.
On the F1 already installing the firmware AOSP, LOS and other projects. But need to flash these firmware through TVRP recovery. For our device, there is no such recovery yet.
I have little understanding of the intricacies of the android. Sorry if my questions seem silly.
If we take the firmware for F1, for example AOSP, will it have to be somehow changed for our UD Power? Or can just take the archive, as it is, and flash it?
The processor of our smartphone is not very strong, so it is not for games. It is also not clear what RAM is installed. It looks like the manufacturer has installed a cheap part. Put single-channel LDDR 3. So he made a low price. At the expense of device performance.
mr A V said:
I thought about the fact that it is you who can transfer other firmware to this device. As a developer, let's say.
On the F1 already installing the firmware AOSP, LOS and other projects. But need to flash these firmware through TVRP recovery. For our device, there is no such recovery yet.
I have little understanding of the intricacies of the android. Sorry if my questions seem silly.
If we take the firmware for F1, for example AOSP, will it have to be somehow changed for our UD Power? Or can just take the archive, as it is, and flash it?
The processor of our smartphone is not very strong, so it is not for games. It is also not clear what RAM is installed. It looks like the manufacturer has installed a cheap part. Put single-channel LDDR 3. So he made a low price. At the expense of device performance.
Click to expand...
Click to collapse
I definitely consider myself to be a major noob with the more advanced Android development stuff. I only know enough to find my way around the internet and flash compatible software, haha. I've never looked into creating ports myself, but it's certainly something I think might be worth learning, especially with the limited device support on these phones.
And yeah, in terms of performance I don't expect much out of a phone at this price point, but for all the essentials - music, 1080p YouTube, web browsing, and mid to light gaming, it's surprisingly great considering the price. I haven't had any issues with the memory as of yet, so I wouldn't be too concerned, although you're definitely right in that they probably source some pretty cheap parts for these kind of phones.
SeekerofLight.iz said:
Sure thing! Here's a Magisk root guide for anyone just getting started that I wrote up just now. (All mentioned files are provided in the zip.)
"stubbed guide"
Click to expand...
Click to collapse
It works like a charm, thank you! by the way, were you able to boot that twrp or still nothing? and if you made it, were you able to flash a gsi over that too? i'm unable even to boot that twrp
---------- Post added at 09:30 AM ---------- Previous post was at 09:29 AM ----------
ghost45 said:
TWRP 331 Porting Thread for New UMIDIGI Power 4G
New thread for the new model UMIDIGI Power 4G Helio P35 Octa core Mtk 6765
Umidigi Power 4G MT6765 Octa Core 4G 4GB 64GB Android 9 Smartphone 6,3 inches
Everybody are Welcome!:good:
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Click to expand...
Click to collapse
Can i ask you a guide on how were you able to boot it? i'm only getting a bootloop after flashing that from SPFlash
I will build one other version of recovery soon...
mg95tux said:
It works like a charm, thank you! by the way, were you able to boot that twrp or still nothing? and if you made it, were you able to flash a gsi over that too? i'm unable even to boot that twrp
Click to expand...
Click to collapse
Glad to hear it worked for you!
Still nothing. Unfortunately I haven't had any luck with booting into TWRP since I last tried it. Hoping ghost45 will be able to help us out with that when he gets the chance.
Bootloop - Secureboot
Nevermind, bootloader locked.
just type on CMD:
adb reboot bootloader
then
fastboot flashing unlock
Andre_Filho said:
Nevermind, bootloader locked.
just type on CMD:
adb reboot bootloader
then
fastboot flashing unlock
Click to expand...
Click to collapse
remember to allow oem unlock from developer settings in stock rom, otherwise it will fail!
SeekerofLight.iz said:
Finally received the phone today. Spent a few hours trying to get your TWRP port installed with no luck unfortunately. After flashing it via SP Flash Tool, I ran into an "Orange State" unlock warning (which I assume is normal). However it's followed by a bootloop. I can only get the phone to boot using the stock recovery.img. Any modifications to the recovery causes a loop.
On the other hand though, I was able to get root through Magisk (I'm using the latest 19.3 version), and patching the stock boot.img through the app, then flashing the patched boot.img to the phone with SP Flash Tool. I have Viper4Android working, which was my main reason for wanting root, so I'm satisfied for the most part. Can't wait to try this phone out as my daily driver!
Click to expand...
Click to collapse
How do you manage to work Viper.
Cause i'm having some problems, tested all versions and my Driver always stays on "Active: NO Format: Unsuported.... Abnormal"
BusyBox also don't seens to work.
:/
Some help?
Andre_Filho said:
How do you manage to work Viper.
Cause i'm having some problems, tested all versions and my Driver always stays on "Active: NO Format: Unsuported.... Abnormal"
BusyBox also don't seens to work.
:/
Some help?
Click to expand...
Click to collapse
The trick to getting Viper4Android to work is to make sure you have SELinux set to "PERMISSIVE" rather than "ENFORCING" on your phone. Here's a handy little app designed to automatically set it to permissive on boot!
https://forum.xda-developers.com/devdb/project/?id=1561#downloads
And for BusyBox, I was having issues too at first because I think with systemless root, BusyBox can only be installed in /sbin, which gets wiped after each boot. So I searched for "BusyBox" in the Magisk app and found a module called "BusyBox for Android NDK" which has worked perfectly for me.
One thing to note...
Sometimes SELinux doesn't always get changed automatically everytime you boot up. It's pretty consistent, but every once in awhile you may need to manually set it to permissive mode again if things don't seem to be working. But it's literally just pressing a single button, so not a big deal.
The other thing is with Viper itself- At times when I launch the app, the driver status says "abnormal" even after I've toggled SELinux to permissive. If you go into settings and toggle "compatibility mode" or "attach audio effects" on and then off that seems to refresh the driver status. Not sure why, but it works.
Let me know if you have any issues.
TWRP for UMIDIGI POWER
I ask for help in creating TWRP for UMIDIGI POWER firmaware ROM v1.5
Please make for this model TWRP
I am very grateful to you - I unlocked the phone and got the rights Root rights.
It remains only to create a TWRP for UMIDIGI POWER
At this forum, competent specialists and for other models everything is already done.
Maybe there is a website where you can make an order to create a TWRP?
Unfortunately, I do not know English and I do not know how to apply.
I would be very grateful and ready to test your work.
Hi,
So long i've dont active my account on XDA Developers because my studies. Finally i've found to update Oukitel K9 by using Treble Img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video Review : https://youtu.be/EMbBpCc0R-Y
Please make sure you have download Generic GSI from Google and already unlocked bootloader.
Here the link ( Download Generic GSI )
Choose ARM64+GMS / ARM64, if you want to flash android Q treble rom, just download Android Q only.
Let's start it.
1. Flash to stock firmware using MTK Tools
2. Extract vbmeta.img from Generic GSI.
3. Connect to usb to device (enter fastboot mode) hold volume up and power button, choose fastboot mode.
4. Type this and make sure using generic vbmeta.img
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
5. Next erase file system
Code:
fastboot erase system
6. a) Flash file system
Code:
fastboot flash system ######.img
# = your file system name
or
6. b) Using TWRP > Flash> Click image> find img to flash> Select system>then swipe to flash
7.
Code:
fastboot -w
8.
Code:
fastboot reboot
PLEASE TAKE NOTE OUKITEL K9 IS A/B DEVICES
Test
Working GSI:
system-quack-arm64-ab-gapps.img.xz
Evolution X , Lineage 17.1 - All Working
Havoc 3.3 - RIL bugs, no simcard detect
All GSI Rom list you can find here : Phhusson GSI
Thanks @Levered
I've flashed stock Android 9 using SP Flash Tool, is that what you're talking about when you say 'MTK Tools'?
Step #3 - My PC doesn't recognize my device. (see #2 below)
A few other questions:
1) What build number are you coming from? I'm on OUKITEL_K9_V21_20190524
From what I've read there was some sort of 'lock' put in place at around that time so that only certain firmware could be flashed.
2) Fastboot? on a MTK device? I thought that was impossible too, even though it canbe put in to Fastboot mode by holding Vol+&PWR. I'm new to MTK devices so am very much a newb.
3) The link you provided correct? It takes me to the page for Android 11 GSI's, but the video shows Android 10
4) At bottom you have generic GSI linked—which one to flash, the one linked at top or bottom?
Also, perhaps worth mentioning, I've successfully temporary-rooted using this method from @diplomatic
https://forum.xda-developers.com/an...ing-temp-root-mediatek-armv8-t3922213/page101
Thanks again
TiTiB said:
Thanks @Levered
I've flashed stock Android 9 using SP Flash Tool, is that what you're talking about when you say 'MTK Tools'?
Step #3 - My PC doesn't recognize my device. (see #2 below)
A few other questions:
1) What build number are you coming from? I'm on OUKITEL_K9_V21_20190524
From what I've read there was some sort of 'lock' put in place at around that time so that only certain firmware could be flashed.
2) Fastboot? on a MTK device? I thought that was impossible too, even though it canbe put in to Fastboot mode by holding Vol+&PWR. I'm new to MTK devices so am very much a newb.
3) The link you provided correct? It takes me to the page for Android 11 GSI's, but the video shows Android 10
4) At bottom you have generic GSI linked—which one to flash, the one linked at top or bottom?
Also, perhaps worth mentioning, I've successfully temporary-rooted using this method from @diplomatic
https://forum.xda-developers.com/an...ing-temp-root-mediatek-armv8-t3922213/page101
Thanks again
Click to expand...
Click to collapse
Sorry for this.
Use fastboot mode on windows. You can find this on others thread using cmd.
I suggest you flash img using twrp for more faster.
3) Yes, i will check later.
4) All linked has work on our devices. I will update what rom has worked.
thanks
Levered said:
Sorry for this.
Use fastboot mode on windows. You can find this on others thread using cmd.
I suggest you flash img using twrp for more faster.
3) Yes, i will check later.
4) All linked has work on our devices. I will update what rom has worked.
thanks
Click to expand...
Click to collapse
Thanks for the reply, but the question remains,
Which firmware version did you start with?
I believe the bootloader is locked on my device, no fastboot.
TiTiB said:
Thanks for the reply, but the question remains,
Which firmware version did you start with?
I believe the bootloader is locked on my device, no fastboot.
Click to expand...
Click to collapse
Pixel experience, havoc 3.3, lineage 17.1 and EvolutionX
Please unlocked your bootloader, if that. Your device will get brick.
Levered said:
Pixel experience, havoc 3.3, lineage 17.1 and EvolutionX
Please unlocked your bootloader, if that. Your device will get brick.
Click to expand...
Click to collapse
nvm, you are obviously not going to share useful information
1) build# you were able to root
2) what you mean by 'MTK Tools'
3) and other important stuff
Additional information I have discovered
The vbmeta generic file is needed http://www.mediafire.com/file/lpdpocvn76n7cyo/vbmeta.img/file
The rom is https://www.mediafire.com/file/i9jo...20200413-UNOFFICIAL-treble_arm64_bvN.img/file
The Trebel test app stated the my Oukitel k9 was A only I found out it is A/B this rom works.
Also after flashing Lineage 17 there is not enough space for Gapps. Solution after flash reboot recovery again go to wipe select system select repair then adjust size of partition. Then reboot to recovery again then flash Gapps. I have successfully flashed Gapps stock and works great. Note I flashed Magisk last. So far this GSI works great, better than the phones original. Xposed works! Gravity box beta 6 works. Apps now auto start properly.
Thank you.
Thanks
hello, my name is bausette i'm italian, i'm sorry for my bad English i hope you cand understand me. First of all
thanks for your work, that's amazing my Oukitel k9 has new life :fingers-crossed::victory:, that's amazing Everything work better, than Stock Rom.
Can i Ask you some question please? i had Flash Vmeda generic files, Open Gapp, Orange State fix message, Lineage Rom project Treble, TWRP recovery, but i think i forgot something, because after install Magisk it say that the device is not Rooted, please can you tell my step by step Guide to Root the phone? thanks so much
Levered said:
PLEASE TAKE NOTE OUKITEL K9 IS A/B DEVICES
Click to expand...
Click to collapse
My Oukitel K9 is A-Only partition when I use Treble checker. Every guide seems to reference A/B for the Oukitel K9. Mine is not or at least it is being reported incorrectly.
How do I update to a custom rom when I have only A-Partition? The stock image is so buggy it's almost unusable.
Thanks!
Lannie
lschafroth2 said:
My Oukitel K9 is A-Only partition when I use Treble checker. Every guide seems to reference A/B for the Oukitel K9. Mine is not or at least it is being reported incorrectly.
How do I update to a custom rom when I have only A-Partition? The stock image is so buggy it's almost unusable.
Thanks!
Lannie
Click to expand...
Click to collapse
You can try A partition images.
Levered said:
You can try A partition images.
Click to expand...
Click to collapse
Is the process any different? I found the following list of files:
https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.x/
It shows Treble A only image as an option. Mine supports Treble but not seamless updates due to the A-only partition.
Will the image listed above work with the normal guides? Do I need the vbmeta.img for the Oukitel K9?
I'm very new to this so I'm afraid to mess it up.
Lannie
lschafroth2 said:
Is the process any different? I found the following list of files:
https://sourceforge.net/projects/andyyan-gsi/files/lineage-17.x/
It shows Treble A only image as an option. Mine supports Treble but not seamless updates due to the A-only partition.
Will the image listed above work with the normal guides? Do I need the vbmeta.img for the Oukitel K9?
I'm very new to this so I'm afraid to mess it up.
Lannie
Click to expand...
Click to collapse
you can try both, but i think our k9 is A/B partition.
yes you need vbmeta.img
follow this guide:
https://forum.xda-developers.com/mi-9-se/how-to/guide-how-to-flash-twrp-gsi-roms-mi-9-se-t3939254
Levered said:
you can try both, but i think our k9 is A/B partition.
yes you need vbmeta.img
follow this guide:
https://forum.xda-developers.com/mi-9-se/how-to/guide-how-to-flash-twrp-gsi-roms-mi-9-se-t3939254
Click to expand...
Click to collapse
I have tried 4 different Treble checking apps and they all say Treble supported but seamless updates not supported because A-only partition exists.
This is a Oukitel K9 OUKITEL_K9_V21_20190524
Wonder why everyone else seems to have A/B and I only have A.
Lannie
---------- Post added at 07:35 PM ---------- Previous post was at 07:33 PM ----------
nation888888 said:
The vbmeta generic file is needed http://www.mediafire.com/file/lpdpocvn76n7cyo/vbmeta.img/file
The rom is https://www.mediafire.com/file/i9jo...20200413-UNOFFICIAL-treble_arm64_bvN.img/file
The Trebel test app stated the my Oukitel k9 was A only I found out it is A/B this rom works.
Also after flashing Lineage 17 there is not enough space for Gapps. Solution after flash reboot recovery again go to wipe select system select repair then adjust size of partition. Then reboot to recovery again then flash Gapps. I have successfully flashed Gapps stock and works great. Note I flashed Magisk last. So far this GSI works great, better than the phones original. Xposed works! Gravity box beta 6 works. Apps now auto start properly.
Thank you.
Click to expand...
Click to collapse
How do you verify you are A/B? Mine says A only on 4 different treble apps. Is there a way to verify for sure? I have a Oukitel K9.
Lannie
lschafroth2 said:
I have tried 4 different Treble checking apps and they all say Treble supported but seamless updates not supported because A-only partition exists.
This is a Oukitel K9 OUKITEL_K9_V21_20190524
Wonder why everyone else seems to have A/B and I only have A.
Lannie
Click to expand...
Click to collapse
You can try it first both partition. If not boot, try another partition. :fingers-crossed:
Everything seems to work except hotspot
The no verity, Lineage rom a/b, vbmeta, resizing system partition size, installing stock gapps all works making this one of the nicest roms I have worked with. The only issue I find so far I cannot get the mobile Hotspot to stay on. Mobile Hotspot works in safe mode. I did a fresh install and does the same. Modded buildprop, no results. Installed module tether enabler, no results.
Mobile Hotspot switches off right away. Any ideas?
---------- Post added at 06:01 AM ---------- Previous post was at 05:57 AM ----------
It is this one a/b I have not seen any other variants. Both Global and Chinese have same partition setup. Yes I have tried a only and doesn't boot.
How do I check? I've tried the ADB SHELL commands and it returns an empty line. The article said it would show TRUE if it did. All it returns is an empty line. I have yet to find any app that shows my Oukitel K9 is A/B. All of them say it is not.
lschafroth2 said:
How do I check? I've tried the ADB SHELL commands and it returns an empty line. The article said it would show TRUE if it did. All it returns is an empty line. I have yet to find any app that shows my Oukitel K9 is A/B. All of them say it is not.
Click to expand...
Click to collapse
If recovering to stock is easy, I guess I can dive in and try the A/B image and see if it works.
Lannie
use the lineage ab... it is ab. Make sure to do the no verity first with vbmeta line. Then flash lineage ab the file is not clear it states b. I tried them all see my post for direct download.
Same result
lschafroth2 said:
How do I check? I've tried the ADB SHELL commands and it returns an empty line. The article said it would show TRUE if it did. All it returns is an empty line. I have yet to find any app that shows my Oukitel K9 is A/B. All of them say it is not.
Click to expand...
Click to collapse
I have same firmware, K9 OUKITEL_K9_V21_20190524, and same results for Treble check (see screenshots for info).
Also, device not recognized using fastboot.
Code:
adb devices
OUKITELK90007961
Code:
adb reboot bootloader
success; 'FASTBOOT mode. . .' on phone
Code:
fastboot devices
blank line
From what I understand, this is because our devices' bootloaders are locked; and there is nothing we can do to change that, period. So, no flashing anything but stock. I hope I'm wrong, and someone more knowledgeable corrects me, but I'm pretty sure this is correct.
For now I'm just stuck, and using temporary root as mentioned in previous post.
Blu G90 device shipped from factory with Android 10
as with other devices from blu they do not have a public download of there roms. So here is the stock rom pulled from the device with SP-Flash tool.
Both the shipped rom build fingerprint
Code:
ro.bootimage.build.fingerprint=BLU/G90/G0310WW:10/QP1A.190711.020/1585383273:user/release-keys
And the ota update from June fingerprint
Code:
ro.system.build.fingerprint=BLU/G90/G0310WW:10/QP1A.190711.020/1592848714:user/release-keys
are in android file host flash-able with spflash tool, if needed.
I know the first thing to have before modifying android is the method to recover from bad edits. So here they are.
Other works will be stored in this same folder.
https://www.androidfilehost.com/?w=files&flid=315927
First stock rom is Dumped to github, If you need or want specific files, without needing to download whole rom.
https://github.com/mrmazakblu/blu_g0310ww_dump
Stock kernel source:
https://github.com/mrmazakblu/Blu_G90_G0310WW_stock_kernal
Device INFO
*******Above links are pulled firmware. Below is an official firmware file, w/ verified images.********
https://www.mediafire.com/folder/ocmvgrcd73bqy/G90
**
.
Bootloader unlock is same as past devices.
1. enable develper options
2. enable OEM unlock , from inside developer options
3. Reboot to bootloader (adb reboot bootloader, or button combo)
4. fastboot flashing unlock
5. Select confirm on device
6. fastboot reboot (causes factory reset)
Flashing GSI
few more steps than Pie devices, but not too complicated.
You will need recent fastboot tools as tested these steps were done with V30.0.4
https://developer.android.com/studio/releases/platform-tools
Verified boot is enabled on device. The verity key is stored into 3 section.
vbmeta.img
vbmeta_system.img
vbmeta_vendor.img
All found in stock rom. Shared in first post.
1. Unlock bootloader. (see last post)
2. Reboot to bootloader to disable verity
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot --disable-verity --disable-verification flash vbmeta_vendor vbmeta_vendor.img
3. Reboot from bootloader to fastboot(new interface for android 10)
Code:
fastboot reboot fastboot
4. flash sysem from "fastbootd"
Code:
fastboot flash system **gsi-system.img**
Use 64 bit AB GSI
5. Wipe data so the new system will work
Code:
fastboot -w
ROOT::
Not yet confirmed yet. Magisk patched_boot has not provided root as of yet.
Currently looking into pre-rooting the system.img, but not success yet.
TWRP;;
https://forum.xda-developers.com/android/development/twrp-twrp-3-4-0-0-blu-g90-g0310ww-t4163497
.
I have been able to edit the stock /system and flash it back to phone.
--I have added adaway host file
--Removed the SIMO app
-- Removed the IGNITE adware app (dti.blu)
--Removed The Verizon Remote SIM lock app
--Removed Blu-Privacy app
--Removed Opera browser app
--Deodexed Rom (rom would not boot past splash screen without this)
Uploaded edited sysem.img to device folder listed in OP.
Flash with same instructions as How to flash GSI
--Attempting to add SU binary makes rom fail to boot. So still no stock rooted.
Maybe soon.
/
Blu released kernel source today. 8-27. The tar.hz is dated April, eh, whatever.
I added the source files to the wip twrp tree, it compiles without error. (Not my normal experience , on first time out with Blu kernel).
But as mentioned before, the twrp will not pack the image correctly. Because of the need for new dtb commands that twrp 9.0 build environment does not accept.
And when building in the twrp 10.0-wip tree, the results have not booted for me yet. (I'm on build attempt 12, or so)
I'm rambling, sorry.
When I repack the twrp using the built kernel, twrp has only blank screen, and adb is active. So kernel is slightly off.
Build did not output separate dtb or dtbo.
Well I confirmed it, the screen on this phone is not the one the kernel is building for.
I compared the defconfig from source, the one that matches the name in build prop, to the one I pulled from /proc. And they are different, and the kernel errors out during build when using right defconfig. So, waiting again for Blu to provide the files.
There does not appear to be any interest in this phone, other than my own.
Well maybe it will catch on
It's been advertised on many mm ore locations than the average BLU phone.
Amazon
Ebay
Walmart
Newegg
Best buy
B&H photo
Time will tell.
mrmazak said:
Well I confirmed it, the screen on this phone is not the one the kernel is building for.
I compared the defconfig from source, the one that matches the name in build prop, to the one I pulled from /proc. And they are different, and the kernel errors out during build when using right defconfig. So, waiting again for Blu to provide the files.
Click to expand...
Click to collapse
Any luck with Blu providing the correct kernel files?
Ivisibl3 said:
Any luck with Blu providing the correct kernel files?
Click to expand...
Click to collapse
Not yet. They acknowledged my email, but as yet have not updated there posted source.
Root is half way achieved.
Factory rom was found. It included a boot-debug.img
When this image is used in boot partition, adb root is allowed.
It is only limited root. Example: blockdev command , used to allow remount / to rw, is not permitted. Bit is start.
Factory flashtool rom shared on Blu developers mediafire page.
Will add link to debug-boot.img soon
added to device folder listed in OP
google information on debug-boot.img
https://source.android.com/compatibility/vts/vts-on-gsi
if you have the stock boot.img, and magisk manager, why cant you patch the boot.img and then disable dm-verity by flashing vbmeta.img/vbmeta_system.img/vbmeta_vendor.img and then flash the boot.img via sp flash tool to give you root access?
aryanhington said:
if you have the stock boot.img, and magisk manager, why cant you patch the boot.img and then disable dm-verity by flashing vbmeta.img/vbmeta_system.img/vbmeta_vendor.img and then flash the boot.img via sp flash tool to give you root access?
Click to expand...
Click to collapse
because magisk init is not starting on a patched image. have no sign on magisk in the any of the logs.
the issue is posted on magisk github issue tracker. no solution as of yet.
mrmazak said:
because magisk init is not starting on a patched image. have no sign on magisk in the any of the logs.
the issue is posted on magisk github issue tracker. no solution as of yet.
Click to expand...
Click to collapse
why this that occurring, because for umidigi devices on android 10 work fine https://community.umidigi.com/forum.php?mod=viewthread&tid=19114 and they also use a mediatek chipset?
aryanhington said:
why this that occurring, because for umidigi devices on android 10 work fine https://community.umidigi.com/forum.php?mod=viewthread&tid=19114 and they also use a mediatek chipset?
Click to expand...
Click to collapse
different brand, so built differant. just like ther are redmi (xiamoi) devices with mtk, but fastboot unlock doe not work, it needs redmi app to unlock. and flash tool not work on all devices with MTK, like amazon fire device , they have mtk and do not work with fastboot unlock, or spflash.
mrmazak said:
I have been able to edit the stock /system and flash it back to phone.
--I have added adaway host file
--Removed the SIMO app
-- Removed the IGNITE adware app (dti.blu)
--Removed The Verizon Remote SIM lock app
--Removed Blu-Privacy app
--Removed Opera browser app
--Deodexed Rom (rom would not boot past splash screen without this)
Uploaded edited sysem.img to device folder listed in OP.
Flash with same instructions as How to flash GSI
--Attempting to add SU binary makes rom fail to boot. So still no stock rooted.
Maybe soon.
/
Click to expand...
Click to collapse
which steps did you take to modify the stock /system?
aryanhington said:
which steps did you take to modify the stock /system?
Click to expand...
Click to collapse
used superr script to unpack stock super.img and continued to extract system.img
manually went through the extracted system/system/app folder and deleated the aps I did not want (adware// bloate)
used the rom tools option / deodex
then repacked the system.img
aryanhington said:
why this that occurring, because for umidigi devices on android 10 work fine https://community.umidigi.com/forum.php?mod=viewthread&tid=19114 and they also use a mediatek chipset?
Click to expand...
Click to collapse
This is not entirely true.
Many Umidigi phones have been upgraded from 9 to 10. So the partitions would be very similar and considerably easy to root.
But for new phones coming with 10 the story changes. Read the last pages of your link's article. In addition, I know why and effect on Umidigi Power 3 still has limitations on root.
So this BLU G90 is not very different and depends on a lot of experimentation and tests. I believe that the OP is doing a great job mainly taking everything to github and trying to compile the kernel and firmware.
DragonPitbull said:
This is not entirely true.
Many Umidigi phones have been upgraded from 9 to 10. So the partitions would be very similar and considerably easy to root.
But for new phones coming with 10 the story changes. Read the last pages of your link's article. In addition, I know why and effect on Umidigi Power 3 still has limitations on root.
So this BLU G90 is not very different and depends on a lot of experimentation and tests. I believe that the OP is doing a great job mainly taking everything to github and trying to compile the kernel and firmware.
Click to expand...
Click to collapse
can you elaborate what you mean by this?
Hi Fellows,
First of all, I’m newbie to flashing (or so-called) phones. I want to change my phone for de-googled one. I’m thinking about POCO X3 Pro with LineageOS 18.1.
I’ve been recently reading a lot about changing OS, but I feel completely overwhelmed by how complex knowledge it is. Even on the forum there is so much info, so much specific vocabulary/acronyms
Can you advise me, how to start?
Or maybe different way... do you know any reliable service/somebody in the UK, who could help? I've already checked services in my town - no one does software modifications
kamien8 said:
Hi Fellows,
First of all, I’m newbie to flashing (or so-called) phones. I want to change my phone for de-googled one. I’m thinking about POCO X3 Pro with LineageOS 18.1.
I’ve been recently reading a lot about changing OS, but I feel completely overwhelmed by how complex knowledge it is. Even on the forum there is so much info, so much specific vocabulary/acronyms
Can you advise me, how to start?
Or maybe different way... do you know any reliable service/somebody in the UK, who could help? I've already checked services in my town - no one does software modifications
Click to expand...
Click to collapse
You don´t need to pay someone else for that, you can do it by your own.
I will give you the topics in order, one by one, and just search for the info till understand what you are want to achieve.
1-Unlocking bootloader.
2-Flashing a custom recovery.
3-Rooting (optional)
4-installing a custom ROM (like LineageOS)
Search for these topics in your own forum, read carefully and apply them when you are sure what you are doing.
Copied these from my old post in other forums, I updated a little but still might be a little outdated
Spoiler: How to unlock bootloader
Link your poco x3 pro to your MI account
Activate "Find my device" for Mi account
Settings > About Phone > Tab "MIUI version (For POCO)" until developer mode unlocked
Settings > Additional Settings > Developer Options
OEM unlocking - Checked
Mi Unlock status > Add account and device - Do only once, anymore will reset 168 hours unlock counter
Go to https://en.miui.com/unlock/and download the mi unlock software
Latest version to date of this post is https://miuirom.xiaomi.com/rom/u1106245679/5.5.224.55/miflash_unlock-en-5.5.224.55.zip
Prepare for future unlock
Turn off your mobile
Boot into fastboot mode - Volume Down + Power
Run "MiUsbDriver.exe" located in the miflash_unlock_en zip
Connect mobile to PC or laptop
Poco X3 Pro driver should be installed
Run "miflash_unlock.exe" and proceed through the software
If you yet to apply for permission to unlock, you can apply from there (I think, the last I applied was years ago, not sure still a thing now or not)
The software will tell you the countdown which is 168 hours aka 1 week.
Exit fastboot mode on phone by holding the power button.
A week later, time to unlock.
Backup your file, if you have used the phone intensively, unlocking will result in factory reset.
Turn off mobile
Boot into fastboot mode - Volume Down + Power
Run "miflash_unlock.exe"
Connect mobile to PC
Proceed through "miflash_unlock.exe"
Unlocked
Spoiler: How to Flash Custom Recovery
Download google platform tool from https://developer.android.com/studio/releases/platform-tools
Extract the tool
In the tool folder, type "cmd" at "Address bar" to open command prompt to that folder
Press enter after you type "cmd", if it isn't obvious.
Turn off mobile
Boot into fastboot mode - Volume Down + Power
Connect mobile to PC
Go to command prompt window, type "fastboot devices".
Your phone will be shown if detected, otherwise, fix your driver.
Download Custom Recovery
OrangeFox - https://orangefox.download/device/vayu
TWRP - https://forum.xda-developers.com/t/recovery-unofficial-teamwin-recovery-project.4269551/
Lineage OS Recovery - https://download.lineageos.org/vayu
Don't use LOS recovery if you are rooting, it doesn't support OTA data decryption thus magisk need to be reflashed everytime during OTA.
Extract the "img" recovery file to the tool's folder
Type "fastboot flash recovery <filename>"
Done, type "fastboot reboot recovery" or Volume Up + Power on mobile to enter recovery
Spoiler: How to Flash Custom Rom
Connect mobile to PC
Copy files to mobile
Firmware - https://xiaomifirmwareupdater.com/firmware/vayu/
Rom
XDA Roms - https://forum.xda-developers.com/f/xiaomi-poco-x3-pro.12163/?prefix_id=33
Xiaomi EU Rom - https://xiaomi.eu/community/forums/miui-rom-releases.103/
Gapp (if you want)
MindtheGapps
NikGapps
FlameGapps
OpenGapps (Personally Recommended)
Magisk (If rooting) - https://github.com/topjohnwu/Magisk/releases
Boot into recovery - Vol up + Power
install in order
Firmware
Rom
Gapps (if you want)
Magisk (if rooting)
Format data in recovery
Wipe Cache and Dalvik/Art Cache (If the recovery support it)
Reboot into system
Done
If you mess up the format data sequence, don't worry, you can always use "adb sideload". Also, if you use LOS recovery, you need to use sideload.
Look for sideload in recovery
Open command prompt in your tool folder, type "adb sideload <filename>" to install the things you want.
Spoiler: How to flash back or to official rom along with official recovery
Download xiaomi flash tool - https://xiaomiflashtool.com/
Download fastboot package - https://xiaomifirmwareupdater.com/archive/miui/vayu/
Extract xiaomi flash tool, run "XiaoMiFlash.exe"
Extract fastboot package to somewhere, preferably root subfolder of c:\ or whatever drive
Long pathname can cause "XiaoMiFlash.exe" to run into error
Boot mobile into fastboot - Vol down + power
Connect mobile to pc
In "XiaoMiFlash.exe", select folder of fastboot package
Bottom right of the software, choose "clean all" or "clean and lock (bootloader)"
Click flash
Once done, it will auto reboot into MIUI
Spoiler: How to pass safetynet for custom rom
At the moment of this post, most custom roms fail safetynet. It is not absolutely necessary to get safetynet to work. Only do this if the gapps you want to install require it.
Install magisk (No way around it)
Install props config module
Reboot
Run any terminal app - https://play.google.com/store/apps/details?id=com.termux
Type "su" and enter
Grant super user rights to it
Type "props" and enter
Type "1" and enter
Type "f" and enter
Type "22" and enter
Type "6" and enter
Basically, you are choosing "Poco X3 Pro (Global)"
Type "y"
Reboot and test your safetynet
Spoiler: How to make Nasty Anti-Root Apps work with Magisk
In magisk, install Riru module
Download Unshare - https://github.com/vvb2060/riru-unshare/releases
In magisk, install Unshare
In magisk, enable "Magisk Hide" in settings
In magisk, "hide Magisk" in settings, choose some really unpredictable name
In magisk, press "Shield", hide all options (dropdown) for the targetted App
Reboot
Try run the apps multiple times
If fail
Install App Manager - https://f-droid.org/en/packages/io.github.muntashirakon.AppManager/
In App Manager, look for the apps, go to "Services", disable that one "(Isolated)" service.
Double make sure it is applied
Reboot
Try run the apps multiple times
Still fail
Try this, some say it worked
In magisk, install LsPosed module
Install XPrivacyLua - https://repo.xposed.info/module/eu.faircode.xlua
In LsPosed, enable XprivacyLua and Singpass in that same list
Reboot
In XPrivacyLua, look for the app, enable restrict on "Get Applications"
Reboot
Try run the apps multiple times
this is the last resort
Install Shelter - https://play.google.com/store/apps/details?id=net.typeblog.shelter
Clone the App in Shelter
In shelter, under work profile, make sure no rooted apps in there
Reboot
Try run the App in work profile multiple times
SubwayChamp said:
You don´t need to pay someone else for that, you can do it by your own [...]
Click to expand...
Click to collapse
Thanks a lot. It makes sense.
I was also told, that before flashing it is esential to do a backup.
What's your opinion? How to do so?
kamien8 said:
Thanks a lot. It makes sense.
I was also told, that before flashing it is esential to do a backup.
What's your opinion? How to do so?
Click to expand...
Click to collapse
About backup the first important is what is important for one, I mean personal information like messages, call, WhatsApp and so on.
But the most important in other sense is about the well functioning of the device itself, for example EFS where is stored the IMEIs, sometimes vendor, dtbo and persist images depending on the custom recovery if it includes these options.
Particularly, I never need any other partition from recovering eventually my device/s.
I would like to suggest you to try flashing some roms on any other device which you don't use(for ex. an old abandoned phone) and gain some experience before trying on your poco x3 pro.
dey18 said:
I would like to suggest you to try flashing some roms on any other device [...]
Click to expand...
Click to collapse
That was my idea. Unfortunately the only 'old' phone I've got is Huawei P9 Lite 2017 with Android 7. I haven't found any information, that there is a way to install LineageOS on the device.
However, for training purposes I could install any different OS, suitable for the device. Do you know any?
By the way, is the following link the only valid repository for the OS?
LineageOS Downloads
download.lineageos.org
kamien8 said:
That was my idea. Unfortunately the only 'old' phone I've got is Huawei P9 Lite 2017 with Android 7. I haven't found any information, that there is a way to install LineageOS on the device.
However, for training purposes I could install any different OS, suitable for the device. Do you know any?
By the way, is the following link the only valid repository for the OS?
LineageOS Downloads
download.lineageos.org
Click to expand...
Click to collapse
yes, thats the official site
kamien8 said:
That was my idea. Unfortunately the only 'old' phone I've got is Huawei P9 Lite 2017 with Android 7. I haven't found any information, that there is a way to install LineageOS on the device.
However, for training purposes I could install any different OS, suitable for the device. Do you know any?
By the way, is the following link the only valid repository for the OS?
LineageOS Downloads
download.lineageos.org
Click to expand...
Click to collapse
If you had no experience of flashing a phone, read and follow this guide with Pictures :
https://forum.xda-developers.com/t/4288121/post-85137963
It should be sufficient to help you flash a ROM.
No tutorial about backup data from phone in that guide, you have to do it on your own.
pl1992aw said:
If you had no experience of flashing a phone, read and follow this guide with Pictures :
https://forum.xda-developers.com/t/4288121/post-85137963
It should be sufficient to help you flash a ROM.
No tutorial about backup data from phone in that guide, you have to do it on your own.
Click to expand...
Click to collapse
I like this method, and this specific guide is what helped me flash custom rom on my X3 pro.
It is detailed and even gives notice if in case we get lost in a step.
I hope the OP can read this as the guide was really helpful. I know they used arrowOS for example, but I applied the method with different rom.
kamien8 said:
That was my idea. Unfortunately the only 'old' phone I've got is Huawei P9 Lite 2017 with Android 7. I haven't found any information, that there is a way to install LineageOS on the device.
However, for training purposes I could install any different OS, suitable for the device. Do you know any?
By the way, is the following link the only valid repository for the OS?
LineageOS Downloads
download.lineageos.org
Click to expand...
Click to collapse
I suggest you to try any other roms available for your device and not just lineage.
Try flashing multiple roms one by one and identify and rectify your errors.
And don't forget to read documentation provided by the wiki completely and also check out some vids on youtube(people on telegram would tell you to watch yt channel named "Munchy" because he has got this phone).
I wouldn't try and flash an old p9 lite. I remember when I had a p9 and tried to flash it it was a nightmare and was an unorthodox method. If you could grab an old Moto like the Moto g as that would be ideal for a practise flash.
Warren_Orange said:
[...] Moto g [...]
Click to expand...
Click to collapse
I've never used Motorola before. Which G would be good to start gaining an experience?
I'll try to find a pre-owned one.
I'd go for a moto g 2nd or 3rd Gen. You can get them for peanuts on eBay and there is still development for them even now.
I recommend Moto G5.. pretty active community on xda, replacable battery and should be very cheap
k3lcior said:
I recommend Moto G5.. pretty active community on xda, replacable battery and should be very cheap
Click to expand...
Click to collapse
Moto G5
Warren_Orange said:
I'd go for a moto g 2nd or 3rd Gen. You can get them for peanuts on eBay and there is still development for them even now.
Click to expand...
Click to collapse
Do you mean something like this?
gsmarena_moto_g
Will it be possible to go with LineageOS 18.1 on such an old phone?
kamien8 said:
Moto G5
Do you mean something like this?
gsmarena_moto_g
Will it be possible to go with LineageOS 18.1 on such an old phone?
Click to expand...
Click to collapse
Yes that's the one. After having a quick look at the forums I don't think you'd get 18.1 on it. There is a micro g 17.1 rom that seems active.
Is this for practice or for use as well? If it's for using I'd probably go with the g5 for a few bucks extra as the Moto g is quite old but it's not a bad spare spare phone. I picked one up as a backup and I liked the feel of it (if your into small phones) . It reminded me of the first Moto X.