So, I think I soft bricked my Huwaei GR5 MINI phone.
The problem is, it's stuck in the screen saying:
Your device has been unlocked and can't be trusted.
To learn more, visit: some link of emotiondownload.php
Your device is booting now...
Click to expand...
Click to collapse
and that's it, it's stuck here after I tried unlocking my bootloader officially. I basically tried to give an upload that came officially from Huwaei. I tried giving it after unlocking the bootloader and now it's stuck in the same screen. I can't close my phone nor I can open it. It's just stuck like this forever. I tried pressing long the power button. Basically, it turns off the phone and again opens but stuck at the same screen. Tried going to the recovery mode/fastboot mode but same result, it turns off the phone and comes back to the same screen saying the same message everytime.
Please help me anyone. I can't seemed to fix this problem by any means. It would mean the world if you could help me out regarding this issue.
Thank you tons for helping out !
Related
Ok, so had it unlocked, but running stock. Ran fine, then one day it stopped working and got stuck in a boot loop on the google screen. Managed to get it into CWM and then wiped, after lots of tries, and back to CM7 and unlocked. Then backed it out to stock and locked the bootloader(was planning on giving it to a friend who doesn't like to play with phones like that). But now it gets stuck on the google screen. Can get to fastboot, but if I do fastboot oem unlock it just has "..." and holds for hours(until I manually stop it) and then says it failed too many links. Can't get it unlocked, can't get it to boot into anything usable(either fastboot or the google screen and no further) and I'd really like to turn it back into a tablet for the kids to use since I've moved on. ADB devices shows error device not found but fastboot devices shows the serial number. I just really need to know how to unlock it so I can get it back and running. I think what screwed it up was I flashed it back to the way it came locked bootloader and then it said there was a OTA update, I said ok, downloaded it and when it rebooted it wouldn't go past google screen or past fastboot screen. If I try and do the recovery I get the triangle with exclamation point(yellow) and if I hit the power button a few times it tries to reboot and hangs. And yes, when I do the unlock the screen comes up, I move it to yes, hit power and then it freezes. Thoughts? Thanks in advance.
Ever Fix This?
Did you ever get this figured out? This is where I'm at after hours and hours to get to this point.
I have looked at multiple guides on this and other sites, googled and tried stuff and I cannot resolve this problem. Hopefully I am posting in the right place.
I took the jump and unlocked the bootloader on my Moto G first generation, XT1034 successfully. I flashed TWRP 2.8.60.xt1034.zip with adb and this was successful. Then I flashed Super SU 4.6 Update and that was successful. I got into trouble I guess when I tried to flash Cyanogenmod 12.1 nightly. I used TWRP to flash via install. The flash had an error, which unfortunately I didn't write down. I believe it was something to do with a partition. However, it looked like the flash failed. At this point and for hours I have been trying to fix the "Warning Bootloader Unlocked Loop I am stuck in.
I have been able to get into the phone and flash via adb commands. I've tried several commands suggest to fix this that I have found in forums. I have tried flashing several recoveries including an older TWRP per the method in this thread, a clockworkmod - and the original 2.8.6.0.xt1034. When I get into the phone bootloader which is available, I have not been able to access any options in recovery. Pushing the power button on recovery leads to a blank screen sometimes followed by a recovery starting or a Motorola Logo starting up and a couple times a recovery. TWRP has started a couple times, but never gets past the intro screen, where it locks up. clockworkmod (clockworkmod-6.0.4.7-falcon.img started once after flashing through adb and gave me flash options. I tried to sideload, didn't understand, went back and the recovery locked up. These recoveries no longer load at all.
Through all of this the "Warning Bootloader Unlocked" logo screen comes up after plugging into the computer (Windows 8.1).
Example, I open the phone bootloader by waiting for the phone screen to go from the "Warning Bootloader Unlocked" screen to blank - it cycles from logo to blank. If I'm quick the phone and hard boot the phone will boot into bootloader. I connect to the laptop through USB. When I toggle to recovery and hit the power button the screen goes blank, the Motorola Logo pops up, goes blank and then the "Warning Bootloader Unlocked" appears. The Laptop then seems to connect and disconnect as the Warning screen comes on and turns off.
The factory selection just goes to a blank screen.
I would really appreciate some advice on how to get the phone back to a state in which I can work with it and try again. It is very difficult wading through all of the information out there. I've learned a lot through this issue, but can't take it any further.
Thanks, Jeff
Solved - Stuck in "Warning Bootloader Is Unlocked" Loop
This resolution took many hours to figure out, but I finally got there with this guide - http://forum.xda-developers.com/showthread.php?t=2542219, this thread - http://forum.xda-developers.com/showthread.php?p=54855457#post54855457 and this thread - http://forum.xda-developers.com/gen...e-firmware-t3042687/post59139823#post59139823.
I tried RSD Lite on different computers and USB cables I could not get the device recognized. So I ended up with the MfastbootV2 method to reload stock firmware, which I found on the firmware thread above - this was big, as my phone is with Wind Mobile in Canada and the link is the right one. The only thing I picked up from a different website was to use a computer with USB 2 ports. This is what I did, but I don't know one way or the other if USB 2 was needed. .
Can't thank you hard working guys enough for the time you take to put these threads together. I'm back up and running. As a bonus, after a big clean up in the process, my phone is running fast again.
Thanks everyone.
I was booting up my phone normally, when my phone shut down because of battery. Now I cant seem to fix it, because it has gotten stuck on the warning screen. I tried flashing philz and TWRP using videos, but it just says "no command" i really need help asap.
paranjaya said:
I was booting up my phone normally, when my phone shut down because of battery. Now I cant seem to fix it, because it has gotten stuck on the warning screen. I tried flashing philz and TWRP using videos, but it just says "no command" i really need help asap.
Click to expand...
Click to collapse
And it keeps rebooting
Hey guys,
I really want your help right now, i stuck my phone, because i wanted to unlock bootloader, so i did. Tried to install TWRP, and i don't know is that install succesful, i tried to key combination, but it don't go to TWRP boot, so i end this. Later i Relock bootloader, everything was good, but i saw that option "screen lock" in developer settings is enabled, and i can't turn it off, so i decided to install update (L21C432B380) but it always end with failed, i thought it was fault relock boot, so i wanted to unlock again with that program "SRK Tool Huawei", and i did, but now when i launch my phone, it's stuck at "Your device has been unlocked and can't be trusted..." "your device is booting now". . When i turn it off with "Power off+Volume down+Volume up" it's restart again. Computer don't see device, what can i do? Someone can help me? I really want to unstuck that phone
Sorry for my english.
I unrooted my phone through Magisk Manager to get the Android 10 update, and I guess I missed a step. Because when my phone rebooted, it comes up with the "No Command" screen after showing the unlocked bootloader warning.
I am able to enter the recovery mode and all of those settings, but my phone wont boot normally. It doesn't even show the Motorola "M". If I leave it on for a bit, it will switch between the unlocked bootloader warning and the no command screen. I've already tried a factory reset but that does nothing.
Am I stuck with a broken phone, or is there another hope? I'll do my best to provide more info if needed. Please help!
Randomsamm said:
I unrooted my phone through Magisk Manager to get the Android 10 update, and I guess I missed a step. Because when my phone rebooted, it comes up with the "No Command" screen after showing the unlocked bootloader warning.
I am able to enter the recovery mode and all of those settings, but my phone wont boot normally. It doesn't even show the Motorola "M". If I leave it on for a bit, it will switch between the unlocked bootloader warning and the no command screen. I've already tried a factory reset but that does nothing.
Am I stuck with a broken phone, or is there another hope? I'll do my best to provide more info if needed. Please help!
Click to expand...
Click to collapse
What recovery u using I would look for orange fox and fastboot into that there is more things u can do if you don't want to save any thing I would reflash using orange fox recovery the rom u want I would use bliss or havoc I'm on now supper stable everything works and it's Android 10