Related
Yesterday my phone started acting up. All running process crashed and not many was able to start. I had to constantly click "force close". I think this started after I installed the Google+ app, but not sure.
I have tried uninstalling all unnecessary apps, without luck. I then tried wiping to factory settings by using the Android menu, but without any changing. I then tried by holding vol+ and power, going in to recovery and wiping both to factory and app cache. This doesn't change anything either. By googling I can see some suggests to hold vol- and power, to get to a another wiping-functionality but this just boots my Nexus S to normal state - no menu appears.
Has anybody an idea of what I can do?
Edit: more info; if I click "Report" and investigate the message sent to Google, I see that error has something to do with SQLite-relatet classes. Which makes some sense, alot of my changes are reset each time the phone is rebooted. For instance did I miss a call a couple of hours before the phone went crazy - this is shown at each boot in the notification area eventhough I clear the area and/or goes to missed call section
Factory reset via menu does delete all your "custom" apps, so I'd say it's not one of the existing apps causing problems.
The way you describe function after your factory reset sounds like factory reset didn't work properly.
If you feel safe I'd recommend rather flashing 2.3.4 again using either Odin or the OTA zip from Google (requires open bootloader).
I think you're right that factory reset doesn't do what is expected. Once I click it, the phone reboots and shows the Android guy next to an unwrapping package. This lasts only 2 seconds, then it reboots itself again and goes into normal phone mode (where all the app-crashing starts again).
I have not flashed or rooted my phone before, but I will consider this now since my NS is pretty much a brick. Thank you for your swiftly response.
Edit: Shouldn't I get a menu, when I push and hold vol- button, while turning on the device? Right now it just boot as normal.
Before you use odin....try going into rom manager a reflashing clockwork! Ive had that android dude on my screeen but reflashibg via rom manager always fixed it. Try that
Sent from my Nexus S using XDA Premium App
Wow my Nexus has totally shut me out.
I cannot use ClockworkMod unfortunately since I am not able to root my phone. It is not detectable via USA (when I use vol+/pwr and connect USB). I am unable to check the USB Debugging option on the phone. Each time I check it, go to home-screen and back to the menu, it has de-selected it again. Also I noticed when I read the info that is sent to Google for all those app-crashes I get, I see SQLiteException and error in an SQLite.java file. So it seems like some database layer is broken.
I read one could copy the ClockWork.img to my phone and use the standard recovery option to flash the img (I think). But when I go into the recovery menu, the file is gone. When I boot the phone again, it has deleted the .img file - eventhough if I copy it to several different folders, they are all gone :-(.
I feel pretty screwed at the moment. How can I else wipe all data?
I'd recommend to check if your device is correctly identified in windows. Missing USB drivers might cause problems. Get the latest drivers and a guide from here.
If you succeed booting into fastboot properly (vol up and power) you can follow this guide. Get the latest cwm recovery.img here.
Last option would be to boot into download mode (vol up + vol down + power + plugging in usb cable) and use Odin from samfirmware.com
--
All options require correctly working USB drivers.
I managed to unlock the bootloader, by quickly turning on USB-debugging (before any processes started to crash) and install the drivers from this post:
http://forum.xda-developers.com/showpost.php?p=6819751&postcount=4
A reboot later, I got this message:
"System UIDs Inconsistent
UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable."
Right below was a button saying "Im feeling lucky" (??)
I installed ClockworkMod using fastboot and tried "Fixing permissions" with no luck. I will try some ROM later on, and hope it will bring my phone back
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
rentaric said:
Normally this error happens when you have a faulty app ruining your system, formating/deleting whole sdcard does usually fix this.
Click to expand...
Click to collapse
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
DennisRP said:
I can safely mount USB-storage and format the whole bunch?
I been sweating over this stupid issue all day now, all I want is a fac-reset :´(
Edit: "format /sdcard" using CWM didn't do anything
Click to expand...
Click to collapse
See I'm no expert on this whole thing. At this point I'd just flash a whole new system via Odin. Prolly not the smartest or safest option, but that's what I'd do because I don't know better. If that wouldn't fix it either, I'd return the phone on warranty
I was looking at Odin from the start, since nothing else seemed to be working.
So right now I got started on Odin. Followed the .pdf steps and flashed the bootloader at first succesfully. I was asked to remove the battery and re-connect my NS. Began downloading "pda" and "phone", but at around 10% a big fat red "fail" message appeared and now I just see the Google-logo on startup. I still cant flash any roms via fastboot.
Im too tired too right now, been working with this for 14 hours straight. I will look at it tomorrow evening. Thanks for your help rentaric
Weird, you're not the first one who had trouble running Odin using their guide.
Overall it's pretty simple.
Enter download mode. Vol up vol down and power at the same time while plugging in the USB cable. Start Odin, should show a yellow colored box with a port number. Uncheck everything but reset timer and auto reboot. Unzip the correct zip file from samfirmware.com (check if you got i9020 or i9023 and get the universal Odin exe), apply file from the folder accordingly. Bootloader and bootloader. Phone and modem. Pda and pda. Csc can remain empty (will change carrier info in fastboot).
Double check md5 hash to avoid broken files.
Sent from my Nexus S using XDA App
rentaric said:
Weird, you're not the first one who had trouble running Odin using their guide.
Click to expand...
Click to collapse
Of course I did not go to bed, how should I be able to sleep with a broken phone .
The firmware suggested on samfirmware.com for my phone, was 2.3.3 and some other version (my phone was 2.3.4.2/GRJ22 or something similar, I suspect that might be the cause. Also I unchecked everything, that might also have been of importance). The flash will always fail when everything was downloaded - it then said something about "remote" and "Loke" and then fail. But as I mentioned, I had succesfully flashed boot.img (2.3.3) thus no boot occured now. I googled the correct bootloader, used fastboot and was booting succesfully again.
I began looking more into the sdcard, as error-messages was leading me this way. To compress 4 hours of investigations into a few lines, it seems as my PBA is malfunctioning as other xda-members have experinced. Only solution is sending the phone to Samsung for a PBA replacement. I purchased the phone in Bestbuy USA and the danish Samsung partners are not too joyfull about this - I will contact Samsung and hope they can help me.
I experinced the exact same thing as this poor guy - http://forum.xda-developers.com/showthread.php?t=993403
Every thing you try to do to /sdcard is worthless.
Formatting (USB/using CWM/using adb shell linux commands) says "Succes" but nothing happens.
Copying files says "Succes" but nothing happens. If I boot phone into CWM, mount usb and upload new rom/apk/whatever and try to do a "install update.zip" it fails with some mounting errors.
Im ready to go cry in a corner - I really want this to be fixable via software, but I probably have to realize that this is a hardware issue.
Apparently Samsung doesn't offer worldwide warranty for cellularphones :´(. God it sucks to pay repair-expenses on a 1 month old mobile.
I can’t seem to fix my s8+ when I try to Flash anything in Odin I keep getting complete (write) failed. When flashing stock firmware I keep getting (...) Fused 2 > Binary 1
Or it will fail to erase
I cannot boot into recovery at all - freezes/won’t even boot there
Normal boot or safe boot doesn’t matter either sends me to the blue screen where it loops either Erase or apply update and then about 5-10 lines of code then reboots.
BTW it’s the SM-G955U1 model unlocked
If someone would link me to the latest firmware that may help. If the latest Oreo beta just to get out of this mess that would also be appreciated too.
Also when I open up smart switch it says the device is incompatible with it.
I will edit with video of the issue
Edit:
well i got it up and running, i guess it came down to the BL being Ver2 and because of that it would prevent me from installing anything that ran on V1/rev1.
well now a new issue has popped up... No service.... Prob because its using 955u firmware and im not using the main verizon carrier -- im using flash wireless...
my phone and pc recognize my phone as a 955u device .
is there any way for me to go back to 955u1 firmware? Please help.
will i be able to switch when samsund decides to release the oreo for the 955u1?
Thanks
Fixed finally
For all of you out there who happened to get stuck on 955u firmware containing bootloader 2 installed on the 955u1, there is hope!
I have successfully gotten back to 955u1 firmware and running OREO.
You will need (I will give Links to files in a post to follow) (Carrier in BL says XAA):
USB 2.0 PORT
PRINCECOMSEY ODIN 3.12... link
regular ODIN 3.13.1 (what i used) link
G955U1UES2AQL1_G955U1OYM2AQL1 Firmware (link in post to follow)
G955U1UEU2CRB9_G955U1OYM2CRB9 Firmware (link in post to follow)
Official Samsung Cable that came with phone (preferably)
Windows OS
A Galaxy S8+ 955u1 Phone (only tried with this)
Instructions:
1. Extract both firmware files/zips (Put in 2 seperate folders so no mixups)
2. Reboot your phone to download mode (Power off then -- Power + Bixby + Volume Down at same time)
3. Open up princecomsey ODIN and then connect your phone to USB 2.0 Port
4. Add in the AQL1 Files - (BL, AP, CP, CSC) -- (I personally first did the AP, CP, and CSC then had it reboot then i restarted and flashed the BL by itself then rebooted) and press start. (I unchecked everything but reboot and f.reset time)
5. Unplug and Wait for it to turn on to the setup screen, then finish the setup. If you open up settings it will be all jumbled up and weird, but dont worry. If you dont have service yet - dont worry.
6. Now after the phone is all setup (or if you decided to skip), unplug and power off the phone then boot into download mode again.
7. Now open up Regular odin and reconnect the phone
8. Now put in the CRB9 files (BL, AP, CP, CSC) (I put all in this time and i used the Home_CSC this time but you can use csc normal but no guarantee that would work with getting service again as i didnt try it) and press start and wait til it finishes and reboots
9. ENJOY!!!
I will make a new forum for this tutorial soon
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
J727P
Nupid Stoob said:
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
Click to expand...
Click to collapse
ok you have an older phone the J700P you can start by downloading odin an twrp recovery an superSU zip you can get twrp from here !https://twrp.me/devices/samsunggalaxyj72015qcomsprint.html
an odin from here
https://mega.nz/#!nYVDXBAC!_cTWbW4_Ow8sZMWcZvO7bVwEEBFlD1DQsB5NeFhj1EY
An just google latest superSU zip to find that !
good luck !
step 1 enable oem in development settings !
step 2 put phone into download mod an flash twrp then boot into twrp recovery an flash superSU zip !
Thank you for the info. I'm presently confused. Here's what I've done:
I ran Odin and flashed with twrp-3.2.1-0-j7ltespr.img.tar. It went through successfully going off odin's message.
Vol. up + home + power. It'll eventually show a yellow triangle with the white trash can guy on it's side stating "No Command". Power + up gets the Android Recovery screen.
At this point, am I supposed to choose the Wipe Data/factory reset option? I see tuts that seem suggest I should already be in the twrp UI or something. I've tried watching vids and looking at a handful of tuts, but either they are the wrong phone, too old, the button combos show something else entirely, etc.
Thanks!
Anyone? Videos show the buttons vol. up + home + power as booting right into twrp recovery gui. For me, it's going into "Android Recovery" screen. Is there an extra step with Odin or something that I missed? Or am I supposed to wipe/boot in the Android Recovery screen and it'll boot the twrp recovery gui? If bricking something I'm not familiar with wasn't a concern, I'd be courageous with it.
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
J700P
Nupid Stoob said:
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
Click to expand...
Click to collapse
Ok when flashing twrp with Odin first uncheck auto reboot in options flash twrp pull battery replace battery an boot into twrp an flash superSU zip then reboot system !
Thank you so much Peter! That did the trick THANK YOU :good:
For posterity to anyone else w/limited root knowledge with a SM-J700P Virgin variant running 7.1.1 (and what was most recent factory updates until this point); Flashed the twrp-3.2.1-0-j7ltespr.img.tar again w/o auto reboot in options of Odin, pulled battery once safe (i.e. you get the "Pass" message from Odin confirming everything went as planned) to get out of the downloading screen, replaced battery, booted the recovery (vol up + power + home) and it finally booted into the twrp recovery gui. Selected the "Install" option, then went to where the supersu.zip was stored on the SD (I created a separate "supersu" folder via PC connection for easy locating; internal phone memory card looks to now be unlocked, so can most likely use that if you don't have a SD card). Checked the "reboot once installed option" in the gui box and swiped to install supersu,zip and verified it was rooted via app after phone fully booted back up.
BTW, If anyone gets a hang/crash in Odin immediately after trying to select a twrp tar image in the "AP" box, try downloading the twrp image via PC instead of the through the phone (the legit twrp site that has the repository of past/current .tar), and just put it somewhere like Odin folder on desktop. Somehow, mine were getting corrupted via phone download through the twrp app, and Odin would NOT recognize the file was bad/corrupt when trying to select it via the AP box and hangs instead of giving a warning message. I ran into this earlier on then noticed the file was too small for some reason after viewing it on my PC, hence the Odin hang that needed a task manager kill.
I hate to necro an old thread but I still do not want to create an entire new topic for a single question. If I was to follow this info will it wipe the phone or will it simply root it while keeping all data on the phone? I ask as it is my wife's old phone and she would be pissed if I wiped her apps and everything on accident since she wont be able to remember what she had.
Edit: also when I add the TWRP file to odin it immediately hang/crashes like OP mentions but I am already DLing via pc. any thoughts?
Hi there,
I am trying to repair a stock S7 (G930F) which freezes after an OTA-update. About a year ago there was a similar problem, which I solved by flashing an older firmware and telling the owner not to do the update again. Now the update was done again and this time Odin does not let me downgrade due to "KERNEL REV. CHECK FAIL".
The freeze appears 10 to 20 seconds after reboot. The phone freezes completely and after 20 seconds it restarts. That's not enough time to complete the initial setup or anything else.
I tried many different stock ROMs, full-wipe by stock-recovery, re-partitioning with Odin, safe mode, all with and without SD-card, SIM-card and cable plugged in.
I can't try custom ROMs or TWRP due to the FRP (force reset protection). To disable this a have to login with the previous Google-account... this is not possible within time before the phone freezes. My last idea would be to search for a method to remove the FRP in the darker pages on the web and then using TWRP and custom ROMs. Or the dangerous NAND-Erase in Odin (I have no EFS-backup)?
Any ideas except buying a new one?
Thanks,
Philipp
philipp-h said:
Hi there,
I am trying to repair a stock S7 (G930F) which freezes after an OTA-update. About a year ago there was a similar problem, which I solved by flashing an older firmware and telling the owner not to do the update again. Now the update was done again and this time Odin does not let me downgrade due to "KERNEL REV. CHECK FAIL".
The freeze appears 10 to 20 seconds after reboot. The phone freezes completely and after 20 seconds it restarts. That's not enough time to complete the initial setup or anything else.
I tried many different stock ROMs, full-wipe by stock-recovery, re-partitioning with Odin, safe mode, all with and without SD-card, SIM-card and cable plugged in.
I can't try custom ROMs or TWRP due to the FRP (force reset protection). To disable this a have to login with the previous Google-account... this is not possible within time before the phone freezes. My last idea would be to search for a method to remove the FRP in the darker pages on the web and then using TWRP and custom ROMs. Or the dangerous NAND-Erase in Odin (I have no EFS-backup)?
Any ideas except buying a new one?
Thanks,
Philipp
Click to expand...
Click to collapse
Philip, it helps if you let us know what country your in.
Anyway the solution to your problem is pretty straight forward, you just need to flash the latest firmware for your region with Odin. No need to mess about with TWRP at this point.
Official firmware will contain a copy of the stock kernal which will also be installed when you flash with Odin 99% of the time. If for some reason the kernal is not flashed (it happens) and you continue to get the reboot issue then you will need to flash the kernal seperately first with Odin then the firmware afterwards.
The issue with the FRP lock will remain after this but should allow you to unlock with google email and password.
So we're talking, downlaod mode, flash official fimrware and go from there.
Hi cooltt,
thanks for your reply. Unfortunately I already tried many stock ROMs. I am from Germany, so of course DBT first (G930FDBT7ESL9), then VIA (Telefonica) and VD2 (Vodafone) since they had higher build numbers. Desperately I also tried other versions to get it running somehow (for example the Polish G930FPRT7ETA9). The kernel was successfully installed with all ROMs.
I was very confused, that this does not work. In my understanding this can not be explained. After full wipe/repartition and flashing stock it should be as "stock" as it can be (and everyone should have these problems). Either all these ROMs I tried are broken, some hidden things like EFS are heavily broken or there is a hardware issue with this phone which made absolutely no problems with Nougat but now with Oreo.
Bootloops after OTA (which are dirty) are usual, but this is driving me crazy. I can not believe in a hardware issue since a very similar problem appeared one year ago with Oreo and there were never any issues with Nougat. But if it is a software problem, more users should have this...
philipp-h said:
Hi cooltt,
thanks for your reply. Unfortunately I already tried many stock ROMs. I am from Germany, so of course DBT first (G930FDBT7ESL9), then VIA (Telefonica) and VD2 (Vodafone) since they had higher build numbers. Desperately I also tried other versions to get it running somehow (for example the Polish G930FPRT7ETA9). The kernel was successfully installed with all ROMs.
I was very confused, that this does not work. In my understanding this can not be explained. After full wipe/repartition and flashing stock it should be as "stock" as it can be (and everyone should have these problems). Either all these ROMs I tried are broken, some hidden things like EFS are heavily broken or there is a hardware issue with this phone which made absolutely no problems with Nougat but now with Oreo.
Bootloops after OTA (which are dirty) are usual, but this is driving me crazy. I can not believe in a hardware issue since a very similar problem appeared one year ago with Oreo and there were never any issues with Nougat. But if it is a software problem, more users should have this...
Click to expand...
Click to collapse
Hello Philip this might be a long post
What firmware was on the device before the problem started? Was it branded or unbranded?
Are you sure the phone is a genuine G930F or a phone that has been turned into a G930F by flashing that firmware in the past? You can check by looking at what the phone model is at the top left corner of "Download mode"
Where are you getting the other firmwares from?
I've attched Samfirm tool which will get the latest firmware direct from Samsung servers.
1. Unzip file
2. Right click on SamFirm application and run as admin.
3. Check "Auto" & "check crc32" & "decrypt auto"
4. Model is "SM-G930F" type it exactly as shown without quotes
5. Region is "BTU" . Offically UK with all EU language options but also additional files which will fix firmware install problems.
6. Press "check update" then "download". It will decrypt automatically and you will have a zip file with 5 files inside(BL,CSC,AP,CP,CSC_HOME) choose CSC not CSC_Home when placing into Odin. Place all other files in right place.
Odin attached is version 3.13b patched. This version of Odin will ignore lots of miss-match device errors and just install the above BTU firmware.
cooltt said:
Hello Philip this might be a long post
What firmware was on the device before the problem started? Was it branded or unbranded?
Are you sure the phone is a genuine G930F or a phone that has been turned into a G930F by flashing that firmware in the past? You can check by looking at what the phone model is at the top left corner of "Download mode"
Where are you getting the other firmwares from?
I've attched Samfirm tool which will get the latest firmware direct from Samsung servers.
1. Unzip file
2. Right click on SamFirm application and run as admin.
3. Check "Auto" & "check crc32" & "decrypt auto"
4. Model is "SM-G930F" type it exactly as shown without quotes
5. Region is "BTU" . Offically UK with all EU language options but also additional files which will fix firmware install problems.
6. Press "check update" then "download". It will decrypt automatically and you will have a zip file with 5 files inside(BL,CSC,AP,CP,CSC_HOME) choose CSC not CSC_Home when placing into Odin. Place all other files in right place.
Odin attached is version 3.13b patched. This version of Odin will ignore lots of miss-match device errors and just install the above BTU firmware.
Click to expand...
Click to collapse
Hi cooltt and thanks for your help!
Unfortunately the BTU-ROM did not solve the freeze-reboot-problem but led to another: After flashing the phone gets stuck with a blue screen "Erasing". After several hours I force rebooted and now it is showing a similar screen with "Error!" and a percentage which is increasing to a random number from 0% to 12% on each boot. On first boot it shows the boot screen ("Galaxy S7"), then "Installing system update" shortly and then "Erasing". After force-reboot it shows boot screen, "Erasing" then "Installing system update", both for a very short time (sometimes misses "Installing...")
As suggested I used SamFirm to download the newest BTU-ROM (SM-G930F_1_20191218140415_dgobhw6g3v_fac; G930FXXS7ESL5/G930FOXA7ESL5/G930FXXS7ESL5/G930FXXS7ESL5). I just ticked F. Reset Time and Reboot. Re-Partitioning did not change anything. Using Odin v3.13.1 does not make a difference. The other ROMs, like SM-G930F_1_20191226131628_8ds2p6kf0v (G930FXXS7ESL9/G930FDBT7ESL9/G930FXXS7ESLA/G930FXXS7ESL9) which I downloaded with Frija (should do the same: download enc4-files from Samsung and decrypt) make the phone going to the initial setup fine, but with the reboot-problem. Tried also with Odin 3B patched.
At this point I was going to write, that I could not access the recovery mode with the BTU-ROM but just now I started it unintentionally when looking for the sequence of screens showed on boot. So I used my chance, made a full wipe and screenshot. After this the phone booted until the glowing "Samsung"-logo appeared. Then rebooted and went to initial setup (after "Androi"Installing applications") in German. The freeze-reboot-issue appears as with all the other ROMs.
The phone is certainly an original SM-930F as it was bought directly from a big, trustworthy dealer and then just used by my aunt. The only one touching it when problems appeared was me. There is SM-G930F printed on the backside and showed in download mode.
Gallery with screenshots (as I cannot find way to upload attachments - although I posted attachments on XDA before...): https://forum.xda-developers.com/album.php?albumid=16089
philipp-h said:
Hi cooltt and thanks for your help!
Gallery with screenshots (as I cannot find way to upload attachments - although I posted attachments on XDA before...): https://forum.xda-developers.com/album.php?albumid=16089
Click to expand...
Click to collapse
Hi Phill
The only options checked in Odin should be F-Reset and Auto reboot. Don't check any others.
The blue screen erasing and updating is normal after a flash with Odin, the phone will restart a couple of times, just leave it do it's thing for a bout 10 minutes or so. If it's any longer than that as you have mentioned then it's stuck as you've said.
So we're going to start from the begining again but do something slightly different.
1. Place the phone into download mode
2. Run Odin but uncheck "Auto Reboot" so the only option checked is F-Reset Time.
3. Use whatever firmware you want, BTU or DBT the latest version. Make sure files are in the correct boxes.
4. Connect phone and flash with Odin, wait until Odin says "succeed 1" and "dissconnected" . It may even say "pass" in green, not important but "succeed 1" is important.
5. Your phone will show the bar and do not disconnect. So....disconnect from laptop / PC. The screen should remain "do not disconnect".
6. Hold volume down+home+power (in that sequence).
7. As soon as the screen goes black move your finger to volume up, while still holding down home + power. You are trying to get the phone into Recovery mode as you said earlier.
8. The option to choose in the recovery menu is "wipe cache partition" NOT "wipe/factory reset". I can see from your pictures that this option has failed because the FRP lock is still on!!
9. When you've chosen "wipe cache partition" then choose "reboot system now"
The phone should go through it's normal set up routine, erasing, update, installing apps etc, just leave it do this and hopefully the phone will boot then ask for the Google email and password which was used on the phone.
There are very few reasons for the phone to get stuck on boot....
1. Incorrect firmware,
2. Water damage
3. The phone has been Rooted with FRP lock on. It is very rare to be a hardware issue.
You should always turn FRP lock off and enable OEM unlock in settings before flashing to a phone. I know it's a little late for that but something to remember.
To check for water damage.
1. Remove SIM card and holder
2. Shine a light in the hole, you will see a WHITE sticker which turns PINK if water has ever got inside the phone.
Thanks a lot again for your great efforts!
I tried as you wrote but did not manage to start recovery immediately after flashing (tried >10 times). But after some while the BTU-ROM started and now keeps doing so even after new flash without wiping cache afterwards. Wiping data worked for me in past when I sometimes had enough time to enter Wi-Fi-password. It was saved even after reboot and away when I did data wipe in recovery. With the newest ROMs I never got beyond typing Wi-Fi credentials.
I cannot see a water damage. A root was never tried before (and OEM-lock and FRP were always on because stock, which is very bad now ). Would be absolutely no problem if this !#@*#% stock ROMs would work... TWRP installation was directly blocked when I tried my luck as last resort. I did not try other images.
Thanks nevertheless for your time and patience!
sooo 4ish years ago I rooted my galaxy view, the tablet still works great but without being able to watch basically any streaming service due to it being rooted. I attempted to unroot the device. anywho in the process from the root menu I factory reset, knowing it wasn't goin to work buh hey just for ****s n gigs. anywho than I wiped device via root menu, but of course thats not the answer, now the tablet doesn't even have an OS yet alone the root menu to boot into.
So I'm on Odin, with my correct tar.mp5 file loaded into AP of odin. I hold down power and volumes to boot into Download mode. Volume up to enter. than connect cord, Odin pairs successfully, I add the tar to AP, check and uncheck the proper boxes. hit start n get held up at Setup Connection. leave it for a few hours and nothing... multiple attempts, nothin. wondering if since I wiped the OS and basically whole SSD, if now I need to first reinstall OS and if so how?
5th times the charm. not sure what was going on. persistence is all that's needed I guess.