Hi there, I want to relock my bootloader and install stock recovery for X507, EUI 019s, is there any guide to do that?
P.S: I want my phone back to stock, didn't find any link for stock recovery, also i don't wanna use sp tool as it bricked my device last time, so complicated.
Right now bootloader is unlocked and twrp installed.
Thanks in Advance!
worgamerx said:
Hi there, I want to relock my bootloader and install stock recovery for X507, EUI 019s, is there any guide to do that?
P.S: I want my phone back to stock, didn't find any link for stock recovery, also i don't wanna use sp tool as it bricked my device last time, so complicated.
Right now bootloader is unlocked and twrp installed.
Thanks in Advance!
Click to expand...
Click to collapse
Flash twrp flashable eui5.8.19s zip it will also restore your stock recovery
Related
Hi guys, my tablet is on the stock 4.2.1 and is unlocked. Somebody know how to root this one and put CWM ?
You might be able to use MOTOCHOPPER, then use TWRP recovery. Better recovery. flash 2.4.4.0 JB. You can find the instruction on how to flash the recovery on their website. http://www.teamw.in/project/twrp2
Hope this helps
DO NOT FLASH THE JB VERSION!!!!! Flash the TWRP version that ends with "-4.2", NOT "-JB" or you will brick!
c0ded said:
DO NOT FLASH THE JB VERSION!!!!! Flash the TWRP version that ends with "-4.2", NOT "-JB" or you will brick!
Click to expand...
Click to collapse
HE's RIGHT.. THAT RECOVERY WILL GIVE YOU PROBLEMS.. I HAVE MANAGED TO RECOVER FROM THAT STATE.
Hi... im currently running
CROMi-X v5.2.2, which is based on rom 10.6.1.27.5 with twrp 2.5.0.0 and my bootloader says is the one that came with us10.6.1.15.3-20130416...
To install omni kitkat, im been asked to have the latest bootloader, to avoid screwing up im planning on insalling the latest stock from asus...
However, each time i install a stock through twrp or cwr, the new image not only updates the bootloader and deletes all my data, but rewrites my recovery, for which then i have too reupload using fastboot to upload the recovery...
Is there any way to make sure i dont loose the recovery after flashing a stock firmware... or a way to flash the recovery from the recovery before rebooting after flashing the stock?
Thanks everyone!
mertonv said:
Hi... im currently running
CROMi-X v5.2.2, which is based on rom 10.6.1.27.5 with twrp 2.5.0.0 and my bootloader says is the one that came with us10.6.1.15.3-20130416...
To install omni kitkat, im been asked to have the latest bootloader, to avoid screwing up im planning on insalling the latest stock from asus...
However, each time i install a stock through twrp or cwr, the new image not only updates the bootloader and deletes all my data, but rewrites my recovery, for which then i have too reupload using fastboot to upload the recovery...
Is there any way to make sure i dont loose the recovery after flashing a stock firmware... or a way to flash the recovery from the recovery before rebooting after flashing the stock?
Thanks everyone!
Click to expand...
Click to collapse
Flashing the stock ROM reverts the tablet back to stock, so the recovery must go. Luckily, the bootloader you are on is compatible with the KitKat recovery (10.6.1.15.3) so you shouldnt have to flash the stock ROM at all. If you were on 10.6.1.8, you would have had to upgrade.
cmendonc2 said:
Flashing the stock ROM reverts the tablet back to stock, so the recovery must go. Luckily, the bootloader you are on is compatible with the KitKat recovery (10.6.1.15.3) so you shouldnt have to flash the stock ROM at all. If you were on 10.6.1.8, you would have had to upgrade.
Click to expand...
Click to collapse
Thanks, then guess i only need to flash the kitkat twrp...
Asked the same question about my bootloader at the omni thread to be sure, if they say that it works too, will go ahead and give it a try
hello guys i need a little help. i am using sony xperia 2011 device which is xperia mini st15i.
its rooted with eroot on stock rom and stock kernel with locked bootloader.
i wanted to install cwm mod on my phone but i found that i cant install cwm on my device as my stock kernel does not have recovery partition and i dont want to unlock my bootloader atm. i tried xparts and xdaromhub to install cwm on my device without unlocking bl but none of the method seems to be working for me. now i am thinking to go ahead and unlocking my bl and install a custom kernel but i want to know is there any method by which i cam backup my current state of my phone i.e. in future if i want to revert back to stock rom and stock kernel with bootloader locked like it was never unlocked. if there is a method for that please tell me or if u know any other method of installing cwm without unlocking bl pls tell me that too. also i have a backup of my stock firmware from pc companion which i made .ftf file with flashtool. i have flashed it successfully in past so will that firmware relock my bootloader and revert to stock kernel and stock rom if i flash it with flashtool after unlocking bl? any help would be greatly appreciated. thank you so much for reading
hi i installed old version of xparts and i was able to install the cwm 5.0 and make it work but still i cant install 5.5 version of cwm from latest xparts any suggestions. also pls can any1 tell me about my question above that will the stock firmware .ftf file relock bootloader and stock kernel? pls any help even a little would be appreciated thank you
So me start from the beginning , my phone C2104 was completely updated i used this method to unlock my bootloader and used flashtool http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955, it unlocked and fell into bootloop so i continued with the method used flashmode to flash C2105_15.0.A.1.31_CE.ftf Stock Rom via Flash tool it worked and i was out of bootloop then i tried few method to root the device didn't workout i found this link http://forum.xda-developers.com/xperia-l/development/kernel-extended-stock-kernel-v6-t2321550 followed it got the CWM recovery started then i flashed Glade Rom V-2.0 and CM11-23FEB both go into bootloop and yes tried flashmode to flash C2105_15.0.A.1.31_CE.ftf Stock Rom again didn't work only errors and now guys come in need your help and guidance and thank you..
You are doing right thing but it happens because I think your on version 4.1.2
Flash the latest firmware 4.2.2 then
Use towelroot app for root access
Flash the kernel thru flashtool that u mention in post.then try it will work
Hi all i just bought this mobile and i was curious to know if it was possible to install a custom rom.
I saw that the downgrade is the only solution to root and install custom recovery.
In my case i wish to know which file i have to flash with flashtool.
Thanks all
http://forum.xda-developers.com/showthread.php?t=3017056
You just have to follow this Guide...
Gesendet von meinem D6603 mit Tapatalk
My Z3 is totally stock i didn't made any backup and save of DRM TA etc. can i do the downgrade anyway?
Thanks
PdorITA said:
My Z3 is totally stock i didn't made any backup and save of DRM TA etc. can i do the downgrade anyway?
Thanks
Click to expand...
Click to collapse
Yes
Update:
Downgrade --> Done
Root and DualRecovery--> Done
Backup DRM TA --> done
Bootloader Unlock --> Done
I'm trying to flash custom room rebooting in Teamwin recovery the flash goes perfect but after when i reboot the Z3 it goes in boot loop and i can enter only in the recovery the Z3 won't start at all.
I've tryied with 2 custom ROm and the original rom lollipop rooted and patched.
What i do wrong? I just put the custom rom in the Micro-sd card and i flash it using the teamwin recovery (before i wipe cache and Dalvik). Do i have to flash before the boot.img?
Thanks
PdorITA said:
Update:
Downgrade --> Done
Root and DualRecovery--> Done
Backup DRM TA --> done
Bootloader Unlock --> Done
I'm trying to flash custom room rebooting in Teamwin recovery the flash goes perfect but after when i reboot the Z3 it goes in boot loop and i can enter only in the recovery the Z3 won't start at all.
I've tryied with 2 custom ROm and the original rom lollipop rooted and patched.
What i do wrong? I just put the custom rom in the Micro-sd card and i flash it using the teamwin recovery (before i wipe cache and Dalvik). Do i have to flash before the boot.img?
Thanks
Click to expand...
Click to collapse
You are either flashing an incompatible custom ROM or your boot loader is not unlocked.
Flash a stock FTF again, then goto the dialer and dial *#*#7378423#*#* then goto service info, configuration and post here what it says in the rooting status.
gregbradley said:
You are either flashing an incompatible custom ROM or your boot loader is not unlocked.
Flash a stock FTF again, then goto the dialer and dial *#*#7378423#*#* then goto service info, configuration and post here what it says in the rooting status.
Click to expand...
Click to collapse
Screenshot:
http://dl-1.va.us.xda-developers.com/3/6/5/9/4/7/7/Screenshot_2016-02-25-14-31-22.jpg?key=GrIQDs1awaejgcECU90NhA&ts=1456407354http://
ROM: http://forum.xda-developers.com/z3/development/d6603-23-1-1-28-t3102271
ROM2: http://forum.xda-developers.com/z3/development/rom-existenz-y-1-0-0-02-07-t3148877
PdorITA said:
Screenshot:
http://dl-1.va.us.xda-developers.com/3/6/5/9/4/7/7/Screenshot_2016-02-25-14-31-22.jpg?key=GrIQDs1awaejgcECU90NhA&ts=1456407354http://
ROM: http://forum.xda-developers.com/z3/development/d6603-23-1-1-28-t3102271
ROM2: http://forum.xda-developers.com/z3/development/rom-existenz-y-1-0-0-02-07-t3148877
Click to expand...
Click to collapse
Well, neither of those require an unlocked bootloader, but that should not make a difference.
What boot.img are you flashing, both of those ROMs require a stock kernel.
gregbradley said:
Well, neither of those require an unlocked bootloader, but that should not make a difference.
What boot.img are you flashing, both of those ROMs require a stock kernel.
Click to expand...
Click to collapse
at moment i have a 4.4.4 stock rooted http://dl-1.va.us.xda-developers.com/3/6/5/9/5/7/4/Screenshot_2016-02-25-15-46-09.jpg?key=4YW3-mNtbisUcXLWsSrQ_g&ts=1456411770
Which procedure i have to follow to flash a custom ROM?
i normally copy the rom zip on the external micro SD card
i go to teamwin recovery i do a wipe and after i do install
The install finish and i click on reboot
DO i have to do other steps to flash the stock kernel?
i didn't flash any boot.img and kernel until now
UPDATE
problem solved i flashed the stock 5.1.1 kernel before to flash the rom and the bootloop disappeared.
Now i'm with the custom Mod there is any possibility to restore the DRM functions with the custom rom?
PdorITA said:
at moment i have a 4.4.4 stock rooted http://dl-1.va.us.xda-developers.com/3/6/5/9/5/7/4/Screenshot_2016-02-25-15-46-09.jpg?key=4YW3-mNtbisUcXLWsSrQ_g&ts=1456411770
Which procedure i have to follow to flash a custom ROM?
i normally copy the rom zip on the external micro SD card
i go to teamwin recovery i do a wipe and after i do install
The install finish and i click on reboot
DO i have to do other steps to flash the stock kernel?
i didn't flash any boot.img and kernel until now
UPDATE
problem solved i flashed the stock 5.1.1 kernel before to flash the rom and the bootloop disappeared.
Now i'm with the custom Mod there is any possibility to restore the DRM functions with the custom rom?
Click to expand...
Click to collapse
Well, if you only want to stay on these stock based custom rooms there was no need to unlock the bootloader. You only need that for truly custom rooms like cm or aosp.
If you want these rooms with drm keys then do this.
Restore your T A backup. This will relocate your bootloader
If this results in a boot loop, then flash a stock ftf, and do everything again EXCEPT do not unlock the bootloader this time