Hello,
i have a TF700KL, and i want to flash it.
But i don't find Something about it. Only about TF700.
Can You Help me?
Warm regards
Please Guys, i want help... Please...
Thx for ignore me
TF700 & TF700KL same, KL is the last version and the one listed on Asus's Global Website. All files should work once you A) Update firmware to the latest version B) Unlock bootloader. - NP
I did update it to Version VF_V5.0.4.17 but still can't manage to make the unlock app to get installed.
hard resetted3 times also with no GMAIL account, but still nothing
please help me
Donnie87 said:
I did update it to Version VF_V5.0.4.17 but still can't manage to make the unlock app to get installed.
hard resetted3 times also with no GMAIL account, but still nothing
please help me
Click to expand...
Click to collapse
Took me a few minutes to find it and a few hoops to jump through to extract the archive, but the official apk is still out there. Try to install this:
https://www.androidfilehost.com/?fid=5862345805528055095
AMAZING I MANAGED!!! THANK YOU BROOOOOOOOOOOOOOOOOOOOOOOOOOOO
how can I now install a custom rom? I'd just like to have the original one but faster....
and of coruse no I don't want to lose the 4g support
---------- Post added at 02:42 PM ---------- Previous post was at 02:03 PM ----------
I tried to reboot but even if it's unlocked, I have no bootloader. it still remain with the screen normal version
Donnie87 said:
AMAZING I MANAGED!!! THANK YOU BROOOOOOOOOOOOOOOOOOOOOOOOOOOO
how can I now install a custom rom? I'd just like to have the original one but faster....
and of coruse no I don't want to lose the 4g support
---------- Post added at 02:42 PM ---------- Previous post was at 02:03 PM ----------
I tried to reboot but even if it's unlocked, I have no bootloader. it still remain with the screen normal version
Click to expand...
Click to collapse
You are welcome.
Rest assured you do have a bootloader. You may not have the bootloader interface the other Transformers have and possibly there is no way to get fastboot to work on this thing - I don't know.
There is no custom rom for this tablet, and if you do not want to loose 4G you cannot use one made for another Transformer either (no idea if that is even possible, I do not know the KL).
Your best bet is to gain root and uninstall a bunch of cr**, maybe use Greenify - I don't know. Very limited what you can do on stock....
I seem to recall that people got root with Framaroot on this thing. Google it, the info is out there. If I can find it so can you
berndblb said:
You are welcome.
Rest assured you do have a bootloader. You may not have the bootloader interface the other Transformers have and possibly there is no way to get fastboot to work on this thing - I don't know.
There is no custom rom for this tablet, and if you do not want to loose 4G you cannot use one made for another Transformer either (no idea if that is even possible, I do not know the KL).
Your best bet is to gain root and uninstall a bunch of cr**, maybe use Greenify - I don't know. Very limited what you can do on stock....
I seem to recall that people got root with Framaroot on this thing. Google it, the info is out there. If I can find it so can you
Click to expand...
Click to collapse
ok let me get to the keypoints here that made me ask for help, and so you'll see that i'm not just a lazy person that doesn't use google
1) Some people they say that the KL can accept all the roms of the Tf700T. for example katkiss is saying to use one of their roms
1.a) some say that it will brick the device.
so, first question here, what will happen if i'll get a custom rom of the TF700T?
2) some people say that I should have a version of the "unlock bootloder" after unlocking with the asus app.
Well I don't have anything, I just have a small phrase which is "device unlocked" and that's it. nothing else.
3) some say on google that there is a cyanogen mod for the KL. Unfortunately cyanogenmod wiki and forum are down, so I can't find either assistance, either the files.
nothing to do here, then.
4) let's say I'll follow your guide, and i'll flash a custom rom. will I lose the 4g?
4.a) how can I get to the old rom, even original, in order to get 4g back?
5) about root: i managed to root it a long time ago. Unfortunately, even disabling most of the package and all the bloatware, the device really sucks.
that's the main reason why I abandoned there 3 years ago. now it's full of dust, and as I've been working a lot, I wanted to get it back with basic functions, but without waiting 10 seconds from the moment i press on APPS BUTTON and the actual time for which I see the apps page.
so, here's my google searching experience.
Donnie87 said:
1) Some people they say that the KL can accept all the roms of the Tf700T. for example katkiss is saying to use one of their roms
1.a) some say that it will brick the device.
so, first question here, what will happen if i'll get a custom rom of the TF700T?
Click to expand...
Click to collapse
I'd say the first question is: Is there a compatible custom recovery for the KL and how to install it? I do not know that there ever was a custom recovery made for the KL and using one made for another Transformer may or may not brick your device. I do not see a single post from anyone stating that they successfully installed a custom rom or recovery on the KL, so my guess is: It cannot be done unless you develop a custom recovery for this tablet and find a way to flash it.
2) some people say that I should have a version of the "unlock bootloder" after unlocking with the asus app.
Well I don't have anything, I just have a small phrase which is "device unlocked" and that's it. nothing else.
Click to expand...
Click to collapse
Well, there's the first difference to other Transformers: Most of them have a bootloader menu from where you can boot into recovery or into Android and perform a data wipe. Booted into the bootloader you also have fastboot access. The KL does not seem to have any of this. Do you have fastboot working on your PC? Try it, boot with Vol down or Vol Up and then check if you have fastboot access to the tablet. I doubt it....
3) some say on google that there is a cyanogen mod for the KL. Unfortunately cyanogenmod wiki and forum are down, so I can't find either assistance, either the files.
nothing to do here, then.
Click to expand...
Click to collapse
I've only seen post users expressing hope or wishes for CM for the KL. I don't think there ever was a working CM rom for the KL
4) let's say I'll follow your guide, and i'll flash a custom rom. will I lose the 4g?
Click to expand...
Click to collapse
You cannot follow my guide unless you figure out a way to get fastboot working. You could try to flash TWRP recovery using their app or Flashify, but which TWRP?? Which version might be compatible with your bootloader? Nobody knows it seems. But heck! What have you got to loose? You are not going to use the tablet in its current state anyway, so if you brick it - who cares?
But to answer your question: Yes, you would definitely loose the 4G. The software for your modem has its own partition and no rom made for the wifi-only Transformers even knows this partition exists, let alone about the hardware
4.a) how can I get to the old rom, even original, in order to get 4g back?
Click to expand...
Click to collapse
Again: Untested territory. If you had a custom recovery or fastboot you might be able to flash the Asus firmware in either. Maybe
you won't believe me
I was away for 1 month
got back
installed framaroot
installed greenify
now it runs with like 10 apps total (including the keyboard)
tablet STILL UNUSABLE, takes 1 minutes to open youtube, 2 mins to open play store
Id really like to brick it rather than keep it like that
Well, there's the first difference to other Transformers: Most of them have a bootloader menu from where you can boot into recovery or into Android and perform a data wipe. Booted into the bootloader you also have fastboot access. The KL does not seem to have any of this. Do you have fastboot working on your PC? Try it, boot with Vol down or Vol Up and then check if you have fastboot access to the tablet. I doubt it....
Click to expand...
Click to collapse
tried but the max i get is the screen wghere
"press volume button to select
1) enter sd down mode
2) factory reset
3) exit update mode
press power button to enter"
so i then flashed with flashify, read after
berndblb said:
You cannot follow my guide unless you figure out a way to get fastboot working. You could try to flash TWRP recovery using their app or Flashify, but which TWRP?? Which version might be compatible with your bootloader? Nobody knows it seems. But heck! What have you got to loose? You are not going to use the tablet in its current state anyway, so if you brick it - who cares?
But to answer your question: Yes, you would definitely loose the 4G. The software for your modem has its own partition and no rom made for the wifi-only Transformers even knows this partition exists, let alone about the hardware
Click to expand...
Click to collapse
I then flashed the TWMR
when i rebooted it said
"no usb connected"
i then connected to the PC
and it say
"READY FOR DOWNLOAD" with an android picture
i can't boot it up again
what should i do now?
when i now do the FASTBOOT DEVICES command on pc, I see the serial of the asus
it's the first time fastboot sees it
I tried doing "fastboot update kitkatnougatellaxxxx.zip"
but it say that android-info.txt & android-product.txt not find so not flashable
what now, then? I can't even use it with the old OS
You need to boot into the TWRP that you flashed, hold the volume button down and press the power button (hold both) until you get the fastboot screen, the square with [RCK] should be blinking. Now press the volume up button to enter the TWRP recovery console. - NP
Nektopoli said:
You need to boot into the TWRP that you flashed, hold the volume button down and press the power button (hold both) until you get the fastboot screen,
Click to expand...
Click to collapse
this is what i get when i press the button normal boot button
this is what i get when i press the volum down + boot button
I just did flashifty with the latest TMWR recovery for TF700T
help pliz
best bet would be to do a factory reset, I don't believe this rom will work on the KL model. - NP
it doesn't even allow the factory reset, as if i press it it gives the NO USB CONNECTED screen
i'd say it's bricked
Donnie87 said:
it doesn't even allow the factory reset, as if i press it it gives the NO USB CONNECTED screen
i'd say it's bricked
Click to expand...
Click to collapse
Try selecting [1] "Enter SD down mode" which is Enter SD download mode and see if you get to the next menu. - NP
I can't
I mean it doesn't get to the next menu
I've been trying to find the threads on how to re-flash the stock ASUS ROM from the SD cardseeing this is the only way to get the TF700k working but I can't find it know. It involved have the ROM in the root directory on the SDcard and giving it a specific name, this name triggers the tablet to update itself. - NP
Related
Hi
I made a very stupid mistake
I used the tool to root my xoom wifi model
I used the tool in this thread
http://forum.xda-developers.com/showthread.php?t=1011196
I tried to post this issue in the thread but I did not have the permissions.
by mistake I used the root of the 3G model
I followed the steps and everything was ok
I tried the unroot and here is the deadly (hopefully not) mistake
the xoom stops and first screen and refuses to boot
Did I brick my device??
Is there a way to resolve this problem??
Thanks
Yes, you have bricked it. Fastboot won't work at this point, so your only option is probably to return it.
-Jim (who's on his 2nd xoom)
Sent from my Xoom using Tapatalk
nawialkair said:
Hi
I made a very stupid mistake
I used the tool to root my xoom wifi model
I used the tool in this thread
http://forum.xda-developers.com/showthread.php?t=1011196
I tried to post this issue in the thread but I did not have the permissions.
by mistake I used the root of the 3G model
I followed the steps and everything was ok
I tried the unroot and here is the deadly (hopefully not) mistake
the xoom stops and first screen and refuses to boot
Did I brick my device??
Is there a way to resolve this problem??
Thanks
Click to expand...
Click to collapse
what does the first screen say? failed boot image?
BeagleBoy said:
Yes, you have bricked it. Fastboot won't work at this point, so your only option is probably to return it.
-Jim (who's on his 2nd xoom)
Sent from my Xoom using Tapatalk
Click to expand...
Click to collapse
That's the thing I did not want to hear but expected it.
============================================
znfrazier said:
what does the first screen say? failed boot image?
Click to expand...
Click to collapse
No
I am stuck at the motorola logo and the word dual core technology
When I press Volume up or down (fanrkly I could not get into that menu again) I get a list
it includes the following:
Fast Boot
If I choose it I get
Starting Fastboot protocol support
nawialkair said:
That's the thing I did not want to hear but expected it.
============================================
No
I am stuck at the motorola logo and the word dual core technology
When I press Volume up or down (fanrkly I could not get into that menu again) I get a list
it includes the following:
Fast Boot
If I choose it I get
Starting Fastboot protocol support
Click to expand...
Click to collapse
Can you see the xoom in /fastboot devices? See if you can access you xoom from the computer. I actually did the same thing and got mine in working order.
nawialkair said:
That's the thing I did not want to hear but expected it.
============================================
No
I am stuck at the motorola logo and the word dual core technology
When I press Volume up or down (fanrkly I could not get into that menu again) I get a list
it includes the following:
Fast Boot
If I choose it I get
Starting Fastboot protocol support
Click to expand...
Click to collapse
Try doing this real quick, the best that can happen is that you can turn this around. You may NOT in fact be bricked. I made the mistake of doing this also, but I figured it is just like when I was using the Danger SPL on the G1 and I had to at least find a way.
So, do this real quick if you know how.
1. Power on and press Vol - at the same time
2. Open a command prompt to your ADB file and type in fastboot oem unlock
3. If this lets you in (it may not) go through the regular procedure of pressing Vol -+-+
4. It will format and you should know if it is in fact bricked or not because it won't boot up.
5. ******
6. Profit???
Let us know how it goes.
znfrazier said:
Can you see the xoom in /fastboot devices? See if you can access you xoom from the computer. I actually did the same thing and got mine in working order.
Click to expand...
Click to collapse
Yes I can see it
Thank you
stevenege said:
Try doing this real quick, the best that can happen is that you can turn this around. You may NOT in fact be bricked. I made the mistake of doing this also, but I figured it is just like when I was using the Danger SPL on the G1 and I had to at least find a way.
So, do this real quick if you know how.
1. Power on and press Vol - at the same time
2. Open a command prompt to your ADB file and type in fastboot oem unlock
3. If this lets you in (it may not) go through the regular procedure of pressing Vol -+-+
4. It will format and you should know if it is in fact bricked or not because it won't boot up.
5. ******
6. Profit???
Let us know how it goes.
Click to expand...
Click to collapse
I did that
and it started the format
After the boot, it stopped at the same place
Motorola's Logo and Dual Core
What's next??
thanks
root using the instructions in this thread it should fix your problem
http://forum.xda-developers.com/showthread.php?t=1010568
nawialkair said:
Yes I can see it
Thank you
I did that
and it started the format
After the boot, it stopped at the same place
Motorola's Logo and Dual Core
What's next??
thanks
Click to expand...
Click to collapse
you should try flashing the boot.img used to root i believe its tiamat 1.1.6 and the system.img for wifi. i have the stock system.img if you need it. hopefully that would git ya to boot atleast. MAKE SURE THAT IT IS WIFI ONLY.
Go here and follow the second post I posted. This will help you do this without downloading the files because they are already there.
Give it a shot at least
stevenege said:
Go here and follow the second post I posted. This will help you do this without downloading the files because they are already there.
Give it a shot at least
Click to expand...
Click to collapse
did they fix the boot prob with the one click? i haven't tried it.
znfrazier said:
did they fix the boot prob with the one click? i haven't tried it.
Click to expand...
Click to collapse
Yes, it has all been fixed. There still seems to be an issue with SU rights until you download BusyBox and no clue why.
I have been testing the WiFi one constantly and have not had any major hickups.
stevenege said:
Yes, it has all been fixed. There still seems to be an issue with SU rights until you download BusyBox and no clue why.
I have been testing the WiFi one constantly and have not had any major hickups.
Click to expand...
Click to collapse
good good. ill have to check it out. i still need to try out the pimp my xoom. ill post over there haha. gotta stay on topic.
Thanks ALL
I flashed Tiamat 1.1.6 boot.img
the problem is that when using this command:
adb remount
I get
error: device not found
The xoom is defined in the device manager as
Android adb Interface
nawialkair said:
Thanks ALL
I flashed Tiamat 1.1.6 boot.img
the problem is that when using this command:
adb remount
I get
error: device not found
The xoom is defined in the device manager as
Android adb Interface
Click to expand...
Click to collapse
Sounds like you are probably bricked :-/
Can I get the stock boot image
I just want to try that last option
I flashed the stock img and system img
It works fine
Yaaaaa
Thanks very much
Thanks very much
nawialkair said:
I flashed the stock img and system img
It works fine
Yaaaaa
Thanks very much
Thanks very much
Click to expand...
Click to collapse
Told ya haha, save those files on your computer for next time. I keep them in close reach just incase something happens. if you have any other problems give me a holla. glad everything is working again.
I think I'm more screwed than OP because I was already unlocked and rooted. Then locked my wifi xoom with the 3g one click tool. Yes I know that was very stupid but I was wondering what are my options?
Take it back to Amazon?
Use the following method in this thread?
Wait for SBF?
Thank you your time and sorry if I hijacked this thread.
jarretf said:
I think I'm more screwed than OP because I was already unlocked and rooted. Then locked my wifi xoom with the 3g one click tool. Yes I know that was very stupid but I was wondering what are my options?
Take it back to Amazon?
Use the following method in this thread?
Wait for SBF?
Thank you your time and sorry if I hijacked this thread.
Click to expand...
Click to collapse
It relocked? Yikes... I don't trust those 1-click things. I need to know what's going on step by step. My first Xoom got bricked when I thought I had untainted OEM image files and relocked it. There's really no reason to relock a Wifi Xoom right now.
Anyway, if it relocked, you might have been in the same boat I was where the computer wouldn't recognize the Xoom in Fastboot mode or RSD mode. And I went and got it exchanged at that point.
Oh, if RSD Lite can't see your Xoom in RSD mode, you might be out of luck. SBF won't help if RSD Lite can't see your Xoom. BUT, if it does see it, it sounds like you can flash the 3G/4G SBF from Motorola/Verizon and to get sorta running, then use Fastboot to overwrite the boot and system partitions.
Here's some background: After installing JB on my (sorta) new TF300, it hit me: I hadn't rooted it yet! I head over into this thread, which says that the methods provided work for all firmware versions. I have a recent version of fastboot directly from the Android SDK, re-downloaded the recovery.img to ensure that it wasn't corrupt, copy-pasted the commands, checked them twice, and the recovery still won't load properly.
Here's the issue: When I attempt to load recovery, the tablet says something along the lines of "loading recovery kernel", and hangs on that screen for as long as I've left it. So, here comes the question: Is this an issue with CWM that is to be addressed, or do I just have really bad luck?
Edit: Forgot to also ask, am I just an idiot?
badfontkeming said:
Here's some background: After installing JB on my (sorta) new TF300, it hit me: I hadn't rooted it yet! I head over into this thread, which says that the methods provided work for all firmware versions. I have a recent version of fastboot directly from the Android SDK, re-downloaded the recovery.img to ensure that it wasn't corrupt, copy-pasted the commands, checked them twice, and the recovery still won't load properly.
Here's the issue: When I attempt to load recovery, the tablet says something along the lines of "loading recovery kernel", and hangs on that screen for as long as I've left it. So, here comes the question: Is this an issue with CWM that is to be addressed, or do I just have really bad luck?
Click to expand...
Click to collapse
I have the same issue, no fix yet.
untermensch said:
I have the same issue, no fix yet.
Click to expand...
Click to collapse
Thanks for the quick reply.
Fortunately since it's just the recovery, Android itself is fine, so I'll just wait it out and hope for a fix soon.
I have the exact same problem so I right there with ya
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
I wouldn't recommend reflashing CWM -- that was the last thing I did prior to it bricking. I'm stuck at the initial Asus logo, no fastboot, and all I have is APX.
badfontkeming said:
Thanks for the quick reply.
Fortunately since it's just the recovery, Android itself is fine, so I'll just wait it out and hope for a fix soon.
Click to expand...
Click to collapse
You could try flashing the recovery from the terminal instead of fastboot.
Make sure you have the correct recovery image, and put it somewhere easy to remember (preferably on the root of your SD card).
Open Terminal Emulator on your tablet, and type (this assumes that recovery.blob is on your SD card root):
Code:
su
dd if=/sdcard/recovery.blob of=/dev/block/mmcblk0p4
This should get you a working recovery. If CWM still doesn't work, I recommend TWRP. It's much more reliable and easier to use, imo.
EndlessDissent said:
You could try flashing the recovery from the terminal instead of fastboot.
Make sure you have the correct recovery image, and put it somewhere easy to remember (preferably on the root of your SD card).
Open Terminal Emulator on your tablet, and type (this assumes that recovery.blob is on your SD card root):
Code:
su
dd if=/sdcard/recovery.blob of=/dev/block/mmcblk0p4
This should get you a working recovery. If CWM still doesn't work, I recommend TWRP. It's much more reliable and easier to use, imo.
Click to expand...
Click to collapse
I've noticed the same issue, it exists with the latest TWRP flashed via fastboot as well.
The problem with flashing via the terminal is that we don't have root yet, and need a recovery to get it. Looks like the only option is to wait for a fix.
EndlessDissent said:
You could try flashing the recovery from the terminal instead of fastboot.
Make sure you have the correct recovery image, and put it somewhere easy to remember (preferably on the root of your SD card).
Open Terminal Emulator on your tablet, and type (this assumes that recovery.blob is on your SD card root):
Code:
su
dd if=/sdcard/recovery.blob of=/dev/block/mmcblk0p4
This should get you a working recovery. If CWM still doesn't work, I recommend TWRP. It's much more reliable and easier to use, imo.
Click to expand...
Click to collapse
Yeah... the issue is, the reason I'm trying to flash CWM is so I can get root.
krhainos said:
I wouldn't recommend reflashing CWM -- that was the last thing I did prior to it bricking. I'm stuck at the initial Asus logo, no fastboot, and all I have is APX.
Click to expand...
Click to collapse
Same for me... is there anything I can do at this time to unbrick it or do I have to send it for RMA?
sparky28000 said:
Same for me... is there anything I can do at this time to unbrick it or do I have to send it for RMA?
Click to expand...
Click to collapse
Asus' official stance is, you unlocked the bootloader and since you ruined the tablet due to this -- they won't help you.
However, there's an official Asus representative and I'm going to reach out to him since flashing a recovery is a fairly innocuous thing to do. And there's at least two people now that have unbootable units.
You can try contacting Gary Key or Asus_USA, to see if they can help -- I sent them a PM about my/our situation
Gary Key : http://forum.xda-developers.com/member.php?u=4025695
Asus_USA : http://forum.xda-developers.com/member.php?u=4029265
krhainos said:
Asus' official stance is, you unlocked the bootloader and since you ruined the tablet due to this -- they won't help you.
However, there's an official Asus representative and I'm going to reach out to him since flashing a recovery is a fairly innocuous thing to do. And there's at least two people now that have unbootable units.
You can try contacting Gary Key or Asus_USA, to see if they can help -- I sent them a PM about my/our situation
Gary Key : http://forum.xda-developers.com/member.php?u=4025695
Asus_USA : http://forum.xda-developers.com/member.php?u=4029265
Click to expand...
Click to collapse
Now there is atleast 3 people since I bricked mine also
krhainos said:
I wouldn't recommend reflashing CWM -- that was the last thing I did prior to it bricking. I'm stuck at the initial Asus logo, no fastboot, and all I have is APX.
Click to expand...
Click to collapse
just curious how are you able to get in APX mode it seems I cant even do that
Drgravy said:
just curious how are you able to get in APX mode it seems I cant even do that
Click to expand...
Click to collapse
If attach via USB then power the device on while holding down VOL+ (instead of VOL-), you'll notice a new device show up as "Unknown Device\APX" in Windows or "Nvidia Corp." under lsusb in Linux. The display will not light up.
The APX interface is used with nvflash. From what I can understand, you need to have backed up several key pieces of information beforehand to be able to use APX on your own. I'm hoping Asus can whip something up that'll let us recover our devices via APX (or some other method unknown to us), otherwise we have some very expensive tea trays.
krhainos said:
If attach via USB then power the device on while holding down VOL+ (instead of VOL-), you'll notice a new device show up as "Unknown Device\APX" in Windows or "Nvidia Corp." under lsusb in Linux. The display will not light up.
The APX interface is used with nvflash. From what I can understand, you need to have backed up several key pieces of information beforehand to be able to use APX on your own. I'm hoping Asus can whip something up that'll let us recover our devices via APX (or some other method unknown to us), otherwise we have some very expensive tea trays.
Click to expand...
Click to collapse
yeah Ive tried all of that several times I cant even shut my tab down I just get the asus boot logo untill the battery dies
Ive tried holding those buttons the screen goes blank for about 2 seconds then the logo comes back
Im guessing mine might be a lost cause
Thats what i get for being so impatient
Drgravy said:
yeah Ive tried all of that several times I cant even shut my tab down I just get the asus boot logo untill the battery dies
Ive tried holding those buttons the screen goes blank for about 2 seconds then the logo comes back
Im guessing mine might be a lost cause
Thats what i get for being so impatient
Click to expand...
Click to collapse
I used the reset hole in place of the power button when fiddling with button combinations. Hold down VOL+, and poke the reset hole with a paperclip and that'll get you in APX mode -- not like it does any of us any good.
I thought I had bricked mine...
as well,
Holding down the power/volume down for about 15 seconds caused a normal boot.
Give it a try.
Jim
I managed to get ClockWorkMod to work by swapping the kernel with the one in the from the Jelly Bean SOS partition.
I remembered that there was a firmware update applied to the camera a figured it was causing a kernel panic.
so this is a temporary situation. I have attached my test file.
>>>>>DO NOT FLASH UNLESS YOU UNDERSTAND THE RISK<<<<<
no other instruction will be given on how to flash, this is to prevent noob bricks.
jdeatsch said:
as well,
Holding down the power/volume down for about 15 seconds caused a normal boot.
Give it a try.
Jim
Click to expand...
Click to collapse
Not working for me at all...
untermensch said:
I managed to get ClockWorkMod to work by swapping the kernel with the one in the from the Jelly Bean SOS partition.
I remembered that there was a firmware update applied to the camera a figured it was causing a kernel panic.
so this is a temporary situation. I have attached my test file.
>>>>>DO NOT FLASH UNLESS YOU UNDERSTAND THE RISK<<<<<
no other instruction will be given on how to flash, this is to prevent noob bricks.
Click to expand...
Click to collapse
So, basically, the kernels in the recoveries just need to be updated, and all recoveries will work? I think we should have proper working CWM and TWRP shortly if that's the case.
Also, can you clarify what this "test file" or "test blob" actually is? From the majority of your post, I assume it's a modified CWM recovery, but that is never explicitly stated. Would be good to know exactly what I'm flashing. Not that I don't trust you -- if Cyanogen himself gave me a zip called "test" without telling me what it did, I would hesitate to flash it. I can't open a blob file to inspect it like a zip, so it's even more important in this case.
Sorry if the previous paragraph was kind of nitpickey. I do appreciate you doing this for everyone, and I'm sure others appreciate it just as much. Just saying, "better safe than sorry", you know?
---------- Post added at 10:46 PM ---------- Previous post was at 10:40 PM ----------
EndlessDissent said:
So, basically, the kernels in the recoveries just need to be updated, and all recoveries will work? I think we should have proper working CWM and TWRP shortly if that's the case.
Also, can you clarify what this "test file" or "test blob" actually is? From the majority of your post, I assume it's a modified CWM recovery, but that is never explicitly stated. Would be good to know exactly what I'm flashing. Not that I don't trust you -- if Cyanogen himself gave me a zip called "test" without telling me what it did, I would hesitate to flash it. I can't open a blob file to inspect it like a zip, so it's even more important in this case.
Sorry if the previous paragraph was kind of nitpickey. I do appreciate you doing this for everyone, and I'm sure others appreciate it just as much. Just saying, "better safe than sorry", you know?
Click to expand...
Click to collapse
Weird. When I try to edit this post, I only get 3/4 of the quote and none of my actual post to edit. Anyway...
Just wanted to clarify: not asking for directions. If the file is what I think it is, I know what I'm doing. I just want to know that the file is what I think it is.
It is the Jelly Bean recovery kernel and the ClockWorkMod ramdisk repacked with mkbootimg, then blobpack,
then I added the "-SIGNED-BY-SIGNBLOB-" header with a hex editor. it seems like ADB does not work but I
was able to root with an update.zip
I installed this with fastboot and erased and re-flashed 4 time's before posting to make sure
it would not cause instant brick.
EndlessDissent said:
So, basically, the kernels in the recoveries just need to be updated, and all recoveries will work? I think we should have proper working CWM and TWRP shortly if that's the case.
Also, can you clarify what this "test file" or "test blob" actually is? From the majority of your post, I assume it's a modified CWM recovery, but that is never explicitly stated. Would be good to know exactly what I'm flashing. Not that I don't trust you -- if Cyanogen himself gave me a zip called "test" without telling me what it did, I would hesitate to flash it. I can't open a blob file to inspect it like a zip, so it's even more important in this case.
Sorry if the previous paragraph was kind of nitpickey. I do appreciate you doing this for everyone, and I'm sure others appreciate it just as much. Just saying, "better safe than sorry", you know?
Click to expand...
Click to collapse
So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it
allusion said:
So i'm looking for a little help.
A little while back I used this thread : [GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
To help me install this custom rom : [ROM][TF300]|Mar 28| Energy™ -.¸¸.·´¯ Official JB 4.2.1 Stock or Themed ¯´·.¸¸. -
onto my girlfriends TF300T tablet
and I have this : [RECOVERY][TF300T/TG] TWRP 2.5.0.0 Touch Recovery! [2013-4-9] on there as well
but I can't remember if this was part of the unlock/root/flash process or not, so i'm not sure if it used it during the process or if I added it shortly afterword
now its been while since I have done it but then the tablet started to restart randomly while she was using it.
so I figured no biggie maybe an app got messed up or something, and so I told her to back up her pics, exc she wanted off the unit
and I could look at reinstalling the apps or just taking the unit back to factory rom
about a week later it started to reboot more often randomly
and now it is to the point where it will not make it into the rom
now I can make it into the boot selection where I can choose RCK (for the TWRP), USB, or the other 2 options
and I know I can make it into the TWRP tool as well and it does not repeatedly boot from there, so i'm sure its a rom issue and not a hardware issue, but I could still be wrong
the unit is currently charging so I have not had a chance to try for the usb connection option or anything else yet
hopefully the usb option will work so I can try to recover the pics, exc before taking the unit back to factory
now in the process I know I have unlocked the unit, I believe I have done the min root but have not fully rooted the unit if that makes sense
so i'm just wondering if I will half to fully root (and how do I do that if I do since I can't make it into a rom)
how do I clear the rom that has gone bad
how do I install a factory rom (how do I tell which is the lastest rom, and which one is needed for my unit)
and then I should be good from there
if you need any more info please let me know and maybe some instructions on how to get to that info
in the process of putting the energy rom onto it, I spent a week of reading, researching, and figuring out which way would probably be the safest for me to do, plus the easiest for me to understand
now that it has been so long I have been reading and researching again, I just need that nudge that gets me in the right direction
i'm sure i'm not the only one that has had this issue with a rom, and i'm also sure there is a guide out there already that goes over how to put it back to a factory rom
just for some reason i'm either over looking it or not finding it
Click to expand...
Click to collapse
Its very simple to return to stock. But first, do you have the tablets drivers installed on your pc?
---------- Post added at 06:16 AM ---------- Previous post was at 06:14 AM ----------
And do you have fastboot?
if you are talking about the android sdk tools
yes that is installed on my computer from the first time I did the tablet
and I went ahead and did the updates for it as well
and tried plugging the unit in with the fastboot and confirm it shows up in device manager
bump
hope you didn't forget about me crazynitro
allusion said:
bump
hope you didn't forget about me crazynitro
Click to expand...
Click to collapse
sorry, i got caught up with some school work. i could walk you through the process, if you want.
if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated
allusion said:
if you could please, any links, post, exc you want me to read ahead of time please post
anything you need me to verify or check on please let me know
gf starting to be up my butt about her tablet, lol
but yes any help is more then appreciated
Click to expand...
Click to collapse
Lol okay. Theres actually a more simple way.
1. Download the latest asus firmware.
2. Extract the zip file
3. Flash it like a normal rom.
If you cant use this method then you'll have to use fastboot. Here's a link but if you need any help, just ask : http://www.androidauthority.com/transformer-pad-tf300t-restore-stock-firmware-108016/
how do I check the sku according to that guide if i'm not able to load into the android os
that only shows if you can load into the os
would the box have that?
or now looking at the options that I should assume its is a US sku lol
crazynitro said:
3. Flash it like a normal rom.
Click to expand...
Click to collapse
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.
crazynitro said:
Its simple lol. When you download the firmware from asus, its usually in a .zip form. In it, there is another zip file. Copy that zip file onto your tablet and flash it with twrp.
Click to expand...
Click to collapse
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit
allusion said:
what about having to clear anything? I could of swore the instructions showed going to 2 or 3 spots for clearing data or info or something from the unit
Click to expand...
Click to collapse
Yes. You have to do a factory reset first.
and how do I do that lol, and what happens when I don't do that first
is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying
allusion said:
lol, and how do I do that using the twrp?
can't find any detailed instructions on using twrp on flashing a rom, especially the stock one
i'm sure there is a set of detailed instructions cause I swore I saw one once
but i'm not able to find it again
cause I thought besides using the install part there were things I had to clear as well for it to work
oh and yeah the download link for fastboot is no long working in the one guide you gave me to follow so not sure if I already have what it is talking about
Click to expand...
Click to collapse
If you want to use twrp, download the us stock firm ware. when you open it, you'll see a file that looks like this: "US_epad-user-10.6.1.15.3". copy that file onto your tablet and flash it like a normal rom. haha
For fastboot, if you have the android sdk, then you already have fastboot so you dont have to download fastboot again.
---------- Post added at 03:36 PM ---------- Previous post was at 03:32 PM ----------
allusion said:
is this tablet now dead since the step of doing the reset was not complete? cause now I can not access twrp and it just sits there with the asus logo and the swirling dots
when I try to access the usb option all I have is rck, android and wipe, rck just gives a failure shortly after trying
Click to expand...
Click to collapse
if you tried installing the newest firmware, you wont see the usb icon when you press power and volume+ it automatically enters fastboot. you dont have to select anything
---------- Post added at 03:39 PM ---------- Previous post was at 03:36 PM ----------
allusion said:
and how do I do that lol, and what happens when I don't do that first
Click to expand...
Click to collapse
if you cant enter twrp, then you dont have to worry about the factory reset you can flash the stock rom using fastboot.
Is it possible to root one plus one, without deleting any data and apps from it? I just want root access but don't want any custom rom.
yes, of course..
root doesn't delete any of your data
senaferdy79 said:
yes, of course..
root doesn't delete any of your data
Click to expand...
Click to collapse
Thanks for that. How can I do that?
#newtorooting
senaferdy79 said:
yes, of course..
root doesn't delete any of your data
Click to expand...
Click to collapse
That isn't technically true. In order to get root you must have a custom recovery installed. In order to install a custom recovery you must unlock the bootloader. Unlocking the bootloader wipes the device.
---------- Post added at 08:13 PM ---------- Previous post was at 08:10 PM ----------
sourabhkejriwal said:
Thanks for that. How can I do that?
#newtorooting
Click to expand...
Click to collapse
Sorry you got your hopes up, but the other poster isn't right. As per my reply to him you need to unlock your bootloader first, which is going to wipe your device. I'd suggest backing up any files that you have that are important to you. As for your apps and settings, you'll have to set them up again afterwards. Go to my guide thread here:
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
You need to follow (in order) sections 1, 2, 3, and 4. This will give you root access on your stock ROM. You should also follow section 10, it's very important that you make a backup of your EFS partition.
timmaaa said:
That isn't technically true. In order to get root you must have a custom recovery installed. In order to install a custom recovery you must unlock the bootloader. Unlocking the bootloader wipes the device.[
Click to expand...
Click to collapse
So are you saying all the many how to's that tell you that you can skip installing recover are wrong? Apparently, I don't have enough posts yet to create a link but I've seen posts here on XDA that say other wise and the one I have in front of me at the moment is from ibtimes . com titled "how-root-oneplus-one-install-twrp-recovery-1450708"
Their "Step-7" reads
Step-7: If you want to root the phone without installing TWRP recovery, type the following command
fastboot boot twrp.img
Click to expand...
Click to collapse
I guess the real question being, why would you need a custom recovery?
pdhx said:
So are you saying all the many how to's that tell you that you can skip installing recover are wrong? Apparently, I don't have enough posts yet to create a link but I've seen posts here on XDA that say other wise and the one I have in front of me at the moment is from ibtimes . com titled "how-root-oneplus-one-install-twrp-recovery-1450708"
Their "Step-7" reads
I guess the real question being, why would you need a custom recovery?
Click to expand...
Click to collapse
You're looking at outdated information. They used to be correct, but now they are wrong. This is because you can no longer use the fastboot boot recovery.img command with a locked bootloader. In fact, that functionality was removed quite some time ago.
You need a custom recovery because that's how you flash SuperSU to get root. There's no way around it.
Transmitted via Bacon
The default recovery will only flash cm signed zip, which is another reason for needing a custom recovery. That method you mention at ibtimes meant that it would allow you to, for one boot cycle, do a "live boot" of twrp
Sent From Lollipopified Bacon Goodness!
But how is anything going to be written to the system partition if it is locked ?
timmaaa said:
You're looking at outdated information. They used to be correct, but now they are wrong. This is because you can no longer use the fastboot boot recovery.img command with a locked bootloader. In fact, that functionality was removed quite some time ago.
You need a custom recovery because that's how you flash SuperSU to get root. There's no way around it.
Click to expand...
Click to collapse
Ugh, was afraid of that, you might want to add a comment to that effect to your guide....
Would have been nice to just add a setting to the default recovery to allow you to toggle whether you need a signed zip or not. Sucks that I could root my SGS III (which is far less hacker friendly than the One) without wiping it but I can't do that for the One, all i want is root for the moment. However, after playing around some more I'm getting stick before I even get that far; I can get ADB to find the device but when I adb reboot bootloader I cannot get fastboot to find the device. I've tried multiple drivers, different USB ports. When my One goes into fastboot the screen seems awfully dim, almost like it hasn't completely initialized, is that normal? And if so, any suggestions on why I can get adb to work but not fastboot?
pdhx said:
Ugh, was afraid of that, you might want to add a comment to that effect to your guide....
Would have been nice to just add a setting to the default recovery to allow you to toggle whether you need a signed zip or not. Sucks that I could root my SGS III (which is far less hacker friendly than the One) without wiping it but I can't do that for the One, all i want is root for the moment. However, after playing around some more I'm getting stick before I even get that far; I can get ADB to find the device but when I adb reboot bootloader I cannot get fastboot to find the device. I've tried multiple drivers, different USB ports. When my One goes into fastboot the screen seems awfully dim, almost like it hasn't completely initialized, is that normal? And if so, any suggestions on why I can get adb to work but not fastboot?
Click to expand...
Click to collapse
The one's bootloader is not like a nexus one where you can at least reboot recovery etc, once it boots thats it
what do get when you type fastboot devices ?
bombadier said:
The one's bootloader is not like a nexus one where you can at least reboot recovery etc, once it boots thats it
Click to expand...
Click to collapse
Which seems to be somewhat limiting for such an otherwise developer friendly device?
bombadier said:
what do get when you type fastboot devices ?
Click to expand...
Click to collapse
Nada, nothing, nil. however, "adb devices" works fine... WTF?
pdhx said:
Which seems to be somewhat limiting for such an otherwise developer friendly device?
Nada, nothing, nil. however, "adb devices" works fine... WTF?
Click to expand...
Click to collapse
Point one was just to say there is not anything really you can do in the bootloader, being able to reboot to recovery etc is actually a handy feature
Try a different fastboot.exe ? if you say that adb works perfectly then there has to be something wrong with your fastboot binary
I have attached my one,download and change the name back to .exe and see what happens
Going to need more info in order to help
bombadier said:
Point one was just to say there is not anything really you can do in the bootloader, being able to reboot to recovery etc is actually a handy feature
Try a different fastboot.exe ? if you say that adb works perfectly then there has to be something wrong with your fastboot binary
I have attached my one,download and change the name back to .exe and see what happens
Going to need more info in order to help
Click to expand...
Click to collapse
Fair point about bootloader, what I don't get is why they forced you to have to do the unlock to root? All I started out wanting to do was install Titanium and run a Nandroid or two. Guess if I'm going to have to wipe I guess I may end up installing a Lollipop ROM. However, I still can't get there. The fast boot you supplied gives the same problem. I was running the latest fastboot from the Android SDK and your's appears to be the same (though I haven't done a binary compare). As far as I can tell that leaves the device drivers, the laptop, or the phone itself. I'm running Win 7 SP 1 64 bit and I've tried various drivers including the Samsung the Google generic and they make no difference. Not sure how they would since adb works but I've seen some suggestions that drivers can be finicky in this regard.
What else can I tell you that might help?
Seems since I can get into the recovery that comes with the phone I could maybe get a works around somehow?
pdhx said:
Fair point about bootloader, what I don't get is why they forced you to have to do the unlock to root? All I started out wanting to do was install Titanium and run a Nandroid or two. Guess if I'm going to have to wipe I guess I may end up installing a Lollipop ROM. However, I still can't get there. The fast boot you supplied gives the same problem. I was running the latest fastboot from the Android SDK and your's appears to be the same (though I haven't done a binary compare). As far as I can tell that leaves the device drivers, the laptop, or the phone itself. I'm running Win 7 SP 1 64 bit and I've tried various drivers including the Samsung the Google generic and they make no difference. Not sure how they would since adb works but I've seen some suggestions that drivers can be finicky in this regard.
What else can I tell you that might help?
Seems since I can get into the recovery that comes with the phone I could maybe get a works around somehow?
Click to expand...
Click to collapse
They're "forcing" you to unlock the bootloader in order to root the device because that's the universally accepted standard (unlock bootloader, install custom recovery, flash root). Some devices have super secure bootloaders and that's why you end up needing to use hacks to get those devices rooted, but that isn't the normal way to go about it. Anyway, there's no advantage to leaving the bootloader at all. There's also no disadvantage to unlocking the bootloader at all. You might say that the fact that the device is wiped during the unlocking process is a disadvantage, but that fact is very well documented both here, on the OnePlus forums, and pretty much any other reputable tech site that mentions unlocking the bootloader on this phone. The point to that last sentence? It pays to research a device thoroughly before buying it, or before using it, the wiping of the device is no issue at all if you do it when you receive the phone (prior to using it), like many people have. But in your situation you're just going to have to backup any important media from the phone prior to unlocking.
Anyway, on to your fastboot issue. Exactly which drivers do you have installed on your PC? Do you have any other phone drivers or software installed on the PC? And do you have access to another PC in case the one you're using is the source of the issue?
Got it, 27th try (give or take) is the charm.... Had to use USBdeview and uninstall the Google and the Qualcomm drivers. Reinstalled the Google drivers (after a reboot) and got it to work. Guess I could have figured that out from dev manager by watching what drivers got activated while fastboot was active but nothing ever jumped out at me as an obvious culprit.
Interesting to note that TWRP now automatically prompts you to install SuperSU if you reboot after installing it. Maybe it found the zip but either way, nice touch!
Now to go and decide what ROM to install....
Thanks for your help!
I would suggest temasek unofficial cm12 ROM. Been using it pretty much as a daily driver since version 1.something of the ROM and no problems. At this point it's been almost a month of not having to boot into my cm11s ROM lol. I use it with AK kernel, seems like a good match cuz both devs are working together looks like. Flash AK ukm special edition after flashing his kernel and install synapse from play store if you want to play around with settings of the kernel
Sent From Lollipopified Bacon Goodness!
zenix23456 said:
I have been using AnyRooter for months and it is quite good to root OnePlus phones.
Click to expand...
Click to collapse
Except the Oneplus One.
I have my old Nvidia shield tablet and i have WiFi off and powered off.
I've been reading you can stop the kill switch from i guess changing the boot loader or operating system?
I new to this stuff.
Could someone just give me some directions on how to go threw this process please.
I don't know if it's to late cause i have the most recent update? but like i said it's turned off and WiFi is off and i heard that the kill switch is sent over the internet to your device and you don't have to confirm it.
So i hope my system is safe until i can do what ever you guys advise me to do.
Thank you...
treat your old tablet before connecting the new one to internet
Hello. You have to delete a folder (/system/apps/TegraOTA if you are on last firmware, with OTA 3.1) but to do this, you need root as folders in /system are not visible for the normal (unrooted) user. Or you flash a custom firmware, and flash nomoreOTA.zip that you'll find in the same forum : http://forum.xda-developers.com/shield-tablet/general/kill-kill-switch-shield-tablet-xx-t3179489
Be sure to act before you use your new tablet, and ideally do the same to the new one before connecting it to internet. Then the kill switch maybe will not even be sent to you/your old tablet.
:fingers-crossed:
edit : do a search here for 'root shield tablet lollipop' if you need info to get root or flash custom recovery : http://forum.xda-developers.com/shi...t-root-nvidia-shield-tablet-lollipop-t2972316
Note also that if you choose to (and succeed to) flash another (custom) ROM, such as Blisspop, you'll be safe as those custom roms avoid the kill switch (no /system/apps/TegraOTA folder in them)
If your new tablet is never activated then in theory the killswitch should never be sent out. So as far as I can see flashing a custom rom on the new device before letting it boot into android or connect to the internet should prevent device from showing as having been activated.
Also blocking Nvidia's OTA servers on the network level (you'll need custom firmware on your router) should do the trick as well.
Block all of these:
Code:
23.32.163.186
e886.g.akamaiedge.net
ota.nvidia.com.edgekey.net
ota.nvidia.com
Also it might be worth looking into whether flashing nomoreOTA.zip on the new tablet works to the same effect.
I used my new tablet and the both were working for the day, both have no problems so far.
I've been reading that they are sending out kill switches in 4 segments, by using the last 2 digits of the serial numbers system.
So mine hasn't gone threw yet i don't think.
So i need to root it?
Then delete the OTA file?
Then flash a custom firmware?
Thanks guys...
Just root it, do a full wipe=factory reset in TWRP and flash a custom Rom like Bliss and you will be OK.
Jarocks said:
If your new tablet is never activated then in theory the killswitch should never be sent out. So as far as I can see flashing a custom rom on the new device before letting it boot into android or connect to the internet should prevent device from showing as having been activated.
Also blocking Nvidia's OTA servers on the network level (you'll need custom firmware on your router) should do the trick as well.
Block all of these:
Code:
23.32.163.186
e886.g.akamaiedge.net
ota.nvidia.com.edgekey.net
ota.nvidia.com
Also it might be worth looking into whether flashing nomoreOTA.zip on the new tablet works to the same effect.
Click to expand...
Click to collapse
Just for info, I found out today that, even if my new tablet was also flashed with nomoreOTA.zip, and even if I did it before there was any internet connexion from it, my old tablet is now flagged and an urgent OTA (in fact the kill switch) is waiting to be sent to it. Of course it still works, thanks to nomoreOTA.zip. But Nvidia did flag the old tablet after 10 days use of the new one (maybe they check serial numbers of tablets connected to grid or to another Nvidia server). Both my old and my new tablets are still working.
Snah001 said:
Just root it, do a full wipe=factory reset in TWRP and flash a custom Rom like Bliss and you will be OK.
Click to expand...
Click to collapse
I see lots of root programs, is there a best one?
Can you flash with TWRP?
And someone said all i have to do is...
"Full Process
1) Unlock Bootloader.
2) Flash TWRP Recovery.
3) Get the no more OTA.zip from XDA and flash it via TWRP
4) Check if the update option is removed from Settings, if not flash it again.
Done! "
Is that ok also?
Thank you...
You need to root to flash twrp?
EowynCarter said:
You need to root to flash twrp?
Click to expand...
Click to collapse
No, but you do need an unlocked bootloader to fastboot flash anything.
amartolos said:
No, but you do need an unlocked bootloader to fastboot flash anything.
Click to expand...
Click to collapse
Yeah, that the conclusion i reached.
Flash done, now runing bliss pop. First start got me loads of errors. I went until i realized i had forgotten to wipe. It's been a while since i last played with custom roms.
oliwek said:
Just for info, I found out today that, even if my new tablet was also flashed with nomoreOTA.zip, and even if I did it before there was any internet connexion from it, my old tablet is now flagged and an urgent OTA (in fact the kill switch) is waiting to be sent to it. Of course it still works, thanks to nomoreOTA.zip. But Nvidia did flag the old tablet after 10 days use of the new one (maybe they check serial numbers of tablets connected to grid or to another Nvidia server). Both my old and my new tablets are still working.
Click to expand...
Click to collapse
Well, that's disappointing
oleg77 said:
Hello. You have to delete a folder (/system/apps/TegraOTA if you are on last firmware, with OTA 3.1) but to do this, you need root as folders in /system are not visible for the normal (unrooted) user. Or you flash a custom firmware, and flash nomoreOTA.zip that you'll find in the same forum : http://forum.xda-developers.com/shield-tablet/general/kill-kill-switch-shield-tablet-xx-t3179489
Be sure to act before you use your new tablet, and ideally do the same to the new one before connecting it to internet. Then the kill switch maybe will not even be sent to you/your old tablet.
:fingers-crossed:
edit : do a search here for 'root shield tablet lollipop' if you need info to get root or flash custom recovery : http://forum.xda-developers.com/shi...t-root-nvidia-shield-tablet-lollipop-t2972316
Note also that if you choose to (and succeed to) flash another (custom) ROM, such as Blisspop, you'll be safe as those custom roms avoid the kill switch (no /system/apps/TegraOTA folder in them)
Click to expand...
Click to collapse
Ok i followed the http://forum.xda-developers.com/shi...t-root-nvidia-shield-tablet-lollipop-t2972316
I got to "On the tablet, select "recovery reboot"
But i didn't see it so i selected reboot, i rebooted and was on stock i think?
1) I can see that a few more steps and i'm rooted.
But i'm nervous to try this again from that point.
Should i just start at unlocking the boot loader?
2) Is rooting the device permanently unlocking the boot loader?
3) can i just no OTA from unlocking the boot loader part?
Ok i got to side loader and in the command it says error can't find device and there's an android guy on his back with a red statement mark.
So I'm in developer USB.
I have unlocked the boot loader
I'm flashing the recovery
And i get to restart in recovery.
Then i get the menus to side load the supersu.zip
I renamed it with out caps, i even made a folder in C:\Program Files\Minimal ADB and Fastboot.
Cause it installed at C:\Program Files (x86)\Minimal ADB and Fastboot.
just to avoid the (x86)
when i try and leave the menu to reset it asked me to root, but i had the error so don't want to brick it if rooting with an error on side loading supersu.zip
What do i do?
Thank you...
says
loading: 'supersu.zip'
error: device '(null)' not found
And no android guy on his back this time.
A hat with a refresh orange symbol.
l337g0g0 said:
says
loading: 'supersu.zip'
error: device '(null)' not found
And no android guy on his back this time.
A hat with a refresh orange symbol.
Click to expand...
Click to collapse
You have unlocked bootloder and installed cwm recovery so yay! Download the SuperSU file on your tablet. Make sure you know where it downloaded to. Boot your tablet o to fastboot menu using the power/vol down. Select recovery mode using volume then power to select. Chose install zip then from sdcard (not the sdcard1) chose 0/ then search for where you put SuperSU and select it. Install. Then navigate to reboot. If asked to fix root pick yes
Sent from my Nexus 5 using Tapatalk
frenziedfemale said:
You have unlocked bootloder and installed cwm recovery so yay! Download the SuperSU file on your tablet. Make sure you know where it downloaded to. Boot your tablet o to fastboot menu using the power/vol down. Select recovery mode using volume then power to select. Chose install zip then from sdcard (not the sdcard1) chose 0/ then search for where you put SuperSU and select it. Install. Then navigate to reboot. If asked to fix root pick yes
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I don't have an SD card ATM. LOL
Why is the command with ADB not working?
l337g0g0 said:
I don't have an SD card ATM. LOL
Why is the command with ADB not working?
Click to expand...
Click to collapse
You don't need a card the sdcard referee to is your internal memory on your tablet. Not sure why ADB isn't working but I had a similar issue with cwm once.
frenziedfemale said:
You don't need a card the sdcard referee to is your internal memory on your tablet. Not sure why ADB isn't working but I had a similar issue with cwm once.
Click to expand...
Click to collapse
Ok that installed it.
WOW thank for that.
I guess I'm rooted, how do i test it and what does being rooted do for me?
Thank you....
Did you go back and flash the nomoreOTA zip? That is the most important part!
Sent from my Nexus 5 using Tapatalk
frenziedfemale said:
Did you go back and flash the nomoreOTA zip? That is the most important part!
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Ok i just flashed nomoreOTA.zip.
It said the file was deleted and was a success.
I guess i can use the internet now?
I'm so nervous to turn the internet on and have the thing reset...
Did i need to run supersu to keep it rooted or always rooted until i use supersu to full unroot.
Thank you...