CURRENT UPDATE 07/August:
able to get into Custom Recovery & Installed 5.1 Stock Image GPE on my XT1032 Moto G
booted using custom recoveries : a)TWRP 2.8.7.0 b)Philz recovery ( philz_touch_6.58.7-falcon )
NEXT STEP : I wanted to Install PA OR REsurrection Latest Custom Build ROM for 5.1 , but getting following error.
Error Messages :-
detetected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
patching system image unconditionally
blkdiscard failed : Invalid argument
Error executing updater binary in Zip "/sdcard/resurrection-falcon.zip "
Error flashing zips , Installation aborted.
Let me know if i am missing anything.
Thanks for your support.
............................................................................................................................................................................................................................................................................
Hi All,
I need your help to enter into recovery. Looks i have messed up something.
Last Version :- Lollipop 5.1 Optimized
Model :- XT1032 GPE
I was getting below error while flashing any 5.1 Custom ROM
patching system image unconditionally
blkdiscard failed invalid argument
error executing updater binary in zip
Hence, i flashed below file.
http://forum.xda-developers.com/moto-g/general/fix-android-lollipop-ota-gpe-stuck-t2970842
I am stuck at bootloader screen & can't go to recovery.
I have tried flashing CWM recovery & TWRP recovery latest version.
Thanks for your support in advance.
I've attached the GPE 5.1 Partition Table (gpt.bin) - flash via fastboot.
EDIT: Regarding "error executing updater binary in zip" - Read the 'Bugs' section post #3 in the Optimized ROMs thread.
Another Issue
lost101 said:
I've attached the GPE 5.1 Partition Table (gpt.bin) - flash via fastboot.
EDIT: Regarding "error executing updater binary in zip" - Read the 'Bugs' section post #3 in the Optimized ROMs thread.
Click to expand...
Click to collapse
@lost101
Thanks for your support.
I was successfully able to get Lollipop 5.1 , but now i am facing another issue.
When i try to install Custom ROM ( installation of latest file " Resurrection-Remix-LP-v5.5.3-20150803-falcon " ) via TWRP custom recovery , i got following error :-
blkdiscard failed : Invalid argument
Error while doing installation from SDcard , Installation aborted.
Model :- XT1032 GPE
Current Setup :- Android 5.1 Lollipop Optimized
I did factory reset while going ahead for installation.
I think the reason might be different partition type ( Moto G GPE= ext4 type , above ROM = f2fs type )
Could you suggest how i am able to install above ROM ?
Thanks for your support in advance.
@as2014 - It probably is a requirement of most custom ROMs to have a f2fs-formatted /data partition. This can be done in TWRP :
Wipe > Advanced Wipe > Select 'Data' > FS OPTIONS > CHANGE FS > F2FS
Need Help
@lost101
Thanks again for your help.
Now , i have changed file system to f2fs via TWRP , but following problems are there :-
1. After rebooting , Phone is stuck up in bootloop.
2. I am not able to access custom recovery via Bootloader ( Bootloader -> Recovery ).
Model :- XT1032 GPE
Android system :- 5.1 Optimized Version.
Thanks again.
Try: fastboot erase userdata - you should now be able to enter TWRP. Also make sure you are using the latest version of TWRP from here:
http://forum.xda-developers.com/moto-g/development/recovery-twrp-2-8-2-0-touch-recovery-t2980621
Thanks
@lost101 ...This helped & i was able to access TWRP custom recovery.
However when i tried to install Custom ROM ( Resurrection OR PA ), i got following error :-
detetected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
patching system image unconditionally
blkdiscard failed : Invalid argument
Error executing updater binary in Zip "/sdcard/resurrection-falcon.zip "
Error while doing installation from SDcard , Installation aborted
Now , i am able to run successfully Android 5.1 Optimized on my Moto G.
But , i certainly wanted to run custom ROM's for few features.
Any suggestion , how to go ahead ?
Thanks for your support again.
@as2014 - Are you using the version of TWRP I suggested? If so, are you doing a factory reset in TWRP before flashing?
@lost101 ......
Earlier , i was 2.8.5.0 TWRP , but now i have tried with twrp-2.8.7.0.-falcon_STOCK.img as custom recovery.
here is complete setup :-
1. Android OS :- 5.1 Optimized & device :- XT1032 GPE , Recovery :- twrp-2.8.7.0
2. Reboot into recovery
3. Change " Data ' Partition to F2FS format via TWRP ( Wipe > Advanced Wipe > Select 'Data' > FS OPTIONS > CHANGE FS > F2FS )
4. Factory Reset
5. Install Custom ROM " pa_falcon-5.1-20150704.zip " OR " Resurrection-Remix-LP-v5.5.3-20150803-falcon.zip "
Error Messages :-
detetected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
patching system image unconditionally
blkdiscard failed : Invalid argument
Error executing updater binary in Zip "/sdcard/resurrection-falcon.zip "
Error flashing zips , Installation aborted.
Let me know if i am missing anything.
Thanks for your support.
@as2014 - There appears to be corruption somewhere. To simplify things, I suggest you return phone entirely to factory condition. Fastboot flash the GPE 5.1 Firmware Image:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
From that point other solutions can be explored if necessary.
as2014 said:
@lost101 ......
Earlier , i was 2.8.5.0 TWRP , but now i have tried with twrp-2.8.7.0.-falcon_STOCK.img as custom recovery.
here is complete setup :-
1. Android OS :- 5.1 Optimized & device :- XT1032 GPE , Recovery :- twrp-2.8.7.0
2. Reboot into recovery
3. Change " Data ' Partition to F2FS format via TWRP ( Wipe > Advanced Wipe > Select 'Data' > FS OPTIONS > CHANGE FS > F2FS )
4. Factory Reset
5. Install Custom ROM " pa_falcon-5.1-20150704.zip " OR " Resurrection-Remix-LP-v5.5.3-20150803-falcon.zip "
Error Messages :-
detetected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
patching system image unconditionally
blkdiscard failed : Invalid argument
Error executing updater binary in Zip "/sdcard/resurrection-falcon.zip "
Error flashing zips , Installation aborted.
Let me know if i am missing anything.
Thanks for your support.
Click to expand...
Click to collapse
Change the steps 3 and 4, do a factory reset first and then format data to f2fs
Sent from my XT1033 using Tapatalk 2
@pradeeppk........Changing the steps 3 & 4 didn't helped.
@lost101 .... Please find the further findings :-
1. I installed GPE_5.1_XT1032_LMY47M.M001_CFC.xml ( Android 5.1 ) via following command sequence :-
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
2. Afterwards , i installed TWRP custom recovery via Bootloader
mfastboot flash recovery twrp-2.8.7.0.-falcon_GPE.img
3. reboot to custom recovery
4. Root via UPDATE-SuperSU-v2.46.zip ...reboot to recovery again
5. Factory Reset
6. Change " Data ' Partition to F2FS format via TWRP ( Wipe > Advanced Wipe > Select 'Data' > FS OPTIONS > CHANGE FS > F2FS )
7. Try to install Resurrection-Remix-LP-v5.5.3-20150803-falcon.zip OR pa_falcon-5.1-20150704.zip. Again Same error :-
detetected filesystem ext4 for /dev/block/platform/msm_sdcc.1/by-name/system
patching system image unconditionally
blkdiscard failed : Invalid argument
Error executing updater binary in Zip "/sdcard/resurrection-falcon.zip "
Error flashing zips , Installation aborted.
Let me know if i can go ahead any further.
Thanks for your support.
@as2014 - Did the Stock Firmware boot without issue?
lost101 said:
@as2014 - Did the Stock Firmware boot without issue?
Click to expand...
Click to collapse
@lost101 .....Yes ....stock firmware ( GPE_5.1_XT1032_LMY47M.M001_CFC.xml ) booted without any issues.
It was downloaded from below Link :-
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
as2014 said:
@lost101 .....Yes ....stock firmware ( GPE_5.1_XT1032_LMY47M.M001_CFC.xml ) booted without any issues.
Click to expand...
Click to collapse
Try some other custom ROMs if you can - I wonder if it's something specific to the ROMs that are failing to flash.
@as2014 - Something that I suspect may have happened is where the /system partition has become read-only. That would explain why you can boot the GPE ROM but not flash any other. If you search XDA you will see it appears to occur fairly often.
Maybe try the following: http://forum.xda-developers.com/note-4-sprint/help/internal-memory-read-fix-apps-t2926040
@lost101 .....
I tried below commands via terminal emulator , but still same error :-
su
restorecon -v -R /data/media
Could you suggest me commands/steps , that i should try to check if /system is read only ?
Thanks for your support.
Can't flash Ressurection Remix - "could not detect filesystem"/failed to mount.../...
I get Error when Flashing RR ROM on my Wiko Getaway, since the thread is abbadoned I must ask here the experts....
I have the ROM form here: "https://forum.xda-developers.com/android/development/port-resurrection-remix-wiko-getaway-t3426641"
I followed all instructions but when I flash the ROM this errors appear at start of instalation:
"could not detect filesystem for /dev/block/mmcblk0p9, assuming ext4
mount: failed to mount /dev/block/mmcblk0p9 at /data: No such file or directory
unmount of /data failed; no such volume
--------------------------------------------
Script says it was flashed successful but when I flash Gapps they wont install coz it says I still have 4.4.4 ROM... also it won't boot up.
I hope any expert can help me out Thank you vm.
I tried to flash Magisk 16.4.zip on micromax a102 using TWRP custom recovery and got an error saying (unable to unpack boot image). I have AOSP 4.6 Nougat(7.1.2) custom rom installed and 3.1.1 twrp. Can anybody help me how I can fix this problem?
SEE THIS ERROR LOG FOR MORE INFO----
- Mounting /system, /vendor
- Found boot/ramdisk image: /dev/bootimg
- Device platform: arm
- Constructing environment
- Adding addon.d survival script
- unpacking boot image
! Unable to unpack boot image
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file 'external_sd/Download/Magisk-v16.4.zip'
Updating partitions details. . .
. . .done
I tried to flash Magisk 16.4.zip on micromax a102 using TWRP custom recovery and got an error saying (unable to unpack boot image). I have AOSP 4.6 Nougat(7.1.2) custom rom installed and 3.1.1 twrp. Can anybody help me how I can fix this problem?
SEE THIS ERROR LOG FOR MORE INFO----
- Mounting /system, /vendor
- Found boot/ramdisk image: /dev/bootimg
- Device platform: arm
- Constructing environment
- Adding addon.d survival script
- unpacking boot image
! Unable to unpack boot image
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file 'external_sd/Download/Magisk-v16.4.zip'
Updating partitions details. . .
. . .done
Hi, I have a problem trying to install lineage os 16. The problem is when I flash the rom with twrp (no matter what version). The installation stops at 46% and I get the following message: "patching system image unconditionally ...
patching vendor image unconditionally ...
detected filesystem ext4 for / dev / block / bootdevice / by-name / system."
After this and after installing the google apps, I reboot but I am loading the rom and later the recovery is restarted.
I tried with abd sideload and copying the zip file to internal storage.
Could anyone help me and give me some advice? Thank you.
I have searched on internet to find a solution but I haven´t see anything