Hi guys
I recive my mi4c today. I have a few questions:
1. Miui stable release: 7.0.99.99 (LXKCNCI) How is this possible? I see here an other number http://en.miui.com/download-293.html
My software isnt original?
2. The phone is not rooted. is that right?
3. How can I pre installed apps remove? I install the stable rom from en.miui.com? What is the best way for me?
thanks.
Ümit said:
Hi guys
I recive my mi4c today. I have a few questions:
1. Miui stable release: 7.0.99.99 (LXKCNCI) How is this possible? I see here an other number http://en.miui.com/download-293.html
My software isnt original?
2. The phone is not rooted. is that right?
3. How can I pre installed apps remove? I install the stable rom from en.miui.com? What is the best way for me?
thanks.
Click to expand...
Click to collapse
1. Probably a fake Xiaomi rom installed from the seller
2. It shouldn't be
3. Pay attention to original rom from Xiaomi, as now the dev rom lock your boatloader, in future stable rom could lock it too.
My advice is to install a custom recovery ( TWRP ), then if you like the miui system you can flash sMiui or Xiaomi.eu rom, otherwise give a try to cyanogen mod.
You can find all info in various thread scattered over the Mi 4c section.
Thanks for the answer.
I searched to information how I can flash TWRP, but I cant find anywhere clean information.
Do you want give me link please?
1. ROM from Xiaomi, but seller modified it....
2. No Root
3. The Best way is stay away from xiaomi official ROM
Another advise... Download Official Xiaomi Fasboot ROM and fastboot tool ...and keep it...for just in case if u want to back stock rom / official rom and sell it......
Install custom recovery TWRP ( Team Superluminal "Cyanogen ROM" or Cofface "Miui ROM") , then flash unofficial MIUI Rom ( sMiui or xiaomi.eu ) or Rom from team Superluminal...enjoy ur great device
custom recovery
how to install just search...
---------- Post added at 11:30 PM ---------- Previous post was at 11:09 PM ----------
Its link what i am using to flash
- download "Download TWRP recovery"....extract it, delete or move 'recovery.img' inside folder.....
- download another recovery (link in my post before) and move .img file in folder u download before ( if name of file blablabla.img, rename to recovery.img )
- make sure ur phone enable usb debugging , go to setting - about phone - see build number and tap several times to enable developer mode...and go to extra setting u will see developer option there and enable usb debugging
- the rest u can check the link...good luck
Hi again!
I have many problems with usb drivers, flash recovery, flash stock miui rom...
Its was very easy with nexus 4. Just typing "flash all.bat" and DONE! 100% clean install.
Now what I did:
- Downloading official stock rom from en.miui.com
- Updated/Flashed via updater app
- Back to recovery, wipe all data.
Everyting going way, except for the apps come with stock miui.
Is this actually a 'clean install'?
Ümit said:
Hi again!
I have many problems with usb drivers, flash recovery, flash stock miui rom...
Its was very easy with nexus 4. Just typing "flash all.bat" and DONE! 100% clean install.
Now what I did:
- Downloading official stock rom from en.miui.com
- Updated/Flashed via updater app
- Back to recovery, wipe all data.
Everyting going way, except for the apps come with stock miui.
Is this actually a 'clean install'?
Click to expand...
Click to collapse
Hello, yes this can be called a clean install...
if you want to get rid of the chinese apps just flash twrp and a custom rom:
1) download TWRP from here https://mega.nz/#!kM02hYKa!YOgKkCtRu-7wQT8JK4naRMPRExwpwKF0_vAVa4nwIqo
2) reboot your phone in fastboot then from cmd "fastboot flash recovery recovery.img", power off and boot directly into recovery
3) download a custom miui from http://www.smiui.net/mi4c_libra.php or http://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
4) wipe all and flash the rom you choose
5) enjoy!
But if I flash twrp recovery, I can install official updates from miui?
Ümit said:
But if I flash twrp recovery, I can install official updates from miui?
Click to expand...
Click to collapse
There is no need of official update, future update from Xiaomi will lock your boatloader... Xiaomi.eu take the official update every week and release their version rapidly, after optimizing and removing Chinese apps...
ice-it said:
Hello, yes this can be called a clean install...
if you want to get rid of the chinese apps just flash twrp and a custom rom:
1) download TWRP from here https://mega.nz/#!kM02hYKa!YOgKkCtRu-7wQT8JK4naRMPRExwpwKF0_vAVa4nwIqo
2) reboot your phone in fastboot then from cmd "fastboot flash recovery recovery.img", power off and boot directly into recovery
3) download a custom miui from http://www.smiui.net/mi4c_libra.php or http://xiaomi.eu/community/forums/miui-weekly-rom-releases.103/
4) wipe all and flash the rom you choose
5) enjoy!
Click to expand...
Click to collapse
Hi, I've received my device but went with 7070 rom stock stable and updated to the last one stable, how do I know if the bootloader is unlock or not?? Thanks
Enviado desde mi RAZR HD mediante Tapatalk
Hello guys, i have a question. What is the proper way of flashing miui updates from twrp. Atm i am on 10.2.2.0 but a new pie udpate has been released and i want to update to it. Also, do i need a certain recovery? I am on pitchblack atm.
I just don't want to brick my phone. Thanks in advance.
You can flash with no problem.
But after flash you lose twrp (it will be stock recovery). Need it reflash.
I successfully updated to pie, but a problem emerged. I can no longer flash magisk. Flashing magisk results in a bootloop and when i uninstall it from the recovery, the phone boots normally.
Any suggestions?
Did you flash that zip "lazyflasher"? For the dm verification thing.
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash
Hello community!
Hope you are doing awesome, I am trying to install specifically the update from the 18 th of May (latest while doing this post) so when I downloaded it I go to TWRP and this is what I done
1)Place my pin and decrypt the device
2) Perform a format Data > Yes
3) Wipe cache, dalvik, internal
4) Restart to Recovery
5) Install the update all seems to be fine and reboot to system
The Phone boots to Poco screen and then vibrates and then gets me back to TWRP. I manage one time to get it worked and got in the config page from the customer rom a UI unresponsive message and is unable to connect to my Wifi so I have to use the Data 4G to make it work and I rolledback to April version of Arrow OS that seems to be the one working now.
The Miui stock that I am using to install the customer Rom is surya_global_images_V12.0.8.0.QJGMIXM_20210222.0000.00_10.0_global
Could you please provide some hints and tips what I am doing wrong so I can get this updates up to date? Because I love the Arrow OS Rom and I want to keep the firmware updated correclty on my side.
Thank you!
I am very interested, too. Got the same problem. After latest OTA-Update I'm stuck in a recovery bootloop as well.
Sadly even the attempt to flash back an older version or a MIUI Stock rom is failing for me now. Always recovery bootloop, even after a successfull flash without errors (and format data of course) .
Is the stock rom or an older arrow os version working for you, after the 18th May update?
@koelbche I was able to make a stock based on the stock fw shown on my post. then I installed old version of arrow OS April update and it was restarting bootloop.
I had to delete data, factory reset and select de wipe options so super clean flash and manage to boot it up.
I am waiting for any updates from others that manage to install the updates because I was not able to do it.
Flash ArrowOS custom recovery for ota update to work. After update you can flash recovery back to TWRP for root and backup, your choice.
I was able to make it worked in another post.
All I have to do was to update the version of the stock with Oss vendor (I think) and then all worked like a charm!.
Thanks for the replies though
So, I rooted my phone, for which I needed to unlock the bootloader and install TWRP. Now, when I want to install an update on my phone, it downloads and when I want to install it, it jumps to TWRP recovery instead of the phone's recovery, so I can't update my phone. Does anyone know how can I install the updates from TWRP?
Else, reinstall the default recovery. (Only the recovery, not the entire OS since that would un-root my phone)
Thanks.
Edit: After it boots to TWRP, it apparently tries to install the update, since I can see it on the log, but when I reboot my phone it has not installed. It errors: "E3994: This package is for "2169B" devices; this is a "". Updater process ended with ERROR: 1. Error installing zip file '/data/ota_package/OTA/.otaPackage/my_manifest_RMX3370_11.F.04_3040_202302282047.44.36402b59_all.zip'
Edit 2: After failing to install it, it prompts me to re-download it and re-install it, but it jumped from ~500MB update to 4.76GB update.
( may loose data)
I read in telegram channels, this twrp: https://www.pling.com/p/1922292 support installation latest zip. but I haven't tried.
one more thing you can do is ( may loose data)
1. restore twrp backup for recovery partition ( if you don't have backup. search recovery.img in upgrade zip )
2. reboot to recovery to check stock recovery is installed
3. install update
4. then follow steps to install twrp and magisk ( root again )
SanOne+1 said:
( may loose data)
I read in telegram channels, this twrp: https://www.pling.com/p/1922292 support installation latest zip. but I haven't tried.
one more thing you can do is ( may loose data)
1. restore twrp backup for recovery partition ( if you don't have backup. search recovery.img in upgrade zip )
2. reboot to recovery to check stock recovery is installed
3. install update
4. then follow steps to install twrp and magisk ( root again )
Click to expand...
Click to collapse
Your guide is incorrect and will definitely put the device into bootloop.
** The twrp link that you shared doesn't allow system updates to install, it is just a A13 compatable twrp recovery.
1) What if that person has not created any twrp backup of all system partitions? According to his explanation, I'm pretty sure he has not created any backup of the partitions.
2) only flashing recovery image and installing the update will again put the device into bootloop because as confirmed by the OP that his device is rooted and due to root the boot image of the device gets modified so it will put the device into bootloop.
3) unless the OP has stock boot and recovery images at his disposal he should not attempt to install the update to avoid bootloop.
** Kindly avoid sharing incorrect information you aren't sure about the correct procedure.
procedure that I follow to flash updates :
1) in magisk - uninstall magisk - restore images
2) boot device into bootloader and flash stock boot and recovery.
3) boot device and install update.
4) put device again in bootloader and flash twrp and within twrp flash magisk and reboot.
I haven't found any easier way than this. If anyone has, kindly put it below.
There's a way
Rui 4.0 Android 13 f.02
So, any verdict on this new update for the people that did update to it?
forum.xda-developers.com
Recetly I succesfully updated my Realme GT Neo 2 5G via TWRP recovery, the latest version support OTA.
Attention! After update TWPR and Magisk gone. Just reflash twrp and flash magisk normally. No need to reflash modules etc. (Just update from settings, no need to manually flash ota package from TWRP)
Hello mate can u help me with something real quick. Y are there no recent updates for gt neo 2 and if u r using a custom rom based gt neo 2 hows ur experience so far. Thanks in advance
Xemi_KryTeT.pl said:
Recetly I succesfully updated my Realme GT Neo 2 5G via TWRP recovery, the latest version support OTA.
Attention! After update TWPR and Magisk gone. Just reflash twrp and flash magisk normally. No need to reflash modules etc. (Just update from settings, no need to manually flash ota package from TWRP)
Click to expand...
Click to collapse
Which rom r u running and is it good?
Sabirsayed09 said:
Hello mate can u help me with something real quick. Y are there no recent updates for gt neo 2 and if u r using a custom rom based gt neo 2 hows ur experience so far. Thanks in advance
Which rom r u running and is it good?
Click to expand...
Click to collapse
Latest stock (4.0), I'm not going to flash custom roms for now