Hi all,
I've stupidly flashed OTA in TWRP and forgot to flash the TWRP installer afterwards. Is there a way within Android to force a slot switch on reboot?
If not I'll just have to fastboot boot TWRP.
Swatto86 said:
Hi all,
I've stupidly flashed OTA in TWRP and forgot to flash the TWRP installer afterwards. Is there a way within Android to force a slot switch on reboot?
If not I'll just have to fastboot boot TWRP.
Click to expand...
Click to collapse
I'm not sure sure if you can do it within android, but you can boot to fastboot mode and type "fastboot --set-active=a" or "fastboot --set-active=b" depending on which slot you want active.
Try flashify
Bradl79 said:
Try flashify
Click to expand...
Click to collapse
I thought I read somewhere that flashify isn't set up properly for project treble (a/b slots)
Cheers for the replies. Sorted now, ended up having to use a computer to fastboot.
Flashify was updated back in 2015 as far as I can see, not sure it supports A/B partitioning that Oreo uses.
I loved Flashify, but no way in hell would I use it to flash anything on this phone.
iElvis said:
I loved Flashify, but no way in hell would I use it to flash anything on this phone.
Click to expand...
Click to collapse
What he said ^^
Related
Is there a guide for rooting the Rogers Pixel on 7.1.1??
Sent from my Pixel using XDA-Developers Legacy app
christanya99 said:
Is there a guide for rooting the Rogers Pixel on 7.1.1??
Sent from my Pixel using XDA-Developers Legacy app
Click to expand...
Click to collapse
https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-unlock-root-flash-pixel-xl-t3507886 disregard anything about verizon as you do not have that model.
its for the XL but the exact same method applies, just make sure you get the TWRP RC1 zip and image from here
root is here 2.79 SR3
Great, thanks a ton!
Sent from my Pixel using XDA-Developers Legacy app
k.s.deviate said:
https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-unlock-root-flash-pixel-xl-t3507886 disregard anything about verizon as you do not have that model.
its for the XL but the exact same method applies, just make sure you get the TWRP RC1 zip and image from here
root is here 2.79 SR3
Click to expand...
Click to collapse
I just rooted successfully but didn't install TWRP. Can I just boot back in through fastboot and install it now?
christanya99 said:
I just rooted successfully but didn't install TWRP. Can I just boot back in through fastboot and install it now?
Click to expand...
Click to collapse
Yes, put the zip on your internal storage and boot into fastboot and then boot into the TWRP image and flash the zip.
k.s.deviate said:
Yes, put the zip on your internal storage and boot into fastboot and then boot into the TWRP image and flash the zip.
Click to expand...
Click to collapse
Uh oh! Just did this now it's booting straight to TWRP...
christanya99 said:
Uh oh! Just did this now it's booting straight to TWRP...
Click to expand...
Click to collapse
Put the TWRP RC1 zip on the internal storage
Fastboot boot TWRP RC1.img
*Might have to do that a couple times for TWRP to properly decrypt.
Flash TWRP RC1 zip to apply it
That's how to get TWRP.
Your saying you did this and when you reboot system from TWRP it just reboots to TWRP?
k.s.deviate said:
Put the TWRP RC1 zip on the internal storage
Fastboot boot TWRP RC1.img
*Might have to do that a couple times for TWRP to properly decrypt.
Flash TWRP RC1 zip to apply it
That's how to get TWRP.
Your saying you did this and when you reboot system from TWRP it just reboots to TWRP?
Click to expand...
Click to collapse
Exactly. I can't boot into the system anymore. Google logo pops up and then straight to TWRP every time.
christanya99 said:
Exactly. I can't boot into the system anymore. Google logo pops up and then straight to TWRP every time.
Click to expand...
Click to collapse
Almost sounds like you fastboot flashed TWRP instead of fastboot boot TWRP. Either way, I believe you will have to flash the factory image and start over. You could try fastboot flashing the stock boot image first to see if that helps.
k.s.deviate said:
Almost sounds like you fastboot flashed TWRP instead of fastboot boot TWRP. Either way, I believe you will have to flash the factory image and start over. You could try fastboot flashing the stock boot image first to see if that helps.
Click to expand...
Click to collapse
Ok, thanks! Will give it a try.
That did it. All is good now. Thanks!
I'm trying to boot into TWRP to install it from there ("fastboot flash recovery" doesn't work), but "fastboot boot" just makes my phone boot normally. Anyone know what's going on?
Edit: I'm just dumb and had the wrong image. I extracted the image from the installation zip rather than the separate .img download for fastboot.
Darkscan said:
I'm trying to boot into TWRP to install it from there ("fastboot flash recovery" doesn't work), but "fastboot boot" just makes my phone boot normally. Anyone know what's going on?
Click to expand...
Click to collapse
Issue with TWRP. What are you running?
Blue1k said:
Issue with TWRP. What are you running?
Click to expand...
Click to collapse
Latest versions of stock Android, EDB, and TWRP.
This happened to me, I redownloaded the twrp image, rebooted my phone, tried again and it booted to twrp.
I'm just an idiot. I hadn't done this in a long time, so for some reason I extracted the .img from the .zip, rather than downloading the image labeled fastboot.
On a related note though, do OTAs work with systemless root? Last I checked it was up in the air, but there's been some time now -- could someone link me, perhaps?
Darkscan said:
I'm just an idiot. I hadn't done this in a long time, so for some reason I extracted the .img from the .zip, rather than downloading the image labeled fastboot.
On a related note though, do OTAs work with systemless root? Last I checked it was up in the air, but there's been some time now -- could someone link me, perhaps?
Click to expand...
Click to collapse
it's supposed to work and I don't see why it wouldn't. (I never tried personally) but you will need to have the stock recovery for the OTA to flash.
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
Hi sorry to hear that you got this problem and hopefully it gets fixed. I have another question: does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? Does that mean after installing, everything will be refreshed like a box opened phone?
dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
h0l said:
Run this command in fastboot so you know which is the CURRENT active slot :
Run this command so you can flash the correct slot : replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
djsubterrain said:
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
Click to expand...
Click to collapse
Which is the default active slot? Is it okay to use either of the 2?
dmj0shu4 said:
Which is the default active slot? Is it okay to use either of the 2?
Click to expand...
Click to collapse
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
djsubterrain said:
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
Click to expand...
Click to collapse
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
dmjoshu4 said:
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
Click to expand...
Click to collapse
You are supposed to flash it in the one that IS the active one. Because you do want to root the slot that you'll be booting.
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
gh279760559 said:
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
Click to expand...
Click to collapse
not everything, just twrp and root will be gone if you restarted without installing magisk to the inactive slot
h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
dude, thanks for this, i was banging my head against a wall trying to get root to work. I used your patched boot img and i had the version mismatch, but i local updated my android and it has root!
dmj0shu4 said:
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
Click to expand...
Click to collapse
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Hi guys.. can you post the steps in rooting android 10??
I've already had bootloader unlocked.
Do i need to.follow the steps intended for android 9??
Like
1. Install TWRP via fastboot.. (2files)
2. Reboot to twrp.
3. Flash magisk via twrp??
Is that it?? If so. Then after reading this thread.. some of. You mentioned about boot. Img?? Patched?? What's that supposed to mean?? Sir??
Thanks. Any advice is highly appreciated..
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
And by the way..
Im on Gm1910 model. Global rom. Gm21AA build.. if that info would matter.. i dont actually need the root on android 9. Coz parallel app is working.. but now in android 10. It isnt working.. so.i need to root to grant su to game guardian.. thanks..
MigbyPie said:
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Click to expand...
Click to collapse
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
E30Nova said:
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
Click to expand...
Click to collapse
Hopefully there will be a solution. I had tried to update from Pie to Q10 while staying rooted and it didn't work. So I had to wipe the whole device and decided to wait for a smoother root method for my device. If you have any other ideas about rooting Q10 let me know. Thank you
h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
You saved my life! Thank you!
But how do we get twrp now? Is there any way?
Me too. Use tool all in one but it doesnt work. Stuck at "waiting twrp boots".
Any help, thanks.
Same here any Solution?
Sent from my GM1911 using Tapatalk
---------- Post added at 08:14 AM ---------- Previous post was at 08:14 AM ----------
Stuck at Fastboot booting when flashed img and also zip
Sent from my GM1911 using Tapatalk
I updated my phone to 10 last night, followed the same guide as I have for every other update but this time I lost root for some reason.
I still have TWRP recovery on there but it can't read internal storage so I can't flash Magisk.
I tried changing file system to ext 2 then back to 4 and then repairing it as I read elsewhere and this wiped the phone obviously but internal storage seemed to be working until I set the phone up again, downloaded Magisk, rebooted to recovery and I'm back where I started, internal storage showing as 0mb in TWRP.
Any ideas how to fix?
I am currently on OOS 10 OB2/31 and can't seem to find a way to install TWRP and Magisk. Found ways to install TWRP and Magisk via patched boot images on OOS 10 stable but not for OB2/31.... anyone know why it's not as simple as flashing TWRP via fastboot?
I also have a problem
'OOS10beta31' Root
XcutionerX said:
[...] anyone know why it's not as simple as flashing TWRP via fastboot?
Click to expand...
Click to collapse
Because OnePlus upgraded the bootloader in their OOS10 release. One of the changes was disabling the fastboot boot command that you usually needed to boot to TWRP. Without that command, you had to flash the TWRP img files onto the boot partition first in order to be able to boot TWRP.
There are many -- maybe a bit too many -- guides on how to install TWRP on OOS10. Here and here are some I found.
The gist of it is to boot to TWRP by running the fastboot flash boot twrp_file.img command, rebooting to recovery, then flashing the twrp zip file. And that's pretty much it.
PS In my case, I wasn't able to reboot to TWRP by using mauronofrio's twrp-3.3.1-14 version, and had to use his twrp-3.3.1-11 instead.
adeklipse said:
Because OnePlus upgraded the bootloader in their OOS10 release. One of the changes was disabling the fastboot boot command that you usually needed to boot to TWRP. Without that command, you had to flash the TWRP img files onto the boot partition first in order to be able to boot TWRP.
There are many -- maybe a bit too many -- guides on how to install TWRP on OOS10. Here and here are some I found.
The gist of it is to boot to TWRP by running the fastboot flash boot twrp_file.img command, rebooting to recovery, then flashing the twrp zip file. And that's pretty much it.
PS In my case, I wasn't able to reboot to TWRP by using mauronofrio's twrp-3.3.1-14 version, and had to use his twrp-3.3.1-11 instead.
Click to expand...
Click to collapse
Thank you for your help, gonna try following those. Hopefully I don't f up and have to do a msm restore. But why would they disable that command?... Just to make everything complicated? Guess I will not stick to Oneplus next year.
XcutionerX said:
But why would they disable that command?
Click to expand...
Click to collapse
Security? Deprecated or soon-to-be-deprecated command? Dunno really, lol.
XcutionerX said:
... Just to make everything complicated?
Click to expand...
Click to collapse
To be fair, the only difference between this method and the old method is just one word and manually rebooting to recovery. You still have to flash the twrp.zip after flashing from bootloader file to install TWRP, so it's not too radically different.
this can help
https://forum.xda-developers.com/showpost.php?p=80897567&postcount=332
adeklipse said:
Because OnePlus upgraded the bootloader in their OOS10 release. One of the changes was disabling the fastboot boot command that you usually needed to boot to TWRP. Without that command, you had to flash the TWRP img files onto the boot partition first in order to be able to boot TWRP.
There are many -- maybe a bit too many -- guides on how to install TWRP on OOS10. Here and here are some I found.
The gist of it is to boot to TWRP by running the fastboot flash boot twrp_file.img command, rebooting to recovery, then flashing the twrp zip file. And that's pretty much it.
PS In my case, I wasn't able to reboot to TWRP by using mauronofrio's twrp-3.3.1-14 version, and had to use his twrp-3.3.1-11 instead.
Click to expand...
Click to collapse
I have successfully installed TWRP and Magisk with the help of those links. Thank you again for your help.
quizzina said:
this can help
https://forum.xda-developers.com/showpost.php?p=80897567&postcount=332
Click to expand...
Click to collapse
Thank your for the in-depth explanation.
Just download oxygen updater and install 10.0.1 and be done with it
I ended up flashing TWRP over my boot slot (B) and now I just boot into TWRP. I have already installed TWRP on boot slot (a). I can't remember which version of oxygenOS I have installed and couldn't find a way to confirm. How can I fix this? Also want to update to latest version of oxygenOS and android. No data on phone yet. phone still connects to computer, adb sideloader and fastboot commands still work work. Thanks
Are you saying you did fastboot flash boot of the TWRP img? You should be doing fastboot boot TWRP img, then flash the TWRP installer zip.
You can get the OS back up and running by flashing the correct boot.img via fastboot. Or use one of the fastboot stock ROMs.
redpoint73 said:
Are you saying you did fastboot flash boot of the TWRP img? You should be doing fastboot boot TWRP img, then flash the TWRP installer zip.
You can get the OS back up and running by flashing the correct boot.img via fastboot. Or use one of the fastboot stock ROMs.
Click to expand...
Click to collapse
ya, I fastboot flash boot the TWRP img following this video youtu.be/3oSycujvmP8?t=296
I guess I'll start flashing boot images until I land on the correct OS version, thanks
doctor_whooves said:
ya, I fastboot flash boot the TWRP img following this video youtu.be/3oSycujvmP8?t=296
I guess I'll start flashing boot images until I land on the correct OS version, thanks
Click to expand...
Click to collapse
never follow youtube guides...
follow the guides that are up to date here on XDA.
Look for the TWRP thread and follow the steps there.
boot to fastboot
boot TWRP image
Flash TWRP installer
success
plasticarmyman said:
never follow youtube guides...
follow the guides that are up to date here on XDA.
Look for the TWRP thread and follow the steps there.
boot to fastboot
boot TWRP image
Flash TWRP installer
success
Click to expand...
Click to collapse
But to recover his phone, the OP will need the original boot.img from his OS version.
OP has already messed up the boot partition.
That has to be fixed first.
tech_head said:
But to recover his phone, the OP will need the original boot.img from his OS version.
OP has already messed up the boot partition.
That has to be fixed first.
Click to expand...
Click to collapse
in this case the best thing to do is just unbrick using MSM
plasticarmyman said:
in this case the best thing to do is just unbrick using MSM
Click to expand...
Click to collapse
Yes, I had to unbrick using msm. It worked. Was able to get phone rooted and stock recovery replaced with TWRP but it was a much bigger pain than I expected.
doctor_whooves said:
Yes, I had to unbrick using msm. It worked. Was able to get phone rooted and stock recovery replaced with TWRP but it was a much bigger pain than I expected.
Click to expand...
Click to collapse
Glad you got it recovered.
There is an application called "Partitions Backup".
It allows you to back up all the phone partitions. The one you really want to backup from now on is the boot_a and boot_b.
Since you are rooted when you do an upgrade, grab the boot_a and boot_b before installing Magisk after the install.
This allows you to go back to stock. After you back them up, copy them to a computer.
hey guys. Not able to flash oos through twrp.
getting "error flashing zip".
tech_head said:
Glad you got it recovered.
There is an application called "Partitions Backup".
It allows you to back up all the phone partitions. The one you really want to backup from now on is the boot_a and boot_b.
Since you are rooted when you do an upgrade, grab the boot_a and boot_b before installing Magisk after the install.
This allows you to go back to stock. After you back them up, copy them to a computer.
Click to expand...
Click to collapse
Doesn't TWRP back up everything including boot partitions?
Is there nothing that will take the entire internal storage and just make a 'bare metal' image of it for restoring.. the whole entire thing, byte for byte? If not, why doesn't this exist? It just seems so logical to me and would be so incredibly useful. Phone borked? No problem. Just re-image it form the archive you made. To me, that is what TWRP is all about, at least conceptually if not technically.