Hello, I apologize if I was wrong to write... My English is not the best .
My smartphone is Huawei G620s, since some time besides recharging the battery, it does not allow me to exchange files with the computer (connecting it by cable) .
Sometimes when I connect it to an electrical outlet, it does not charge me unless I restart it.
I've an Lineage ROM and TWRP Recovery.
Please, could you help me?
UP
Related
I have installed the wizard ROM on my SPV m600. No excuses, I got the files mixed up and didn't check before I installed. The only way I can get anything to happen is to plug into the mains then I can get into the 3 color screen by holding camera for 5-7 seconds. If plugged into the PC the screen just flashes.
I know its a long shot but is my phone really dead ?????
Any suggestions really appreciated.
If you get those EXE ROM upgrade files from the xda-dev ftp, you ought to able to flash your phone from the 3 colour screen even if activesync is not working. I'm not sure about prophet, but you can try those EXE ROM upgrades files that has something like `no-ID` tag on their name.
Thanks for your advice but I cant plug it into the pc to do anything. It just flashes ? Also, I'm new to this site. Could you tell me what they are and how to get the EXE ROM upgrade files please.
After reading through a fem posts, there seems to be a way of accessing through a terminal program "mtty.exe" have you heard of this ?
Thanks
Do u get USB connectivity, if not then try SD Backup while plugging in main.
No USB connection at all, however, wescomm.exe does start. Ative sync dose not do anything. I will try the SD Backup method and post the result here after work.
Thanks
pgantley said:
No USB connection at all, however, wescomm.exe does start. Ative sync dose not do anything. I will try the SD Backup method and post the result here after work.
Thanks
Click to expand...
Click to collapse
Did U get any success??
None :-( It's stuffed, I have tried everything now. If only there was a way to read from the sd card while plugged into the wall socket. I had the idea of building a cable that splits. One end is plugged into the mains, then split the cable and run a standard usb cable into it from the PC ???? Just an idea. I have tried using an Ipod wall charger with USB slot (the same output) and an external hard drive caddy cable with two USB's one into the Ipod charger and one into the PC, then the other end into the PDA. It just flashed as though it was just plugged into the PC with a data cable !!!!
Any other suggestions would be great. Its so depressingnot having my faithfull device, I even went out and bought a razr V3, while I wait to get it sorted. Deffo not the same........
I found a place in London that claims they can sort it for £29.00 plus postal & insurance costs. I'll check it out first, I have family in London who can verify the place. I suppose if they can sort it for that price, its worth posting details of the company.
pgantley said:
It just flashed as though it was just plugged into the PC with a data cable !!!!.
Click to expand...
Click to collapse
I meant, the screen just flashed on and off, not flashed as in ROm flash
I posted it to London. Will post what happens.
Does this place in london has a website so may check it?
Yep, its www.turnonyourmobile.com
They are unable to fix my phone, The ROM cant be accessed to be written to ? They have suggested I call orange and see if they can do anything.
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
cscheng:
I losted a lot of times comm upgrading Roms and NOTHING HAPPENS! (sorry for screaming...) Try to search some info at forums but....
-Try to close your upgrading soft (PC)
-Switch off-on your phone
-Connect usb cable again and try to upgrade now.
(maybe it refuses 2 or 3 times the upgrading, but I was trying and after 4 times it was like ever!)
Please, make it as your own risk.
Good luck friend!!
I have same Problem PLease Help
Have S200 G3 in Tri Color screen that gets to 50% on ROM load before it starts shutting off n on. It does the same thing if it is plugged into a pc via usb cable w/ battery installed after a short period of time.
It does not turn off n on it it is simply sitting there w/ the battery installed. Only when it is plugged in w/ a USB.
Does some 1 have access to info on phone recovery via flash card and Rom that I can use.
If not steps on resolving the problem long enough to load a basic Rom on the unit.
cscheng said:
This morning I tried to flash bikertibi's WM6.5 ROM.
In the middle of flashing, the connection was lost and now my phone is stuck in the tricolor bootloader screen.
the weird thing is that the screen keeps flashing? is like it keeps restarting every 15 seconds or so. So it can't retain a connection with my computer long enough for me to do anything.
when i take out the battery and leave it for a while before placing it back, it could hold the connection for a longer period of time (but not that long. probably for a minute?).
i can't figure out what is the problem. I've changed the USB cable and still no change. could it be the battery has problems or is it a hardware problem?
many thanks to anyone who could help (tho i'm not optimistic since this part of the forum seems quite dead)
Click to expand...
Click to collapse
Provide better break down, if possible w pics of actual steps. Ex. I don'd understand what you mean about the white wire and middle conectors in battery section. Only allow the other 2 to connect or ???
Dr.Thrax said:
well
Now...this is vry important ...... plz do at ur own risk...
remove the battery
Cut ur data cable (USB) and u'll find a white wire in da bundle of wires ... connect it to the battery plug near the camera
All the others , u connect to the last plug...(there are 6 plugs for putting battery...do not connect to the middle ones)
now connect the USB cable to ur "xp" pc.
the pc will recognize the device and start syncing...
run the rom u want AFTER COMLETING SYNC ... It is sure to succeed ...
plz if any thing happend let me know
Click to expand...
Click to collapse
Hey guys
I couldn't get an answer to my question in any topic, so I decided to post here and ask for help.
I bought a Galaxy 5 from my neighbor and I didn't test it 'cause it was with the battery discharged.
I charged the battery to 100% I tried to turn on my galaxy.
But every time I try to turn on the smartphone, It get stuck on a screen with samsung logo and with the text: "Ramdump mode (arm9 mode)".
I just tested it in 4 computers but everytime I connect the phone to usb it just starts to charge the battery.
I can enter in download mode to put a stock rom on it, but it doesn't help me so much 'cause if my phone isn't recognized in the PC and in Odin, I can't do nothing.
So that's the situation: My smartphone isn't recognized by the computer (windows don't at least show any message about usb device connected). When I plug it in usb it just starts to charge.
So I'm asking for help.
Is there any way to put a bootable android in my microSD that starts automaticlly the installation when I turn on the phone ?
Thanks
Anyone haver a solution for this problem?
Hello everyone,
I am having a problem, my android (Overmax Vertis 4510 EXPI) can't connect to computer. I think the problem is fast charging (AC), but this phone doesnt have off button for fast charging, so I downloaded a program that disables fast charging. It requires root, and there is almost none root for this phone, only through computer, and how you know i can't connect my phone to computer...
Any help would be appreciated.
Sry for bad English.
I was buy android phone 9 days ago.
First case, my battery indicator stuck on 50%, after use or charge only stuck on 50%.
Second case, when i connect my phone to pc, nothing happen, only charging indicator.. Nothing popup mtp or storage device option or something.. I have enable usb debugging on developer option.
And another testing, I try connect my usb OTG type-C, but my phone cant detect my otg..
What should i do to fix this issue? This is bugs on my ROM or from my usb type-C phone connector broken?
pls help me :''/
Sorry i can't added picture, beause my phone totally can't use after all experiment and wipe all data..
Stuck with TWRP and "No OS installed".
Btw, I can't insert ROM files to my device, because my phone cant recognize my pc or transfer data via usb..
feels life on flintstones century, disconnect communication from all my friend more than 3 days :'(