Hi all, hoping someone is able to help with the below issue.
Have a Xtron TB706PL, currently the volume up button is not working.
All other buttons work fine, pressing the Reset button briefly mutes the unit on/off, long press resets the unit.
The unit was working fine when I first picked it up, but bluetooth was not working in terms of finding devices.
Did a dmcu.cfg update using the file from the link below, and the problem with the volume button began after that. Unfortunately I did not back up the system dmcu.cfg correctly as I saved it to flash instead of GPS (SD Card) before the change.
Managed to get the bluetooth finding devices though.
Any way of getting the factory dmcu.cfg?
Is that most likely the issue?
https://forum.xda-developers.com/an...development/bluetooth-xtrons-tb706pl-t3703730
Running Android 6.0.1
MCU Version MTCE_GS_V2.84_1
Cheers,
Have you tried assigning button in factory settings?
Thanks marchnz for the reply.
I believe I have got the correct process, but could be doing something wrong.
I have gone to factory settings and reset the key panel, then when I go to key panel study, pressing any of the four input keys does nothing at all, as if it doesn't register the press. Nothing appears on the screen to allocate the function for the key. I have seen other people's videos on how this is meant to work but doesn't for me.
As a new member, can't link any think yet.
YouTube search:
Touch-screen calibration and touch button program for PX5
(Be sure to touch the "red" mark!, I did it backwards messing around and caused my touch input to be all inverted)
Try this, I did the same thing on my Dasaita unit.
Note: (at least for my unit) don't program longpress function...it won't take it and thus default you back to square one (no working panel buttons)
Hope this helps
Sent from my SM-G955U using Tapatalk
Guys, thanks for the help and advice!!!
Doing what Hkw84 advised resolved the issue, video made things clear.
I was using panel key study in trying to setup the keys and not the touch key study which makes complete sense now as the keys on my unit a touch sensitive like the screen...doh
Appreciate the help, deciding if i should upgrade to malaysk Android 8 now
Cheers,
Related
I've got a problem configuring iGO8 to use the hardware keys, such as the volume up, volume down, and back key. I know the keycodes for these keys, but when I edit the keybind section in iGO it won't respond to any hardware key input. Did anybody get this to work on his Topaz? If so, how?
I'm using iGO 8.3.2.96054. These are my edits to the keybind so far:
x75="VOLUMEUP"
x76="VOLUMEDOWN"
x875="PREVSCREEN"
Any help is appreciated. Thanks in advance.
Zoom in zoom out hardkeys really needs
The topic has disappeared onto the 4th page by now, so I thought I might bump it. Can anybody please help me on this? I have done more internet research now, but I still have no answer.
i think its waste of time cause when newer version of igo come out it will support topaz buttons by default.
Medusar said:
I've got a problem configuring iGO8 to use the hardware keys, such as the volume up, volume down, and back key. I know the keycodes for these keys, but when I edit the keybind section in iGO it won't respond to any hardware key input. Did anybody get this to work on his Topaz? If so, how?
I'm using iGO 8.3.2.96054. These are my edits to the keybind so far:
x75="VOLUMEUP"
x76="VOLUMEDOWN"
x875="PREVSCREEN"
Any help is appreciated. Thanks in advance.
Click to expand...
Click to collapse
In order to have working volume keys BEFORE starting igo you HAVE To change screen keyboard from HTC to default Windows one. HTC Keyboard is hooking to volume up/down key presses and iGo doesn't see their state.
How would I do that? I searched in the settings for an option, but I can't find a setting to change back to the standard windows keyboard. I have found a setting allowing me to choose between touch input and a keyboard, but the latter seems to be a hardware keyboard option as is sets itself back. The touch input option is selected by default, it's the default HTC setting.
Today I did a software reset so I could let me fiance use my phone since it was a little better than her outdated Huwei. Upon rebooting the Home button no longer funtioned. It will still wake the screen however it does not function in any other way (so obviously its not a physical issue).
I was able to pull up the files to view the mapped buttons and even tried the app on xda for button remapping. However the crossover comes with an extra function button in the top left corner which doesn't function at all any more. This tells me that the mapping file was over written with an incompatible file. Possibly an issue with a wrong file being assigned after a software reset. Not quite sure.
What I would like to happen is to see if anyone else here has a Pantech Crossover and can simply send me there button assignment files.
Another issue I ran into after the reset was the notification bar (still shows at the top) is not draggable. I am not able to pull it down or even hit the "notifications" button under the menu when you hit the menu button from the home screen.
I am no noob to technology so feel free to ask for anything. If you have a crossover and are unsure on how to get those files please let me know and I will direct you. (Please already be rooted.. there are plenty of great guides on these forums on how to do this for both firmware versions available)
Can anyone advise on how I could ho about changing the list of apps that gets started by the Mode function on my Xtrons unit (MTCD GS PX5 oreo)?
I know someone has done something similar with a Joying unit, but as far as I can see, they replaced the "Sofia-1-C9-Server... apk) with an alternative version.
I've pulled all the system apps to my PC via ADB (root) via WiFi, and I can see apps like MTCControlSettings.apk and MTCContolInfo.apk but there are no apks with "server" in their name
So I'm not sure where to start looking for the APK which handles the steering wheel control "Mode" handling.
Does anyone know how this is handled ?
are you able to resolve it? im having the same problem. btw my unit is a MTCE_CSN thanks
slidefriday said:
are you able to resolve it? im having the same problem. btw my unit is a MTCE_CSN thanks
Click to expand...
Click to collapse
I've not had time to investigate this.
For the moment, I've just set my Mode button to be the Home button, as thats better the cycling through a load of useless "modes" like the AV input and their useless audio and video players.
I did try to work out how the radio communicated with the system apps, but I'm having a lot of difficulty de-odex'ing (decompiling) even the radio app. Because the apps are Oreo versions, and most of the decompilers don't fully support Oreo odex (compiled application program) files
I did post a question to the general Dev part of XDA about de-odex'ing Oreo files but didnt get any responses
I would be interested in this if you figure it it out as I'd like to get dab in the list of apps it cycles through.
RogerClark said:
I've not had time to investigate this.
For the moment, I've just set my Mode button to be the Home button, as thats better the cycling through a load of useless "modes" like the AV input and their useless audio and video players.(
Click to expand...
Click to collapse
That would be enough for me, but with onboard apps or settings i haven't found a way to change it. I can use my Wheel control for changing volume and skipping music in any music app I am using, but the mode button always switches throug radio, ac input, mediaplayer and dvd.
The app for steering wheel control which was preinstalled on my head unit, doesn't react to any button and the firmware settings only to the hardware buttons of my head unit.
So, how did you do it?
nadkp said:
That would be enough for me, but with onboard apps or settings i haven't found a way to change it. I can use my Wheel control for changing volume and skipping music in any music app I am using, but the mode button always switches throug radio, ac input, mediaplayer and dvd.
The app for steering wheel control which was preinstalled on my head unit, doesn't react to any button and the firmware settings only to the hardware buttons of my head unit.
So, how did you do it?
Click to expand...
Click to collapse
In the Settings, ( think its in the Car) section, is the setting (app) which allows you to associate specific steering wheel buttons with specific actions.
I thought all generic units had this app, because the steering wheel button for each car operate differently.
My Subaru only has one wire from the steering wheel, and has 6 buttons. Each button has a different electrical resistance, and you have to press each button, and then associate a Short Press and a Long Press, on that button, to a specific action.
The controls like Volume + and - and Track + and - and Mute are pretty standard.
The only other button I have is the Mode button, and I assigned that to the "Mode" action in the settings. However the Mode operation, cycles though a predefined list.
So I simply reassigned the Mode button to the Home action.
I did try a few other things, like seeing if I could press 2 buttons at the same time e.g Mode and Track +, but it either treated this as a press on the Mode button or a press on the Track + button. So that didn't work.
If I get time, I'll have another go at decompiling the system apps, but last time I tried to do that, I could not see anything that looked like the list of apps.
If I had programmed it, I'd probably put the app names into a string resource, but goodness knows what the programmed did who wrote the system apps in these units.
RogerClark said:
In the Settings, ( think its in the Car) section, is the setting (app) which allows you to associate specific steering wheel buttons with specific actions.
Click to expand...
Click to collapse
Thanks for the quick reply. I already tried the factory settings but my steering wheel buttons won't work there. I only can set action to the buttons on my radio. Sadly I have to wait for any other solution. But thanks again for sharing your experience :good:
What brand and model of HU do you have?
Hey,
Opel/Vaux/Chevy cars have canbus hard mapped buttons.
Mine can't be configured through the in-built apps or factory settings either.
One would have to examine the canbus.apk / MTCManager to maybe update the xposed for MTCDTools.
MTCD Tools can see the button codes (3 digits), but can't map any other function or even intercept.
---------- Post added at 16:43 ---------- Previous post was at 16:43 ----------
Hey,
Opel/Vaux/Chevy cars have canbus hard mapped buttons.
Mine can't be configured through the in-built apps or factory settings either.
One would have to examine the canbus.apk / MTCManager to maybe update the xposed for MTCDTools.
MTCD Tools can see the button codes (3 digits), but can't map any other function or even intercept.
RogerClark said:
What brand and model of HU do you have?
Click to expand...
Click to collapse
I have a Xtrons PB78QSFP-B which is designed for a Ford Focus and came with a standard canbus adapter for ford. But I have the old model of the HU which has only 2GB Ram not 4.
My guess is, that Ford has hard mapped buttons too, like Xorit said it about Opel/Vaux etc
update guys! mtcdtools will do the trick! though the old mapping will flicker but still the newly assigned actions will prevail.
i can live with this already. maybe ill just find the solution to delete the factory set MODE actions :laugh:
slidefriday said:
update guys! mtcdtools will do the trick! though the old mapping will flicker but still the newly assigned actions will prevail.
i can live with this already. maybe ill just find the solution to delete the factory set MODE actions :laugh:
Click to expand...
Click to collapse
Did your have to root your unit or install anything like Xposed etc? Or does it just work with the stock firmware?
works with stock fw. im not yet doing any firmware mods
slidefriday said:
works with stock fw. im not yet doing any firmware mods
Click to expand...
Click to collapse
Good to know
I've installed MTCE_GS_V3.01_3 head unit, and while steering wheel buttons work fine, the central panel buttons are no go.
I'm certain I've connected every cable that was connected on the original installation.
I've seen some suggestions on youtube to reset the panel button list, and then choose key study to add all buttons anew, however that does not help.
Right now Can bus type is set to 55 GM Simple, and that's probably the only one that works with steering wheel buttons.
I've tried changing knob type and other settings to no avail - I do full restart after the change, but when in key study no button press makes a difference.
Are there any suggestions what other settings should I try changing, or is there a way to check if a buttons press sends any signal at all?
You seem to be mixing/confusing steering wheel key assignment with the touch key assignments. These are two very different things. Canbus has nothing to do with the touch keys.
There is a touch sound setting that will cause the unit to beep every time one of the touch keys are touched. Please have a look at my instructional tutorial on how to set the touch keys:
How to reset the touch buttons instructional
This thread is not asking how to reset the touch buttons down the side of the panel screen. First go to Settings... Car.. Factory settings.. password 126 Then touch Key study category at the top Next Touch Key Study First the system will want...
forum.xda-developers.com
Hope this helps.
jlbooth said:
You seem to be mixing/confusing steering wheel key assignment with the touch key assignments. These are two very different things. Canbus has nothing to do with the touch keys.
There is a touch sound setting that will cause the unit to beep every time one of the touch keys are touched. Please have a look at my instructional tutorial on how to set the touch keys:
How to reset the touch buttons instructional
This thread is not asking how to reset the touch buttons down the side of the panel screen. First go to Settings... Car.. Factory settings.. password 126 Then touch Key study category at the top Next Touch Key Study First the system will want...
forum.xda-developers.com
Hope this helps.
Click to expand...
Click to collapse
I'm not sure we're talking about the same things, correct me if I'm wrong.
I'm talking about these buttons basically:
https://a.allegroimg.com/original/033b49/7f4f25564315ad7abd6afb6da117/PANEL-RADIA-OPEL-INSIGNIA-CD300-13273252
To my understanding (until now) they should be configured using Panel key study?
elmmm said:
I'm not sure we're talking about the same things, correct me if I'm wrong.
I'm talking about these buttons basically:
https://a.allegroimg.com/original/033b49/7f4f25564315ad7abd6afb6da117/PANEL-RADIA-OPEL-INSIGNIA-CD300-13273252
To my understanding (until now) they should be configured using Panel key study?
Click to expand...
Click to collapse
That looks like the control panel for the original radio.... and probably connected DIRECTLY to the original radio. Unless they operate through can bus, I don't think you can configure those.
I've seen them working on YouTube videos and such.
Agree with @Bob_Sanders on this. I was under the impression that it was just touch buttons off to one side of the head unit screen like many of these head units.
I suggest reaching out to the manufacturer of the radio with your question regarding the button panel.
elmmm said:
I've seen them working on YouTube videos and such.
Click to expand...
Click to collapse
Then it's possibly connected through can bus and you MIGHT get it working if you connect up your Key1 and Key2 wires and try the key study again.
I'm not sure if you have a can bus box on there already. If you do I'm not sure if you can run the box AND the key1/2 wiring at the same time. Try it though.
Bob_Sanders said:
Then it's possibly connected through can bus and you MIGHT get it working if you connect up your Key1 and Key2 wires and try the key study again.
I'm not sure if you have a can bus box on there already. If you do I'm not sure if you can run the box AND the key1/2 wiring at the same time. Try it though.
Click to expand...
Click to collapse
Can you clarify please what do you mean by "the box"?
Hello everyone.
I could not find a MTCE section and was unsure where to post, so I am posting this to the MTCD/MTCB/Android Head-Units threads. Sorry mods, please close or merge as you see fit.
I have a PX5 running Android 10. MCU version is MTCE_HXD_V3.62e_1 and would like to assign a phisical button (preferably a steering wheel button) to open TorquePro.
I found the remap function on factory options, but there are two problems with this:
First, only the volume buttons on my steering wheel show up on the buttons list, and not the "mode" button I wanted to use for this. Maybe this has something to do with CAN-Bus configurations? Or should I reset and map the buttons manually in order for them to show up? I think they all work. This "mode" button I don't use currently cycles between radio, media player and DVD and the skip track buttons also function as supposed, although being absent from the list.
Second, even if I forget about the steering wheel and try to map it to one of the buttons on the unit itself (like the DVD button I don't use) I can only map preset functions, like navigation, DVD, mute, etc. and not individual apps.
So I need either a third-party app that allows me to map Torque to a button, or a way to add torque to the mapable funcions on the factory options.
Any thougts on how to do this?
BTW, I tried MTCDtools but it doesn't seem to work. All I get from it is a "app keeps crashing" error message.
Thank you all!
Yes mtcE is an mtcD type. So you're in the right place.
All right, one step in the right direction. Yet MTCDtools didn't work. I installed the APK and it doesn't even open, all I get is a crashed app error message everytime I try starting it...
Any ideas what is going wrong here?
Have you tried the modified version 1.10, from AirOne70? #493
Not yet, just the one from f1x's GitHub. Will try it today. Thank you.
Pavel-71 said:
Have you tried the modified version 1.10, from AirOne70? #493
Click to expand...
Click to collapse
I have tried it, and it worked, so thank you!
Although it was just a partial success. I have a "source" button on my steering wheem which is used to cycle through radio/DVD/media player/etc. and managed to make it open Torque, like I wanted. The problem is that it also mantains the original function, so it launches Torque AND changes the media source on the same time.
I guess I need to "disconnect" the original functio. Any ideas on how to do this?
Thank you!
DC69 said:
I have tried it, and it worked, so thank you!
Although it was just a partial success. I have a "source" button on my steering wheem which is used to cycle through radio/DVD/media player/etc. and managed to make it open Torque, like I wanted. The problem is that it also mantains the original function, so it launches Torque AND changes the media source on the same time.
I guess I need to "disconnect" the original functio. Any ideas on how to do this?
Thank you!
Click to expand...
Click to collapse
Unfortunately, I can't help you with that, try reading the thread, maybe someone has already solved it.