Related
I noticed after playing a bit with my TF that the auto-brightness is a bit too dim than what I'd like. Definitely not nearly as bright as my EVO, iPad, or Nook Color. I ended up setting it fixed at half brightness. Anyone else agree/disagree?
I agree, it's a bit on the dark side but its not too bad.
Autobrightness is calibrated poorly on pretty much every device unfortunately, I'd guess the Transformer isn't all that different.
http://www.displaymate.com/AutoBrightness_Controls_2.htm
I think the TF's screen is just dimmer as a whole (this is compared to my iPad 2). I don't mind it when doing things like surfing and email, etc. It only bothers me when I'm watching a movie because I have it set to about 90% brightness, which is pretty much even with my iPad 2 set at 60%, and the light bleeding is more apparent on the TF when set to that (this also makes the little home task bar buttons on the stock movie player more apparent as well. Why can't there be a movie player that just shows the movie and nothing else?)
I guess it makes sense though since the TF screen is bigger than the iPad 2's. Like in TV's; the smaller the screen, the brighter and better contrast they'll be.
I saw this also. I have auto brightness turned off and have it 1 click before max brightness.
I wonder if it could be dirt or grime covering the sensor next to the camera?
akarol said:
I noticed after playing a bit with my TF that the auto-brightness is a bit too dim than what I'd like. Definitely not nearly as bright as my EVO, iPad, or Nook Color. I ended up setting it fixed at half brightness. Anyone else agree/disagree?
Click to expand...
Click to collapse
I agree. I don't know why they don't let user pick the initial brigtness and based on that, adjust the lighting. It seems like an easy thing to do.
nxp3 said:
I agree. I don't know why they don't let user pick the initial brigtness and based on that, adjust the lighting. It seems like an easy thing to do.
Click to expand...
Click to collapse
I thought it never went below the value you set it at just prior to turning on AUTO.
IE- If you have it set at 50% and turning on auto it'll never go below the 50% mark.
I haven't messed about with auto since my first firmware so maybe they changed this in later ones.
jimbob1971 said:
I thought it never went below the value you set it at just prior to turning on AUTO.
IE- If you have it set at 50% and turning on auto it'll never go below the 50% mark.
I haven't messed about with auto since my first firmware so maybe they changed this in later ones.
Click to expand...
Click to collapse
I'm pretty sure it's reverse, as in you set the bar to the highest setting you want and it adjusts to the room settings without exceeding the highest point you set. That's how it works in my iPad 2 at least.
Edit: This is, indeed, how it works on the TF
songmeesay said:
I'm pretty sure it's reverse, as in you set the bar to the highest setting you want and it adjusts to the room settings without exceeding the highest point you set. That's how it works in my iPad 2 at least.
Edit: This is, indeed, how it works on the TF
Click to expand...
Click to collapse
Not true. I just set mine to the lowest setting, then turned on the auto. It still brightens when there is light present.
If you start testing with auto brightness, one thing that you need to be aware of that makes it hard to test is that the TF checks to see if it should increase brightness frequently, but it only checks to reduces brightness after the screen goes to sleep or a power off. So once it is bright it seems to stay that way.
dmeehl said:
Not true. I just set mine to the lowest setting, then turned on the auto. It still brightens when there is light present.
Click to expand...
Click to collapse
I stand corrected. Looks like Auto, truly is, auto no matter where you set your point in the bar. I just set it on the highest and then hit auto and went into a darker part of the room and it did dim the screen down, and I did the reverse like you did and it adjusted brighter in a higher lit part of the room.
brachiopod said:
If you start testing with auto brightness, one thing that you need to be aware of that makes it hard to test is that the TF checks to see if it should increase brightness frequently, but it only checks to reduces brightness after the screen goes to sleep or a power off. So once it is bright it seems to stay that way.
Click to expand...
Click to collapse
I don't know if that is true, because if that was the case, it should be brighter most times. and less likely to dim, but I'm having the opposite effect.
So what's the final verdict. Will AB limit itself to whatever manual brightness you had set as the max or min?
akarol said:
So what's the final verdict. Will AB limit itself to whatever manual brightness you had set as the max or min?
Click to expand...
Click to collapse
From the testing I did, AB bypasses any setting you put on the bar and just adjusts to room light conditions.
I just bought a B60 serial TF and it has the dim auto brightness issue too.
I have also experienced this dimmer than what I want the brightness to be when I set to auto issue. So I revert back to the default brightness setting that came with Android 3.1. Much better on my eyes.
Hi all
I am having a strange issue with my Nexus 5, so I was wondering if anyone else has experienced this:
Auto-brightness is off, brightness is set to maximum. Every now and then, as I am using the phone, the brightness would change. It would go slightly darker, and then sometimes after some time (minutes) slightly brighter again (back to maximum). When this happens, the actual brightness settings slider does not change, it's always saying 100%. I've tried to notice some pattern in the occurrences of this issue, but so far cannot identify any steps to reproduce it. It is easily spotted when the screen has a big area of a solid colour, e.g. on a web-page's white space. So most often I see it while scrolling a news website. Note that during these brightness changes, my environment's lightning does not change (auto-brightness is off anyway, so this should not matter).
I don't even know if this could be down to a software or hardware issue.
So, anyone had similar problems?
Thanks,
Nik
It's throttling (overheating)
Found a related thread
Thanks supersain08 for your answer. Now using this term, I found this thread:
http://forum.xda-developers.com/showthread.php?t=2516915
sovata said:
Thanks supersain08 for your answer. Now using this term, I found this thread:
http://forum.xda-developers.com/showthread.php?t=2516915
Click to expand...
Click to collapse
How can you use the brightness at maximum on this phone? This phone has one of the brightest displays I've ever seen. At 30% or so it's brighter than most phones on full.
Synyster06Gates said:
How can you use the brightness at maximum on this phone? This phone has one of the brightest displays I've ever seen. At 30% or so it's brighter than most phones on full.
Click to expand...
Click to collapse
Well I think that's beside the point, but let's say it's a personal preference.
And also it is possible that one would like to have a 100% brightness in light/sunny conditions, so then this issue could become relevant for anyone.
Last time I used 100% brightness on a phone screen was on the first days of my gnex.
Displays are in indoor situation much too bright on 100%, brigther doesn't look better all the time. I am going with Auto-Brightness (to have it at 100% in outdoor situations) but it is still to bright in low light situations. I have to wait for a customrom to adjust this like I did with the gnex.
Can not understand how people can use it at 100% all the time.
Why do you feel it's necessary to argue whether 100% brightness is useful or not?
That's not the point of the original question.
supersain08 said:
It's throttling (overheating)
Click to expand...
Click to collapse
I've been having the same issue; glad to know it isn't a defect, and that it's supposed to do that. Thanks for the information
I think I've gotten too used to this feature on my old Note 4 with CyanogenMod, because I really miss it on my V20.
I just got the phone today, and so far, I really enjoy using it. But I'm having trouble with the lack of adaptive brightness. I like to have my phone screen dark (dark themes, low brightness, etc), battery saving or not. With adaptive brightness, I could set the brightness slider pretty low, and still have automatic adjustments; the screen would just be darker in brighter light than it would be on a higher setting.
It looks like LG got rid of this and put the old auto brightness back. I know most people prefer this, but I do not. The screen is just too bright for me. Is there any way to get adaptive brightness on here, preferably without root?
H918 (TMO)
Check out this thread for some ideas.
http://forum.xda-developers.com/v20/help/auto-brightness-t3490880
pbelcomp said:
Check out this thread for some ideas.
http://forum.xda-developers.com/v20/help/auto-brightness-t3490880
Click to expand...
Click to collapse
It looks like Lux is the only option. I've used it before and never really enjoyed it. I installed it anyway but brightness is really jumpy. I guess I have to hope T-Mobile adds it back in.
Zacharee1 said:
It looks like Lux is the only option. I've used it before and never really enjoyed it. I installed it anyway but brightness is really jumpy. I guess I have to hope T-Mobile adds it back in.
Click to expand...
Click to collapse
You need to adjust the settings. You can tell the app how quickly/slowly to ramp up/down the brightness. How much of a change in brightness is required before the change is actually made (so the screen isn't jumping around by 1% every time you move it in your hand). You can set brightness levels for certain ambient light levels, all to your choosing. It takes a little bit of time to dial it in, but it's far better than the garbage auto-brightness LG uses. I too miss the built-in adaptive brightness.
Rate this thread to express how well you can see the OnePlus 6T's display outdoors. In case you've been playing Minecraft for 18 months straight, you might not known how to get outside anymore. Well, find the door and walk through it. A higher rating indicates that it has very high maximum brightness and thus fantastic outdoor visibility in direct sunlight.
Then, drop a comment if you have anything to add!
Ok well here I go, I see a ton of views in this section but no comments.
First of all, I'm coming from a Moto Z2 Play and a OnePlus 3T:
The screen brightness of the OnePlus 6T is the major letdown I ever had, it is miserable, sad, despicable... Here is the deal, if I set the screen to 100% brightness in the O6T, it equals to anywhere around 85% or less of the max brightness in my 1 year old Moto Z2 Play !! also, the OnePlus 3T is brighter than the O6T by a tiny notch, but I have to add that my OnePlus 3T is 2 years old and noticeably lost its max brightness, but it still beats the O6T!!!!
If you are wondering about my device, I went to 2 T-mobile stores in the area and compared brightness, they are the same as my unit, so it is safe to say that the O6T is a disappointing device when it comes to screen brightness...
I will edit this post if I get more info or if I need to correct something.
Does the Oneplus 6T support a HDR10 display?
I had the Xiaomi Mi8 Pro and that did.
Looks good on maximum brightness, or very close to it, but anything else looks quite dim.
I must say that the screen is quite dim. I have to keep the phone at 65% or more while indoors to get good visibility from the phone. Not sure what that's about, but highly disappointed.
i found the built in ambient brightness kept setting a little dark and was slow to react to going out into sunlight. switched to velis auto brightness and it is fine now.
thanks for the comments. Was comparing this phone to a couple of others for a blackfriday purchase. Sounds like this one is hard to view outside.
jake21 said:
thanks for the comments. Was comparing this phone to a couple of others for a blackfriday purchase. Sounds like this one is hard to view outside.
Click to expand...
Click to collapse
I have zero issues with mine in direct sunlight.
I had to get ElementalX's HBM app to uncover the hidden 40%+ brightness of the screen.
geminium said:
I had to get ElementalX's HBM app to uncover the hidden 40%+ brightness of the screen.
Click to expand...
Click to collapse
I dont know this app, yet. Does this app work on OnePlus 6T without rooting it?
Puddies said:
I dont know this app, yet. Does this app work on OnePlus 6T without rooting it?
Click to expand...
Click to collapse
My apologies I didn't mention it. It has to be rooted
I find the screen itself bright enough. Just the auto brightness is a bit aggressive and can set it too low
But the auto brightness is learning!
It was constantly to low on my phone too. But I dragged it higher every time it was to low. After 1 week of annoying adjusting, it's working fine now!
For those who complains that they have to dial up the brightness slider:
I was like you too, complaining about the auto brightness. However, it has now changed to "adaptive brightness", meaning it learns from your preference. Just turn it on and manually adjust when the auto adjustment doesn't suit you, after a week or two it will get better thanks to machine learning in the system that will learn your preferences.
Also, I remember reading somewhere that the brightness slider now adjusts the brightness in a logarithmic scale instead of linear on older versions of Android.
You can read more about adaptive brightness from an article by Android Authority:
https://www.androidauthority.com/android-pie-adaptive-brightness-927080/
(Also if you are interested, and geeky enough , you can read this excellent article on Android Pie's logarithmic brightness curve here: https://medium.com/@Tunji_D/reverse...ies-logarithmic-brightness-curve-ecd41739d7a2)
The screen brightness is great indoors but not bright enough (even with auto brightness off and on the max setting) for use outside on a sunny day.
Anyone who says otherwise isn't being honest with themselves, with us or possibly both.
jeff7424 said:
For those who complains that they have to dial up the brightness slider:
I was like you too, complaining about the auto brightness. However, it has now changed to "adaptive brightness", meaning it learns from your preference.
Click to expand...
Click to collapse
Ha! I wondered why I was so much less annoyed with the auto brightness in the last couple of weeks. Thanks for the tip!
Gotta say, have loved the battery life. I like my screen bright and for a while it forced me to behave.
geminium said:
I had to get ElementalX's HBM app to uncover the hidden 40%+ brightness of the screen.
Click to expand...
Click to collapse
have you a link for this app please?
gege0202 said:
have you a link for this app please?
Click to expand...
Click to collapse
Here we go
https://play.google.com/store/apps/details?id=flar2.hbmwidget
geminium said:
Here we go
https://play.google.com/store/apps/details?id=flar2.hbmwidget
Click to expand...
Click to collapse
thank you and what setting do you use?
gege0202 said:
thank you and what setting do you use?
Click to expand...
Click to collapse
You're welcome.
Nothing's fancy with the settings, I think I just made it auto (I believe everything's is by defaults)
I was really hoping OnePlus has resolved this issue, it did it on the 6, the regular 6T and the McLaren. Anyone else experiences this? Where the phone just won't adjust? For example you walk outside and it takes it almost a couple min to kick the brightness into full gear. Another example is let's say you're laying in bed in the dark and all of the sudden it kicks it into full brightness and then slowly goes back to a more comfortable one. My S10+ never did such things, nor did it have problems quickly adjusting, if it did it was instant.
Yeah, I've noticed this as well. It's annoying.
Sent from my GM1913 using Tapatalk
yes, it's horrible. I have to manually adjust brightness now
Yes! It's terrible
Sometimes it does adjust but does the EXACT opposite of what it should.
Go into bright light and it drops it to minimum brightness or blind me when it's dark
Would be nice if there is a way to fix this, or adjust. I'm looking at returning the phone, I couldn't stand that on the 6T.
Turn on adaptive brightness and change it whenever you want, it will learn over time. Mine did since I've had it since launch and it was awful, but now works great.
Root, Lux, done :good:
Anyone know where the proximity/light sensor is? Not sure where it is but the phone screen does turn off when you put it neae your face during a call.
I have the same issue and just like you I was hopong they fixed it since my last OP phone was the OP6. Can't believe they haven't fixed it in over a year. This is my only con about this phone but it is almost a deal breaker, yeah fingerprint sensor is incredibly fast compared to my S10+ but that doesn't matter if I have to do the extra step of manually adjust brightness every time I unlock the phone
Android Pie's adaptive brightness comes with auto-learn feature (which I hope was not disabled by OnePlus devs). So while having adaptive brightness enabled simply adjust brightness manually every time you want it to be different. It'll learn and improve over time.
Pfeffernuss said:
Root, Lux, done :good:
Click to expand...
Click to collapse
Do You mean this one?
https://play.google.com/store/apps/details?id=com.vito.lux
C3C076 said:
Android Pie's adaptive brightness comes with auto-learn feature (which I hope was not disabled by OnePlus devs). So while having adaptive brightness enabled simply adjust brightness manually every time you want it to be different. It'll learn and improve over time.
Click to expand...
Click to collapse
Knowing OnePlus they probably removed it haha
Pfeffernuss said:
Root, Lux, done :good:
Click to expand...
Click to collapse
Lux was amazing before Android had native adaptive brightness. It's ancient now. Hasn't been updated in over 3 years because it's obsolete (sadly). I wouldn't use this any more.
News flash people. Auto brightness is a horrible feature in general on any phone. Especially when you can have full control over the brightness level from the quick settings pulldown.
338lm said:
Lux was amazing before Android had native adaptive brightness. It's ancient now. Hasn't been updated in over 3 years because it's obsolete (sadly). I wouldn't use this any more.
Click to expand...
Click to collapse
Hahaha sure. Because of a full wipe "had to" use the stock automatic brightness for a few hours. Well, that was a nice heads up.
Adaptive brightness is completely useless. But, to each his own. Now fully enjoying my custom Lux setup again.
Anyone confirms the adaptive brightness work well after several days? I must use Lux because of this terrible auto brightness on Oneplus. LG V40 has very good auto brightness.
starrynighthn said:
Anyone confirms the adaptive brightness work well after several days? I must use Lux because of this terrible auto brightness on Oneplus. LG V40 has very good auto brightness.
Click to expand...
Click to collapse
For me it works pretty good after using the phone for a couple of days. There are still minor adjustments to do, especially when going from bright sun into a dark room (for me the system sets the brightness too high, but nevertheless it adjusts pretty well and goes very low).
Using this accessibility one handed menu makes things a bit easier
it takes so long, usually i click the auto brightness icon twice to make it work
It seems a little slow catching up...