Hi guys,
I'm using the S3 a lot for tracking my running and that's going pretty good. Really good actually. Satellites are locked super fast, in 4 or 5 seconds and tracking is accurate.
Today I tried the cycling activity. Unfortunately it does not track kms. Time and heart rate are logged but no distance.
I tried multiple times, satellite is locked, the program is running, time is ticking.
Does anybody have any experience, do I forget to do something?
Nobody tried cycling mode?
Not intentionally, a couple of times driving the S3 has decided I am cycling and offers encouragement.
If you start it manually I recall it has ALL the distance details, including a summary map. I don't think you get that if it senses a ride and starts automatically.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Well, I started it as an activity, so manually.
I'll do it again in a bit, see what happens.
With auto detecting it doesn't seem to use the GPS, like running is detected fine but no track logging.
Update : 1 just cycled 200 meters and it tracked 170. First 30 locking the satellites.
So... Why it didn't do anything yesterday, trying a bunch of times, booting in between, beats me. Maybe it's today's health update?
I'm having the same problem, walking tracks distance covered, but Cycling doesn't. Calories and time were tracked, but not distance. Really disappointing.
I use my Gear S3 to track my cycling activity all the time.
I go to the S Health app on the watch, set activity type to cycling then set a "target" based on how far I plan to cycle.
Whilst in the setup part of the watch app there are selectable options for "location" (make sure you are selecting this or it won't track where you are, which may be why you're not getting distance?)
I also select "auto pause" to pause tracking if I stop cycling. I then scroll up to the top and hit Go.
After a 3 second countdown it starts tracking my ride.
If I stop cycling briefly (at red traffic lights etc) the watch automatically pauses tracking. When I start riding again it automatically starts tracking again.
At the end of the ride I simply choose finish on the watch and confirm I wan't to finish.
It then syncs all manner of information with my phones S Health app including:
A map of the ride showing my route
Total distance (which is always with a few metres of my Cateye bike computer)
Total duration (e.g. the total time from starting the watch to hitting finish, including time the watch paused due to me being stationary)
Workout duration (the time I was actually moving)
Average & maximum speed
Average pace & maximum pace
Lowest & highest elevation
Total ascent & decent
Average & maximum heart rate
Workout calories & total calories
Weather
There is also a Selectable option to show the whole ride on a graph broken down by up to 2 options from speed/heart rate/elevation
When I used to rely on the Gear S3 workout detection to pickup my cycling, the information available at the end was very limited.
It works brilliantly when I set it manually before my ride (and only takes a few seconds too)
Do you have your phone with you while you cycle?
As I understand when your watch is connected to phone it uses phone for location.
I had a same problem and after I turned location on phone Off and than back to On problem disappeared.
Not sure if this is your problem but it is worth a try
Is there any way to adjust the step length? Without that the step counter is a toy as my steps are probably 30% longer than a shorter person's.
Hi,
I have my Huawei watch 2 for two months now and I like a lot of features, but on the other hand I am quite disappointed that some features which I know from other devices are missing... Now I am looking for setting or some app which will beep/vibrate every time I get in a get out of desired hr zone. I had this on my sporttester: 1 beep -enter zone 1, 2 beeps - enter zone 2, 3 beeps - enter zone 3, how simple. But I cannot find anything similar for Wear OS...The only settings I can find is HR limit warning ( https://consumer.huawei.com/en/support/faqs/detail/?id=137396 ), but I am more interested in reporting entering the hr zone...any ideas?
Thanks!
A few days ago when I was doing absolutely nothing all day, I got about 12 minutes somehow on the 30 minute "moderate to high intensity" fitness ring but i've no idea how as every day otherwise, including today, it stays at 0.
I just went for a 45 minute run, keeping my heart rate in the aerobic and anaerobic zones - on the Huawei Health app on the phone (which oddly displays a slightly different number of steps) the ring is completed and says 41 minutes. On my watch.... still 0.
The app is connected to the watch, which is listed under "Me -> My Devices"
Any idea what's going on?
Restarted the watch, no difference.
Did a "clear data" on the app on the watch. Now the green ring works but the blue one (steps) doesn't (it stopped at 292 for some reason) - meanwhile on the phone, which has clearly synced with the watch as it has my exercise record from my 5 mile walk, it says I've done 10000 steps but 0 minutes.
Guess I'll just ignore the rings then if they're buggy, which is a shame as they're a nice feature. Alternatively might look into selling this thing and going for a Galaxy watch.
Wondering if anyone else is facing this. My Gear S3 Frontier's HR monitor works perfectly alright in normal circumstances ( I have it set to always-on).
However, when I record a workout manually with S Health (mostly runs or rides), the heart rate recorded is very erratic. The watch would record the HR maybe 10 times during a 1.5 to 2 hours workout. That's it. Wondering if anyone else has had this issue, and how they solved it.
Some more info:
- I have the latest software for Frontier
- I have tried several times with and without a phone
- I have reset the watch multiple times
- I have also tried using third party apps like Gear Tracker, and Sporty Watch. The HRM works well in these cases, but the watch frequently freezes/reboots if I get a call or when I try to switch tracks on Music.
Attaching an example screenshot of a ride to show what I mean.