I have this s8 Plus smg950u stuck on the Samsung logo, I cant boot into recovery mode and it doesn't shut off. I can boot to download mode but odin doesn't recognize it, I've tried different cords and all but still the same issue. if I connect another s8+ in download mode odin recognize it just fine. Is there any way to fix this phone if my computer wont recognize it at all?
thanks in advance.
Maybe it's a driver problem?
You could try to use Samsung Kies
zate27 said:
Maybe it's a driver problem?
You could try to use Samsung Kies
Click to expand...
Click to collapse
I've tried that but computer doesn't detect it, if I check on device manager it looks like nothing was plugged in. I have 2 computers running windows 10 and non of them is able to recognize my phone.
Any suggestions?
Hi did you find a solutions to this problem? im having the same problem
Related
So in attempt to find my way to cyanogenmod 7 today i managed to brick my phone using odin3 one click. i was able to get my phone back into download mode after reading a few tips. so my new problem is my computer saying "usb device not recogniced. one of the usb devices on this computer has malfunctioned'. i've tried reinstalling the samsung drivers for my captivate and that doesnt seem to fix the problem. Any ideas? And if i can get odin to recognize my phone, should i master clear everything before trying to flash it back to stock?
Re-install the drivers and try again. Be sure to have the ODIN 1 Click open before connecting your phone in download mode.
also try different USB ports. wouldn't be the first time a port caused a connection problem.
im stuck on the samsung galaxy s 19000 boot screen and i can go into download mode but not into recovery... but the problem is that i cant get my phone to connect to computer thru kies or anything and i tried using another cable and computer...can anybody help me plaese??
Did you install the drivers for your phone on the computer? I was in a similar situation with a Samsung fascinate. I got stuck on a boot/flash loop. What I did was look for the phones drivers, installed them on the computer, get it into download mode (with the android shoveling), looked for the Odin software, looked for the fascinates factory rom, and flashed it through Odin.
Sent from my ADR6300 using XDA App
yea i installed the drivers and reinstalled them but it still says usb device not recognized and on device maneger says unknown device and i dont know waht to do.. if it at least get it to connect once i will be very happy
Please help me... i try to install other roms but after that i cant access recovery mode all i can do is to go to download mode.. the problem is my usb debug is turn off now my computer cant recognize my phone/usb driver... anyone here know how to fix my problem please help me:crying:
First, what phone, exactly from under the battery sticker.
Second, what did you do to boot loop it.
Third, you don't need USB Debug mode to fix it, you need Download mode, which if it boots even to loop, download mode will work.
getochkn said:
First, what phone, exactly from under the battery sticker.
Second, what did you do to boot loop it.
Third, you don't need USB Debug mode to fix it, you need Download mode, which if it boots even to loop, download mode will work.
Click to expand...
Click to collapse
my phone is samsung galaxy s 4g model: SGH-T959V
I install IceCreamSandwich Accidentally now my phone keep restarting
Yes i can go to download mode the problem is my computer always saying unknown drivers but i got all the drivers i need i read to the forums that when using odin and SDK something like that the phone should be on USB DEBUGGING MODE "ENABLE" so thats why I THINK that my computer cant recognize my phone... pls help me how to fix this thanks in advance
Was having a similar USB driver issue. What worked for me was re-starting the whole process on a different computer. Installed drivers via Samsung Kies mini and that did the trick for me.
Odin never cared if I was debugged on for me..
Odin and the one clicks, that's another story. They don't play nice together on same machine. I would need to revert drivers or completely uninstall & reinstall drivers when switching between. If you're getting Andy & shovel, this is fixable.
My best guess is to use heimdall with stock firmware as I always have an issue with already rooted stock.
Sent from my SGH-T959V using xda app-developers app
Same issue with my Samsung Galaxy Captivate
thonzie11 said:
Please help me... i try to install other roms but after that i cant access recovery mode all i can do is to go to download mode.. the problem is my usb debug is turn off now my computer cant recognize my phone/usb driver... anyone here know how to fix my problem please help me:crying:
Click to expand...
Click to collapse
Hi, I am facing the same problem with my Samsung Galaxy S mobile. Please let me know if your problem has got resolved.
Thanks in advance !!!
I usually keep flashing ROMS.
This time in sheer confidence I didnt charge the battery full.
I was switching from mokee 4.4 to CM11.
I wiped everything for a fresh install and unfortunately CM11 didnt install.
The tab restarted and now it wont go into recovery. what just happened?
It is just showing logo and I cannot get into Odin more either.
The tab had about 30% battery when it shut off and I cannot reach a charger for it for the next 4 hours.
Can I switch it off in any way to save battery?
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
devarshi84 said:
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
Click to expand...
Click to collapse
Try charging it when you have time and then try re flashing the stock Rom before taking it to service center
will the tab 2 charge without a recovery or ROM in place?
devarshi84 said:
will the tab 2 charge without a recovery or ROM in place?
Click to expand...
Click to collapse
I think it should
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
devarshi84 said:
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
Click to expand...
Click to collapse
Try reinstalling drivers
@shsagnik : Thank you very much for helping out.
I got installed all drivers by using the other P3100. But when I connect the bricked p3100, pc doesnt install MTP USB drivers. Under device manager it says " failed to start".
ODIN doesn't recognize it. either.
My mistake was I flashed everything on the phone including the internal memory.
PS: Can I force ODIN to recognize my phone?
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
devarshi84 said:
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
Click to expand...
Click to collapse
Awesome, now please change the title to solved
I have an original Samsung S7. It wont boot up. It is stuck on splash screen.
I can somtimes get it to boot up in Odin Download mode, but I cant get it connected to the computer with Odin and Samsind drivers installed. The computer does not react when I connect the phone. And I have tried several computers and cables. I use Windows 10
This problem occured over the night. The phone had standard FW. Maybe there was a FW update that failed?
It is a Telenor branded Samsung SM S7-G930F
Is there any hope to get this phone alive again ?
Stig-Arne said:
I have an original Samsung S7. It wont boot up. It is stuck on splash screen.
I can somtimes get it to boot up in Odin Download mode, but I cant get it connected to the computer with Odin and Samsind drivers installed. The computer does not react when I connect the phone. And I have tried several computers and cables. I use Windows 10
This problem occured over the night. The phone had standard FW. Maybe there was a FW update that failed?
It is a Telenor branded Samsung SM S7-G930F
Is there any hope to get this phone alive again ?
Click to expand...
Click to collapse
Please post screenshot in download mode so we can help you