I had an update start on my gear S3, and I realized after a while it was apparently in a boot loop.
I tried a reset and that didnt work.
I got into the boot menu and got it into recovery, but that didnt boot wither. One time it said resetting but again stopped doing anything.
Anyone have any suggestions on a fix?
Model Name is important to know...
So you can try to flash Firmware with netOdin...
SM-R760?
SM-R765A?
Or something else?
Best Regards
Its model
SM-R760
adfree said:
Model Name is important to know...
So you can try to flash Firmware with netOdin...
SM-R760?
SM-R765A?
Or something else?
Best Regards
Click to expand...
Click to collapse
netOdin + Instruction + Videos:
https://forum.xda-developers.com/showpost.php?p=73503787&postcount=150
Tizen 3 CQL1 Firmware for SM-R760 is here:
https://forum.xda-developers.com/gear-s3/development/rom-samsung-gear-s3-sm-r760-t3755374
Best Regards
Related
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Is csc is different check mine R765AATT1APJ8 mine also is att
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
dxzdxz1 said:
What could happen if I flash this CSC on my S3 Classic?
Since it's a US CSC I believe this could activate SPay on other S3 models
Click to expand...
Click to collapse
You will probably brick your watch since this is a firmware for LTE version
10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Even flashing only the CSC instead of the entire ROM?
dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
10urshin said:
You will probably brick your watch since this is a firmware for LTE version
Click to expand...
Click to collapse
Sword Fish said:
I have compared CSC versions with people who have Spay on their watches and found we have the same versions. I don't believe it is the CSC that activates*Spay installation. I have tried everything I can think of and nothing works.*I even tried GPS spoofing and that didn't work. It did install Spay into Gear Manager but not onto the watch.
Click to expand...
Click to collapse
Me too man. I did a full dump from my watch and compared to a friend who bought his watch on US (and is able to use SPay here In Brazil) and what I found was that SW_Configuration.xml inside CSC folder was different. Everything else is the same.
I've tried to change the file but the CSC folder is RO.
dxzdxz1 said:
Even flashing only the CSC instead of the entire ROM?
Click to expand...
Click to collapse
I thought you gonna flash the whole rom, idk what would happen if you flash only the csc partition let alone if it even get pass the md5 check on netodin.
Anyone in this firmware got the "Jansky Wearable" update?
Mine did not....
tids2k said:
Hello friends,
Please find the rom files lited below for this device. From now onwards I will include the PIT files in the same thread.
Please note this is for AT & T model.
ROM : AP_R765AUCU1APJ8 Google Drive
BOOTLOADER : BL_R765AUCU1APJ8 Zippyshare
MODEM : CP_R765AUCU1APJ8_CL367188_QB5111100 Zippyshare
PIT : Zippyshare
CSC : CSC_ATT_R765AATT1APJ8 Zippyshare
Click to expand...
Click to collapse
Zippylinks are dead. Does anyone have a copy?
@tids2k
@ others too, who allready downloaded these files
Please re upload files...
Zippyshare Links are expired.
Thanx in advance.
Best Regards
I will upload them again this weekend.
There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
There are tons of reasons to flash a phone or a tablet with a custom rom. Why would I flash my watch?
What does this rom have that the stock rom does not? It seems all that happens is Samsung Pay is disabled.
Click to expand...
Click to collapse
:cyclops:
1.
This Firmware is outdated + Links are expired...
2.
Are you really sure you know the difference between this Firmware and "Stock"?
Why do you think here is Custom Firmware?
This is Orignal "Service" Firmware for use with ODIN...
3.
Samsung Pay...
If you read other Threads/posts...
Their are enough what disable Spay crap...
4.
NO Custom ROMs for Gear S3 available... as PROTECTED against Modification...
Only as hint for you...
Best Regards
OK that's what I figured. Thanks.
I purchased a used Sm-765A and it is reactivation locked; I'm trying to restore it to factory settings, Can someone tell me where I can find the instructions and files to restore it to factory? Thanks for any help.
P.s. I tried downloading from the zippy links on this thread but files are not there
1.
This Firmware which is NOT fully downloadable is obsolete
Latest know """""""""""""""""""public"""""""""""""""""""""""""... official Version:
Code:
R765AUCU[COLOR="Red"][B]2[/B][/COLOR]BQD4/R765AATT[B][COLOR="Red"]2[/COLOR][/B]BQD4/R765AUCU[B][COLOR="Red"]2[/COLOR][/B]BQD4
Obsolete!
Code:
R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[B][COLOR="Red"]1[/COLOR][/B]APJ8
NOT try to flash... you can damage/brick your device! Thanx to Knox and Rollback Prevention...
2.
You have low chance to find Firmware...
3.
Reactivation Lock...
Look at youtube...
Few people offer "Service"... for SM-R760 and SM-R770...
BUT with SM-R765 is seems you will have NO luck...
Also no Combination Firmware for ATT and SM-R765A...
Really, you have no luck with SM-R765... we have more users with no luck:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Try to contact Seller, if he remember Samsung Account... or give him/her the watch back...
Best Regards
what does flashing with this ROM allow you to do?
Code:
R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AATT[COLOR="Red"][B]1[/B][/COLOR]APJ8/R765AUCU[COLOR="Red"][B]1[/B][/COLOR]APJ8
R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AATT[COLOR="Green"][B]2[/B][/COLOR]BQD4/R765AUCU[COLOR="Green"][B]2[/B][/COLOR]BQD4
R765AUCU1APJ8 is old and obsolete AND NOT for Flashing...
Risk to brick...
Rollback Prevention...
Software Revision is 01...
Rollback Prevention Security crap require 02...
Otherwise you have similar result like these:
https://forum.xda-developers.com/gear-s3/help/please-help-bricked-gear-s3-sm-r765s-t3665558
https://forum.xda-developers.com/gear-s3/help/sm-r765f-teardown-t3659431
Only as info.
Best Regards
Here is the link for the SM-R765A firmware: https://mega.nz/fm/l8sz2ZhY
Hi. I recently purchased a second hand Gear S2. I managed to connect it to a Huawei P10, but after turning off the bluetooth by mistake and re-enabling it, the watch asks to do a Factory Reset in order to connect with a device that was already connected with it before . After that, I managed to connect it with my older Glaxy A3 2017 and tried to update the software, but surprise, a pop-up shows saying "Your Gear has been modified. Software Update is not avaible.". Ideas how to fix that? Or this issue is because my Gear S2 (purchased second hand) is a Live Demo Unit?
Live Demo Unit
Click to expand...
Click to collapse
Look at Rear Case/Back Cover...
In theory you will find... NOT FOR SALE...
Anyway... if you know which exact model name...
SM-R720X
or
SM-R732X
or
You can flash Retail Firmware... via netOdin...
Better you choose correct Firmware, according to Model Name...
Only as info.
Best Regards
adfree said:
Look at Rear Case/Back Cover...
In theory you will find... NOT FOR SALE...
Anyway... if you know which exact model name...
SM-R720X
or
SM-R732X
or
You can flash Retail Firmware... via netOdin...
Better you choose correct Firmware, according to Model Name...
Only as info.
Best Regards
Click to expand...
Click to collapse
Yeah, it says Not For Sale. Model number is SM-R720X. Can you please give me a link for firmware download?
Check first Firmware on Device... with this Code:
Code:
*#1234#
Problem with LDU... Live Demo Unit
Since EPK5 it looks like Firmware detect LDU... and disable WiFi for use with netOdin...
And for valid FOTA use... you need "valid" Sales Code/CSC + Firmware Combination... otherwise you can again not update via Samsung FOTA...
Best Regards
adfree said:
Check first Firmware on Device... with this Code:
Code:
*#1234#
Problem with LDU... Live Demo Unit
Since EPK5 it looks like Firmware detect LDU... and disable WiFi for use with netOdin...
And for valid FOTA use... you need "valid" Sales Code/CSC + Firmware Combination... otherwise you can again not update via Samsung FOTA...
Best Regards
Click to expand...
Click to collapse
When entering the code *#1234#, the watch shows AP : R720XXU2AOIL and CSC : R720OXX2AOIL .
Also seem like the computer can find the AP connection from the watch and also it can connect, and netOdin does detect the watch too.
Try FIRST with older BOKK Firmware:
https://www.file-upload.net/download-12731427/smR720_BOKK_OXA.zip.html
Be carefully to download the 600 MB package... NOT any .EXE file.
I hope you will find netOdin + Instruction... otherwise ask...
Best Regards
adfree said:
Try FIRST with older BOKK Firmware:
I hope you will find netOdin + Instruction... otherwise ask...
Best Regards
Click to expand...
Click to collapse
OK, after that, what do I need to do next?
If you successfully flashed BOKK Firmware...
You can check if valid Sales Code/SCS is set... and you have your languages...
Because you have now OXX region Firmware... and I have only OXA BOKK...
If BOKK is on device... check via Phone if you get FOTA Update...
If not... then post result...
So we could try something... to make it "compatible"...
Best Regards
adfree said:
If you successfully flashed BOKK Firmware...
You can check if valid Sales Code/SCS is set... and you have your languages...
Because you have now OXX region Firmware... and I have only OXA BOKK...
If BOKK is on device... check via Phone if you get FOTA Update...
If not... then post result...
So we could try something... to make it "compatible"...
Best Regards
Click to expand...
Click to collapse
I successfully installed BOKK firmware and I have my language, which is in my case romanian, but in the Samsung Gear App, I still get the same error: Your Gear has been modified. Software updates are not available.
I still get the same error: Your Gear has been modified. Software updates are not available.
Click to expand...
Click to collapse
Do you know SDB Tool?
You are able to work with it?
We could try to identify, why Gear Manager App detect some Modification...
Maybe they increased Security to identify SM-R720X...
Best Regards
adfree said:
Do you know SDB Tool?
You are able to work with it?
Click to expand...
Click to collapse
No, I never heard of it so I don't know how it works.
As I can do the Samsung Gear in my rom custom .... to install it but try to run it tells me that the phone has been modified.
Have anyone reached out and found a solution then? 👨🏻🦯👨🏻
hi guys,
my watch is stuck on "Samsung Gear S3 Classic" startup screen after trying to change the CSC code via reflashing by this thread:
https://forum.xda-developers.com/gear-s3/how-to/succesfully-changed-csc-to-xar-to-t3718236
I have tried recovery mode and it still comes back to this screen.
I have tried reflashing it with NetOdin but the wireless downloading screen is stuck and never actually gets past the initial Wireless download screen with the pinwheel thing.
Whatever i do, it is stuck at the gear s3 classic screen and will not go past it.
is there any way to reset/reflash the gear without using the wireless download mode??
please help
Sorry...
Seems you are here:
https://forum.xda-developers.com/gear-s3/help/wireless-mode-enter-gear-s3-sm-r760-t3710855
To change settings in netOdin is WRONG suggestion... but now is too late...
For reanimation you need USB cable...
Best Regards
adfree said:
Sorry...
Seems you are here:
https://forum.xda-developers.com/gear-s3/help/wireless-mode-enter-gear-s3-sm-r760-t3710855
To change settings in netOdin is WRONG suggestion... but now is too late...
For reanimation you need USB cable...
Best Regards
Click to expand...
Click to collapse
I managed to get the motherboard replaced by samsung.
Is there another thread i can follow to change the CSC code of the watch to USA? I am trying to get samsung pay in canada. may have been able to follow this thread and do it.
https://forum.xda-developers.com/gea...ar-to-t3718236
Please check Link... is not working...
Meanwhile we have other method to change CSC...
With SDB Tool... no Flashing of Firmware required...
Code:
launch_app csc-manager.csc-pre-configuration
SDB Tool is here:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
USA is XAR
Best Regards
adfree said:
Please check Link... is not working...
Meanwhile we have other method to change CSC...
With SDB Tool... no Flashing of Firmware required...
Code:
launch_app csc-manager.csc-pre-configuration
SDB Tool is here:
https://forum.xda-developers.com/showpost.php?p=74585286&postcount=330
USA is XAR
Best Regards
Click to expand...
Click to collapse
does this method void my warranty? is this essentially ROOTing it?
İ try install a fw with odin Wifi. And my watch is NOT boot. Only i see "Samsung gear s3 frontier" and shutdown my watch. İ try recovery odin Wifi but it same. Restart. Pls help me
Nobody here has Crystal Ball...
Try to give more details...
Model Name...
example SM-R760 or SM-R765A or SM-R770 or...?
What you flashed with netOdin?
Can you give filename? Or is it Top Secret...
...
Best Regards
adfree said:
Nobody here has Crystal Ball...
Try to give more details...
Model Name...
example SM-R760 or SM-R765A or SM-R770 or...?
What you flashed with netOdin?
Can you give filename? Or is it Top Secret...
...
Best Regards
Click to expand...
Click to collapse
i install AP_R760XXU1APK7 with odinnet. and my watch have bootloop.
model is r760.
it enters wireless mode but immediately restarts itself.
so i can not connect to wireless odin.
pls help.
Kannst Du deutsch?
Code:
AP_R760XXU[COLOR="Red"][B]1[/B][/COLOR]APK7
Wrong decision.
Software Revsion 1 is wrong...
Damn Rollback Prevention from Samsung...
Try this:
https://forum.xda-developers.com/showpost.php?p=74649096&postcount=2
And use only Software Revsion 2 Firmware.
Best Regards
Hello my friends
Please i need some help
I have Watch 4 Classic (42mm)
Model Number: SM-R885UZKAXAA
I need to flashing by oden becose is bricked
I need rom and and photo How to connect the USB cable to the watch
Please help me
Thank you in advance
I can try to help you...
Maybe first try to explain "bricked"...
?
Dead in black nothing on screen?
I am asking because meanwhile few variants of "bricked" known... also with Photos...
Best Regards
adfree said:
I can try to help you...
Maybe first try to explain "bricked"...
?
Dead in black nothing on screen?
I am asking because meanwhile few variants of "bricked" known... also with Photos...
Best Regards
Click to expand...
Click to collapse
Thank you for helping me... The problem is that the watch does not work completely. It does a continuous restart with the Samsung logo only and restarts. At first I thought the problem was the battery. I replaced it and still the same problem... Many attempts were made to fix it, but to no avail I wanted to try flashing the ROM, hoping it would work with it.
You can enter Reboot Menu? By holding both keys...
I was able to kill my SM-R870 with stupid tests... then infinity loop and no chance to enter Download Mode...
Will try to find my Video...
USB Pinout should the same:
SM-R765F Teardown
Dear friends, I found that the LTE connection is very useful when you have to leave your mobile somewhere and you can get calls and notifications through mobile connection. I bought a Gear S3 LTE (R765) from a Singapore site because in Italy it...
forum.xda-developers.com
I have forgotten if i have Firmware... Need to look at my HDD...
Best Regards
Found my Video...
Rooting Galaxy Watch4
I've unlocked bootloader, got boot.img(hashes match in update.zip and my boot.img + it boots fine), patched it and vbmeta in tar by magisk 24.3, but when i flash new boot.img, it throws me "SECURE FAILED: BOOT" error on watch and system doesn't...
forum.xda-developers.com
I killed Recovery/Security and was not able to enter Download Mode... then killed by short circuit... because all soooo f%&ing tiny...
Only as Info.
Best Regards
Code:
COMBINATION_FAC_FBR0_R885USQU1AVJ1_FACFAC_CL25273841_QB57442443_REV00_user_mid_noship_MULTI_CERT.tar.md5
I have only Combination Firmware... NO Stock Firmware.
And this FACtory Firmware is useless without eToken...
Sorry.
Best Regards
adfree said:
You can enter Reboot Menu? By holding both keys...
I was able to kill my SM-R870 with stupid tests... then infinity loop and no chance to enter Download Mode...
Will try to find my Video...
USB Pinout should the same:
SM-R765F Teardown
Dear friends, I found that the LTE connection is very useful when you have to leave your mobile somewhere and you can get calls and notifications through mobile connection. I bought a Gear S3 LTE (R765) from a Singapore site because in Italy it...
forum.xda-developers.com
I have forgotten if i have Firmware... Need to look at my HDD...
Best Regards
Click to expand...
Click to collapse
First, thank you very much for everything you do for me.
* Yes i can enter to reboot menu and from and Among the options from the list I choose only download usb (Only this option works at the moment)
* About USB pinout I think is same and
I am professional in the welding issue. so I am not afraid of his problems.
Now I only need the Frimware file SM-R885
adfree said:
Code:
COMBINATION_FAC_FBR0_R885USQU1AVJ1_FACFAC_CL25273841_QB57442443_REV00_user_mid_noship_MULTI_CERT.tar.md5
I have only Combination Firmware... NO Stock Firmware.
And this FACtory Firmware is useless without eToken...
Sorry.
Best Regards
Click to expand...
Click to collapse
Please If you can upload this Firmware i will to try with it .