So I did a temporary root on my phone using Weak Sauce 2 and installed xposed framework. After a soft reboot everything seemed to be working fine. Then I installed flat style bar, tweaked it and soft rebooted again. Worked fine. Now I try to install gravity box for jelly bean, when I try and open gravity box it says framework for gravity box not installed. This was probably my mistake here but I thought that that meant I needed to enable it in xposed then soft reboot. SO I enabled it in xposed and soft rebooted it and now my phone won't turn back on. I was charging it at the time and the red led was showing after I unplugged it the red led still shows. It also makes this fuzzy noise every 5 seconds or so like fft ftt (5 seconds) fft ftt and so on. Did I hard brick my device?
Bad idea installing xposed with temp root mate and no safe recovery, also the J/B gravity box for K/K was also not a good idea. You can not make any safe changes to any framework within the phone. Can you get the phone to recognize ADB? If so, i would try RUU man. Good luck!
Hello all,
I have installed the 324 lollipop rom with no problems. then I installed the TWRP 2.8.7.0 without problem and flashed superSU.
Everything worked fine. But then I installed xposed (http://forum.xda-developers.com/showthread.php?t=3034811).
after that, I completely lost my notification bar and my tray at the bottom with the home button... All I can see now, is my app-drawer and my apps. No back button as well. What could have happened? And how can I possibly restore this? I've tried to factory reset, but that did nothing. Can anyone help me?
PS: it seems volume buttons do not do anything either. Will check if I can install B324 again once it downloads...
Flash back the Xposed Disabler Zip and everything shall be restored.
Should have waited for this....I reflashed the entire ROM. Worked, but still...
Does xposed work for our mate 7 on lollipop?
I installed GLtools and after completing, the screen stuck and it is always on (never sleeps or dims display). None of the buttons work. I waited till it used up all battery and then charged to 5% to turn on again. When I turn on, I see my launcher still the same (and the phone launcher desktopsetup pretty intact), but after a few seconds, screen stuck again, buttons not working again.
Is there a way to remove/uninstall GLtools through PC or whatever means to fix this?
Please help.
Did you flash it in stock recovery or TWRP?
Also next time you need to forcibly switch the phone off, do it by either holding the power button for 10secs, or all three button for 10secs (not sure which it is on the R9+), it's a lot quicker than trying to flatten the battery!
Lum_UK said:
Did you flash it in stock recovery or TWRP?
Also next time you need to forcibly switch the phone off, do it by either holding the power button for 10secs, or all three button for 10secs (not sure which it is on the R9+), it's a lot quicker than trying to flatten the battery!
Click to expand...
Click to collapse
I did not flash anything. It was in stock rom. Is there still a way to fix this (remove GLtools)? Is the GLtools running in background that's why I was still able to unlock my phone and use my phone for a few secs before screen hang again?
EDIT:
I got it to work long enough to uninstall GLtools but there is this loading bar that appears even after I had removed GLtools,
http://i.imgur.com/dN4HaZW.jpg
Is this from the phone? or from my root app?
My phone screen still hungs now. I think it's not GLtools issue.
That bar is a ColorOS thing that it does while your system is updating.
Can you re-flash the stock ROM?
Lum_UK said:
That bar is a ColorOS thing that it does while your system is updating.
Can you re-flash the stock ROM?
Click to expand...
Click to collapse
So I learned how to force close the phone from you (hold power button for 10 secs), then I turned it on normally, it worked fine as normal. I tried rooting with KingRoot and it rooted, tried to install Xposed Framework thru a method found in youtube because I don't have TWRP (method uses BusyBox Pro, Terminal Emulator to flash the zip). But Xposed modules download button don't download (button goes back to idle when I tap "download").
I also tried Lucky Patcher and other similar apps to convert or move user app to system app, after reboot, the converted app is gone (deleted). This bar also keeps appearing after I did this.
That bar keeps appearing and freezes the screen (whatever the screen is currently showing) both during and after the progress bar finishes. Tried to force close and turn it on again. Stuck on Oppo screen for 8+ hours (left it as is, I went to sleep). Decided to flash the stock rom (power + vol down) without wiping data. Worked and returned to normal desktop launcher setup but phone goes back to unrooted. Xposed Framework is gone too.
Is this bar meant to check if I am doing changes to the system like root, Xposed, converting user app to system app and prevent me from doing those? I really need those things on my phone! :crying:
the bar is just when ColorOS is updating itself or generally making changes. Presumably it doesn't like something you did.
I'd probably leave off GLTools and just go with KingRoot and Xposed. They both worked on my old R9. I think the latest version of the Xposed APK has the ability to install the framework itself, so maybe try that method?
ColorOS is heavily modified from stock android, so a lot of mods for it simply don't work, unfortunately.
Lum_UK said:
the bar is just when ColorOS is updating itself or generally making changes. Presumably it doesn't like something you did.
I'd probably leave off GLTools and just go with KingRoot and Xposed. They both worked on my old R9. I think the latest version of the Xposed APK has the ability to install the framework itself, so maybe try that method?
ColorOS is heavily modified from stock android, so a lot of mods for it simply don't work, unfortunately.
Click to expand...
Click to collapse
why did the download button of Xposed not work when I tap on it? it does nothing for me.
Which Xposed should I get? I saw 2 APKs, a 3.0 and 3.1.1 alpha 4.
I was actually rebooting after I checked XMultiWindow module in Xposed when it got into bootloop
Get 3.11a4
<Mod edit: THREAD CLOSED on request of OP>
Sorry... I didn't realize there was a power button plus up volume key combination. That rebooted my phone. There is no crisis. Moderator can delete this
I am little spooked. .I think I have tried everything but my phone seems dead.
First, I have a TMOUS OP7 Pro which I converted to international and was running 9.5.13.GM21AA. I have been using the phone without problems for several days.
The phone is rooted with Magisk and I had a few modules installed including Rira-Core and Rira-EdXposed (SandHook). However, I had not installed the Xposed Installer apk.
The last thing I did before I rebooted was install the Xposed Manager apk. I read that this app was a better option than the Xposed Installer apk. I did not think I was risking anything because I had installed this same app before. without problems (but if memory serves I had first installed the Xposed Installer apk, downloaded some xposed modules, then uninstalled the installer apk and installed the Xposed Manager apk). This time I just installed the Xposed Manager apk.
I previously messed something up about 4 days ago. I am not sure what I did at that time, when I tried rebooting it strangely hung at the "Unlocked Bootloader" screen. However, I was able to get to the booloader screen. Since I had a backup, I just did a flashboot boot twrp.img using the SDK tools and restored it. The difference though was that I was able to get to the bootloader screen. Now I cannot seem to get anything. Screen is just black. I simply rebooted it and it went black. No unlocked bootloader screen, just black.
I have tried holding the power button and down volume button simultaneously, but nothing happens.
As said, I am very spooked and worried. Does anyone have any suggestions.?
THank you in advance.
Paul
I just updated from oos 10.3.2 to 10.3.3 and edxposed just completely broke. I was on yafa 4.6.3 and was working completely flawlessly now whenever I install riru core and yafa my phone starts flashing to lock screen while unlocked, losing status bar and nav bar and completely unresponsive for several seconds every several seconds and the phone is basically unusable. Any thoughts on running edxposed on 10.3.3?