Related
That's right, I'll pay $35 (Paypal) to anyone who can provide a working solution to my problem.
PROBLEM
---------
I recently bought the Ramos W13 8 inch tablet with Android 4.0.3. I was disappointed to note that it didn't have the Google Play Store on it. After trying to install it with Google Services Framework etc it still didn't seem to run.
Like an idiot I then got a modded firmware of another Ramos model (W6HD) which is a 7 inch and installed it through the UPDATE Mode (vol up and power). It installed and powers up to the android setup screen but is all messed up because of (I assume) the screen size difference. Touch screen doesn't seem to work either now.
Now for some reason I cannot get it to the UPDATE mode using the vol up and power button. When I do that it goes to a screen with an empty battery icon.
It might be that the Ramos W6HD requires a different method to get it into the update mode which is VOL+ and MENU while for my W13 it's VOL+ and POWER. And because the firmware I installed on my W13 is the one of W6HD it requires me to press the VOL+ and MENU but unfortunately my W13 doesn't have MENU button.
I can connect it to my computer through USB but not sure if it is debugging mode. I cannot get to the settings because the touch screen doesn't seem to work but I assume it is already in debugging mode because it gives an option to use USB for storage (in Chinese) once connected.
I've tried ADB once connected through USB but the command "ADB devices" shows no devices.
I'm sure there's a solution to this and I'm willing to pay $35 (Paypal) to anyone who can figure out a working solution.
Thanks,
Dan
It might be that the Ramos W6HD requires a different method to get it into the update mode which is VOL+ and MENU while for my W13 it's VOL+ and POWER. And because the firmware I installed on my W13 is the one of W6HD it requires me to press the VOL+ and MENU but unfortunately my W13 doesn't have MENU button.
So have I totally messed it up? Any way around it?
Thanks
Dan
Hm, "adb reboot recovery" should do...
Thanks utak3r but the tablet does load up but I can't controll it using the touchscreen for some reason hence I can't get to settings to put on USB debug mode. I've tried connecting it anyway but the "adb devices" command doesn't come up with any devices.
Any other suggestions?
Thanks,
Dan
No other suggestions? Is there any software/program I can use that can install the correct firmware (which I already have) without me needing to enable USB debugging?
Thanks
Dan
I'm now giving away $35 (Paypal) to anyone who could provide a working solution.
Thanks
Dan
There is an USB port on your tablet?
I had a similar problem when adb didn't see my device. I found the answer on you tube, it is the path of the adb folder. Once I figured that out I could see my device. So search you tube for adb. Good luck.
Sent from my ADR6425LVW using xda premium
smaury - Yes it has a micro USB port.
cam1pbell - I tried looking on Youtube, tried uninstalling and reinstalling device drivers but no luck. Not sure if the tablet is in debugging mode, I assume it is but it may not be, if it's not I don't have any way of putting it in debugging mode as the touch screen is not functioning.
If you had a "normal" usb port you could connect a mouse or a keyboard to control the tab and change rom through dd command using a terminal emulator!
I just tried installing the PDAnet software and it keeps telling me to connect to the device and turn USB debugging on. So I guess the USB debugging isn't already on.
Hmm...
What about: http://goclever.com/manuals/update_a73_en.pdf Point 2 ?
Does your microphone have special "button" ?
If yes, you can use Livesuit to upgrade your ROM via USB ( I know it is by ZIP in recovery), but you wouldn't know if you don't try You can find many ROM for 8inch- Cortex-A9 Tablets. And of course you can install recovery and try to install official updates
PS: Sorry for my "english" : )
Possible answer
try Droid Explorer ,should work for you
trofmoc - I just tried that, it didn't work, it couldn't recognise my tablet.
Bollero - I have a little reset button on my tablet, don't think it's for upgrading. Where can I download Livesuit from? Also in the PDF it says I need to download a specific Livesuit for my tablet.
http://download.goclever.net/serwis/tab/LiveSuitPack_1.09.zip < livesuit, works with 99% tablets
And this rom:
http://www.chinadigitalcomm.com/ice...791.html?sid=57498115339322d167292fdab3f3e45c
Try try try
I downloaded the Custom-ICS_4.0.3-Novo8-psquare_2.0RC1-signed ROM, is that the correct one? If so how do I install it with Livesuit? I tried pressing the little reset button, connecting it to computer with USB and releasing the button but it didn't seem to do anything. Then I tried the procedure with the VOLUME + button and the computer made a connection sound. So it seems to connect that way. Now how install the ROM?
Bolerro said:
http://download.goclever.net/serwis/tab/LiveSuitPack_1.09.zip < livesuit, works with 99% tablets
And this rom:
http://www.chinadigitalcomm.com/ice...791.html?sid=57498115339322d167292fdab3f3e45c
Try try try
Click to expand...
Click to collapse
you should first learn what is adb and fastboot, and how to use this commands
i will take a look on the rom privided by bolero and see if i can make you something to work, but this tomorrow
it is bad that you dont have to many info about the tablet
like processor, android version etc.
the sound that you heard can be from 3 things
1. the device is in adb mode, you can check this by using the command adb devices
2. the device is in fastboot mode, you can check this by using the command
fastboot devices
3. the device in is programming mode.
Did you installed the tablet drivers ?
The sound it makes when I press the volume up button and connect it to computer with USB is like 3 quick low sounds (der der der) not the usual sound of USB connection.
I know the basics about adb. Neither adb devices or fastboot devices commands show any devices.
Yes the tablet drivers are installed but in device managr the "Android ADB Interface" and "Android Composite ADB Interface" both have issues and it says "This device cannot start. (Code 10)"
Here are the tablet specs:
Ramos W13 Specifications
CPU Cortex-A9 1GHz
GPU Mali400
Operating System Android 4.0.3
RAM 1GB DDR2
Storage 8GB
Camera Two cameras
Storage Other microSD(TF) up to 32GB
Screen Size 8 inch
Screen Resolution 1024×768
Screen Type Capacitive
Video HD Support 1080P
Screen Output HDMI
Internet Connections WIFI
Wifi 802.11 b/g
GPS None
3G None
Battery Unknown
Music around the state About 6 hours
About the video mode About 3-4 hours
Music formats MP3,WMA,WAV,APE,FLAC,AAC,OGG
E-book formats TXT/PBD/PDF/EPUB/FB2/HTML
Video formats AVI,WMV,MP4,MKV,RM,RMVB,FLV,MOV,3GP
Picture formats JPG/BMP/GIF
Language Multi-language
Screen calibration Support
Clock function Support
Calendar function Support
G-sensor function Support
Remote control functions None
Transmission Interface USB 2.0
Other functions None
Hope that helps,
Thanks
Dan
globula_neagra said:
you should first learn what is adb and fastboot, and how to use this commands
i will take a look on the rom privided by bolero and see if i can make you something to work, but this tomorrow
it is bad that you dont have to many info about the tablet
like processor, android version etc.
the sound that you heard can be from 3 things
1. the device is in adb mode, you can check this by using the command adb devices
2. the device is in fastboot mode, you can check this by using the command
fastboot devices
3. the device in is programming mode.
Did you installed the tablet drivers ?
Click to expand...
Click to collapse
Well, in case you still don't have (I know you can't install it yet) the official ICS firmware for your Ramos W13
here is the download link:
http://www.ramos.com.cn//download/w13/w13-4.0.3-20120410.rar
Here, the translated site from where I took the download link with installation instructions.
As I understand the translation:
1.download the ROM and extract it to an empty/formatted memory card (a sd TF card.) You probably need to put the contents of the folder you extracted from the rar file onto the sd card not the folder itself.
2.power off the tablet and insert the memory card
3.press and hold the Vol+ and power button until you see something like an upgrade going on.
4.wait until the tablet reboots.
Watch out that it is the Vol+ button. Usually the Vol- button brings your to the download menu where you can install a Kernel or ROM via ODIN or something else.
Of course, if it doesn't work I would try every other possible two button combination.
Here is the rather unhelpful chinese specs pdf: http://www.ramos.com.cn//download/pd/W13_product_description_cn_120202_D.pdf
Some specs from the current english website.
Concerning the drivers, did you make sure whether the usb driver for your tablet is present in the device manager? If there is one but with an error sign, the debugging mode is probably activated but proper drivers are missing.
In that case, maybe USBDeview can be of some use.
At last, maybe you would like to post in this forum as well.
Thanks for that, before this problem, I got the official Ramos W13 firmware and installed it using the VOL+ and POWER, then I accidently installed Ramos W6HD firmware and it all messed up and the VOL+ and POWER combination doesn't work for installing firmware anymore, it just shows an empty battery icon.
I've tried all combinations but no luck.
Android Composite ADB Interface driver are present in Device Manager but show issues and cannot start for some reason. I've tried USBDeview to remove the drivers and install them again but still no luck.
Thanks,
Dan
siseam said:
Well, in case you still don't have (I know you can't install it yet) the official ICS firmware for your Ramos W13
here is the download link:
http://www.ramos.com.cn//download/w13/w13-4.0.3-20120410.rar
Here, the translated site from where I took the download link with installation instructions.
As I understand the translation:
1.download the ROM and extract it to an empty/formatted memory card (a sd TF card.) You probably need to put the contents of the folder you extracted from the rar file onto the sd card not the folder itself.
2.power off the tablet and insert the memory card
3.press and hold the Vol+ and power button until you see something like an upgrade going on.
4.wait until the tablet reboots.
Watch out that it is the Vol+ button. Usually the Vol- button brings your to the download menu where you can install a Kernel or ROM via ODIN or something else.
Of course, if it doesn't work I would try every other possible two button combination.
Here is the rather unhelpful chinese specs pdf: http://www.ramos.com.cn//download/pd/W13_product_description_cn_120202_D.pdf
Some specs from the current english website.
Concerning the drivers, did you make sure whether the usb driver for your tablet is present in the device manager? If there is one but with an error sign, the debugging mode is probably activated but proper drivers are missing.
In that case, maybe USBDeview can be of some use.
At last, maybe you would like to post in this forum as well.
Click to expand...
Click to collapse
**UPDATE**
NEW VERSION
THIS RELIES ON ADB COMMANDS, SO IF YOU DO NOT HAVE USB DEBUGGING TURNED ON, OR A CUSTOM RECOVERY TO BOOT TO, THEN IT WILL NOT BE AS SIMPLE AS JUST RUNING THE PROGRAM.
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
For anyone having issues...
If you had not previously activated USB Debugging, there are several steps you need to follow in order to enable ADB
SCREEN WORKING TOUCH BROKEN NO CUSTOM RECOVERYfirst, if you can see your screen, and have access to an otg cable, plug a mouse in to the otg cable, and the otg cable into the phone. Use the mouse to enable USB debugging, or to transfer files.
HOW TO ENABLE USB DEBUGGING
SCREEN WORKING TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN NO CUSTOM RECOVERYnow things get complicated...
*The following is paraphrased from this site
1. download the custom recovery image for your device. Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
I recommend clockwork mod non touch from this page
2. Power your device off and reboot your device to FASTBOOT or DOWNLOAD MODE depending on which type of device you have.
(most devices are fastboot, SAMSUNG typically uses DOWNLOAD MODE)
how to boot to fastboot or download mode
[FASTBOOT]3. Connect your device to your computer via USB and wait till you see the PC recognize the device
to check if your device is in fastboot and connected use CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot devices
you will see a list of connected devices. if not, something went wrong.
4. Launch Command Prompt and type the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot flash recovery c:\recovery.img
5. Wait for the process to finish.
6. Turn device off then boot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
[RECOVERY MODE (SAMSUNG)]USE THE INSTRUCTIONS ON THIS PAGE
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
HOPEFULLY THIS HELPS. REMEMBER TO CHECK THE FORUM PAGE FOR YOUR DEVICE IF YOU RUN INTO ISSUES. THIS ISN'T ANYTHING THE MEMBERS OF XDA HAVEN'T DONE THOUSANDS OF TIMES OVER.
Don't forget to hit "Thanks"
i'll bump this thread for those who didn't see this amazing tool, this tool is really useful, thank you very much
Hi,
Sturggling to find the .adb file as my phone shows up as a "Portable Device" any ideas?
Cheers
Thank you!
I joined just to say thank you to FuzzyMeep Two. Thanks for an awesome tool! It worked better than advertised!
:good:
Thanks again!
-th3r3isnospoon
Question
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
koperkowy said:
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
Click to expand...
Click to collapse
Yes, when it references SD Card it means the internal "SD" storage built in to the phone, not the removable one. It should work as long as ADB can connect.
Sorry for taking so long to reply, i really hope you got your pictures back.
FuzzyMeep Two said:
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
P.S. I apologize if i have posted this in the wrong place, if so please let me know.
Click to expand...
Click to collapse
Really great stuff - so simple but so effective. Cheers and thanks.
Error msg
zobes said:
Really great stuff - so simple but so effective. Cheers and thanks.
Click to expand...
Click to collapse
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
alisdairjk said:
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
Click to expand...
Click to collapse
NEW VERSION
Try this, i haven't gotten to test it, so please let me know if it worked for you, I added the option of selecting an emulator or USB device, because of your post. Hopefully it helps.
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Joeb29 said:
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Click to expand...
Click to collapse
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
joffmeister said:
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
Click to expand...
Click to collapse
I have the same situation right now. Managed to make your program work then I get the "error:device not found". My phone does show up in the computer folder(albeit not in mass storage mode), but isn't that what this program was made to work around?
My phone is a LG Optimus G with a smashed glass... The LCD still displays fine, but I'm stuck at my swipe lock because the digitizer is dead.
Thank you for your help and your wonderful program.
Thanks for this app. My girlfriend broke her screen and digitizer on her Galaxy S4. She never turned USB Debugging mode and has a lock on her screen. When using your app I get the same error when I use adb by itself which is "error: closed". ADB detects my phone but any command I use in ADB or with your app I get that same error.
Do you know how to fix this? Thanks in advance.
Thanks a lot man.
dude this tool is just amazing and does exactly what it promised. I was spending sleepless nights thinking about how to recover my data from my broken galaxy nexus and now that I have it I can rest easy. Seriously can't thank you enough for this. Just joined xda to thank you buddy.:laugh::fingers-crossed:
Getting an error "The system cannot find the path specified."
I start the recovery tool, set eh adb path successfully, and then I get this error. If I try running the recovery to pull the DCIM library I get this:
"error: device not found"
What can I do?
Thanks!
Either way this is an amazing tool, seeing how it helped some people already. :good:
Hi, Seem to have the same problem as many others, Device not found. I cant change to MTP mode on my LG G2.
I hope someone can find a solution to this problem.
Program seems amazing doh.
Hello,
This is really a great tool ! I was wondering if you could add the possibility to recover the external sd card aswell.
Device not found
Tried to recover a Samsung Galaxy S3 mini with a broken screen
I installed adb and RecoverData, run it and then get a "device not found error"
What can I do?
Amazing app. thank you so much :good:
FuzzyMeep Two said:
**UPDATE**
NEW VERSION
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
Don't forget to hit "Thanks"
Click to expand...
Click to collapse
Hi, Thank you very musch, It's so usefull for me.. :angel:
Are you getting errors like "device not found" or "device offline" while trying to run ADB commands? Here's a quick way to troubleshoot your problem on Windows.
Steps
1. Ensure USB Debugging is enabled in Developer Options.
2. Verify current Google USB Driver is installed and that Device Manager is using that driver.
3. Update to latest version of ADB.
1. Ensure USB Debugging is enabled in Developer Options.
Enable Developer Options by going to Settings -> About Phone and tapping on "Build Number" multiple repeated times. You will be greeted with "You are a developer."
Now, under Settings -> Developer Options, ensure you check the box for "USB debugging."
2. Verify current Google USB Driver is installed and Device Manager is using that driver.
You may skip this step if Device Manager lists your phone as "Android Phone -> Android Composite ADB Interface." If it does not, this is likely your root cause.
Go to the Google USB Driver page and download the latest driver directly from Google. Extract the zip file to a folder you know and will remember in the future.
Open up Device Manger in Windows with your Nexus 5 connected. Whatever your Nexus 5 is currently detected as, right click on it and select Properties. Then, in the Driver tab, hit "Uninstall." If available, select "Delete the driver software for this device." and hit "OK." It will remove the old drivers.
Restart your computer.
After restarting, reconnect your Nexus 5. It should be recognized as an unknown device in the Device Manager. (If it isn't, try the previous driver deletion steps again.)
Right click on the unknown Nexus 5 device, choose Properties, and in the Driver tab again select "Update driver." Browse your computer manually by putting in the path to the new Google USB Drivers you unzipped to a folder of your choice in the beginning of this step. Choose next and your drivers should install! You'll know everything completed successfully when you see the phone listed under "Android Phone -> Android Composite ADB Interface" in Device Manager.
This is the most finicky process, so don't be afraid to reboot your computer a time or two and repeat these steps if they don't work on the first try.
3. Update to latest version of ADB.
This is a crucial step. The new version of ADB is required to work with the "USB debugging authorizations" setting.
Perhaps you know how to update ADB, in which case, just do it. However, here's a detailed manual approach to download JUST the adb suite from the SDK:
Go to the Google Android SDK website and choose "Use An Existing IDE" and click the "Download the SDK Tools for Windows." This will allow you to download only an 80 MB file rather than the whole 400 MB suite.
Install the SDK tools exe to a folder of your choosing.
Run SDK Manager and uncheck everything except for "Android SDK Platform-tools." This is the ADB and Fastboot bundle. Install that.
Navigate to your SDK Path as indicated at the top of your Android SDK Manager window. You will now see a freshly downloaded platform-tools folder containing ADB.exe, Fastboot.exe, and a host of other files. That folder is now your updated, portable ADB tools folder. You can move it anywhere you like as long as you run ADB from a command prompt window set to that directory.
After you've followed these procedures, running "ADB Devices" should trigger a prompt on your device to accept the RSA fingerprint of your computer. Accept it, and now all should be working as intended!
Questions? Ask below!
Crowd-sourced solutions.
Windows 8 Diagnosis
Yorus said:
The following worked for me, since all of the suggestions mentioned here didn't work for me:
If you use a Windows 8.1 enterprise N or KN edition, install the Microsoft Media Feature Pack :
http://support.microsoft.com/kb/2929699/en
Sounds too simple to be true but work instantly for me.
Hope it works you some of the people here looking for a solution
Click to expand...
Click to collapse
Setting up ADB and Fastboot commands to work from ANY path (credit to original author in quote).
Chromium_ said:
Setup, Preparation and Prerequisites
ADB and Fastboot Installation
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only) or get a slimmed version containing only the essential components here (Thanks @El Daddy)
Extract the zip and place the android-sdk-windows folder on the root of your hard drive. (the path should be like this: C:\android-sdk-windows)
**If you chose to download the slimmed sdk skip to step 5**
Only if you downloaded the full sdk: Go into the folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
- Tools > Android SDK Tools, Android SDK Platform-tools
- Extras > Android Support Library, Google USB Driver
Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If not, repeat the step above.
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
(OR WHATEVER PLATFORM-TOOLS DIRECTORY YOU PICKED)
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
The importance of being careful with your command choices.
MkVsTheWorld said:
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Click to expand...
Click to collapse
Fixing MTP device not showing up after installing ADB drivers.
dbareis said:
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Click to expand...
Click to collapse
Whyzor said:
You should also mention what worked for me in post #16 (& confirmed by a few others in other threads). That is to toggle Settings - Storage - USB Connection type from Camera to Mass storage & also the debugging mode on & off.
Click to expand...
Click to collapse
Ashcunak said:
Op might wanna tack this onto the bottom of the main post as a last resort for folks to "start over" and be sure they have no old drivers installed.
http://www.nirsoft.net/utils/usb_devices_view.html
i had to use this program (right click run as admin if permissions are set) to remove EVERY single android related driver in order to get mine working.. turns out i had so many old ones in my system and some i couldn't remove from the device manager, the buttons wouldn't become click able..
Click to expand...
Click to collapse
CrazyIvan said:
I've tried everything and cannot get the authorization prompt to pop up on my Nexus5 so when I run adb devices the phone shows up as "unauthorized". Any suggestions? This is with updated sdk and USB drivers. Device manager shows phone as "Android Phone->Android Composite ADB Interface" and "Portable Device->Nexus 5". Tried toggling between MTP/PTP, USB Debugging on/off, stopping and starting the adb server (latest version 1.0.31).
Thanks in advance!
EDIT: Finally got the ba$tard! Run this for some adb debug logging:
adb kill-server
set ADB_TRACE=all
adb nodaemon server
Go and look back at the output from the start for any errors. In my case it couldn't mkdir in c:\users\administrator, which for me doesn't exist. I changed the Windows environment variable "ANDROID_SDK_HOME" to point to "C:\users\<my account dir>", closed the DOS window, re-ran the commands and I got prompted for the permission on my phone. Yee ha! Now I can fire up hello world with the SDK on my phone. Praise be to Google search for turning up this thread that told me about the debug logging.
Click to expand...
Click to collapse
SonicAngel said:
I just rooted my N5 (using the guide on this forum so I had no other drivers other than Google's SDK) and after unlocking my bootloader windows did not recognize my phone so I couldn't go further. Upon checking device manager I saw something called "AOSP on Hammerhead", a quick online search found a lot of very complicated answers (uninstall all drivers, restart, install adb drivers was one example).
Instead of all that I just right clicked "AOSP on Hammerhead", chose Update Driver, manually choose driver, went to "Android bootloader", chose the default driver from "Google inc" manually and that for some reason worked.
I figured this might help someone since the other solutions I found really were very long.
Click to expand...
Click to collapse
Questions? Ask below!
MaxRabbit said:
Reserved.
Questions? Ask below!
Click to expand...
Click to collapse
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
KTT16 said:
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
Click to expand...
Click to collapse
You're welcome! What shows up in your Device Manager now?
MaxRabbit said:
You're welcome! What shows up in your Device Manager now?
Click to expand...
Click to collapse
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
KTT16 said:
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
Click to expand...
Click to collapse
What step exactly did you take that fixed it?
MaxRabbit said:
What step exactly did you take that fixed it?
Click to expand...
Click to collapse
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
KTT16 said:
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
Ahh, your problem with my instructions then were that you weren't running ADB from inside the platform-tools folder
Definitely! I seriously got frustrated for a second and forgot how to read!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Not showing up as removable storage
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
MaxRabbit said:
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
Click to expand...
Click to collapse
It shows up as a 'Portable Device' -> 'Portable Media Player' (I was thinking it was a 'Device with Removable Storage').
I have full access to the internal file folders here at work.
Here's a suggestion for something to add to the OP.
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Sent from my Nexus 5 using Tapatalk
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
I have the same problem and done the same exact things u did. any help?
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
aluxzen said:
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
Click to expand...
Click to collapse
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Whyzor said:
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
That... Thankyou for that info.
I was able to get ADB to work but was not able to get the device to popup as a storage device. That fixed it. Thanks!
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/show...&postcount=937".
Click to expand...
Click to collapse
Thanks, that link was really helpful! I struggled with the correct detection before (seems I had some old drivers for my last phone on that windows installation...)
Whyzor said:
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
Thank you for sharing your solution.
Hello Helpers, I shattered my Nexus 4 screen, and the phone has a Pin lock, and is currently in Airplane Mode with BlueTooth enabled. It does Not have USB debugging enabled.
My objective is just to pull out the video, audio, and pictures files, after which I would throw the phone away. I appreciate any feedback, or if someone can help me post a reply to "k.janku1" at the post here http://forum.xda-developers.com/showthread.php?t=2786395 Please refer to point (4) below.
So is there a way I can enabled USB debugging or pull my files out? Following are what I have done, and none are successful in accessing the phone:
1) I have an OTG cable with a mouse. Nexus 4 would not recognize it. I did try to have this OTG Cable + Mouse plug into another Motorola phone and it worked, just not Nexus 4.
2) I plug my Nexus 4 into the PC through the USB cable, the Windows 10 recognize it but when I try to browse that Nexus 4, no files show up.
3) I installed the Android Studio 2.2.2, with various SDK (5.0 and 5.1 SDK) + Google USB driver. And then proceed to run the ADB "shell" or "devices" command located in folder "platform-tools", and the command line would tell me -- "error: no devices/emulators found", or "List of Devices attached" but with NO list of devices displayed. I even boot into Recovery Mode and the ADB command still not seeing any phone.
4) I even try the post here, and I could not get it working either -- http://forum.xda-developers.com/showthread.php?t=2786395
i) I tried the steps listed here http://forum.xda-developers.com/showpost.php?p=66731042&postcount=260 but it does not work for me. The step (2) here returned me "No devices", while step (3) is sort of confusing as it involves TWRP (??) and it said BootLoader would erase all my data files!
ii) Another post here in the same thread -- http://forum.xda-developers.com/showthread.php?p=62398797#post62398797 which mentions the use of "Flash through ADB". But then my phone does not have USB Debugging enabled, so how can ADB talk to the phone in the 1st place? And compile his codes in Android Studio perhaps?
iii) Another post of same thread -- http://forum.xda-developers.com/showthread.php?p=61792353#post61792353 which is lengthy and involves self-custom kernel + compile using Kernel Kitchen. Would this really work?
Thanks
Sean
I had the same of your situation i search and tried a lot of things even show the phone screen in pc but me too i didn't have usb debugging enabled, so what i did is :
Flash the stock ROM for my phone by Odin (it don't need usb Debugging enabled it is for Samsung phones) and by flashing new ROM all your files will be stay in the internal storage, after that the files will be showed in the PC, i don't know if u try that before so that is my solution
Sent from my GT-I9300 using Tapatalk
Xkirnel99 said:
...
Flash the stock ROM for my phone by Odin (it don't need usb Debugging enabled it is for Samsung phones) and by flashing new ROM all your files will be stay in the internal storage, after that the files will be showed in the PC, i don't know if u try that before so that is my solution
Click to expand...
Click to collapse
Thank you for the hint. But I doubt if this approach would work for Nexus 4. I searched online for Odin + Samsung, seems like Samsung phone has a Download mode where the phone would accept the new image file put to it. There is no such mode for Nexus 4, so the phone would not read anything in easy steps like Download mode.
As the title says.
I'm trying to unlock the bootloader on my XZs so I can root it.
My device is listed normally when turned on w/ the command window, but in fastboot mode it disappears and when I try a command, an error comes up saying ""error: no device/emulator found". (see attached image)
As far as I'm concerned, I have all the necessary drivers, I've tried on another PC, the result is always the same.
And when I try to change the drivers (Via Device Manager>Update Driver>Browse My Computer...>Let me pick...>Have Disk...)
I get yet another error saying "The folder you specified doesn't contain a compatible software driver for your device..."
Can someone please give me a solution. This has been asked before on XDA by someone else (that thread has no replies). It seems it's always us little guys with actual problems which need solving who get little to no help at all here.
Reinstall driver again.
It doesn't work. The problem is I want to install the Google USB drivers for my Xperia phone but Windows 10 will not let me and driver signing seems to be impossible to disable (currently typing this on my laptop while it's in test mode).
1. Turn off your phone. Boot in to fastboot mode and plug the cable. After your heard the sound from the computer for new device found. Go to device manager look to usb S1 device. Reinstall driver by manual choose (do not search) from the menu with the name is Android Google. When prompt for install. Choose install anyway. After successful install driver, please check status from flashtool to make sure your device show connected in fastboot.
2. Change the usb port. Sometimes you get problem with usb port 2.0 and 3.0
Hope you can fix it asap.
Nothing by the name of 'Android Google' appears in the menu when selecting new drivers.
I clicked on 'S1boot Fastboot' under 'other devices' in Device Manager and clicked on update driver
>Browse Computer
>Let me pick
- and then there's something similar called 'Android Device' but no 'Android Google' so I click on that
- then I get three options:
Android ADB Interface Version 11.0.0.0
Android Bootloader Interface Version 11.0.0.0
Android Composite ADB Interface Version 11.0.0.0
None of them worked when I tried.
I think the solution is to have the phone on, with USB debugging enabled, connect via USB to PC, test your adb devices again, if all good, go ahead and
Rich (BB code):
adb reboot fastboot
This is because some phones use Fastbootd (notice the d..).