Related
Hey, I've tried to fix this for almost 48 hours now, I have been trying to resolve the issue by doing a bunch of things that I've been told. I tried to install a fresh H60-L02, L01, L04 , L12 kernel but nothing is working.
Every time I'm flashing System.IMG , Recovery.IMG and the rest of the IMGs it ends up being stuck in a bootloop.
I'm not stuck on H60-L01 with emui 2,3 version.. And my phone was originally L04 version with the newest 2,3 emui.
All this began when i couldn't update to the new 3.0 emui version, so now I'm lost and have no solution for this, is there anyone that have had this problem before and could assist me?
Best regards
Thomas
Nanucas said:
Hey, I've tried to fix this for almost 48 hours now, I have been trying to resolve the issue by doing a bunch of things that I've been told. I tried to install a fresh H60-L02, L01, L04 , L12 kernel but nothing is working.
Every time I'm flashing System.IMG , Recovery.IMG and the rest of the IMGs it ends up being stuck in a bootloop.
I'm not stuck on H60-L01 with emui 2,3 version.. And my phone was originally L04 version with the newest 2,3 emui.
All this began when i couldn't update to the new 3.0 emui version, so now I'm lost and have no solution for this, is there anyone that have had this problem before and could assist me?
Best regards
Thomas
Click to expand...
Click to collapse
Download the full 3.0 Rom from here:
http://d-h.st/qErv
Extract the following with HuaweiUpdateExtractor and flash them via adb/fastboot:
boot, recovery, cust, system, cache and userdata
That's what I've done. but now my problem is it isn't displaying the correct internal sd size! Hopefully you don't get that issue...
mamboboy said:
Download the full 3.0 Rom from here:
http://d-h.st/qErv
Extract the following with HuaweiUpdateExtractor and flash them via adb/fastboot:
boot, recovery, cust, system, cache and userdata
That's what I've done. but now my problem is it isn't displaying the correct internal sd size! Hopefully you don't get that issue...
Click to expand...
Click to collapse
try factory reset in stock recovery might help.....
I fixed it, flashed back to stock.
Hi everyone.
I am facing a LOT of troubles with my phone (as stated in this thread).
Anyway now I have again unlocked bootloader, installed TWRP 3.1.1, rooted but I have a strange ROM installed by a service tech shop after the phone became unusable.
The problem is that this ROM does not show an update option in settings so I am stuck at 1st march security patches.
Here attached my actual Build Prop file.
The ROM seems to be a BLN-L21C900B300 (never heard of this and not even found on Firmware Finder) and the fingerprints show a "test keys" rom:
device: HWBLN-H
Display: BLN-L21C900B300
Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys
If I try to flash via TWRP a BLN-L21C432B360 (which was my previous stock ROM) it does not work and on TWRP appears the following:
......
write radio image
check_write_data_to_partition
write data error
E; unknown command (errno)
update_huawei_pkg_from_ota_zip: update package from zip failed
updater process ended with ERROR: 7
error installing zip file '/external_sd/update_full_BLN-L21_hw_eu_zip'
I cannot flash the FULL zip file with the core of the ROM but I can luckily flash the data, so I could get back Radio Fm and possibility to install themes....
To make the story short: is there someone who knows what this error is? Maybe I can get a solution.
Moreover: maybe this strange "device: HWBLN-H Display: BLN-L21C900B300 Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys" is preventing me to flash?
Changing build prop file can be useful?
Thanks to all.
Diamantes said:
Hi everyone.
I am facing a LOT of troubles with my phone (as stated in this thread).
Anyway now I have again unlocked bootloader, installed TWRP 3.1.1, rooted but I have a strange ROM installed by a service tech shop after the phone became unusable.
The problem is that this ROM does not show an update option in settings so I am stuck at 1st march security patches.
Here attached my actual Build Prop file.
The ROM seems to be a BLN-L21C900B300 (never heard of this and not even found on Firmware Finder) and the fingerprints show a "test keys" rom:
device: HWBLN-H
Display: BLN-L21C900B300
Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys
If I try to flash via TWRP a BLN-L21C432B360 (which was my previous stock ROM) it does not work and on TWRP appears the following:
......
write radio image
check_write_data_to_partition
write data error
E; unknown command (errno)
update_huawei_pkg_from_ota_zip: update package from zip failed
updater process ended with ERROR: 7
error installing zip file '/external_sd/update_full_BLN-L21_hw_eu_zip'
I cannot flash the FULL zip file with the core of the ROM but I can luckily flash the data, so I could get back Radio Fm and possibility to install themes....
To make the story short: is there someone who knows what this error is? Maybe I can get a solution.
Moreover: maybe this strange "device: HWBLN-H Display: BLN-L21C900B300 Fingerprint: Huawei/generic_a15/generic_a15:7.0/NRD90M/jslave04010520/:user/test keys" is preventing me to flash?
Changing build prop file can be useful?
Thanks to all.
Click to expand...
Click to collapse
U should use dload method
Sent from my BLN-L22 using Tapatalk
arshilhonor6x said:
U should use dload method
Click to expand...
Click to collapse
I forgot to mention: dload not working. Always error.
That's why I think TWRP is the only solution
B300 (at least for the BLN-L24) is the first of two update packages to rollback from Nougat to MM. The first update will take you from the latest firmware to B300 and then the second update will complete the rollback to your device's stock firmware.
dload this package to complete the rollback then do a factory reset and wipe cache partition in stock recovery. After that download and update to the latest firmware and proceed to unlock BL and flash twrp and you should be good to go.
Dazed No More said:
B300 (at least for the BLN-L24) is the first of two update packages to rollback from Nougat to MM. The first update will take you from the latest firmware to B300 and then the second update will complete the rollback to your device's stock firmware.
dload this package to complete the rollback then do a factory reset and wipe cache partition in stock recovery. After that download and update to the latest firmware and proceed to unlock BL and flash twrp and you should be good to go.
Click to expand...
Click to collapse
but you mean that I have to downgrade from Nougat to MM again?
And before doing it I have to flash the stock recovery?
My phone was, we can say, flashed in some way by the tech shop to this strange version of Nougat and with the "test keys" fingertips.
With the files you provide I should "dload"?
I do not understand your post.
please explain better.
Thanks.
Diamantes said:
but you mean that I have to downgrade from Nougat to MM again? Yes
And before doing it I have to flash the stock recovery? No
My phone was, we can say, flashed in some way by the tech shop to this strange version of Nougat and with the "test keys" fingertips. Like I said they did half of the rollback process which is why you are on B300 firmware that you cant find available for download
With the files you provide I should "dload"? Yes
I do not understand your post.
please explain better.
Thanks.
Click to expand...
Click to collapse
Download the zip I linked above from Huawei website. Extract the update.app and put it in dload folder on your external SD card and force flash (power vol - vol +). It will flash all the stock images and return your phone to factory firmware android 6.0 EMUI 4.1. It might bootloop after this but booting into stock recovery (power vol +) and perform factory reset followed by wipe cache partition will get you booting. Then you can OTA update to latest firmware and root again.
Well, I will try this weekend. Now the risk to stay without phone during working days is too high
Ah, BTW, thanks for suggestion.
Dazed No More said:
Download the zip I linked above from Huawei website. Extract the update.app and put it in dload folder on your external SD card and force flash (power vol - vol +). It will flash all the stock images and return your phone to factory firmware android 6.0 EMUI 4.1. It might bootloop after this but booting into stock recovery (power vol +) and perform factory reset followed by wipe cache partition will get you booting. Then you can OTA update to latest firmware and root again.
Click to expand...
Click to collapse
Well, I changed my mind and tried anyway now. I was just too curious.
result:
Software install failed.
Incompatibility with current version.
please download the correct update package.
As usual. Huawei sucks. Full stop.
Diamantes said:
Well, I changed my mind and tried anyway now. I was just too curious.
Click to expand...
Click to collapse
Haha I know the feeling. First time I went to rollback i jumped the gun and said screw it only to have my phone brick and no access to adb/fastboot until the next morning.
As usual. Huawei sucks. Full stop.
Click to expand...
Click to collapse
I agree 100%
Since you have nothing to lose right now just try the whole rollback process. Here is the update that the service center used to get your phone to BLN-L21C900B300. You can try flashing that again through dload or skip to trying to flash this. There are two different firmwares listed as the 2nd part of the rollback and you already said the last one I gave you failed so give this one a shot. Let me know how it works out for you:good:
Dazed No More said:
Haha I know the feeling. First time I went to rollback i jumped the gun and said screw it only to have my phone brick and no access to adb/fastboot until the next morning.
I agree 100%
Since you have nothing to lose right now just try the whole rollback process. Here is the update that the service center used to get your phone to BLN-L21C900B300. You can try flashing that again through dload or skip to trying to flash this. There are two different firmwares listed as the 2nd part of the rollback and you already said the last one I gave you failed so give this one a shot. Let me know how it works out for you:good:
Click to expand...
Click to collapse
nothing mate.
I tried, gives me always error after entering erecovery. Same as above,
Software install failed.
Incompatibility with current version.
please download the correct update package.
Will try another method suggested in another thread.
Will keep you updated just for your curiosity...
Cheers
Diamantes said:
nothing mate.
I tried, gives me always error after entering erecovery. Same as above,
Software install failed.
Incompatibility with current version.
please download the correct update package.
Will try another method suggested in another thread.
Will keep you updated just for your curiosity...
Cheers
Click to expand...
Click to collapse
Have you tried the Team MT huawei multitool to flash the images from the firmware? Use the Huawei update extractor tool to get the boot,cust,recovery,system and userdata.img from the firmware you tried to flash and then put them in the unbrick folder in the multi tool. Put phone in fastboot and run the Multi tool and use the unbrick option. I know your phone is not bricked but this way it will flash all 5 images in order through fastboot. You could actually try and flash the most current firmware with this method and avoid having to system update from MM to Nougat.
yes, exactly, I am trying with multitool . another bro suggested me how to do it even if with a slightly different method.
"You need flash the oeminfo via multi tool and then same firmware file for your current version via dload. It should be fixed".
WTF....never sweat so much for a phone. And never had those problems flashing samsung... and I was flashaholic
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Diamantes said:
yes, exactly, I am trying with multitool . another bro suggested me how to do it even if with a slightly different method.
"You need flash the oeminfo via multi tool and then same firmware file for your current version via dload. It should be fixed".
WTF....never sweat so much for a phone. And never had those problems flashing samsung... and I was flashaholic
Click to expand...
Click to collapse
Thats me i guess :silly:
---------- Post added at 08:13 AM ---------- Previous post was at 08:12 AM ----------
Dazed No More said:
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Click to expand...
Click to collapse
I am still learning and everytime its different result . Someitmeit works and sometimes it doesn't
Dazed No More said:
Yes, I have learned so much about this phone and the flashing/brick/unbrick process in the last 2 weeks.
Click to expand...
Click to collapse
When I go to multitool "unbrick", it asks for custom.img, but in no update.app of my firmware is present.
Moreover now I just can enter erecovery. It does not boot. I can enter fastboot only. Multitool is now not recognizing the phone. Do you know how to proceed?
I put in dload the firmware .app, but it says "software install failed"
Pheew...I managed to have again that fuc..ng C900B300.
I entered fastboot and repeated the unlock bootloader process. That way the phone got a hard reset and started over. Believe me when I say I tried all the methods I knew.
I think there is something locked somewhere in my partitions (I am not an expert of course) that prevent me to do deep modifications. Now I just can TWRP data but not the core. And again I have no update option. I think I am stuck forever at this stage with 1st march patches and nougat 7.0.
I do not think I will be ever able to have Oreo.
Amen. I am really tired to waste my time with this s**t. Next phone will be again a Samsung or One+. Full stop. Stop chinese brands.
Where are you located, Europe?
Yes
Ok bro I really hope this is it. Full firmware BLN-L21C432B151. I already downloaded it myself and checked with extractor tool it has all the images you need. Since you have fastboot back use the multi tool unbrick again and now that you have all the necessary images cross your fingers it will work.
And I agree with you about the phone. Made up my mind im giving this turd to my sister and getting the OP5T in a few weeks.
Thanks. I will do it this weekend. Today I spent 5 hours to get back my configuration after the hard reset with the apps I use for work. Cannot risk again tomorrow.
In another thread, sashank suggested to change OEM file because probably phone doesn't recognize the firmware I want to install.
It didn't work and lead me to start from scratch with the same strange build.
I will try your method but first I must study better the procedure because I don't want to mess up everything and risking to throw the phone in the garbage (where it belongs in the end...).
Thanks.
Hello.
I need a help with my Honor 8, it's been bricked and I honestly don't know if there is much to do in my current situation.
So the phone has locked bootloader and stock recovery.
Fastboot always returns 'Command not allowed'
What exactly happened:
I was running Stock ROM, rooted, TWRP Recovery with unlocked bootloader.
An official OTA update popped-up on my phone, I was in a rush and I missclicked (don't even ask lol) and the update started installing, I knew I'm screwed.
So I was about to play with fastboot, but it always returned 'Command not allowed'.
And probably the worst mistake happened a few minutes ago (6:00 am trying to fix it half a sleep), I was reading some posts about the dload method, >>FASTFORWARD I installed an official update using the dload method and locked my bootloader by doing this.
QUICK SUMMARY:
So I'm stuck on a bootloop.
The 3 button combo works.
Stock Recovery works as well.
Fastboot does NOT work. (I tried flashing, unlocking, temp-booting.. but nothing)
adb always returns error:
Code:
device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
Is there ANYTHING I can do in my current situation? :crying:
Thanks in advance for any help.
Have a nice day.
Hello, as long as you have an official recovery, a proper BOOT.IMG and the dload method is working there is still a chance( i hope), the only thing you need to know is that if the firmware is the wrong for your phone it will deny it. It means that is if you try to install an android 6.0 based stock ROM over a 7.0 ROM , it will say software upgrade failed or something like that.
You need to know under which Android version you were and install the same or maybe a more recent one but not to far away from your actual ROM, try the next one. You can also try to downgrade USING a rollback package that you can download on honor official site. Make sure that's the the correct file for your phone.
Hope you'll make it bro, let me know how the situation evolve
(sorry for any language mistake, english isn't my native language.)
Rayan19997 said:
Hello, as long as you have an official recovery, a proper BOOT.IMG and the dload method is working there is still a chance( i hope), the only thing you need to know is that if the firmware is the wrong for your phone it will deny it. It means that is if you try to install an android 6.0 based stock ROM over a 7.0 ROM , it will say software upgrade failed or something like that.
You need to know under which Android version you were and install the same or maybe a more recent one but not to far away from your actual ROM, try the next one. You can also try to downgrade USING a rollback package that you can download on honor official site. Make sure that's the the correct file for your phone.
Hope you'll make it bro, let me know how the situation evolve
(sorry for any language mistake, english isn't my native language.)
Click to expand...
Click to collapse
Woohoo, after a few tries & factory resets I was able to boot my phone again using the dload method :victory: The TWRP recovery has vanished and it seems like there is no sign of root(?) either, I'm gonna redo everything again, thanks so much for your help, you saved me bro <3 Have a wonderful day.
I am really glad that you get your phone back on track ! And yh the dload method bring you to stock everything, stock recovery,stock system etc etc.
Have a nice day
crepnik said:
Woohoo, after a few tries & factory resets I was able to boot my phone again using the dload method :victory: The TWRP recovery has vanished and it seems like there is no sign of root(?) either, I'm gonna redo everything again, thanks so much for your help, you saved me bro <3 Have a wonderful day.
Click to expand...
Click to collapse
Hi Crepnik,
Even I am facing the same issue. Can you please tell me which ROM did you download.
My phone was update to Nougat EMUI 5.0
Thanks
[email protected] said:
Hi Crepnik,
Even I am facing the same issue. Can you please tell me which ROM did you download.
My phone was update to Nougat EMUI 5.0
Thanks
Click to expand...
Click to collapse
Try to flash the rollback package and then an EMUI 4.x ROM. They're both available on honor official site
Rayan19997 said:
Try to flash the rollback package and then an EMUI 4.x ROM. They're both available on honor official site
Click to expand...
Click to collapse
Hi Ryan,
Thank you so much for responding.
I could see two ROM in the official site http://www.hihonor.com/in/support/
HONOR 8 Firmware (FRD-L02, C675B130CUSTC675D002, India)
HONOR 8 Firmware (FRD-L02, Android 6.0, EMUI 4.1, C675B160, India Channel)
I tried with both the ROMs but no luck
I placed the update.APP file inside sdcard but the update stops at 5% showing that it has failed.
I also tried flashing the recovery.IMG in fastboot mode.
I have lost all the hopes in my new phone
In the rescue mode it says UNLOCKED.
Please guide me with some detailed steps.
Thanks
Flash the stock recovery of the ROM that was previously installed on your phone , then with dload method flash the rollback package downloaded from honor site , and finally flash one of the two ROM, it may resolve your issue because the phone won't accept a lower firmware without flashing the rollback package first. As long as you can use dload method it should be fine.
If it doesn't work try to flash boot.img , recovery.img, cust.img, vendor.img and system.img extracted from a clean firmware downloaded on honor official site
Let us know how the situation evolve
Hello y'all, i issued a problem tomorrow by rooting BLN-L21C432, i unlocked bootloader with no problem, when was time for flashing recovery, i flashed the boot into the recovery and issued a problem in the dev options and security. Cuz of that, i can't access to adb, hisuite hdb to backup, and can't install extern apps without autorizations.
I tried all night long to resolve but no way, add to that the fact i've got a very very low connexion so 3-4h to load an update.zip.
So i downloaded b370, no way i can't use the dload method, fail at 5%. Same issue with b369. Tried to flash manually system boot and recovery by extracting update.app, no result, it's same. Tried to Unbrick via multi-tool, i use it on honor 7, but there's no cust image in update.app.
Build number is normal, C432B365.
I don't know what to do now, it's 10 hours i'm losing my minds with that phone. Please heeeelp :crying:
From which firmware ? Is it good if i flash boot and recovery from B360 ?
Edit : Actually the phone is in B365, it would be better if i try to dload from it right ?
I read that unlocked bootloader could block an update, is that true ?
Rommco05 said:
No u need to flash boot and recovery from actually firmware. After when u flash right boot and recovery (from B365). Now u try installing this firmware us it B360. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v82485/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L21_hw_eu/update_data_full_BLN-L21_hw_eu.zip
You can use dload method or over Firmware Finder
Click to expand...
Click to collapse
I'm gonna download it and come back later, thank you very much
Hi guys I came over the problem by only flashing the original boot that was B365, it was si obvious, thanks to you for helping me bro, real thank ?
So I got an honor 6x that I can't do anything with. I can't flash any ROMs or firmware here's the weird part of it.
Its on some version of EMUI that I can't have the system update menu and it has a button for app twin. It says BLN-L24C567B366 as the model number. Speakers don't work. I can't play videos on it and I can't use the camera in any app.
Here's the really weird part:. If I wipe all partitions and try to flash a room it boots to the same EMUI firmware not the custom rom I can't do anything to change what the rom is. It's like it's stuck in that weird Frankenstein EMUI firmware that I don't even know how I got. I tried restoring anback up cause I formatted my data partition on accident causing it not to boot or something and the backup I restored was not the backup that I made . The backup I made was a stock backup onto an SD card. When I restore it it's rooted and has some downloaded apps on it. And a different launcher. Not what I backed up originally.
I'm at a loss here. What do I do? Ihave full access to adb to flash with fastboot and can get into twrp or stock recovery. No ROMs I flash will work. In twrp it says it was successful. Ut when I boot it doesn't boot to that room, it boots to the weird emui os I can't get rid of.
Has anyone run into this issue or know how to fix it?
The exact same thing has been happening to me. The only OS that will boot up completely is the EliteRom that I attempted on my first flash after bootloader unlocking. I'm almost at my wit's end on how to resolve the issue, as I have tried the guide to roll back to stock posted here at XDA to a tee, with three different update.app files, and each one fails on install package step at 5%.
Hopefully someone with more experience than I will come along and can help us, but I did want to let you know you are not alone with this issue. At this rate, I'll have to get a backup phone to use.
All my update.app files get stuck at 5% too. And I know honor/Huawei won't repair it cause the warranty is void or if they can they would charge you.
Honestly get the Moto G5s plus. Get the unlocked version at best buy if you're in the states. It's 239 for the 32gb/3gb. Ram model and 299 for 64gb and 4gb. Best budget phone you can get and dual cameras. The ROM support isn't as big as the honor but it is easy to unlock the bootloader and do things. My only ROM issue I've had with this was trying to update magisk the phone had to reboot to install and after that, I had a lock screen set up btw, when I went to enter the pin the screen would go black, the phone would buzz, and go back to the lock screen. And I tried restoring a backup I made but the phone wouldn't boot stuck at the boot logo before the animation.
But the stock firmware I acquired on XDA along with the steps to flash in adb every file in the stock firmware fixed it with no problems at all so at least there's an easy way to restore the stock firmware for my new phone. It's way better than the honor 6x
Seriously tho check out the Moto G5s plus. Out of the box it has Android 7.1.1 mostly stock without all of Google's bloatware. Front mounted fingerprint sensor that you can you for the home, recent apps and back button, and can lock the screen with it if you have fingerprint set up and activate the Google assistant. It also has a notification light that you need root to use. But it has this cool "always on display" type thing that shows a clock and notifications when you move the phone or get a notification. It isn't an AMOLED display tho. It's. 1920x1080p one. Ips good viewing angles. Honestly this is the best phone I've ever used. And it has a Motorola turbocharger in the box. It's really worth it
TurtlePwr82 said:
The exact same thing has been happening to me. The only OS that will boot up completely is the EliteRom that I attempted on my first flash after bootloader unlocking. I'm almost at my wit's end on how to resolve the issue, as I have tried the guide to roll back to stock posted here at XDA to a tee, with three different update.app files, and each one fails on install package step at 5%.
Hopefully someone with more experience than I will come along and can help us, but I did want to let you know you are not alone with this issue. At this rate, I'll have to get a backup phone to use.
Click to expand...
Click to collapse
i think it could be an issue with the kernel cause the eliteRom has a custom kernel in it.. i have the update.app file for the BLN-L24C567B366 ad B365 files that i can extract and give you all the images that they have and maybe try to get the stock kernel somehow that might help?
TurtlePwr82 said:
The exact same thing has been happening to me. The only OS that will boot up completely is the EliteRom that I attempted on my first flash after bootloader unlocking. I'm almost at my wit's end on how to resolve the issue, as I have tried the guide to roll back to stock posted here at XDA to a tee, with three different update.app files, and each one fails on install package step at 5%.
Hopefully someone with more experience than I will come along and can help us, but I did want to let you know you are not alone with this issue. At this rate, I'll have to get a backup phone to use.
Click to expand...
Click to collapse
Try flashing every single update version until one of them works. Once youve found one that works follow this guide: https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
I had somewhat the same issue, I dload always had an error in 5%, try to flash B360 with dload, that did the job for me.
As for the apps that dont show like the updater(yes, its a system app and is stored in /data) flash the other zips that come with the update.zip
My procedure was:
-Wipe /system and /data
-TWRP flash alternative zips that come with update.zip
-dload B360
That should bring you back to factory stock, In case you still dont have updater and other system apps:
-unlock bootloader(again)
-install TWRP
-DO NOT WIPE ANYTHING
-TWRP flash alternative zips that come with update.zip
-dload B360
xinoxkai said:
I had somewhat the same issue, I dload always had an error in 5%, try to flash B360 with dload, that did the job for me.
As for the apps that dont show like the updater(yes, its a system app and is stored in /data) flash the other zips that come with the update.zip
My procedure was:
-Wipe /system and /data
-TWRP flash alternative zips that come with update.zip
-dload B360
That should bring you back to factory stock, In case you still dont have updater and other system apps:
-unlock bootloader(again)
-install TWRP
-DO NOT WIPE ANYTHING
-TWRP flash alternative zips that come with update.zip
-dload B360
Click to expand...
Click to collapse
I'll give that a try. When you say flash alternative zips that have update.zip do you mean "stock" firmwares off firmware finder?
xSpartacusx said:
I'll give that a try. When you say flash alternative zips that have update.zip do you mean "stock" firmwares off firmware finder?
Click to expand...
Click to collapse
Yes, firmware finder showed me 3 zips, update.zip, update_data_full_public.zip and update_full_BLN-L24_hw_usa.zip, the later 2 are the "alternative zips". Just TWRP flash them.
Also, update_full_BLN-L24_hw_usa.zip might throw an error when flashing it, don't worry, by the stage it fails in its script it already did what it was expected to do and you will not have further problems.
do i need the stock recovery flashed in order to do dload?
well i followed the first half of your guide and it successfully "updated" but my storage is encrypted
xSpartacusx said:
do i need the stock recovery flashed in order to do dload?
Click to expand...
Click to collapse
Not really, I did it when I had TWRP installed
well so far so good now to do the other part also my build number is stil B366 camera and everything works now no updater or anything like that
xSpartacusx said:
well so far so good now to do the other part also my build number is stil B366 camera and everything works now no updater or anything like that
Click to expand...
Click to collapse
Yeah, my build number never changed from B366, the only thing is that when I finished everything even though I'm in B366, EMUI stays in 5.0 and not 5.0.1 as it should be... But that is the only difference and I didn't notice any difference really
okay got the stock apps back updater is back everything is fine!! one thing i noticed.. before i started flashing roms, i had an update to EMUI 5.0.1 and i dont have an update for it anymore...?
xinoxkai said:
Yeah, my build number never changed from B366, the only thing is that when I finished everything even though I'm in B366, EMUI stays in 5.0 and not 5.0.1 as it should be... But that is the only difference and I didn't notice any difference really
Click to expand...
Click to collapse
xSpartacusx said:
okay got the stock apps back updater is back everything is fine!! one thing i noticed.. before i started flashing roms, i had an update to EMUI 5.0.1 and i dont have an update for it anymore...?
Click to expand...
Click to collapse
Maybe at this point to fix the build number that remains another even if you're in a previous build, it could be sufficient to flash through TWRP a version.img extracted from your ACTUAL build. You can extract it from the update.zip of your actual firmware with Huawei Update Extractor and then flash it as image through TWRP
RedSkull23 said:
Maybe at this point to fix the build number that remains another even if you're in a previous build, it could be sufficient to flash through TWRP a version.img extracted from your ACTUAL build. You can extract it from the update.zip of your actual firmware with Huawei Update Extractor and then flash it as image through TWRP
Click to expand...
Click to collapse
xSpartacusx said:
okay got the stock apps back updater is back everything is fine!! one thing i noticed.. before i started flashing roms, i had an update to EMUI 5.0.1 and i dont have an update for it anymore...?
Click to expand...
Click to collapse
Today I fixed that issue, it showed me that I had B366 but the security patch was on march 2017 and EMUI 5.0 instead of 5.0.1.
What I did was install B366 with the proxy method with Firmware Finder, I made it download the full package from the Huawei Updater (it was around 2.4gb) after it finished the update I had B366, EMUI 5.0.1 and november security patch so all is fine now! :victory:
xinoxkai said:
Today I fixed that issue, it showed me that I had B366 but the security patch was on march 2017 and EMUI 5.0 instead of 5.0.1.
What I did was install B366 with the proxy method with Firmware Finder, I made it download the full package from the Huawei Updater (it was around 2.4gb) after it finished the update I had B366, EMUI 5.0.1 and november security patch so all is fine now! :victory:
Click to expand...
Click to collapse
Good one dude, maybe FF proxy method could help xSpartacusx to solve his issue too!