I am working on a kernel for this device and I am looking for testers. I will be posting a build shortly, I cannot test on my device at this time as I do not have it.
here...one request vibration motor is very weak.. it'll be highly appreciated if u please add vibration strength on custom krrnels...i also faced this problem on 5t...after using custom kernel and set it to 100 it went fine..so looking forward for this feature.. #request
Heeere i am! Thank you for building your kernel, i loved them one my 6P :good:
Muntasir Mahmud Saif said:
here...one request vibration motor is very weak.. it'll be highly appreciated if u please add vibration strength on custom krrnels...i also faced this problem on 5t...after using custom kernel and set it to 100 it went fine..so looking forward for this feature.. #request
Click to expand...
Click to collapse
_MartyMan_ said:
Heeere i am! Thank you for building your kernel, i loved them one my 6P :good:
Click to expand...
Click to collapse
First build will just make sure the modules load properly and ensure all boots and include wakelock blocker. After that, the fun will begin.
Downloads: http://hunternott.com/darkroom/enchilada
Includes kcal?, thanks for you work
Mennpiko said:
Includes kcal?, thanks for you work
Click to expand...
Click to collapse
not yet, need to test if the first build works before I add anything else
DespairFactor said:
not yet, need to test if the first build works before I add anything else
Click to expand...
Click to collapse
Ok, when I get home to flash it, I never cast any mobile kernel with trebble and partitioned A / B, so I read it has a new toolchain, the commands to compile are the same as for x64 ?, thanks to beforehand, Salu2
DespairFactor said:
I am working on a kernel for this device and I am looking for testers. I will be posting a build shortly, I cannot test on my device at this time as I do not have it.
Click to expand...
Click to collapse
i'll be there for u
Maybe a telegram group ?
Mennpiko said:
Ok, when I get home to flash it, I never cast any mobile kernel with trebble and partitioned A / B, so I read it has a new toolchain, the commands to compile are the same as for x64 ?, thanks to beforehand, Salu2
Click to expand...
Click to collapse
It is an AnyKernel2 zip
Neil_Armstrong_ said:
i'll be there for u
Click to expand...
Click to collapse
Takumashii said:
Maybe a telegram group ?
Click to expand...
Click to collapse
I have a telegram group https://t.me/darkroomdev
What are the steps to install the Kernel? Coming from taimen and I'm Not familiar with the oneplus flashing commands.
Thanks in advance
Flashed fine, booted but no WiFi.
Had to go back to stock as I'm at work. Any logs you need pm me or telegram me.
mwilky said:
Flashed fine, booted but no WiFi.
Had to go back to stock as I'm at work. Any logs you need pm me or telegram me.
Click to expand...
Click to collapse
What were your steps in twrp?
blaze9090 said:
What were your steps in twrp?
Click to expand...
Click to collapse
Just flashed the zip in twrp then flashed magisk over the top
I dont get IT. I did exactly the same and the Phone soft bricked and booted to bl.
Flashed the kernel, for me it's bootlooping into the bootloader i think i missed something
EDIT: Flashed Magisk 16.4 over it, now it could boot. Got a message: " Internal problem with device, contact the phone manufacturer" or something like that. It's buggy as hell. First boot i could unlock without any issue, but after i locked and try to unlock it reboots.
_MartyMan_ said:
Flashed the kernel, for me it's bootlooping into the bootloader i think i missed something
EDIT: Flashed Magisk 16.4 over it, now it could boot. Got a message: " Internal problem with device, contact the phone manufacturer" or something like that. It's buggy as hell. First boot i could unlock without any issue, but after i locked and try to unlock it reboots.
Click to expand...
Click to collapse
Weird, I released R1, it is all working now, audio and wifi included.
Thread here: https://forum.xda-developers.com/oneplus-6/development/kernel-chewie-kernel-t3796965
Related
Development? Anyone?
There is one guy I saw posted on a rooting thread that he has developed a ROM for this device but, does not know how to write the updater-script so he is looking for help with that. Perhaps you can help.
You can find that post HERE
BookCase said:
There is one guy I saw posted on a rooting thread that he has developed a ROM for this device but, does not know how to write the updater-script so he is looking for help with that. Perhaps you can help.
You can find that post HERE
Click to expand...
Click to collapse
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, we got root, now get us off touchwiz!
logikism said:
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, who got root, now get us off touchwiz!
Click to expand...
Click to collapse
I have ported roms in the past to Kindle Fire HD from the Nexus tabs. It's way easier to port than to build a rom from scratch. The tricky part is finding the easiest roms to work with.
Well I can't do either.
Wouldn't we want to get something on here other than stock?
I'll take a port! Lol
logikism said:
Well I can't do either.
Wouldn't we want to get something on here other than stock?
I'll take a port! Lol
Click to expand...
Click to collapse
I'll look around, see what might work.
logikism said:
i wish! i know nothing about development. :crying: i would love to learn. but that doesnt help anyone here. i started a step by step to port CM but got stuck because i couldnt find kernel source. PLEASE someone, who got root, now get us off touchwiz!
Click to expand...
Click to collapse
here you can find the kernel source http://opensource.samsung.com/reception.do
Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.
nl3142 said:
Well I would think that you would need a working custom recovery with external SD card support first. Though the big feature I am looking forward to is a kernel that supports Roehsoft Ram Expander (swap) which while it works fine on my S3 does not work at all on the Tab 4 7.0.
Click to expand...
Click to collapse
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
BookCase said:
I'll look around, see what might work.
Click to expand...
Click to collapse
That would be great! Thank you!
Maybe we can get the ball rolling on development!
sub77 said:
here you can find the kernel source http://opensource.samsung.com/reception.do
Click to expand...
Click to collapse
Thank you, I sent request
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
adammo666 said:
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
Click to expand...
Click to collapse
my request to get source was approved but when i click the download link nothing happens.
I personally want to see MAHDI ROM!
logikism said:
my request to get source was approved but when i click the download link nothing happens.
I personally want to see MAHDI ROM!
Click to expand...
Click to collapse
Yep I know nothing happens. But just open it in internet explorer (assuming you used chrome, just like I did).
if you open it in IE new window pops up and gets you to download
logikism said:
Thank you, I sent request
Click to expand...
Click to collapse
adammo666 said:
Sadly I have no porting knowledge atm, but if I could help with testing or something, then just pm me. I'd love to see some cm or PA on my tab 4 7.0
Click to expand...
Click to collapse
neither do i, but ill try and hope for help.
BookCase said:
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
Click to expand...
Click to collapse
i did this and phone stuck on boot screen. now it wont power on or charge. wonderful!
Any help?
BookCase said:
There is a fully working recovery with SDcard read/write support as mentioned in THIS post.
What I did was downloaded the TWRP 2.8.0.1 .img for t230 then flashed it over the older non-working TWRP using #Rashr. It works for me on SM-T230NU and wipe works. Dalvik/Cache, everything.
CREDITS: agriff
Click to expand...
Click to collapse
I already have root (by using vroot and then replacing the chinese app with supersu). Can I just flash TWRP with Rashr or do I need to redo the whole thing from scratch?
logikism said:
i did this and phone stuck on boot screen. now it wont power on or charge. wonderful!
Any help?
Click to expand...
Click to collapse
Hmm, I have no idea. Worked for me in one go. Maybe start over?
nl3142 said:
I already have root (by using vroot and then replacing the chinese app with supersu). Can I just flash TWRP with Rashr or do I need to redo the whole thing from scratch?
Click to expand...
Click to collapse
I resstored the device in odin to the latest factory firmware then flashed the twrp in odin, rebooted directly to recovery and flashed supersu. Rebooted to system, set up all my stuff and flashed the new twrp over the old twrp using rashr. I had to reboot once to set up rashr before i could flash but, it all worked perfectly for me
BookCase said:
Hmm, I have no idea. Worked for me in one go. Maybe start over?
Click to expand...
Click to collapse
cant start over if it wont turn on at all and i believe the battery is dead and it wont charge.
ive read about this issue with other galaxy tabs (2,3) and i need to open up and disconnect battery, i will try this when i get home. i hope it does something after. i just got this thing.
i cant just flash the good twrp instead of one over the other?
logikism said:
cant start over if it wont turn on at all and i believe the battery is dead and it wont charge.
ive read about this issue with other galaxy tabs (2,3) and i need to open up and disconnect battery, i will try this when i get home. i hope it does something after. i just got this thing.
i cant just flash the good twrp instead of one over the other?
Click to expand...
Click to collapse
I don't know. I'm just telling you what I did. I didn't try that way.
please keep in mind, that I only own a note2 lte
If something isn't working, you need to provide a logcat. Otherwise it won't get fixed. I can't reproduce things myself!
New build up
big thx to @sbrissen for his help and many of the device fixes
not working:
Wifi must be turned on, (doesn't need to be connected just has to be on) otherwise you may experience reboots when screen turns off.
gps
cm cam?
Click to expand...
Click to collapse
working:
everything else
Click to expand...
Click to collapse
In any case, please provide logcat and/or last_kmsg if something isn't working as expected.
Disable sim pin lock before flashing! It's known to be broken on other devices and would cause your simcard to be locked permanently (you would need to order a new one).
Rom:
https://mega.co.nz/#!IE1kmTpT!C_xHggO3tQaRCm3BDt6WauNJaSTVUA2jEZ-rjcmNP7Q
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
reserved .....
DerTeufel1980 said:
reserved .....
Click to expand...
Click to collapse
Thanks for your GPS fix by the way.
@DerTeufel1980 Thank you dude. How can I disable the sim lock, by turning airplane mode on?
infrag said:
Thanks for your GPS fix by the way.
Click to expand...
Click to collapse
Your welcome ?
Did you successfully build cm12 yourself? Do you get unknown baseband issue?
limnaln said:
@DerTeufel1980 Thank you dude. How can I disable the sim lock, by turning airplane mode on?
Click to expand...
Click to collapse
Setting security sim pin. This needs to be set on your current rom, before flashing this one.
DerTeufel1980 said:
Your welcome ?
Did you successfully build cm12 yourself? Do you get unknown baseband issue?
Setting security sim pin. This needs to be set on your current rom, before flashing this one.
Click to expand...
Click to collapse
Hi!
First of all, thanks for your work! But I couldn't get into the rom, it's stuck on the boot logo every time.
Could be selinux related. I didn't disable it, to see if baseband is working with it.
Can you get me a logcat please? Then I'll upload a new one in few hours (hopefully)
Keep in mind, I don't own this device. Without logs, nothing is going to happen
DerTeufel1980 said:
Could be selinux related. I didn't disable it, to see if baseband is working with it.
Can you get me a logcat please? Then I'll upload a new one in few hours (hopefully)
Keep in mind, I don't own this device. Without logs, nothing is going to happen
Click to expand...
Click to collapse
If you tell me how to give you one,of course.
DerTeufel1980 said:
Your welcome ?
Did you successfully build cm12 yourself? Do you get unknown baseband issue?
Setting security sim pin. This needs to be set on your current rom, before flashing this one.
Click to expand...
Click to collapse
Didnt try CM by itself no.
Nameless boots & so does Archi and they are based on CM. Didnt check to see if baseband was working I can try if your interested. (maybe i should compare radio logs so it may be a good idea)
I have Omni booting and Slim though.. they have no baseband as yet. I've tried this : https://gerrit.omnirom.org/#/c/10593/ with a few other things but no luck yet.
---------- Post added at 06:22 AM ---------- Previous post was at 06:21 AM ----------
zimonyini said:
If you tell me how to give you one,of course.
Click to expand...
Click to collapse
How to make Useful logs:
http://forum.xda-developers.com/showthread.php?t=2185929
DerTeufel1980 said:
Could be selinux related. I didn't disable it, to see if baseband is working with it.
Can you get me a logcat please? Then I'll upload a new one in few hours (hopefully)
Keep in mind, I don't own this device. Without logs, nothing is going to happen
Click to expand...
Click to collapse
Hope its good. Sent it from amcha rom
Finally someone steps up to develop/port a lollipop rom for i9305 and he doesn't even own the device. Respect dude! I really appreciate your baldness
zimonyini said:
Hope its good. Sent it from amcha rom
Click to expand...
Click to collapse
You were taking this log, while you have been in the bootloop of my rom? If so, how did you flash it? There were some logs which seemed to be caused by touchwiz stuff.
Please format system, wipe data, and then reflash just the rom, without gapps.
If it still fails to boot, get me another log.
Everyone else can also feel free to do so.
Nice work mate... Sorry I couldn't do it myself lol. Just not enough knowledge. Hope we can get ril fully working soon
Sent from my GT-I9305 using XDA Free mobile app
DerTeufel1980 said:
You were taking this log, while you have been in the bootloop of my rom? If so, how did you flash it? There were some logs which seemed to be caused by touchwiz stuff.
Please format system, wipe data, and then reflash just the rom, without gapps.
If it still fails to boot, get me another log.
Everyone else can also feel free to do so.
Click to expand...
Click to collapse
O my God! I know you from when I used HellyBean on my S1, it was the best rom for me for a long time, I know it's a bit early to ask espetially since you don't own this device, but is there any chance we will see a HellyBean cm12 for our i9305. Your work is sublime
Can someone dirty flash over lollipop slimpop and see how it goes???
Sent from my GT-I9305 using XDA Free mobile app
You could just take the boot.IMG out and switch them...
Ehh too much effort right now lol
Sent from my GT-I9305 using XDA Free mobile app
infrag said:
You could just take the boot.IMG out and switch them...
Click to expand...
Click to collapse
It boots now but baseband unknown
mermigas said:
It boots now but baseband unknown
Click to expand...
Click to collapse
I didnt say it would fix RIL problems did I? I just said it would boot...
infrag said:
I didnt say it would fix RIL problems did I? I just said it would boot...
Click to expand...
Click to collapse
Correct. But I was just hoping.........:crying:
Lineage & RR are great ROMs (MoKee is a misunderstanding), but I was looking for something lighter on resources.
Since nothing else was on the market, I got to building PureNexus for lithium.
Below is the 1st build; please test & report.
I have not tried it yet as I'm going on a trip.
OP will be corrected after the weekend.
Credits go to Lineage, PureNexus & of course @pappschlumpf.
Missing credits will be added (let me know).
Download: MOD EDIT: Download link removed; the build obviously doesn't boot.
If you want a rom that is stable, fast, light and close to stock aosp with a few important customizations then purenexus is for you.
Thank you very much adwinp ?
Sent from my MI Mix using Tapatalk
Uouuu... This device is getting better and better every week. Thanks mate!
.
Low battery usage is my priority so I 'll be using this to see the difference with lineage os, also are there any low battery kernels ?
For me it´s not booting stays on Android logo ( Lineage OS boots perfectly ) . What am i doing wrong ?
YazumiWuHung said:
For me it´s not booting stays on Android logo ( Lineage OS boots perfectly ) . What am i doing wrong ?
Click to expand...
Click to collapse
Same here. Keep showing android logo. Not booting.
İ give it a try ?
egentreri said:
İ give it a try ?
Click to expand...
Click to collapse
Egentreri please tell us if it boots properly for you ...i don´t know what i´m doing wrong hmphhh. Thanks in advance.
Not booting
Might have to wait for the OP to get back from vacation so he can test it more thouroughly
SantinoInc said:
Might have to wait for the OP to get back from vacation so he can test it more thouroughly
Click to expand...
Click to collapse
Not booting also...I think the OP is not serious to publish without trying himself...bad !
not booting whatever I tried
hovnovice said:
Not booting also...I think the OP is not serious to publish without trying himself...bad !
Click to expand...
Click to collapse
He is. That's what we do here. Test and report. Then we thank them from the bottom of our hearts and then (optional) we donate!
Sent from my MI Mix using Tapatalk
mohammed510 said:
He is. That's what we do here. Test and report. Then we thank them from the bottom of our hearts and then (optional) we donate!
Sent from my MI Mix using Tapatalk
Click to expand...
Click to collapse
Sorry , i am mot a tester, I am a user . And when its good I always donate (Several timies to Papps.. for instance)
N.B : In this case , what do you want to test if it does not even boot.--? (you back your ROM , download this one , install it and it does not boot...if you feel happy with , good for you )
Have you tried to flash my kernel?
pappschlumpf said:
Have you tried to flash my kernel?
Click to expand...
Click to collapse
I will try and report
hovnovice said:
Not booting also...I think the OP is not serious to publish without trying himself...bad !
Click to expand...
Click to collapse
As mentioned in the OP, I posted just before going on a trip & will work on the build once I come back.
I don't have access to my build machine for now.
In the meantime, I thought it would be useful to query for feedback in order to have pertinent data for troubleshooting.
Any such feedback is welcome: have u tried flashing papps' kernel?
Are you able to share logs?
adwinp said:
As mentioned in the OP, I posted just before going on a trip & will work on the build once I come back.
I don't have access to my build machine for now.
In the meantime, I thought it would be useful to query for feedback in order to have pertinent data for troubleshooting.
Any such feedback is welcome: have u tried flashing papps' kernel?
Are you able to share logs?
Click to expand...
Click to collapse
I tried with kernel Papps ...not booting either
Thread closed - OP, please PM me once your builds boot and I'll reopen the thread.
Hello all
I'm here providing u with a stock kernel that has DT2W feature
note: this is not my work, i'm just mirroring it from 4pda.ru
https://4pda.ru/forum/index.php?showtopic=773750&st=180#entry58004282
To enable DT2W, u can use the app provided(it's a widget)
or using kernel auditor in the "Wake" tab
DT2W.zip is source code for dt2w feature if anyone wants to port to other kernels
I glad to know that my kernel is needed to people!
.//Hack said:
I glad to know that my kernel is needed to people!
Click to expand...
Click to collapse
everyone wants dt2w feature, dude
Thanks for the awesome work u've made
How to use it. Pl give detail. Can I use it in custom ROM like RR??
It is only for MIUI. this is the stock kernel with features.
.//Hack said:
It is only for MIUI. this is the stock kernel with features.
Click to expand...
Click to collapse
Can I flash this over LineageOS? I know that the kernel will be changed. Will I face any other issues?
How to use?
.//Hack said:
I glad to know that my kernel is needed to people!
Click to expand...
Click to collapse
Thanks for your effort to our device sir. What's the dt2w.zip?
Sent from my Redmi 3X using Tapatalk
jmmigo said:
Thanks for your effort to our device sir. What's the dt2w.zip?
Click to expand...
Click to collapse
Double Tap to Wake screen supported kernel for MIUI
very nice work but on my device reboot to recovery dont work after flash this!
edit: flashing reboot fix will solve this issue
jmmigo said:
Thanks for your effort to our device sir. What's the dt2w.zip?
Sent from my Redmi 3X using Tapatalk
Click to expand...
Click to collapse
Sorry I didn't read first post carefully.
Sent from my Redmi 3X using Tapatalk
.//Hack said:
It is only for MIUI. this is the stock kernel with features.
Click to expand...
Click to collapse
I tried with miui pro, but while I flashed it said flashing aborted due to splitting problem (or sthing like that)
After that I couldn't boot up my device. Can you please help me what to do?
dabi01 said:
I tried with miui pro, but while I flashed it said flashing aborted due to splitting problem (or sthing like that)
After that I couldn't boot up my device. Can you please help me what to do?
Click to expand...
Click to collapse
U can flash stock boot.img again using recovery
william.johhn7! said:
Can I flash this over LineageOS? I know that the kernel will be changed. Will I face any other issues?
Click to expand...
Click to collapse
Soviet V3 is getting closer to finish d2w is in testing
How much time to wait for DT2W?
harnamgour said:
How much time to wait for DT2W?
Click to expand...
Click to collapse
We don't ask ETAs here
Do it for custom please...
First of all thanks for this feature! I've tried to flash the kernel but twrp gives me an error :s
Is a twrp version problem maybe? I'm using fedosis twrp (3.1.1.0)
Regards! And thanks again!
Thanks but..
Hey thanks.. But the installation fails due to splitting boot image error
Flash it using other twrp, that was the problem for me too
Hey,
since @HridayHS seems to have stopped working on LOS 14.1 I decided to continue and finish his work. Unfortunately I don't own the device so I am very dependent on you guys as testers at this point.
Below is a first build linked that was just freshly built but I have no idea if it even boots (it should though). Please test it and report back. Thank you!
What's working:
-> nothing
What's not working:
-> The builds do *NOT* boot yet! Thus I removed the download links for now to avoid confusion.
Downloads:
MOD EDIT: Removed link to broken, untested builds.
The first boot will take quite a long time as I disabled compile-time optimizations for now. I will include them in later stages of development again but first I wanna have a working image
If it boots, great! Test everything and let me know what works and what does not. If it does *not* boot please post a last_kmsg and logcat if possible
Sources:
https://github.com/visi0nary/android_kernel_xiaomi_msm8937
https://github.com/visi0nary/android_device_xiaomi_land
https://github.com/visi0nary/android_vendor_xiaomi_land
Thanks to:
-> @TheStrix
for kenzo base
-> @zwliew
-> @HridayHS
-> @fedosis
-> @billchen1977 (for the camera patches)
Supporters:
These awesome people help to keep the project alive! Thank you!
-> @rionline twice! dawg!
-> @Chefov01
-> @shankar_vl
-> @fedosis
-> @Bonoboo
one moar
Yipeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee, thanks! Will test and let you know what's working ?
BlueFlame4 said:
As you might have guessed I don't own a Redmi 3s at the moment. Even though I would like to push LOS 14.1 for this device I cannot afford one at the moment. If you want to support the development, feel free to donate some bucks so I can buy a device. Thank you!
Currently collected funds:
I will update this counter daily.
10€/110€
Click to expand...
Click to collapse
pls give the account info wherein to deposit the donation. if you have PayPal account, give the link to the account.
Will test this.
Fast downloads . BTW, why is the zip file only 152MB? That seems way too small for an arm64.. Correct me if I'm wrong.
shankar_vl said:
pls give the account info wherein to deposit the donation. if you have PayPal account, give the link to the account.
Click to expand...
Click to collapse
Have a look to the left https://forum.xda-developers.com/donatetome.php?u=3784300 Thanks for wanting to donate
nichcream said:
Will test this.
Fast downloads . BTW, why is the zip file only 152MB? That seems way too small for an arm64.. Correct me if I'm wrong.
Click to expand...
Click to collapse
I was wondering about the same but I guess it's due to missing optimizations (dex2oat will run on first bootup and not at compile time).
Edit: You might still be right. Something's wrong with the vendor folder... Let's see...
Hi your rom`s doing bootloops. It doesn´t reach the los-logo.
I combined with every other N-Kernel for our device: stuck @ mi-logo.
Voodoojonny said:
Hi your rom`s doing bootloops. It doesn´t reach the los-logo.
I combined with every other N-Kernel for our device: stuck @ mi-logo.
Click to expand...
Click to collapse
Same here
Every feedback welcome here those who flashed it
Not booting up
And in my case stuck at mi logo
I think i used dualboot patcher thats why
I will test again without dualboot and tell
And to every tester i suggest to make full emmc dump of yr device for safety in case any hardbrick occurs
thanks for informing. will test the next build.
Now I combined your kernel with rr5.8.3, rr5.8.2 and Los14.1 still reboot every 5 sec.
It seems to be something wrong with your boot.img
how to make emmc dump?
addy692 said:
Not booting up
And in my case stuck at mi logo
I think i used dualboot patcher thats why
I will test again without dualboot and tell
And to every tester i suggest to make full emmc dump of yr device for safety in case any hardbrick occurs
Click to expand...
Click to collapse
What is this? https://visi0nary.de/builds/full/recovery-lineageos-unofficial-d855-20170627.img
Okay, thanks! I think I already found the problem. Running a new build now
harsh-sh!t said:
What is this? https://visi0nary.de/builds/full/recovery-lineageos-unofficial-d855-20170627.img
Click to expand...
Click to collapse
Check: https://visi0nary.de/builds/device-list.txt
It a recovery for the LG G3 - nothing for you guys, sorry
I´m using dualboot too... takes to much time backing up everything everytime...
But I don´t think dualboot is the reason. Every other rom boots fine with dualboot.
BlueFlame4 said:
Okay, thanks! I think I already found the problem. Running a new build now
Click to expand...
Click to collapse
Great
BlueFlame4 said:
Okay, thanks! I think I already found the problem. Running a new build now
Check: https://visi0nary.de/builds/device-list.txt
It a recovery for the LG G3 - nothing for you guys, sorry
Click to expand...
Click to collapse
I know it's not for our device but which recovery is it?
harsh-sh!t said:
I know it's not for our device but which recovery is it?
Click to expand...
Click to collapse
Los recovery, it's like stock recovery
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
Hemansh said:
Same here
Click to expand...
Click to collapse
Did you also try it with dual boot?
austinpinto said:
how to make emmc dump?
Click to expand...
Click to collapse
Google it up
U can do so using terminal