Database Info

need help with magisk root, twrp and xposed (update 2017)?

Hey all,
Just purchased a LG U2 and now trying to make it work in the way i want it.
All informations here seem very old, so I wanted to open an update thread, with all what is possible on th lgu2, while
I found only very outdated informations...:crying:
So far:
First I setup the watch with AW2.0, after that flashed twrp 3.1.1.0 and supersu wear 2.82
I managed to get busybox installed and wanted further add Xposed.
There my problem starts, flashing xposed didn't work out.
So right after that, I switchd to Magisk root, to try work with the modules supplied.
(Steps -> use script UnSU, after that flash boot.img again, than flash MAgisk through twrp)
But after that the same with the modules. I try to install busybox, magisk tell me its no magisk module (i've downloaded the module and pushed it on the sd through adb, while the download button isn't reachable in magisk dialogue menu)
in twrp the module tells me there is no magisk installed.
so how can we go on from here? is there a way to make it all work?
did somebody try to change dpi and download the module directly through magisk? does it work?
also if somebody could help with an updated list of sideload able full android apps?
would need an email that can handle at least two accounts directly on the watch (please not advice outlook, its working from the phone i know)
thanks to all in advance

sebj84 said:
Hey all,
Just purchased a LG U2 and now trying to make it work in the way i want it.
All informations here seem very old, so I wanted to open an update thread, with all what is possible on th lgu2, while
I found only very outdated informations...:crying:
So far:
First I setup the watch with AW2.0, after that flashed twrp 3.1.1.0 and supersu wear 2.82
I managed to get busybox installed and wanted further add Xposed.
There my problem starts, flashing xposed didn't work out.
So right after that, I switchd to Magisk root, to try work with the modules supplied.
(Steps -> use script UnSU, after that flash boot.img again, than flash MAgisk through twrp)
But after that the same with the modules. I try to install busybox, magisk tell me its no magisk module (i've downloaded the module and pushed it on the sd through adb, while the download button isn't reachable in magisk dialogue menu)
in twrp the module tells me there is no magisk installed.
so how can we go on from here? is there a way to make it all work?
did somebody try to change dpi and download the module directly through magisk? does it work?
also if somebody could help with an updated list of sideload able full android apps?
would need an email that can handle at least two accounts directly on the watch (please not advice outlook, its working from the phone i know)
thanks to all in advance
Click to expand...
Click to collapse
Ok i did a fresh flash.
i see my fault was to install busybox the first time after installing supersu.
did it this time without and mgisk works so far fine. granting access for total commander no problem.
but now another thing. i installed now busybox from the repos in magisk, he say installation successful, but the module isn't there after reboot?
anyone got the same?

sebj84 said:
Ok i did a fresh flash.
i see my fault was to install busybox the first time after installing supersu.
did it this time without and mgisk works so far fine. granting access for total commander no problem.
but now another thing. i installed now busybox from the repos in magisk, he say installation successful, but the module isn't there after reboot?
anyone got the same?
Click to expand...
Click to collapse
another try. i switched back to supersu wear 2.82, installed stericsons busybox. works.
installed xposed sdk25 via twrp, says success, but after reboot xposed installer says no active framework.
i used a systemless framework... will search for the link again.
anybody got it done this way?

Viper4Android Not Able to Install OB12

The thread title says it all. Does anyone know why V4A won't install properly on OB 12? If you install the drivers and reboot, it just asks you to do it all over again on reboot.

Install busybox with magisk, try use v4a legacy version. Try different v4a versions

Burt Squirtz said:
The thread title says it all. Does anyone know why V4A won't install properly on OB 12? If you install the drivers and reboot, it just asks you to do it all over again on reboot.
Click to expand...
Click to collapse
Old version needed 2 reboots the current 2.7.1.6 just requires 1 reboot worked fine for me on OB12.

liam_davenport said:
Old version needed 2 reboots the current 2.7.1.6 just requires 1 reboot worked fine for me on OB12.
Click to expand...
Click to collapse
I discovered the culprit for this. It's AML ( audio modification library) it's simply not compatible with v4a on the newest one plus firmware. As soon as I removed a AML, viper installed

On latest Oxygeon OS 10.3.4 having issues installing ViPER4Android legacy from Magisk.
It keeps asking to reinstall the driver....succeed, reboot...and back to the same message to reinstall the driver.
Does anyone have it working? What did you do?

ViPER4Android 2.7.1 install and Tasker automation
Managed to install the latest ViPER4Android 2.7.1 on Oxygen OS 10.3.4.
Installed the APK which creates a Magisk module and you can then update it from there.
You can find the latest version here: https://labs.xda-developers.com/store/app/com.pittvandewitt.viperfx
Driver installs with no issues and seems to work fine though all profiles got converted to the new format it uses in 2.7.1
Tasker automation also broke since the app commands changed to kill/reload it. For anyone interested, these are the new shell commands to use in Tasker to automate bluetooth profile switching in Tasker.
Code:
cp /sdcard/Android/data/com.pittvandewitt.viperfx/files/Preset/Headphone1/bt_a2dp.xml /data/data/com.pittvandewitt.viperfx/shared_prefs/bt_a2dp.xml
killall process.ViPER4Android
am start -n com.pittvandewitt.viperfx/com.pittvandewitt.viperfx.MainActivity
Launch app: Spotify
Run each as root. Repeat for each device you want it to switch settings for. These actions are activated when a bluetooth headset connects.

"Winbank mobile" Banking app isn't working.

I uninstalled magisk and then tried to run banking app and it didn't.After installing again magisk and enabled magisk hide it didn't run again.So I wiped and flashed other ROM. Installed again magisk but and hide it but again the banking app didn't work. It is also not running without magisk anymore. I don't know what is exactly checking and I can't run it anymore.Someone with any idea? And maybe a method to solve it ?

Most banking / payment apps today detect whether a phone got tampered or not. AFAIK you can't bypass this.

jwoegerbauer said:
Most banking / payment apps today detect whether a phone got tampered or not.
Click to expand...
Click to collapse
Is there any method to make it work again?This could be a reason to not root and flash custom ROM again.Also I know that this app works to other people with rooted phone

imichalakis said:
Is there any method to make it work again?This could be a reason to not root and flash custom ROM again.Also I know that this app works to other people with rooted phone
Click to expand...
Click to collapse
You can't download banking apps when your device is not Play Protect certified. Just restore your stock rom release key fingerprint or use universal safetynet fix by kdragon

imichalakis said:
Also I know that this app works to other people with rooted phone
Click to expand...
Click to collapse
Wondering why you don't ask these others how they managed it?

jwoegerbauer said:
Wondering why you don't ask these others how they managed it?
Click to expand...
Click to collapse
They only did magisk hide to the app. I also installed kdragon universal safety fix but even isnt working. It worked only when i reverted to stock via Odin.Then again rooted and installed custom but it doesnt want to work

ineedroot69 said:
You can't download banking apps when your device is not Play Protect certified. Just restore your stock rom release key fingerprint or use universal safetynet fix by kdragon
Click to expand...
Click to collapse
How can I restore to the stock ROM release key fingerprint. When reverted back to stock ROM it worked but how can I from a custom ROM?

imichalakis said:
How can I restore to the stock ROM release key fingerprint. When reverted back to stock ROM it worked but how can I from a custom ROM?
Click to expand...
Click to collapse
go-to play store then setting then scroll down bottom and look if it say device is certified or not

ineedroot69 said:
go-to play store then setting then scroll down bottom and look if it say device is certified or not
Click to expand...
Click to collapse
It says Device is certified

imichalakis said:
It says Device is certified
Click to expand...
Click to collapse
then what is your problem?
winbank is detecting magisk?how is isn't working?

It crashes when its loading . It just stops before to show anything.Only the yellow logo when starting.

ineedroot69 said:
then what is your problem?
winbank is detecting magisk?how is isn't working?
Click to expand...
Click to collapse
It doesn't detect magisk.The problem starts when I am in custom ROM even before install magisk.

any solution to recommend?

I had problem with Winbank and couldn't launch it. The problem was solved by uninstalling Edxposed Manager apk (No Edxposed or riru which have been flashed via Magisk or any Edxposed module but only Edxposed Manager). I replaced Edxposed Manager with LSPosed which is similarly.

Johnn78 said:
I had problem with Winbank and couldn't launch it. The problem was solved by uninstalling Edxposed Manager apk (No Edxposed or riru which have been flashed via Magisk or any Edxposed module but only Edxposed Manager). I replaced Edxposed Manager with LSPosed which is similarly.
Click to expand...
Click to collapse
I didn't even install edxposed manager. The problem was there even before installing magisk.

imichalakis said:
I didn't even install edxposed manager. The problem was there even before installing magisk.
Click to expand...
Click to collapse
For me, I couldn't load Winbank because it was constantly crashes and after hours of searching I saw that when I unistall Edxposed Manager thne the problem was solved. Yoy may have some similar app which the programmer consider this as danger for winbank and for this reason it is crashed. Try to unistall one by one app to see if it would be fixed. If it is due to some app then it would be some app which has "hack" activities like magisk, luckypatcher, ed xposed etc...

Johnn78 said:
I had problem with Winbank and couldn't launch it. The problem was solved by uninstalling Edxposed Manager apk (No Edxposed or riru which have been flashed via Magisk or any Edxposed module but only Edxposed Manager). I replaced Edxposed Manager with LSPosed which is similarly.
Click to expand...
Click to collapse
I have been puzzled with this for a week and you solved my problem. Everything was working (gpay, spay through watch, other banking apps etc) except the !$%&*ng Winbank. I had never heard of LSPosed, but I followed your advice, and now is working pefrectly! Well done!!! Thanks
Εισε μεγαλος!!!

christis said:
I have been puzzled with this for a week and you solved my problem. Everything was working (gpay, spay through watch, other banking apps etc) except the !$%&*ng Winbank. I had never heard of LSPosed, but I followed your advice, and now is working pefrectly! Well done!!! Thanks
Εισε μεγαλος!!!
Click to expand...
Click to collapse
if you installed EdXposed the first thing you must do is add "Google Play Service" on EdXposed blacklist so apps don't detect EdXposed ... thou it's great to hear that LSposed works for you

ineedroot69 said:
if you installed EdXposed the first thing you must do is add "Google Play Service" on EdXposed blacklist so apps don't detect EdXposed ... thou it's great to hear that LSposed works for you
Click to expand...
Click to collapse
The Edxposed blacklist hides the modules
christis said:
I have been puzzled with this for a week and you solved my problem. Everything was working (gpay, spay through watch, other banking apps etc) except the !$%&*ng Winbank. I had never heard of LSPosed, but I followed your advice, and now is working pefrectly! Well done!!! Thanks
Εισε μεγαλος!!!
Click to expand...
Click to collapse
Hi again. I found and another solution. Because I wanted to keep the Edxposed instead to have the LSPosed (neither I know about LSPosed and I learnt it at this time when I was trying to find the solution) and I installed Sudohide with which you can hide some app to be invisible from some other app and I selected Edxposed to not be visible from Winbank and now works properly the Edxposed and Winbank simultaneously.

Johnn78 said:
The Edxposed blacklist hides the modules
Hi again. I found and another solution. Because I wanted to keep the Edxposed instead to have the LSPosed (neither I know about LSPosed and I learnt it at this time when I was trying to find the solution) and I installed Sudohide with which you can hide some app to be invisible from some other app and I selected Edxposed to not be visible from Winbank and now works properly the Edxposed and Winbank simultaneously.
Click to expand...
Click to collapse

Fully rooted but cannot make changes to internal apps, etc.

Hi all,
Am on Android 10 and phone has the latest TWRP, Magisk and busy box. In Magisk the Ramdisk is a YES. Titanium can disable internal apps no problem and seemingly uninstall them but after restarting the phone those apps re-appear. Also, though the latest MixPlorer and Root Explorer can edit/change Mixer_Paths, the original values come back after restarting the phone.
Can anyone advise how to solve this mystery.
Thanks in advance.

A10 and later , doesn't allow changing system files you need to do this via a magisk module systemless.

@soka said:
A10 and later , doesn't allow changing system files you need to do this via a magisk module systemless.
Click to expand...
Click to collapse
Thanks for that. I googled 'magisk module systemless' but it came up with loads of different things. Not sure what I should look for.

Use the magisk module Debloater from magisk repo, you also need BusyBox module and Termux app from playstore.

RokCruz said:
Use the magisk module Debloater from magisk repo, you also need BusyBox module and Termux app from playstore.
Click to expand...
Click to collapse
Much appreciated. Cheers

Trying to hide root from Play Store but can't install modules in Magisk now

I've managed to hide root from the apps themselves by installing the Universal SafetyNet Fix and enabling Zygisk (Beta) and Enforce DenyList and adding the apps to the DenyList and I can use all the apps but now Play Store won't let me update Netflix or Revolut, as it says they're no longer compatible with my device.
I've now hidden the Magisk app, which hasn't helped, and I'm trying to install the Shamiko module from Telegram but if I choose "Normal Android Way" Magisk just closes and if I choose "File Way" it says "Unzip error". This isn't specific to the Shamiko zip though, it happens if I try to reinstall the Universal SafetyNet Fix zip.
I'm using the latest Magisk v24.1, although I notice that on the Home screen it says "Zygisk: No" even though it's enabled. The only other modules installed are Busybox, Call Recorder and Systemless Hosts.
EDIT: Nevermind. I found that this only happens when trying to install using ES File Explorer. If I use the default File Manager it works OK.
EDIT2: So I followed the steps here, from "Setup Fingerprint", setting it to Poco X3 NFC Global - Android 11, and cleared the data&cache for Play Store and Play Services and rebooted, and now the Play Store doesn't even show Netflix or Revolut, either in the list of installed apps or when I search for them. https://forum.xda-developers.com/t/rom-11-lineageos-official-surya-karna.4202533/post-84100067
EDIT3: I disabled "Enforce DenyList" and enabled the Shamiko (v0.4.3) module instead and rebooted and cleared the Play Store and Play Services cache again and now I'm back to where I was before, with Netflix and Revolut showing in the installed apps list (but not when I search for them) and unable to update as it says they're no longer compatible with my device.
EDIT4: Updated Universal SafetyNet Fix to v2.2.1 and used adb props to Force Basic Key attestation to surya (default value, was M200....). No change. Checking Safety Net with Root Checker says it fails.

Magisk 24.1, enabled Zygisk, enabled DenyList, added all Google apps to the DenyList. Renamed the Magisk package name.
Flashed kdrag0n's Universal SafetyNet fix, installed MagiskHide Props, enabled the surya fingerprint and forced basic attestation. All on LineageOS 18.1. Works fine, no issues so far. Didn't even need to clear data or cache for any apps, just rebooted the phone.

robogo1982 said:
Magisk 24.1, enabled Zygisk, enabled DenyList, added all Google apps to the DenyList. Renamed the Magisk package name.
Flashed kdrag0n's Universal SafetyNet fix, installed MagiskHide Props, enabled the surya fingerprint and forced basic attestation. All on LineageOS 18.1. Works fine, no issues so far. Didn't even need to clear data or cache for any apps, just rebooted the phone.
Click to expand...
Click to collapse
I'm using MIUI but I've literally done all of that and I still can't update Netflix or Revolut.
As explained by Lughnasadh here https://forum.xda-developers.com/t/magisk-module-universal-safetynet-fix-1-1-0.4217823/post-86463103 we can't actually add Google Play Services to the DenyList, as doing so breaks USNF and it unticks automatically on reboot anyway. So I think all we can add to the list is Google Play Store.

doveman said:
I'm using MIUI but I've literally done all of that and I still can't update Netflix or Revolut.
As explained by Lughnasadh here https://forum.xda-developers.com/t/magisk-module-universal-safetynet-fix-1-1-0.4217823/post-86463103 we can't actually add Google Play Services to the DenyList, as doing so breaks USNF and it unticks automatically on reboot anyway. So I think all we can add to the list is Google Play Store.
Click to expand...
Click to collapse
Why don't you guys simply stick to Magisk 23.0? Everything works fore with that version of Magisk

Noter2017 said:
Why don't you guys simply stick to Magisk 23.0? Everything works fore with that version of Magisk
Click to expand...
Click to collapse
I seem to have fixed this now by changing the device fingerprint from POCO X3 NFC Global to POCO X3 NFC Europe.

I have issues after the playstore updates. I can delete all data and at old version device is certified. But it updates itself and it's problem then on. Anyway to stop the playstore self update?

You could try Magisk's Detach module -- online repo is deprecated, but it is still around if you search for it...

I've had same issue about Revolut, I think Nerflix uses similar spies. but telling story short: I downloaded Revolut from ApkPure and cheched it on DenyList, reboot aaaaasaaaaaand it's all done, Revolut is getting updates and works as usuaully