Don´t know if anybody has tried or mentioned yet, here my experience:
I´m running Xposed since yesterday without any issues. The only module I´m using yet is Gravitiy box, of course, not everything ist compatible with the OP6 (e.g. navbar settings make some issues), but mostly it seems to work. Other modules I haven’t testet yet.
Instruction
- don’t forget, I´m not responsible for any sh.. happens. I tried different ways, all worked, this is one of them.
- For rooted devices only, Magisk has to be installed
- Download the xposed module in Magisk: Xposed Framework (SDK 27) 90.2-beta 3 systemless
- Download xposed installer apk and install it on OP6.
- When opening the installer it shows that the Framework is not installed. So I click the first line (“install”, not the second one “install via recovery" – don´t know what would happen then).
- You see the information, that the Framework is downloading. But then there comes an error massage, ignore it.
- Go back to Magisk and tick the box of the Xposed Module to activate it, reboot.
- After reboot open Xposed installer again and activate it (slider to the right)
- Reboot again. Now everything should be on the right place and appear green
That´s it, enjoy
Flying Fox said:
Don´t know if anybody has tried or mentioned yet, here my experience:
I´m running Xposed since yesterday without any issues. The only module I´m using yet is Gravitiy box, of course, not everything ist compatible with the OP6 (e.g. navbar settings make some issues), but mostly it seems to work. Other modules I haven’t testet yet.
Instruction
- don’t forget, I´m not responsible for any sh.. happens. I tried different ways, all worked, this is one of them.
- For rooted devices only, Magisk has to be installed
- Download the xposed module in Magisk: Xposed Framework (SDK 27) 90.2-beta 3 systemless
- Download xposed installer apk and install it on OP6.
- When opening the installer it shows that the Framework is not installed. So I click the first line (“install”, not the second one “install via recovery" – don´t know what would happen then).
- You see the information, that the Framework is downloading. But then there comes an error massage, ignore it.
- Go back to Magisk and tick the box of the Xposed Module to activate it, reboot.
- After reboot open Xposed installer again and activate it (slider to the right)
- Reboot again. Now everything should be on the right place and appear green
That´s it, enjoy
Click to expand...
Click to collapse
Works like a charm didn't get that error you said thou and didn't need to reboot twice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A6003 using Tapatalk
Old news did this already. It wasn't necessary to make a thread for this. You act like you discovered something no one else would ever think of. Lmao
it is pretty helpful for now since we dont have TWRP and not many users know it can be flashed without TWRP
Great work
se7ensde said:
Old news did this already. It wasn't necessary to make a thread for this. You act like you discovered something no one else would ever think of. Lmao
Click to expand...
Click to collapse
You must be fun at parties... not
Skickat från min ONEPLUS A6003 via Tapatalk
@ se7ensde Arrogant much?
By the way the following modules work fine on OP6:
Gravitybox O (of course)
MaxLock
XPrivacyLua
Adblocker Reborn (parallel I´ve Adaway installed)
Flat Style Bar Indicators
I just tell because I also have installed a module for changing navbar (unfortunately forgot the name) and bricked my phone. Fortunately the community here makes it easy to solve any problem
@Flyingbox Thank you! Was waiting for some more confirmations.
@ se7ensde Thank you for your valuable contribution. [emoji57]
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
Flying Fox said:
By the way the following modules work fine on OP6:
Gravitybox O (of course)
MaxLock
XPrivacyLua
Adblocker Reborn (parallel I´ve Adaway installed)
Flat Style Bar Indicators
I just tell because I also have installed a module for changing navbar (unfortunately forgot the name) and bricked my phone. Fortunately the community here makes it easy to solve any problem
Click to expand...
Click to collapse
upload pack files
Reb0rn said:
Works like a charm didn't get that error you said thou and didn't need to reboot twice View attachment 4510183
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Couldn't get it to work. Installed Xposed apk 2.7 experimental 1, but the Install/Update button is greyed out.
slonn said:
Couldn't get it to work. Installed Xposed apk 2.7 experimental 1, but the Install/Update button is greyed out.
Click to expand...
Click to collapse
It can be tricky sometimes. Maybe got to Magisk, install framework again and reboot.
Flying Fox said:
It can be tricky sometimes. Maybe got to Magisk, install framework again and reboot.
Click to expand...
Click to collapse
Tried that, still no luck. What Xposed APK are you using?
Was hoping to use MaxLock via Xposed
Sent from my [device_name] using XDA-Developers Legacy app
slonn said:
Tried that, still no luck. What Xposed APK are you using?
Was hoping to use MaxLock via Xposed
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
I have Xposed installer version 3.1.5 and Xposed Framework (SDK 27) 90.2-beta3 (Systemless) as Magisk module.
Flying Fox said:
I have Xposed installer version 3.1.5 and Xposed Framework (SDK 27) 90.2-beta3 (Systemless) as Magisk module.
Click to expand...
Click to collapse
This is what I'm using too, and it installed without a hitch. Running Amplify, GB, and Greenify.
Will this break android pay?
Thank you.
wuilly said:
Will this break android pay?
Thank you.
Click to expand...
Click to collapse
Not if you hide it in Magisk. I hid most of the Google apps and services to be safe, and it set up just fine.,
Yes, xposed will break Google Pay.
This broke my playstore. It keeps crashing? Any ideas?
Edit: fixed
works perfectly for me. thank you
I have installed Xposed installer apk 3.1.5 and it worked rightaway, withoud any errors (also firsy choii, not through recovey). Of course you need still need root.
What's the best app locker with fingerprint?
Related
Guys xposed framework works perfectly on moto g4 plus.
I tried using the latest version (v85) but my mobile data wasn't working but with version (v78) everything works fine.
so here is what you need to do.
1.) root your phone, install custom recovery. There are plenty of threads for that.
2.) download xposed flashable zip and xposed installer from http://forum.xda-developers.com/showthread.php?t=3034811
remember download sdk 23 and ARM v78 or if you want to experiment you can download new versions.
3.) flash the zip file in recovery and install the installer file after reboot.
4.) congrats you have the xposed now download the modules and enjoy. (try android N-ify it's awesome)
Ohh but i am using v85 without any network issues. Just had to remove the ad blocker as it interfered with a few Google services.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Moto G (4) using Tapatalk
I'm using xposed v85 with no issues, ad blocker also works perfectly. if ad blocker interferes with google services try disabling and enabling the ad blocking. cheers.
Using v85 and no issue until now ?
Sent from my Moto G (4) using Tapatalk
Can anyone give me exact download link M confused I mean exact file link pls
Can I use v86? Will it work fine? has anyone tested it?
Does anyone has try systemless xposed
yash989 said:
Can anyone give me exact download link M confused I mean exact file link pls
Click to expand...
Click to collapse
Here's the link to the different versions which ever you want to try, at your own risk of course.
Installer APK: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
v78 (the one hes using): http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v78-sdk23-arm.zip
v85 (newest one reported working): http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v85-sdk23-arm.zip
v86 (newest one, fully working for me): http://dl-xda.xposed.info/framework/sdk23/arm/xposed-v86-sdk23-arm.zip
Uninstaller (in case you need it): http://dl-xda.xposed.info/framework/uninstaller/xposed-uninstaller-20150831-arm.zip
You're welcome
burninitup said:
Guys xposed framework works perfectly on moto g4 plus.
I tried using the latest version (v85) but my mobile data wasn't working but with version (v78) everything works fine.
so here is what you need to do.
1.) root your phone, install custom recovery. There are plenty of threads for that.
2.) download xposed flashable zip and xposed installer from http://forum.xda-developers.com/showthread.php?t=3034811
remember download sdk 23 and ARM v78 or if you want to experiment you can download new versions.
3.) flash the zip file in recovery and install the installer file after reboot.
4.) congrats you have the xposed now download the modules and enjoy. (try android N-ify it's awesome)
Click to expand...
Click to collapse
I can confirm that v86 is fully working for me.
blackra1n said:
I can confirm that v86 is fully working for me.
Click to expand...
Click to collapse
Same here. Just installed v86 today. Everything works fine.
Sent from my Moto G4+ using Tapatalk.
zazzy24 said:
Same here. Just installed v86 today. Everything works fine.
Click to expand...
Click to collapse
Great! I strongly recommend Android N-ify from the downloads section. It's awesome
blackra1n said:
Great! I strongly recommend Android N-ify from the downloads section. It's awesome
Click to expand...
Click to collapse
Yes i was using that module even on v85.. Pretty cool [emoji106]
Sent from my Moto G4+ using Tapatalk.
Anyone try the v86 for sdk23 yet. Does it work normally ?
cool_sid said:
Anyone try the v86 for sdk23 yet. Does it work normally ?
Click to expand...
Click to collapse
I have been running it a few days. Have not had any problems. There a few modules not working, but probably user error.
Sent from my Moto G (4) using Tapatalk
does it work with the xt1644 version?
What are the recommended modules?
iammorrongo said:
does it work with the xt1644 version?
Click to expand...
Click to collapse
Yes I'm using it and I've never used xposed on my other phones. It's pretty legit.
v86 working fine for me on xt1640.
Sent from my Moto G (4) using Tapatalk
V86 works cool on xt1643 too.... Sweeeeeet
Hi,
Here several weeks with Xposed v86.5 (Systemless), and this list of active modules:
- Android N-ify
- BootManager
- DirectAPKInstall Module
- GravityBox [MM]
- iFont
- InstallerOpt
- Lock screen clock mods [L-M]
- Lock screen widgets [L-M]
- Roaming Control
- Settings Editor
- SignalIconsAOSP
- WiFi Password
That's all in a Moto G XT1622 ("regular", not Plus).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Xda Users,
This is first magisk module for our razer. It will install stuff that you can see in features section. Only requirement is that you need Magisk and obviously TWRP. As this is magisk module you don't need to worry about system space. Magisk will install app to magisk.img which is mounted in your data partition... This is magic of MAGISK....!
Requirement:
Magisk v15.1 - Root & Universal Systemless Interface [
Procedure:
1. Download magisk_rayglobe_os.zip
2. Goto Magisk Manager > modules > add module > select "magisk_rayglobe_os.zip" using file manager
3. Reboot device.
4. Enjoy systemless Rayglobe world... Happy flashing ...!
Uninstall:
To remove this module simply goto Magisk Manager > modules and delete "magisk_rayglobe_os.zip".
Download:
- Android File Host
Click Me for Changelog:
(Note: Before updating this MOD to new version PLEASE uninstall the previous version (check Uninstall: ) and then install NEW one.)
(Note: Download according to your Magisk version. USE latest Magisk.......)
Features
- Build.prop stuff for volume and more audio steps
- Themed youtube
- Service.jar hacked to delete sign
- Framework-res adjustement to ambient light and dim
- New Miracast flash in settings/video
- AptxHd driver
- IOS 11 emoji
Credits:
@topjohnwu for Magisk and Modules
@Team Bad Boyz for rebooter apk
@KevinnX8 Youtube
@github - link for more information
If I forgot someone please write me in PM and I'll update this section
Reserved
Awesome! Thanks for your work.. We need lots more of these little tweaks and stuff. I'm waiting for center clock with small date and am/pm from roms... Probably #2 thing I miss besides custom kernels.
Keep up the good work!
mikeandjaimie said:
Awesome! Thanks for your work.. We need lots more of these little tweaks and stuff. I'm waiting for center clock with small date and am/pm from roms... Probably #2 thing I miss besides custom kernels.
Keep up the good work!
Click to expand...
Click to collapse
Xposed + Flat Style Bar Indicators
DarkestSpawn said:
Xposed + Flat Style Bar Indicators
Click to expand...
Click to collapse
Ok next version I'll add this.
Blob emoji are the only emoji I want to see. . Thanks for the module.
Anyone get the Google pixel ar stickers working in the camera with this magisk?
https://www.xda-developers.com/enable-google-pixel-ar-stickers-nexus-5x-nexus-6p-oneplus-3-xiaomi-mi-5/
Delete what sign?
Screen mirroring does not works, when you try it it will turn off your phone
mikeandjaimie said:
Awesome! Thanks for your work.. We need lots more of these little tweaks and stuff. I'm waiting for center clock with small date and am/pm from roms... Probably #2 thing I miss besides custom kernels.
Keep up the good work!
Click to expand...
Click to collapse
center clock works with xtended settings app and quite a few others too.xposed needs to be installed first to make it work.this can be done through magisk module downloads
Does anyone have this working for the latest 16.0 magisk? I keep getting an error trying to install it.
sinitik said:
Does anyone have this working for the latest 16.0 magisk? I keep getting an error trying to install it.
Click to expand...
Click to collapse
Yes it's working. Try installing it in recovery.
silvercat said:
Yes it's working. Try installing it in recovery.
Click to expand...
Click to collapse
That's incredibly strange, I tried that prior and then it didn't work. However doing it again later it installed flawlessly. Thank you though.
Any preview screenshots?
Module is awesome, but I can't seem to get aptx working On 8.1 Oreo. I have an aptx headset that I have used with other phones that support aptx for a while, not sure if you can fix this bit would be appreciated.. I'll buy you a beer on payday or something if you can @raimondomartire
Any update @raimondomartire?
It seems that my build.prop is read only, and even magisk modules can't modify it (though other modules like viper are working) - not sure if that helps!
manor7777 said:
I can't seem to get aptx working On 8.1 Oreo
Click to expand...
Click to collapse
I see in developer options there's a Bluetooth codec option that lets you select apt x and apt x hd. Have you set it there and it still doesn't work?
Munk0 said:
I see in developer options there's a Bluetooth codec option that lets you select apt x and apt x hd. Have you set it there and it still doesn't work?
Click to expand...
Click to collapse
Correct
i get flashing error on latest stock OS oreo 8.1 update running magisk 16.4
how do i load this module @raimondomartire ?
manor7777 said:
Module is awesome, but I can't seem to get aptx working On 8.1 Oreo. I have an aptx headset that I have used with other phones that support aptx for a while, not sure if you can fix this bit would be appreciated.. I'll buy you a beer on payday or something if you can @raimondomartire
Click to expand...
Click to collapse
this is not something you can select as you please. aptx will automatically activate when connected to a device that prefers/supports it. if you are connected to a device that you KNOW supports aptx and it's not showing aptx when connected to said device, then you might have a problem.
I installed xposed framework and now Netflix doesn't show in play store. I looked in the settings in play store and it now says my device is not certified. I uninstalled xposed framework and app and disabled it and uninstalled it from magisk and rebooted. Still no Netflix in play store. And still says device not certified. How can I fix this?
vinnievegas said:
I installed xposed framework and now Netflix doesn't show in play store. I looked in the settings in play store and it now says my device is not certified. I uninstalled xposed framework and app and disabled it and uninstalled it from magisk and rebooted. Still no Netflix in play store. And still says device not certified. How can I fix this?
Click to expand...
Click to collapse
Is it rooted? Root may be the problem. You may need to me complete stock for the playstore to have it for the oneplus. Look for an apk on the web. It will work that way but only in 480p.
vinnievegas said:
I installed xposed framework and now Netflix doesn't show in play store. I looked in the settings in play store and it now says my device is not certified. I uninstalled xposed framework and app and disabled it and uninstalled it from magisk and rebooted. Still no Netflix in play store. And still says device not certified. How can I fix this?
Click to expand...
Click to collapse
If you root with magisk ans safetynet passed playstore show you app if safetynet broken by xposed you can't is normal remove xposed or go on apkmirror and dl the apk [emoji6]
Envoyé de mon ONEPLUS A6003 en utilisant Tapatalk
black_file said:
If you root with magisk ans safetynet passed playstore show you app if safetynet broken by xposed you can't is normal remove xposed or go on apkmirror and dl the apk [emoji6]
Envoyé de mon ONEPLUS A6003 en utilisant Tapatalk
Click to expand...
Click to collapse
I'm not sure if this is really true because look at my pictures below I have no Netflix install button or uninstall button.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A6003 using Tapatalk
No netflix in playstore is due to bootloader being unlockedm
lemuren said:
No netflix in playstore is due to bootloader being unlockedm
Click to expand...
Click to collapse
There it is.
lemuren said:
No netflix in playstore is due to bootloader being unlockedm
Click to expand...
Click to collapse
Wrong, it's because xposed breaks safetynet.
TheNetwork said:
Wrong, it's because xposed breaks safetynet.
Click to expand...
Click to collapse
If that was the case then wouldn't I be able to see Netflix in the play store since I pass safety net?
Look 4 posts above this one
Sent from my ONEPLUS A6003 using Tapatalk
tdamocles said:
If that was the case then wouldn't I be able to see Netflix in the play store since I pass safety net?
Look 4 posts above this one
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
With xposed the safetynet are not enabled you dont have the real version of magisk why you have install no official version.
Actual Device : OnePlus 6 Past Devices : Galaxy S6, Xperia Z2, Huawei P7, Nokia 620
black_file said:
With xposed the safetynet are not enabled you dont have the real version of magisk why you have install no official version.
Actual Device : OnePlus 6 Past Devices : Galaxy S6, Xperia Z2, Huawei P7, Nokia 620
Click to expand...
Click to collapse
Where is the "official " Version? I originally tried to install with 16.0 magisk and I couldn't see Netflix then either.
Sent from my ONEPLUS A6003 using Tapatalk
tdamocles said:
Where is the "official " Version? I originally tried to install with 16.0 magisk and I couldn't see Netflix then either.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Go in magisk parameters select the repository in bêta and reinstall with the official magisk 16.4 and you see the xposed broke the safetynet but you can uninstall xposed install Netflix add to magisk hide and reinstall xposed and use Netflix correctly [emoji846]
Actually Devices : OnePlus 6 Past Devices : Galaxy S6, Xperia Z2, Huawei P7, Nokia 620
huh what do you know... I was right... as always
try torrent next time.
such retarded service as Netflix must fully work on my device with any mods or be gone.
You can still download it directly from the Netflix web site.
https://help.netflix.com/en/node/57688
Update...
Uninstalled Xposed and safety net passes now, but still no Netflix in play store.
So I decided I'd flash stock without rooting and start fresh, and still no Netflix in play store.
So I then thought maybe it's because my stock didn't get installed the normal system update way. So I flashed an older stock version and let my phone see the update through the normal way and installed the update, even with a whole different Google account, and still no Netflix in play store. So that being said I think my device is flagged some how in play store. If anyone has anymore solutions let me know.
x111 said:
try torrent next time.
such retarded service as Netflix must fully work on my device with any mods or be gone.
Click to expand...
Click to collapse
kek love the brutal honesty :good:
Try aptoid
If you install Xposed in any way - Magisk or flashing through TWRP - it will break your certified state in Google Play Store. No matter what you do: It will. Period.
And this will cause the vanishing of Netflix. Just uninstalling Xposed itself won't do anything. Follow this post here: https://forum.xda-developers.com/android/development/-t3673617
For myself: I prefer GravityBox over installing Netflix via Google Play. If I need it: APKMirror. And to be honest: I don't really need Netflix on my device. Never did, never will.
Go to play store in settings, force stop, clear data twice. That will recertify play store.
MickyFoley said:
If you install Xposed in any way - Magisk or flashing through TWRP - it will break your certified state in Google Play Store. No matter what you do: It will. Period.
View attachment 4529940
And this will cause the vanishing of Netflix. Just uninstalling Xposed itself won't do anything. Follow this post here: https://forum.xda-developers.com/android/development/-t3673617
For myself: I prefer GravityBox over installing Netflix via Google Play. If I need it: APKMirror. And to be honest: I don't really need Netflix on my device. Never did, never will.
Click to expand...
Click to collapse
This is with magisk. I still don't see Netflix.
Sent from my ONEPLUS A6003 using Tapatalk
Thanks to the hard work of topjohnwu.
the latest version of Magisk 17.2 in the Canary channel bypasses SafetyNet Attestation API,So we can play games like fortnite or fate/grand order,And most of banking apps to which detects root even after hiding that apps in magisk.
This is video guide:
https://youtu.be/7KriI47kIL0
Open Magisk Manager and go to settings.
Look for “Update Channel” and change it to “Custom.”
Paste the following URL into the box:
https://raw.githubusercontent.com/topjohnwu/magisk_files/master/canary_builds/canary.json
Restart the Manager app and install the latest Magisk Canary build.
Once you’re booted back up, open the Manager app again and go to the Magisk Hide menu.
Select Fate/Grand Order or Fortnite Mobile in the list, depending on what you want to play.
Start the game.
Fate/go still not working for me. Im on beta 2.
No luck for me, it still fails when I try to launch FGO or PoGo on Beta 2.
xBastek said:
Fate/go still not working for me. Im on beta 2.
Click to expand...
Click to collapse
cts profile safety net check its still not passing on this version on beta oos try this build prop along with this version and see if game works or not.
https://forum.xda-developers.com/oneplus-6/how-to/guild-to-pass-safetynet-oxygen-android-t3838123
Using IanMacD version... and work...
but don't know with Fortnite... don't play that game
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A6000 using Tapatalk
Vuska said:
Using IanMacD version... and work...
but don't know with Fortnite... don't play that gameView attachment 4592540
Sent from my ONEPLUS A6000 using Tapatalk
Click to expand...
Click to collapse
Where may we get this IanMacD version ?
Link please.
Thanks
michelD said:
Where may we get this IanMacD version ?
Link please.
Thanks
Click to expand...
Click to collapse
here
Dont see the title.. go and read first page
https://forum.xda-developers.com/apps/magisk/unofficial-magisk-v10-beta-built-t3521901
Sent from my ONEPLUS A6000 using Tapatalk
pankspoo said:
cts profile safety net check its still not passing on this version on beta oos try this build prop along with this version and see if game works or not.
https://forum.xda-developers.com/oneplus-6/how-to/guild-to-pass-safetynet-oxygen-android-t3838123
Click to expand...
Click to collapse
I already did that. Still no luck
Work on moto z play 1st but not modules foud
Mine fails safetynet check on stock rom 5.1.11.
I can get it to pass cts by installing "nodevicecheck" from xposed, but basic integrity fails.
slayerh4x said:
Mine fails safetynet check on stock rom 5.1.11.
I can get it to pass cts by installing "nodevicecheck" from xposed, but basic integrity fails.
Click to expand...
Click to collapse
Just check my post up there...
with that version.. IanMcD.. it passed safety check
Sent from my ONEPLUS A6000 using Tapatalk
This version you linked is different than the canary one?
Vuska said:
Just check my post up there...
with that version.. IanMcD.. it passed safety check
Sent from my ONEPLUS A6000 using Tapatalk
Click to expand...
Click to collapse
slayerh4x said:
This version you linked is different than the canary one?
Click to expand...
Click to collapse
Yup...
is it not allowed ?
sorry then, just wanna help ... bcos I'm using it.
will delete my post if it not allowed.
Sent from my ONEPLUS A6000 using Tapatalk
Oh I don't know I was just trying to see.
Which one did you install from that github?
Vuska said:
Yup...
is it not allowed ?
sorry then, just wanna help ... bcos I'm using it.
will delete my post if it not allowed.
Sent from my ONEPLUS A6000 using Tapatalk
Click to expand...
Click to collapse
slayerh4x said:
Oh I don't know I was just trying to see.
Which one did you install from that github?
Click to expand...
Click to collapse
First.. download magisk manager from here :
https://github.com/ianmacd/MagiskBuilds/raw/master/MagiskManager-v5.9.2-2018091201-ianmacd.apk
then, update source change to custom and fill with :
https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
Like he said at his post #2197
1. install MagiskManager-v5.8.4-2018082304-ianmacd.apk
2. Erase the app's data (not just cache).
3. Add my custom update channel.
4. Perform the SafetyNet check (which will cause the new snet.apk with my API key to be downloaded).
It's all i can help..
slayerh4x said:
Mine fails safetynet check on stock rom 5.1.11.
I can get it to pass cts by installing "nodevicecheck" from xposed, but basic integrity fails.
Click to expand...
Click to collapse
try this
https://forum.xda-developers.com/oneplus-6/how-to/guild-to-pass-safetynet-oxygen-android-t3838123
This worked but I had to disable NoLimits module first.
Vuska said:
First.. download magisk manager from here :
https://github.com/ianmacd/MagiskBuilds/raw/master/MagiskManager-v5.9.2-2018091201-ianmacd.apk
then, update source change to custom and fill with :
https://raw.githubusercontent.com/ianmacd/MagiskBuilds/master/updates/ianmacd.json
Like he said at his post #2197
1. install MagiskManager-v5.8.4-2018082304-ianmacd.apk
2. Erase the app's data (not just cache).
3. Add my custom update channel.
4. Perform the SafetyNet check (which will cause the new snet.apk with my API key to be downloaded).
It's all i can help..
Click to expand...
Click to collapse
ScaryXD said:
Work on moto z play 1st but not modules foud
Click to expand...
Click to collapse
its not module but this version itself include patch specifically hide root acess to games like fortnite etc
slayerh4x said:
Mine fails safetynet check on stock rom 5.1.11.
I can get it to pass cts by installing "nodevicecheck" from xposed, but basic integrity fails.
Click to expand...
Click to collapse
Ofcourse. Xposed will always trip safetynet, you have modified /system, if you want safetynet you cant have xposed and viceversa
Shouldn't systemless xposed installed with Magisk pass?
efinityy said:
Ofcourse. Xposed will always trip safetynet, you have modified /system, if you want safetynet you cant have xposed and viceversa
Click to expand...
Click to collapse
Hello everyone, i came from the 5T and am happy about the 8T, I hope you enjoy the 8T so far too!
My question for you guys is what Magisk addons are you using with the 8T and why?
Which addons are you still waiting for?
Post your addon-list and write why you use them.
My Addons (current):
- Energized Protection ## Ad-Blocker, battery friendly.
- Busybox for Android NDK ## Busybox binary, must have.
- Audio Modification Libary ## to use Viper4Android
- Viper4AndroidFX ## works now on Android 11, but you cannot select profiles (current)
- Systemless Host ## for a better work of the AD-Blocker
Pretty much the same except adaway over energized.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my KB2005 using Tapatalk
Just an information, I found a working zip file for Viper4Android.
In this youtube video its explained:
https://www.youtube.com/watch?v=ltbJryJT1gg&feature=youtu.be
Its only a flash of the zip file without any additional modules like AML and stuff. For me this works
smouker said:
Just an information, I found a working zip file for Viper4Android.
In this youtube video its explained:
https://www.youtube.com/watch?v=ltbJryJT1gg&feature=youtu.be
Its only a flash of the zip file without any additional modules like AML and stuff. For me this works
Click to expand...
Click to collapse
OMG yes thank you! I can't live without V4A. It's the only reason why I have to root.
Sent from my KB2005 using Tapatalk
Wilazn said:
OMG yes thank you! I can't live without V4A. It's the only reason why I have to root.
Sent from my KB2005 using Tapatalk
Click to expand...
Click to collapse
Well then we are sitting in the same boat
Living without Viper4Andorid is a pain
smouker said:
Just an information, I found a working zip file for Viper4Android.
In this youtube video its explained:
https://www.youtube.com/watch?v=ltbJryJT1gg&feature=youtu.be
Its only a flash of the zip file without any additional modules like AML and stuff. For me this works
Click to expand...
Click to collapse
This didn't worked for me.. still error that I cannot install the drivers
paper88 said:
This didn't worked for me.. still error that I cannot install the drivers
Click to expand...
Click to collapse
I also have this issue. I used the link from the youtube video. I'm unable to get it to install drivers even after granting Viper4Android root access. Always get a "installations failed at patching system"
paper88 said:
This didn't worked for me.. still error that I cannot install the drivers
Click to expand...
Click to collapse
JWhetstone02 said:
I also have this issue. I used the link from the youtube video. I'm unable to get it to install drivers even after granting Viper4Android root access. Always get a "installations failed at patching system"
Click to expand...
Click to collapse
If you go to the v4a thread on here and download the latest Viper4Android apk from xda labs, it will work. They made it compatible with Android 11 now. Should be version 2.7.2.1
Install the apk, open it and follow instructions. After you grant it root access it will create a magisk module, install the driver and reboot your phone.
All has been working fine for me and I do not have any other sounds modules installed.
- Fullscreen/Immersive Gestures - a must have if you use built-in gestures
- Viper
- Systemless Host for AdAway
Sent from my OnePlus8T using XDA Labs
sharkie405 said:
- Fullscreen/Immersive Gestures - a must have if you use built-in gestures
- Viper
- Systemless Host for AdAway
Sent from my OnePlus8T using XDA Labs
Click to expand...
Click to collapse
I think that gesture module is obsolete on our device, there is an option to hide the bar in system as it is.
fxz said:
I think that gesture module is obsolete on our device, there is an option to hide the bar in system as it is.
Click to expand...
Click to collapse
Yes, but hiding the bar using that setting breaks swiping the bottom to go to previous app. This module hides the bar while keeping that functionality in tact.
Sent from my OnePlus8T using XDA Labs
They updated V4A on magisk. It works on Android 11 now.
Sent from my KB2005 using Tapatalk
Anyone tested Dolby module? If it's better than the pre installed version. Not rooted myself yet and would if I could
smouker said:
Well then we are sitting in the same boat
Living without Viper4Andorid is a pain
Click to expand...
Click to collapse
What makes V4A so good?
Wilazn said:
They updated V4A on magisk. It works on Android 11 now.
Sent from my KB2005 using Tapatalk
Click to expand...
Click to collapse
V4A works now, but you cannot select profiles such as bluetooth, speakers, etc. In addition, not all functions can be selected.
Super-Veloce said:
What makes V4A so good?
Click to expand...
Click to collapse
V4A is so popular because it allows you to create individual profiles in which you can set not only more bass or treble, but also a lot more parameters in the sound / equalizer settings.
You just have to test it for yourself and find out. For example, I found out a function that produces such a clean bass for my car, without V4A I would never have found that my speakers in the car can do so much without sounding bad. In addition, you can e.g. for Bluetooth increase the master sound (in dB).
Yea I noticed after I posted. I copied all my presets from my previous phone and nothing shows up. Sucks there's no profiles for speaker, headset, Bluetooth, etc. Hope the fix comes soon.
Sent from my KB2005 using Tapatalk
any module for automatic call recording?
Ramme said:
V4A works now, but you cannot select profiles such as bluetooth, speakers, etc. In addition, not all functions can be selected.
V4A is so popular because it allows you to create individual profiles in which you can set not only more bass or treble, but also a lot more parameters in the sound / equalizer settings.
You just have to test it for yourself and find out. For example, I found out a function that produces such a clean bass for my car, without V4A I would never have found that my speakers in the car can do so much without sounding bad. In addition, you can e.g. for Bluetooth increase the master sound (in dB).
Click to expand...
Click to collapse
How to activate V4A? I installed and activated the module but there's no difference with or without equalizer on phone speakers. V4A shows the same as your screenshots.
Did any of you get adaway working? Chrome beta is still showing ads ?
Layze said:
Did any of you get adaway working? Chrome beta is still showing ads [emoji19]
Click to expand...
Click to collapse
I don't think adaway completely removes the Google ads? I have the shopping ads but when I click them they refuse connection.
Ads on other sites though are removed for me. And ads on games are completely blocked.
Sent from my KB2005 using Tapatalk