Hey guys. After some searching, I found a few Custom Roms for the Huawei Y5 CUN-L21. But they have some problems:
LTE does not work.
No sim cards reads.
Maybe there are some people who might like to modify the Custom Roms like that.
The Links:
Resurrecion Lollipop 5.1.1 Huawei
https://www.mediafire.com/file/a717...llipop+5.1.1+Huawei+Y5+II+CUN-L23+CUN-L21.zip
AOSP OFICIAL 7.1 HUAWI Y5 II CUN-L21 Y CUN-L23 zip
https://mega.nz/#!S6hGSQKb!mcKZWn76E59zRibvV5-hH2l7BB0qqv7x3Ml5aSxAfCE
LineageOS 14.1
https://drive.google.com/file/d/1GeEJpOSBPLt7StTXpihKQK03n7qdwFeL/view
AOSP Extended
https://drive.google.com/file/d/1MLueLjjpiLyGyGQ_ob2tA8zSWyQSWXPU/view?usp=sharing
They are all test builds. Maybe we get it out in the community, from the alpha phase into a stable phase without mistakes get. I hope you can start something here.
I have already tested the Roms and they work on the Huawei CUN-L21.
But as said they have a lot of bugs and mistakes.
Regards Jack241287 :fingers-crossed:
Jack241287 said:
Hey guys. After some searching, I found a few Custom Roms for the Huawei Y5 CUN-L21. But they have some problems:
LTE does not work.
No sim cards reads.
Maybe there are some people who might like to modify the Custom Roms like that.
The Links:
Resurrecion Lollipop 5.1.1 Huawei
https://www.mediafire.com/file/a717...llipop+5.1.1+Huawei+Y5+II+CUN-L23+CUN-L21.zip
AOSP OFICIAL 7.1 HUAWI Y5 II CUN-L21 Y CUN-L23 zip
https://mega.nz/#!S6hGSQKb!mcKZWn76E59zRibvV5-hH2l7BB0qqv7x3Ml5aSxAfCE
LineageOS 14.1
https://drive.google.com/file/d/1GeEJpOSBPLt7StTXpihKQK03n7qdwFeL/view
AOSP Extended
https://drive.google.com/drive/folders/1C5GwSYxbJOWjYXaWGPs0ZgsTvWSYoEf9
They are all test builds. Maybe we get it out in the community, from the alpha phase into a stable phase without mistakes get. I hope you can start something here.
I have already tested the Roms and they work on the Huawei CUN-L21.
But as said they have a lot of bugs and mistakes.
Regards Jack241287 :fingers-crossed:
Click to expand...
Click to collapse
Update: I think this is the Source Code from the Custom Roms. Link--> https://github.com/olegsvs/android_device_archos_persimmon_3_10_65
Jack241287 said:
Update: I think this is the Source Code from the Custom Roms. Link--> https://github.com/olegsvs/android_device_archos_persimmon_3_10_65
Click to expand...
Click to collapse
Update: Hey, guys here is one of the new Huawei Y5 II LTE Custom Roms for the Model CUN-L21.
Lineage Business OS 14.1 Unofficial
Link: https://drive.google.com/file/d/16zk9lkVGuTZcgeCEponLdAWF0jXYVNXf/view?usp=sharing
Port by: LinosX
Build date: Sat May 19 18:49:39 UTC 2018
Port date: 19.05.2018
Device: Huawei y5 ll LTE CUN-L21C577B115
included:
Anti-virus Kaspersky Internet Security Business Calendar Clean Master Lite
congstar
Ebay
Facebook
Facebook Messenger
Firewall without Root
Offline Maps
Noticeblock
NTV News
Polaris Office
Spotify
Twitter
Viber
WeatherOnline
WhatsApp
Messenger
Yalp App Store
Yandex Browser
Youtube
FDroid App Store
Just try it Lineage Business OS 14.1 Unofficial and has been put together completely new.
Known issues, I can not say because this project is still in the
Test phase is.
I wish you a lot of fun flashing with the custom. Greetings Jack241287
Hey guys.
I still have a working Lineageos 14.1 Unofficial Rom.
Link: https://drive.google.com/file/d/1JyBsDi5zKnqzqIt4tHEAldhMFpT_VOz0/view
The only mistake of Rom is the camera.
If you want to go back to the original firmware. Here is a little guide.
First, download your firmware at https://easy-firmware.com/home/browse/category/id/16573/.
Then you extract the UPDATE.APP from this archive.
Next, load the splitupdater from here: https://github.com/marcominetti/split_updata.pl.
Moves the folder split under Downloads and copies the UPDATE.APP into it.
Then open the terminal and enter the following.
1. cd downloads
2. ls
3. cd split
4. # copy splitupdate, crc and UPDATE.APP files
5. chmod + x splitupdate
6. chmod + x crc
7. ./splitupdate UPDATE.APP
Now you boot your Huawei in the fast boot mode first connect the USB cable and at the same time hold down the volume down button until the Fastboot mode appears.
Then you just need to install the files BOOT.img, RECOVERY.img and SYSTEM.img via the terminal with the following command. The 3 files can be found in the split output folder.
1. fastboot devices
2. fastboot flash boot BOOT.IMG
3. fastboot flash recovery RECOVERY.img
4.fastboot flash system SYSTEM.img
5.fastboot reboot
Now you have a fresh clean install again.
I hope that the guide will help you with missteps of Custom Roms that are listed here.
Greetings Jack241287
Did you test LineageOS? Will be stable on CUN-L21 ?
I have tested lineageos and this get someone good.
But i don't now,if comes the stable rom. Now the best is the lineageos 14.1 unofficial rom,but the mistake is the camera, she have a red light effekt,if you take a photo.:fingers-crossed:
The rom goes good on the cun-l21.
i have custom rom but bug in camera, now i will test each rom i have y5ii cun l21 LTE device.☺☺
the rom ported by linosX is so much buggy. bug in camera no front camera, camera freezes in video recording erroring camera died. no file manager, if we open file received from bluethooth says bluethooth stopped. offline max has stopped. back camera works but it is fully red exposer. full photo shows unclear with red light effect. i tested roms but only found major bug in camera.???
I have see the bug in the camera , thats a big problem. Maybe you can recompiling the rom with a other source app from github. I mean a camera fix.
it would be awesome if someone can fix it. i tried total of 4 roms but only camera fails.??
---------- Post added at 07:28 AM ---------- Previous post was at 07:24 AM ----------
fm radio also fails.??
please help, after installing OpenGapps on lineageOS 14.1, when i try to sign it to my google account the phone tells me "couldn't sign in, there was a problem communicating with google servers. Try again later."
Does any one have a solution to this? thanks
I have some problems
In both Lineage versions my mobile data doesn't work, RR doesn't read SIM cards and camera in AOSP Extended doesn't work. Maybe I will try the regular AOSP. Some apps like phone don't work. Does anyone know how to fix that kind of things? Especially the mobile data bug because it's really inconvenient.
I can't do this you can recompile for me please.
IMEI Broken
How to fix IMEI in here?
can someone link the twrp that works with the software version b115 because all links in all sites are actually down and i'm unable to install twrp and so flash the rom
Hi! I am currently working on a Stock EMUI 3.1 ROM and I am trying to reduce waste in it, as we all know that this phone doesn't have enough memory. I also included an EMUI 5.0 theme which looks awesome in my opinion. I'm trying to include SU in it aswell. If you would like to help me, feel free to PM me! If the rom is ready i will post a link to this thread!
Huawei Y5 II CUN-L21 EMUI LITE ROM
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello! I finished and tested the rom on my CUN-L21 and it works very well.
So everything works on this Rom so no Working/not working thing required here!
Also you need an unlocked bootloader and twrp or cwm recovery to flash this rom.
Here's what i changed:
Code:
/*
*Added EMUI 5.0 theme
*Added EMUI 5.0 Sounds
*Changed the build number
*Debloated
*Added EMUI 5.0 Bootsound
*/
List of apps I removed:
Code:
/*
*Huawei Swype
*Live wallpapers
*Gmail
*Maps
*Some other google stuff
*Huawei Vmall
*MORE HUAWEI BLOAT
*/
DOWNLOAD
https://drive.google.com/open?id=1u866psGjdwAsR9VAUNcKxAD0fkI43Sfh
I also have a yt video of the ROM:
https://www.youtube.com/watch?v=-6DiCTrZpwQ
camera problem
please fix the camera problem in lineage os 14.1.
---------- Post added at 08:20 AM ---------- Previous post was at 07:56 AM ----------
Are you still using this rom ?
Sounds very interesting but could you tell how much storage space you get after flashing your ROM. Thanks
Related
Code:
- Your warrenty is now void.
- You have been warned.
- Use at your own risk.
MoKee OpenSource is based on the Google AOSP. We update our source code frequently to keep up with the latest development, and not forgetting to merge in special features of our own at the same time.
A small group of people from around the world who are interested in Android launched this project on the 12th of December 2012, and is committed to make this ROM better and better. Like most contributors of open source projects (Omni, CyanogenMod, Slim AOSPA etc), we are doing all these in our free time as our passion…
Since this project is open source, anyone interested can participate in the development (maintain new devices, contribute code etc). Newcomers are always welcomed!
Bugs:
You tell me~
Credits:
Google, Qualcomm, Motorola, Samsung, Lge, TI, Nvidia, Intel, Sony,
CyanogenMod, Omnirom, Slim Roms, Koush for open-sourced SuperUser
all klte and kccat6 manitainer and sktjdgns1189
Source:
device tree:
https://github.com/18712886438/android_device_samsung_lentislte
https://github.com/18712886438/android_device_samsung_lentislte-common
kernel:
https://github.com/18712886438/android_kernel_samsung_apq8084
XDAevDB Information
Mokee for S 5 LTE-A, ROM for the Samsung Galaxy S 5 LTE-A
Contributors
CallMESuper
ROM OS Version: 7.1.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: MM Bootloader
Based On: AOSP,CyanogenMod
Version Information
Status: beta
Created 2017-01-13
Last Updated 2017-01-13
link here
https://mega.nz/#!rENU1LYT!5PmPqZt2jdd7tBHLy2iBtopVcRzMlCMuK7JhzEvxH88
make sure you have flash stock 6.0 rom or other stock-based rom
not just flash base mokee night 6.0
thx
Ohh..i'm in lollipop.ok i will update firmware to marshmallow and try to flash this rom.can you make custom kernel like jesse kernel in mm rom bro?
We need it for g901f too
Vicky_666 said:
Ohh..i'm in lollipop.ok i will update firmware to marshmallow and try to flash this rom.can you make custom kernel like jesse kernel in mm rom bro?
Click to expand...
Click to collapse
whick kind of kernel ? I mean why donnot u have a flash mokee 7.1 and install kernel adiutor? I think you will find something diffrent .
---------- Post added at 03:54 AM ---------- Previous post was at 03:53 AM ----------
XCMDOS said:
We need it for g901f too
Click to expand...
Click to collapse
I will do it after making sure g906 is almost perfect
This is great! Thanks! looking forward for other coming updates
he's come back ! thanks you
bug: MTP device not work
Thanks you
Quite smooth, MTP bugs and screen rotation bugs. The rotation doesn't always work and it gets fixed into place. Ex) Some how made my screen horizontal but it keeps being horizontal for a long time.
And normal Mokee lags are here but many custom roms have it so... I didn't test bluetooth yet. Someone would have already found out if it had bugs.
Edit: The fingerprint doesn't work
Nice ROM.
LoveLoli said:
Edit: The fingerprint doesn't work
Click to expand...
Click to collapse
fingerprint work fine me . g906s
Looking for good aosp rom
kotobodj said:
fingerprint work fine me . g906s
Click to expand...
Click to collapse
Mine's g906k and does it work for you normally in the settings? It keeps saying that the fingerprint is not set.
Hello. Thank you for bringing this rom to us. I am sure many will appreciate your hard work and persistence that it took to create this work. As it is in beta I have few things that I would like to report:
1) in my case fingerprint sensor is not working as well
2) the phone heats up at normal usage (no internet browsing) and eats up quite a lot of battery
3) wakelocks are present and there seems to be quite a lot of them at the moment. (much worst than stock mm 6.0)
On the flipside I am trying to adjust kernel settings, there are quite few due to it being custom. Any suggestions? At the moment everything seems to be working quite well. Time will tell.
baseband g906sksu1cpf1
LoveLoli said:
Mine's g906k and does it work for you normally in the settings? It keeps saying that the fingerprint is not set.
Click to expand...
Click to collapse
My device G906K and working fine
Thank you ! :good::good::good::good::good:
Thanks for this! The only custom ROM I use for my G906K is Mokee. How is the camera? MK60.1 has the camera flash bug.
Just to give all of you guys a feedback on my findings after playing with the rom. Please do the clean install, I have noticed that installing on top of the old OS will cause Mokee to overheat and give plenty of wakelocks. Do the full system wipe. Lesson learnt here. Somebody asked about the camera.. it works fine, nice and snappy.
After reinstalling as a clean rom, the phone does not heat up, I have not noticed any wakelocks and everything is silky smooth. Just waiting for the Xposed framework to be compiled.
All the best.
rafaleon said:
Just to give all of you guys a feedback on my findings after playing with the rom. Please do the clean install, I have noticed that installing on top of the old OS will cause Mokee to overheat and give plenty of wakelocks. Do the full system wipe. Lesson learnt here. Somebody asked about the camera.. it works fine, nice and snappy.
After reinstalling as a clean rom, the phone does not heat up, I have not noticed any wakelocks and everything is silky smooth. Just waiting for the Xposed framework to be compiled.
All the best.
Click to expand...
Click to collapse
Hey my friend,I have been struggling on the issue that I couldn't install the rom and splash screen loop. I have used different recoveries with newest base. Still,it doesn't work. Any solution please?
Hey, what helped me was to get:
1) latest MM firmware for your phone.
2) Flash it through ODIN. That will remove recovery, so you need to install the one corresponding to MM for your phone.
3) once that is done, you have required MM baseband.
4) put mokee on your SD card.
5) go to recovery, full wipe, format etc.
6) flash mokee
7) wait until its done.
rafaleon said:
Hey, what helped me was to get:
1) latest MM firmware for your phone.
2) Flash it through ODIN. That will remove recovery, so you need to install the one corresponding to MM for your phone.
3) once that is done, you have required MM baseband.
4) put mokee on your SD card.
5) go to recovery, full wipe, format etc.
6) flash mokee
7) wait until its done.
Click to expand...
Click to collapse
yeah thx for ur information. Is that the reason why i cannot flash because of my baseband is the latest one?I flashed G906KKTU1CPL1 for G906K which was released on 3/1/17.
For those who successfully flashed the rom. May you tell me which recovery and base you used?
Thank you so much~~~
CyanogenMod 13 is a free, community built distribution of Android 6.0.1 (Marshmallow) which greatly extends the capabilities of your phone.
These are unofficial Beta builds of CM13 for the Oppo f1f.
To hear about the latest updates and changes to CyanogenMod as a whole, you can follow +CyanogenMod on Google+!
My change log is in post #2.
Code:
#include <stddisclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What doesn't work yet
- You tell me
Installation Instructions
You must be on 010 ColorOs firmware to use this rom. If you are on a newer version of ColorOs and hvae problems with things like wifi you can flash the firmware from that version with the zip file in the optional extas post (post#3)
1. You must unlock your bootloader using magictricks.zip supplied by @uberlaggydarwin.
2. You must have a custom recovery installed that allows SELinux. Get TWRP build for Oppo f1f from here.
3. Download the current Oppo f1f build from here.
4. Get Gapps from here.
5. Download the latest kernel update from here.
6. Fully wipe your device from TWRP Recovery. eg WIPE > SWIPE to Factory Reset.
7. Install Rom , Gapps and kernel update from TWRP Recovery then Wipe dalvic and cache then Reboot.
Credits
- @uberlaggydarwin Without all his work this would never be possible. So please thank him. The bootloader unlock and original kernel for this is all his work.
- CyanogenMod Team.
If I have missed anyone please let me know and I will happily add to the credits.
XDA:DevDB Information
CM13 for Oppo f1f, ROM for the Oppo F1
Contributors
MiniBlu, uberlaggydarwin
Source Code: https://github.com/MiniBlu
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: magictricks bootloader, twrp recovery, ColorOS V2.1.0i - F1fEX_11_160507 firmware
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: Beta1
Beta Release Date: 2017-01-16
Created 2017-01-22
Last Updated 2017-02-21
Change Log
- 21 Feb 2017 - Updated kernel Release (Based on latest CM re-based kernel source)
- Battery battery life and performance
- Improved audio
Optional Extras
- Updated Kernel for the 16 Jam 2017 release. Here is and updated kernel that you can flash on top of the 16 Jam 2017 release. Just flash it from TWRP then wipe dalvic and cache and reboot (make sure your phone is fully charged first as re-optimizing all you apps will take a lot of battery).
- ColorOs 010 firmware can be flashed with this zip.
Does on screen and off screen gestures work? Screenshots plz
AnantNigam said:
Does on screen and off screen gestures work? Screenshots plz
Click to expand...
Click to collapse
Screen off yes screen on no. I might do some screenshots at some stage but its just stock cm13, they all look the same. Its only a beta testing version, still a lot of real work to do on it before I worry about things like that.
Thank you! So this is the problem that I've had when I use the rom:
- Sometimes I cannot unlock the lock screen settings to reset the new screen lock.
- The Camera app sometimes will crash when I try to record.
- The battern drain is quite fast. (as you mentioned)
Other than these, I think the rom is really great.. :good:
Do we have to install old firmware to make wifi work?
AnantNigam said:
Do we have to install old firmware to make wifi work?
Click to expand...
Click to collapse
If you have the latest update, then yes. Just flash the color is ROM mentioned in the requirements section of the op first. I'll add a smaller firmware only zip to the op tomorrow.
Hey
Nice to see development taking place for our oppo f1. Thnx fr ur hard work
I just wanted to know if VOLTE working?
Thank you
Nice ROM , Thanks!
I found some problems :
-Camera
Crash when I switch from front camera to back camera and vice versa , crash too when I switch from photo mode to video mode and vice versa.
-Battery
Battery drains fast , and the charging time is becoming fast too
sorry for my bad english
Thanks so much you two for giving this's phone hope.
I was having the same problem with battery life. Maybe 2 hours from 100-0 then miniblu suggested. Turn off all the settings in display and lights that would drain power. Yesterday I got 12 hours out of it with lite usage . The battery expected life in setting isn't correct so don't trust the expected time (it drains to 80% in like 30 min then the rest can last another 12 hr on lite usage).
-little bugs I've noticed- camera app was a bit buggy first time I opened it up. (Reboot fixes it)
-when u leave to camera app what was left on the screen is your wallpaper for 2 seconds.
I can use this phone no problems everyday. I would recommend to anyone. Just make turn of any unessasary settings in screen off and it's prefect. I found nothing else wrong with this rom.
Thanks so much for this Minblu and uberlaggydarwin
This seems like the best place to ask:
Optus in Australia released a network locked version of the Oppo f1f with some startup/shutdown branding for a reduced cost. They also disabled the second SIM slot that this phone has in other countries.
My question is, could the ability to use the second SIM slot be activated by using a custom ROM such as this one, or is it more likely that Optus have crippled or possibly even removed the actual components from the handset?
Thanks, and thank you for the development effort you're putting in to this. I look forward to trying it out over the weekend.
Audio crackling sound
Thank you very much for the effort and time that you put in making this rom possible.
I have a question.. is anybody else experiencing audio problems when using headphones or earphones? There's like a crackling sound while I'm listening to music.
Yeah. Go into audiofx and turn down the bass or vitualizer until it doesn't make that noise anymore?
Jamie_oppo said:
Yeah. Go into audiofx and turn down the bass or vitualizer until it doesn't make that noise anymore?
Click to expand...
Click to collapse
I've already tried it but it didn't work. There's still this annoying sound like static. I thought it was the phone so I reverted back to coloros but when I tried, the sound is back to normal so I'm guessing it must be a bug in the cm13 rom.
revesxxa said:
This seems like the best place to ask:
Optus in Australia released a network locked version of the Oppo f1f with some startup/shutdown branding for a reduced cost. They also disabled the second SIM slot that this phone has in other countries.
My question is, could the ability to use the second SIM slot be activated by using a custom ROM such as this one, or is it more likely that Optus have crippled or possibly even removed the actual components from the handset?
Thanks, and thank you for the development effort you're putting in to this. I look forward to trying it out over the weekend.
Click to expand...
Click to collapse
IIRC Oppo claimed that the Optus F1f had the second SIM hardware physically removed.
MiniBlu said:
reserved
Click to expand...
Click to collapse
One last question please does VoLTE works with this rom?
Problems
-Camera crash and maybe not connected
-CPU always run full load (very bad problem)
-battery drain (because cpu full load always)
-more heat (because of cpu too )
-screen backlight always on when i turn off charging
-often Battery not +℅ when i turn on charging
-in choose manual network menu not show 4g signal for select
-cpu hotplug not support in cpu tuner apps
And everything is fine :good::good::good:
This rom better than project spectrum because can boot in to twrp recovery
I hope you will fix all problems
And port rom to cm14-14.1 soon
-----------------
Sorry for my bad English
It so awesome!!!
I've been waiting for this on my f1 , a cyanogenmod 13..thank you so much MiniBlu and of couse @uberlaggydarwin the great developer...i will install it in this weekend..thanks a lot again!!!!:good:
tianly_199 said:
Thank you very much for the effort and time that you put in making this rom possible.
I have a question.. is anybody else experiencing audio problems when using headphones or earphones? There's like a crackling sound while I'm listening to music.
Click to expand...
Click to collapse
It's to do with the digital mixers distorting the sound as it boosts it. In system/etc/ there is a file called mixer_paths_mtp.xml, where you can edit volumes through the speakers and headphones. A quick fiddle around with RX values makes it slightly better, but it's still there.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Requirements:
Honor 9 Lite TWRP.
Unlocked Bootloader.
Working:
Audio.
Bluetooth.
Camera.
Display.
Graphics.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi.
Bugs:
TELL ME
I'm not responsible of your bootloop if you did not follow steps.
Installaion Guide:
Download latest build.
Reboot to TWRP and flash it like AEX.
Reboot, enjoy the rom.
Downloads:
17-12-2018:
lineage-16.0-20181217-UNOFFICIAL-hi6250.zip| 543.5 MB
initial build.
18/12/2018.
lineage-16.0-20181217-UNOFFICIAL-hi6250.zip
Upload same build on AndroidFileHost.
Add Telegram support group.
15/07/2019.
lineage-16.0-20190715-Haky86-prague.zip
Bring up iConnect from PRA-LX1C432B360 a component used for wearable devices.
Android 9.0.0 R44
Security Patches: July 2019
20/07/2019.
lineage-16.0-20190719-Haky86-prague.zip
Bring up iConnect from PRA-LX1C432B360 a component used for wearable devices.
Android 9.0.0 R44
Possible fix for BLE (please test and report) thanks to @hackintosh5
22/07/2020.
lineage-16.0-20200722-UNOFFICIAL-hi6250.zip
SPL: July 2020
Bugs: gapps and webview, report me if you get 'em work.
Gapps:
I recommend SimpleGapps.
Recommendation:
Once boot may got some warning messages about media, download this RECOVERY_RAMDISK.
Reboot to TWRP.
Flash it as Recovery Ramdisk and run factory reset and all those annoying errors will gone.
Kernel GPL:
I'm not violating any kind of license since my ROMs used the stock kernel come with Emui 8.x called kernel.img so all credits goes to Huawei.
Notes:
To fix distorting audio while playing media: open AudioFX and disable it.
Some features might result missed that's depend on LineageOS developments.
XDA:DevDB Information
LineageOS P8 Lite 2017, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, flex1911
Source Code: http://github.com/hak86
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 8.x
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2018-12-18
Beta Release Date: 2018-12-17
Created 2018-12-18
Last Updated 2018-12-17
** Reserved **
click on "screenshots" tab to see screens.
I can swear I cleaned thoroughly... does this ship with magisk?
Edit: the Magisk Manager app was installed when I flashed. I thought I wiped everything though.
Waited for this rom for a long time. Thanks
Great rom, thanks a lot btw great battery backup as well :laugh: :good: , just one issue.. Can't access google assistant
tejask2610 said:
Great rom, thanks a lot btw great battery backup as well :laugh: :good: , just one issue.. Can't access google assistant
Click to expand...
Click to collapse
Try give permissions in Settings > Apps.
Is Pie Controls (Swipe up etc) crashing one of the issues caused by Lineage? I read something about it days ago, but maybe it could be fixed now, are them working?
Nico2416 said:
Is Pie Controls (Swipe up etc) crashing one of the issues caused by Lineage? I read something about it days ago, but maybe it could be fixed now, are them working?
Click to expand...
Click to collapse
Mostly depend on their developments, isn't official even on my LePro3. we have to wait a bit.
haky 86 said:
Try give permissions in Settings > Apps.
Click to expand...
Click to collapse
Google application already has all the permissions.. Still the same issue..
haky 86 said:
Mostly depend on their developments, isn't official even on my LePro3. we have to wait a bit.
Click to expand...
Click to collapse
Definitely trying it out nonetheless as soon as I can. Thanks again for your work
tejask2610 said:
Google application already has all the permissions.. Still the same issue..
Click to expand...
Click to collapse
I'll checkout the issue in next build. or we should wait next releases of LineageOS since still in developments. ))
haky 86 said:
I'll checkout the issue in next build. or we should wait next releases of LineageOS since still in developments. ))
Click to expand...
Click to collapse
:good:
cookremier said:
Have tested LA16 out, but its way too "naked" for me in direct compare to AOSPE6.1 or any other rom
Also the homescreen was crashing in a neverending loop, so i had to restart the phone.
When it booted up, crashing started again at the homescreen.
I thoght of installing it again, but when i cannot even set the qr bar to show up more than 3 tiles per row, why should i do.
As a groundbase LA16 maybe good, but i need customizations and in that point, its really not my taste.
But thanks for building it, maybe i will test again sometime.
Click to expand...
Click to collapse
1-) this rom still in developments like RROS.
2-) try factory reset with stock recovery should work better
NICE. Just got started with installing roms on this device, and was looking for a Pie los build to try.
Will see if I can test this one out this week, and report any bugs if I can. :good:
excellent work for devices with hi6250
a problem the battery in stand mode is drained too much.
And another error is that when you connect the headphones and disconnect you run out of audio.
GhostMX said:
excellent work for devices with hi6250
a problem the battery in stand mode is drained too much.
And another error is that when you connect the headphones and disconnect you run out of audio.
Click to expand...
Click to collapse
I will fix them in next build
Idk if its an issue with my phone, but I see the screen blinking on low brightness
hi
i have a problem with Bluetooth it keeps crashing when i connect my miband to it
mahdi.h22 said:
hi
i have a problem with Bluetooth it keeps crashing when i connect my miband to it
Click to expand...
Click to collapse
it kinda fixed itself
can u recommend a magisk that i can flash?
:angel:
mahdi.h22 said:
it kinda fixed itself
can u recommend a magisk that i can flash?
:angel:
Click to expand...
Click to collapse
V18?
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 20 for our Samsung Galaxy S3 (I9305).
This is a alpha build, also from the LineageOS side, there are typical functions still missing, so don't install it if you want a completely stable and completed ROM and don't report my already listet bugs!
Attention:
Sometimes it needs another reboot to find the sim card.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
Random reboots
NFC
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
ROM direct link
I9305 ROM
ROM Mega
Spoiler: Changelog
26.01.2023
13.03.2023
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
I would recommend to use microG instead of BitGapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][13.x][I9305][ALPHA] LineageOS 20.0, ROM for the Samsung Galaxy S3 LTE
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 13.x T
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Version Information
Status: Alpha
Created 2022-11-08
Last Updated 2023-03-13
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
kerryking1 said:
Does the tmobile s3 need a different rom? I'm upgrading all my old phones I just found. You happen to be working on all the phones I have.
Click to expand...
Click to collapse
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
html6405 said:
I'm sorry to tell you that the T-Mobile S3 has a different chipset (Qualcomm Snapdragon S4 Plus MSM8960) so this is not compatible.
This device never reached a higher android version than 7, I would love to bring Android 13 to this device, but I don't own this model.
Click to expand...
Click to collapse
Are you in the US?
kerryking1 said:
Are you in the US?
Click to expand...
Click to collapse
No, I'm in Europe...
Would it be possible to port if I tested it?
kerryking1 said:
Would it be possible to port if I tested it?
Click to expand...
Click to collapse
Not really, this would slow down the process too much.
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
rattesack3 said:
Hi there. I stumbled over this thread? Are compiled versions of the Rom available? Just for testing a nonrooted device? Cheers
Click to expand...
Click to collapse
1.03 GB folder on MEGA
2 files
mega.nz
Thanks will give it a try soon! Everytime i thought there were device at eol, they last longer. Hopefully this isn' t true for the gt-i9305.
Can you give some instructions to build the Rom on my own?
Do you think I could just swap boards? The boards look the same.
rattesack3 said:
Can you give some instructions to build the Rom on my own?
Click to expand...
Click to collapse
Write me a PN and I will help you.
kerryking1 said:
Do you think I could just swap boards? The boards look the same.
Click to expand...
Click to collapse
I fear that the mainboard could not fit into the case, but idk, you could give it a try.
I asked a seller on ebay and they said it doesn't work.
Is porting to a different chipset like starting over on port?
kerryking1 said:
Is porting to a different chipset like starting over on port?
Click to expand...
Click to collapse
I would have to start from the last developement state.
But at first I would make the device tree's for A13 ready, fix the build (there could be many problems), make the kernel ready and so on...
There would be a lot of work todo.
Hello,
the volume of voice recordings (e.g. whatsapp or signal) has always been too low for me in Lineage OS. In order for my interlocutors to understand me properly, I always had to increase the volume by changing the mixer_paths.xml in /root/vendor/etc/. Here is the video:
Unfortunately this file does not exist in Lineage OS 20. Does anyone know how to increase the volume of voice recordings here?
I'm so grateful you have brought my N8000 and i9305 back to life!
My children are learning and playing on my N8000 tablet. I have donated for N8000.
I re-wiped and installed your latest on i9305
20.0-20221108-HTML6405-i9305.zip
MicroG
Disabled animations
Android UI is running fast!
I tested YouTube app. It works but drops some frames on 360p, and any higher quality levels it drops a lot of frames.
scrcpy working nicely (not used with YouTube of course)
I'm still testing etc. It looks like i9305 will be useful with your ROM
-------------
Regarding your 3.4 kernel for "S3" (probably i9300?)
@html6405
Downloads for : Samsung Galaxy S3 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Please excuse my ignorance about kernels on Samsung Android.
Kernel Q1. Can your 3.4 "S3" Kernel work on S3 LTE i9305?
No Q2: Would you be able to compile 3.4 kernel for i9305?
Yes Q2. If I install html6405_kernel_-e48ea6b54b22-m0-3.4.zip Must I also install boot_img_3.4.img
Yes Q3. In what order do I install the kernel zip and boot_img zip?
Update 26.01.2023:
Synced with latest LineageOS sources
Set swappiness back to 100
Fixed SamsungDoze
Update 13.03.2023:
Synced with LineageOS sources from February
Moved to faster ota server
Possible fix for gralloc crash
I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
if phone back screens when first (and sometimes in normal) boot this is normal i will try to fix it
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
i want to delete that reply
-
notnoelchannel said:
Nice work brother, as I see you are new in ROM developing.
Let me give you some advice:
- Use CM12.1 as a base ROM because 4.4.4 is getting discontinued (you can use mine, it has bugs but can use as a daily)
- Install Greenify, this'll save a lot of battery
- Install open-sourced apps as an alternatives for closed-source apps.
For example: Youtube's alternative is NewPipe/SkyTube Legacy
F-Droid is an alternative for Google Play
Also, I'm planning to make a custom kernel for the J1. Can you be a tester if I can ask you?
Click to expand...
Click to collapse
I can be a tester But idk if i do the rom on android 5 do I have to do a new thread
Mihot7Forever said:
I can be a tester
Click to expand...
Click to collapse
Thanks!
Mihot7Forever said:
But idk if i do the rom on android 5 do I have to do a new thread
Click to expand...
Click to collapse
No, just edit the thread's name to [ROM] [STABLE] [5.1.1] MRom 1.2 for J100H and release the android 5 build. That's it
notnoelchannel said:
Nah, you'll not have to do a new thread. Just rename the whole thing.
Are you new to this btw? Do you know how to edit threads?
Click to expand...
Click to collapse
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Mihot7Forever said:
Yea I'm green (I'm from Poland) (I'm grean= Jestem w tym zielony= I'm new at it) idk how in english it is. can you post a link to your rom?
Click to expand...
Click to collapse
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Thanks I'm getting back to work I will add those apps you mentioned chceck up in an hour it will be probabli soon
notnoelchannel said:
[ROM][STABLE][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy J1
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device. #include /* * Your warranty is now void. * * I...
forum.xda-developers.com
here you go
Click to expand...
Click to collapse
Can you help me? how do i set default wallpaper?
Mihot7Forever said:
Can you help me? how do i set default wallpaper?
Click to expand...
Click to collapse
You can't set default wallpaper unless you modify apk's which can lead to many errors
notnoelchannel said:
You can't set default wallpaper unless you modify apk's which can lead to many errors
Click to expand...
Click to collapse
Ok in the version 1.2 i modified apk cmwallpapers but the user MUST set this wallpaper manually
Now im testing the rom on my j100h
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Mihot7Forever said:
Changelog:
Upgraded to Lolipop (5.1.1) Thanks @notnoelchannel
added Greenify
added F-Droid
added NewPipe
also thanks to @notnoelchannel
Click to expand...
Click to collapse
By the way can you contact me on Discord?
notnoelchannel#8830
notnoelchannel said:
By the way can you contact me on Discord?
notnoelchannel#8830
Click to expand...
Click to collapse
the username is invalid mine: Mihot7#0068
Mihot7Forever said:
I'm not responsible for any demage that this rom did!
MRom v2.0
The goal of this rom is to put as much apps as posible (so you don't have to install gapps and... slow down your device)
(This rom will be developed only for older phones(becuse if you install gapps i will just lag as hell)
Special thanks to:
@notnoelchannel for main rom (5.1.1) https://github.com/NotNoelChannel/android_kernel_samsung_j13g/
old version Kostareka for the main rom! (https://forum.xda-developers.com/t/...nmod-11-microg-for-samsung-galaxy-j1.4284891/) (the rom is modification for cm 11 by Kostareka!)
CM developers
And google (for android)
Any apps dev who's app is in this rom!
Working and not
Working:
WiFi
RIL (Data, Calls, SMS)
GPS
MTP
ADB
Sensors (Screen rotating, etc)
Camera
Internal/External storage
Audio (playback, recording)
Tethering (WiFi, USB, see not working)
Voice Recording
Video (playback, recording)
Everything that's not listed in "Not working"
Not working:
FM radio (removed from the firmware, will implement it soon)
Bluetooth (tethering, connecting to devices, etc)
Offline Charging (boot your phone to twrp and charge (while connecting the cable) or grab an usb cable cut it in half and + to + and - to - on battery and cable )
(taken from @notnoelchannel post)
Kernel Source code
http://[URL]https://github.com/NotNoelChannel/android_kernel_samsung_j13g/[/URL]
Contributors
ROM OS Version: 5.1.1 Lolipop Funfact I was eating a lolipop while i was updating this rom to lolipop
ROM Kernel: idk
Version Information
Status: Stable
Created: 10.06.2023
Last Updated: 11.06.2023
Note:
Pls dont hate me for my english Im dumb and this is my 1st rom that i made myself! (2nd version of it (4.4.4->5.1.1)
Features:
Pou
Greenify
F-Droid
NewPipe
Root explorer (you must root)
custom wallpaper
more will come!
Wanna add apps?
contact me: on email [email protected]
via xda
or in this post in message add app name or apk file (Infected files will be reported!)
Note: old versions are still here
Click to expand...
Click to collapse
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Antiquillium said:
Way to go @Mihot7Forever ! ...
Here's something i'd like to share with anyone interested in running almost any J100H CM12.1 ROM on J110H j1pop3g... It's a workaround to make the ROM run on J110H, but for sure you'll find many bugs and lags.. It's a workaround for experimental purposes not for reliability or daily usage.
Get the J100H CM12.1 ROM you wish to run on J110H (like for instance version 2 up here ^^^ ), then add the contents of the zip file attached to the ROM and replace the ones inside... and use the attached boot image file when needed...
Special thanks to @smiley9000 and @notnoelchannel for their efforts, I just collected their work and zipped it in a file!
Click to expand...
Click to collapse
after i get back from school i will try
Mihot7Forever said:
after i get back from school i will try
Click to expand...
Click to collapse
I wish you luck!