Related
Hey guys
Is there any method working with the newest version of Pokemon GO to allow Oneplus One custom ROM users to play this game? The Internet is full of methods, I've already tried some but didn't work. Do you have any working idea for now?
Thanks in advance
Check your inbox.
But for all the other folks.
1. Install suhide http://forum.xda-developers.com/apps/supersu/suhide-t3450396 (via recovery)
2. Install root switch apk https://www.asus.com/zentalk/tw/for...wNDk1fGJmMjhjZGZifDE0NzY0MDUzNjB8MHwxNzM1NDI=
3. Start the root switch app and toggle the first switch off (this will "disable" your root).
4. Play the game
5. If your ready playing and you wanna use root again just toggle the switch back on in the root switch app.
Just search for magisk
Sent from my A0001 using XDA-Developers mobile app
massivekind said:
Check your inbox.
But for all the other folks.
1. Install suhide http://forum.xda-developers.com/apps/supersu/suhide-t3450396 (via recovery)
2. Install root switch apk https://www.asus.com/zentalk/tw/for...wNDk1fGJmMjhjZGZifDE0NzY0MDUzNjB8MHwxNzM1NDI=
3. Start the root switch app and toggle the first switch off (this will "disable" your root).
4. Play the game
5. If your ready playing and you wanna use root again just toggle the switch back on in the root switch app.
Click to expand...
Click to collapse
Do I need SuperSU installed? I like built in root in CM14.1
dasti555 said:
Do I need SuperSU installed? I like built in root in CM14.1
Click to expand...
Click to collapse
In the topic of suhide you can find the following
Requirements
- SuperSU v2.78 SR1 or newer (link)
- SuperSU installed in systemless mode
- Android 6.0 or newer
- TWRP (3.0.2 or newer, with access to /data - link!) or FlashFire (link)
So yes, you need supersu.
massivekind said:
In the topic of suhide you can find the following
Requirements
- SuperSU v2.78 SR1 or newer (link)
- SuperSU installed in systemless mode
- Android 6.0 or newer
- TWRP (3.0.2 or newer, with access to /data - link!) or FlashFire (link)
So yes, you need supersu.
Click to expand...
Click to collapse
- SuperSU installed in systemless mode
This mean normally flashed SuperSU.zip or I need to do something more?
Because I just flashed SuperSU SR4.zip and after that I wanted suhide0.55.zip and I can't "error 1 - check if you have atleast SR1 installed"
Can it be because of some kind of "november update"?
dasti555 said:
- SuperSU installed in systemless mode
This mean normally flashed SuperSU.zip or I need to do something more?
Because I just flashed SuperSU SR4.zip and after that I wanted suhide0.55.zip and I can't "error 1 - check if you have atleast SR1 installed"
Can it be because of some kind of "november update"?
Click to expand...
Click to collapse
You can just flash the zip
massivekind said:
You can just flash the zip
Click to expand...
Click to collapse
Too bad because I can't :/
This is now deprecated
See proper SuperSu root installation instruction by @hakaz here: https://forum.xda-developers.com/showpost.php?p=71588837&postcount=102
Install stock b378 boot image (L09) here first: https://mega.nz/#!v1RGRSzD!7Z9oKmvEbZHG9UGwxh-iCR_tEw2qjVJ2tHkb1mFSTLk
Splitting this out into separate thread for better visibility. Note that if you are already on L09 B378 root, no need to update -
What is this?
Root on Nougat for the Huawei P9. It's a boot image, pre-rooted with PHH's SuperUser. Requires an unlocked bootloader.
Downloads:
B378
L09: https://mega.nz/#!ekJVzLyY!pOhWHYpdhuRSFtBvxGYlMMFH5hFg0TG8bG17D13ZohM
L19: https://mega.nz/#!blgUnDpD!OAiHXwXvUfJ36OZeNBFbVkBeEocnNc-irHHo5CxMjrA
Installation:
Root install method 1 (no TWRP)
Reboot phone into bootloader mode
Download boot.img to PC and fastboot flash with: "fastboot flash boot rooted_b378_boot.img"
Reboot phone back into system
Install phh's SuperUser app from Play Store
Install JRummy's Busybox Installer and install to /vendor/xbin
Root install method 2 (with TWRP)
Download boot.img to phone (Internal Downloads or External SD)
Use OldDroid's TWRP: https://forum.xda-developers.com/p9/development/twrp-t3565703/post71244945#post71244945
Reboot into TWRP
Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
Flash and reboot phone back into system
Install phh's SuperUser app from Play Store
Install JRummy's Busybox Installer and install to /vendor/xbin
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
No responsibility if this doesn't work/breaks your device/eats your cat etc. - make sure you backup your data and have a backup boot/recovery image handy
XDA:DevDB Information
Pre-rooted boot.img for P9 Nougat, Kernel for the Huawei P9
Contributors
Atarii, PHH, LastStandingDroid, OldDroid, Dkionline
Version Information
Status: Stable
Stable Release Date: 2017-03-17
Beta Release Date: 2017-01-20
Created 2017-03-17
Last Updated 2017-03-17
Update (17/03/2017):
* Added L19 pre-rooted boot.img
This is not systemless root yes? No OTA support?
askor said:
This is not systemless root yes? No OTA support?
Click to expand...
Click to collapse
Yes this is Systemless, OTA should be fine - I've manually flashed OTA via dload but not tested normal OTA upgrade
will this root method have any drawbacks compared to the standard method( installing twrp and then flasing super su) am i going to be able to do the same things that im able to do with any rooted device? thanks in advice
ricardo99831390 said:
will this root method have any drawbacks compared to the standard method( installing twrp and then flasing super su) am i going to be able to do the same things that im able to do with any rooted device? thanks in advice
Click to expand...
Click to collapse
SuperSu does not currently work on the P9 with Nougat, partially due to lack of loop mount support in the kernel. Kernel sources are needed to rectify this, so I encourage people to email Huawei asking for their Nougat kernel patches.
PHH is not perfect (some apps don't work fully) but it's the best we have right now
Atarii said:
SuperSu does not currently work on the P9 with Nougat, partially due to lack of loop mount support in the kernel. Kernel sources are needed to rectify this, so I encourage people to email Huawei asking for their Nougat kernel patches.
PHH is not perfect (some apps don't work fully) but it's the best we have right now
Click to expand...
Click to collapse
ohh okay thanks for the info and also the work, i guess im waiting till the fully working method is out.
I've heard that they will relase the source near this month or the next when they finsh updating every p9
Is it possible to use this prerooted boot.img for l19 honor 8?
No. It's for P9, Honor 8 isn't P9, right?
Atarii said:
Splitting this out into separate thread for better visibility. Note that if you are already on L09 B378 root, no need to update
What is this?
Root on Nougat for the Huawei P9. It's a boot image, pre-rooted with PHH's SuperUser. Requires an unlocked bootloader.
Installation:
Root install method 2 (with TWRP)
Download boot.img to phone (Internal Downloads or External SD)
Use OldDroid's TWRP: https://forum.xda-developers.com/p9/development/twrp-t3565703/post71244945#post71244945
Reboot into TWRP
Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
Flash and reboot phone back into system
Install phh's SuperUser app from Play Store
Install JRummy's Busybox Installer and install to /vendor/xbin
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
Click to expand...
Click to collapse
Thank you for the guide, everything worked as described. I've got my P9 with c432 b378, rooted and TWRP installed.
By testing so far, RootChecker, AdAway (v3.2), Titanium and Reboot (to boot into TWRP or fastboot) all work fine with this phh's SuperUser
PS: It's possible to install Chainfire's SuperSU instead, and Viper4Android works too, see e.g.
https://forum.xda-developers.com/showpost.php?p=71761747&postcount=167
Hi all, is that ok to flash on my current P9 L09C432B383 ?
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
Thanks
twerg said:
Hi all, is that ok to flash on my current P9 L09C432B383 ?
The stock and pre-rooted boot.img states its form .378 but would it be ok on .383?
I dont know how to get root on it currently...
Thanks
Click to expand...
Click to collapse
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258
flash this, V3 is the version i would suggest.
How to ?
download this zip and save it to SD card
https://uploadocean.com/gccyygc0zbak
1. Unlock Bootloader
2. Flash TWRP via adb
3. Flash SuperSU via TWRP (Root is Must)
4. Open 'Terminal Emulator' in TWRP
5. type this command
' setenforce 0 ' , that will enable permissive mode
6. now flash the downloaded zip.
7. done. no need to wipe data or cache.
Driver are Preinstalled , so you wont get any driver installation issue.
Working perfectly on all honor phones with EMUI based on Android 7 or 7.1
Enjoy
Any way to revert back to the original sound profile ? Just asking.
Martobhai said:
Any way to revert back to the original sound profile ? Just asking.
Click to expand...
Click to collapse
Viper4arise does not replace your original sound mod. so if you uninstall Viper4arise, original sound mod will be there with you. otherways, you can take backup of your original mod using titanium backup, and flash it after Viper4arise is uninstalled.
Dr.Anshuman said:
Viper4arise does not replace your original sound mod. so if you uninstall Viper4arise, original sound mod will be there with you. otherways, you can take backup of your original mod using titanium backup, and flash it after Viper4arise is uninstalled.
Click to expand...
Click to collapse
Well i flashed it but i dont think the sound profile is any different XD . Tested it on the honor 7x. Any issues?
No difference? Did I miss anything?
Username.php said:
No difference? Did I miss anything?
Click to expand...
Click to collapse
Well it shows the same thing here too. Then changed FX compatible mode to Compatible .
SELinux mode Should be Permissive.
Username.php said:
No difference? Did I miss anything?
Click to expand...
Click to collapse
Martobhai said:
Well it shows the same thing here too. Then changed FX compatible mode to Compatible .
Click to expand...
Click to collapse
Did you check your SELinux mode?
Viper do not run if your SELinux mode is Enforcing.
set your SELinux mode to Permissive, Follow these instructions,
Open Terminal emulator in TWRP, Type--> Setenforce 0 , hit Enter , it will set SELinux mode to Permissive,
Now again FLASH Viper4arise zip file via TWRP.
Check again driver status of viper4arise.
Let me know if it works for you. thank you.
Can we use magisk for viper?
maximran said:
Can we use magisk for viper?
Click to expand...
Click to collapse
hello max, i think all vipers are same.
if Magisk viper working good then go for it.
if any issue with installing viper drivers then try this zip. it have preinstalled drivers.
Dr.Anshuman said:
How to ?
download this zip and save it to SD card
https://uploadocean.com/gccyygc0zbak
1. Unlock Bootloader
2. Flash TWRP via adb
3. Flash SuperSU via TWRP (Root is Must)
4. Open 'Terminal Emulator' in TWRP
5. type this command
' setenforce 0 ' , that will enable permissive mode
6. now flash the downloaded zip.
7. done. no need to wipe data or cache.
Driver are Preinstalled , so you wont get any driver installation issue.
Working perfectly on all honor phones with EMUI based on Android 7 or 7.1
Enjoy
Click to expand...
Click to collapse
Does this work on Oreo?
Sujay95 said:
Does this work on Oreo?
Click to expand...
Click to collapse
No.
Oreo have Hardcoded Enforcing SELinux mode into Boot/Kernel, and V4A requires permissive mode.
we have to wait till any developer crack how to change SELinux mode to Permissive in Oreo.
This guide is for only Coolpad note 5 Nougat 7.0 [However you can try on MM too]
You must have root access and twrp before installing xposed framework
Note: Im not responsible if it damage/harm/brick your device. Install at your own risk
First take backup from twrp, so if you got into trouble you can restore your rom easily
----
Step 1) install xposed installer apk from here >> Click Here
Note: only install apk, but dont install framework from app
if it ask root permission then grant/allow it.
Step 2) Now you need to install framework using twrp
Download framework (nougat) zip>> Click Here
Download framework (mm) zip >> Click Here
Download xposed Uninstaller zip >> Click Here
^^i only tried nougat version, because i dont have mm. you can try if you have mm installed
Before flashing from twrp put your xposed uninstaller zip in your sdcard or internel storage, so you can remove xposed if you get bootloop
Step 3) Now flash xposed framework from twrp
- After flashing it will reboot & Wait for 20-30 minute
- Then you will see home screen
Enjoy
--> If your phone doesnt boot up after 30 minutes then you need to uninstall xposed using uninstaller zip
@Credit
- @rovo89
- TonyStark
Official Support thread>> https://forum.xda-developers.com/showthread.php?t=3034811
tcpcd said:
This guide is for only Coolpad note 5 Nougat 7.0 [However you can try on MM too]
You must have root access and twrp before installing xposed framework
Note: Im not responsible if it damage/harm/brick your device. Install at your own risk
First take backup from twrp, so if you got into trouble you can restore your rom easily
----
Step 1) install xposed installer apk from here >> Click Here
Note: only install apk, but dont install framework from app
if it ask root permission then grant/allow it.
Step 2) Now you need to install framework using twrp
Download framework (nougat) zip>> Click Here
Download framework (mm) zip >> Click Here
Download xposed Uninstaller zip >> Click Here
^^i only tried nougat version, because i dont have mm. you can try if you have mm installed
Before flashing from twrp put your xposed uninstaller zip in your sdcard or internel storage, so you can remove xposed if you get bootloop
Step 3) Now flash xposed framework from twrp
- After flashing it will reboot & Wait for 20-30 minute
- Then you will see home screen
Enjoy
--> If your phone doesnt boot up after 30 minutes then you need to uninstall xposed using uninstaller zip
@Credit
- @rovo89
- TonyStark
Official Support thread>> https://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
Can you tell me which theme module is working...gravity box is working or not?
[email protected] said:
Can you tell me which theme module is working...gravity box is working or not?
Click to expand...
Click to collapse
none of working
How to use multiscreen option in coolpad note 5 nougat
Make a custom ROM for Coolpad note 5. Please. Based on stock Android Oreo.
Oreo Root For The S7/S7E (Will work on Rev4-Rev10/A Bootloader) Adb Install
A big thanks goes out to @klabit87 he is 99 percent the reason we have root! Also @stang5litre and stang5litre test group.Prefered Root Method Oreo Only Using Odin Only For Rev-4 Too Rev10/A
Odin Install Root Method For S7 Flat Can Be Found Here
Odin Install Root Method For S7 Edge Can Be Found Here
Root Method Using Odin Only For Rev-11/B -- Please Read Limitations On The Thread
Rev11/B Root Method For S7 Flat Can Be Found Here
Rev11/B Root Method For S7 Edge Can Be Found Here
ADB Method Oreo Or Nougat For Rev-4 Too Rev10/A -- Must Use Adb Method For Nougat Root
2023_S7_Flat_Edge _ADB_Root_Plus_Safestrap_V1.7z
Directions:
This works for Oreo Rev4-Rev10/A Bootloader Roms or Nougat Rev4
As always there is a chance of bricking your phone
1. Download and extract 2022_S7_Edge_ADB_Root_Plus_Safestrap.7z
2. Reboot your phone to download mode
3. Inside the 2022_S7_Edge_ADB_Root_Plus_Safestrap.7z folder you will find an Odin_Firmware folder. Use Odin and flash the Eng Boot Image for your phone
4. Once phone is rebooted and connected to computer click on the cmd-here.exe and type Install_One_Click.cmd in the command window and hit enter
5. Once root is done and root bat closes your phone will reboot too stock recovery where you must wipe data
6. Once booted click on SuperSu app and update su binary if app ask then reboot
7. Don't flash any superuser zips in recovery that are not made by me or use any other SuperSu apk
Rebooting Too Safestrap Recovery
1. Reboot phone as you would too boot stock recovery Pwr + VolUp + Home. It takes up too 40 seconds too boot recovery. Ignore the mount system errors on info screen
2. Enter recovery.
3. Too leave just reboot system ignore no system installed message if you get it
4. There is screen lag issues on scrolling in recovery. There is aroma file manager that takes care of this issue while in recovery but selecting zips too install may present a problem for this you can use the kernel manager recovery flash option while phone is booted too system. Simply select zip too flash and phone will reboot too recovery and flash it and reboot back too system. Most other function in recovery should work the issue is just scrolling too select files.
5. Flashfire is installed as an alternative as well
Features:
1. SuperSu Root- Do not use any other SuperSu app. Its ok to update su binary if app ask.
2. Safetrap recovery-Still working out scrolling issue
3. Flashfire
4. Kernel tweaks CPU governor set too Conservative
5. Entropy/Swapiness set to High
6. Build Prop tweaks to combat lag
7. Bloat removed from rom
8. Knox removed from rom
Bugs:
Eng Boot Image causes lag
Safestrap Recovery has scrolling issues
Random Reboots will most likely happen
Safetynet will not pass
Battery life may not be optimal
SuperSu cannot be updated
Flashfire may need date changed too 2016 to function if it just keeps closing on you
Volte And Hotspot Fix
View attachment OREO_VOLTE_ICON_HOTSPOT_FIX.zip
Old Downloads
S7_Oreo_Nougat_Adb_Advanced_Root_V12.zip Recommended Root Zip
This zip gives you the option to install some cpu tweaks and will also. Install the entropy tweak that the SEFix app does. The tweak sets entropy to high by default I also include the SEFix app if you want to change the settings. I also set the swappiness settings to very high. If you want to change these settings you can download the speedup swap app from playstore. The above zip also removes knox and changes the fstab.qcom file to disable dm-verity on system files and remove all file encryption which makes it seem to work better and make it compatible with my no root roms that has to have this done to allow safestrap to work. Installing the above zip requires a data wipe unless you have already installed it or you are coming from my non rooted roms
S7_Oreo_Su_Binary_Only_ADB_Root.zip Alternative Root Zip
This root zip is only for oreo an only installs the su binary to the system/xbin folder giving you root privelages it has no tweaks and does not change the fstab.qcomn file to remove dm-verity and system file encryption. There is no SuperSU app installed either but you will have root privelages.
Credits:
- @Raymonf for modified odin
- @afaneh92 for safestrap
- @me2151 for help and finding alternative flash methods
- @tytydraco for some instructions
- @mweinbach for some instructions
- @Craz Basics for help
- @partcyborg for help and guides other devices root methods
- @elliwigy for being great help when I need it
- @stang5litre
- @jds3118
- @Krog18
If I missed you please pm me
Donations
If you would like to donate please send all donations to @klabit87 PayPal Link Here and give a thanks!
It's awesome to see yet ANOTHER post by you! You're doing great. Looking forward to future development
Nice, hopefully I will update to Oreo on e @stang5litre does a new rom for us. Once again thanks @klabit87 and you also
Sent from my SM-G935V using Tapatalk
I've selected "1 - Yes SafeStrap is Install" in :MENU5 phone reboted to SafeStrap how to exit? It is always rebooting to safestrap back.
Note: After I selected that menu console fast closed and I noticed some error.
abyss7 said:
I've selected "1 - Yes SafeStrap is Install" in :MENU5 phone reboted to SafeStrap how to exit? It is always rebooting to safestrap back.
Note: After I selected that menu console fast closed and I noticed some error.
Click to expand...
Click to collapse
Wow sorry about that I had script wrong. You cant really enter safestrap can you?
Edit:
redownload zip from OP its fixed. As far as you not being able to boot flash the BL enter_safetrap file then enter safestrap then mount system use file manage and delete e2fsck from system/bin folder then rename e2fsck.bin to e2fsck then reboot to download and Flash BL file in BL slot And the Eng boot loader in the AP slot
jrkruse said:
Wow sorry about that I had script wrong. You cant really enter safestrap can you?
Click to expand...
Click to collapse
On the contrary, I cannot exit from safestrap, it enters always after reboot. Sometimes screen contain small image of original loockscreen, it looks like split view.
Nice!! Is this the binary you wrote and how did you get the script to fire off??
abyss7 said:
On the contrary, I cannot exit from safestrap, it enters always after reboot. Sometimes screen contain small image of original loockscreen, it looks like split view.
Click to expand...
Click to collapse
follow my above directions
Craz Basics said:
Nice!! Is this the binary you wrote and how did you get the script to fire off??
Click to expand...
Click to collapse
@klabit87 found a way to hook in a script at boot so normal root works
jrkruse;77136767 [user=4168602 said:
@klabit87[/user] found a way to hook in a script at boot so normal root works
Click to expand...
Click to collapse
Normal root as in SuperSU?? And hats off to you @klabit87
abyss7 said:
On the contrary, I cannot exit from safestrap, it enters always after reboot. Sometimes screen contain small image of original loockscreen, it looks like split view.
Click to expand...
Click to collapse
jrkruse said:
Wow sorry about that I had script wrong. You cant really enter safestrap can you?
Edit:
redownload zip from OP its fixed. As far as you not being able to boot flash the BL enter_safetrap file then enter safestrap then mount system use file manage and delete e2fsck from system/bin folder then rename e2fsck.bin to e2fsck then reboot to download and Flash BL file in BL slot And the Eng boot loader in the AP slot
Click to expand...
Click to collapse
Follow these instructions
V2 zip is posted in OP that fixed the safestrap issue
Craz Basics said:
Normal root as in SuperSU?? And hats off to you @klabit87
Click to expand...
Click to collapse
Yes normal supersu
jrkruse said:
Yes normal supersu
Click to expand...
Click to collapse
I didn't think SuperSU supported Oreo?
@jrkruse, will it work with your CRF1 hybrid?
TheDevelopper said:
@jrkruse, will it work with your CRF1 hybrid?
Click to expand...
Click to collapse
Yes make sure you download V2 zip file from the OP
Craz Basics said:
I didn't think SuperSU supported Oreo?
Click to expand...
Click to collapse
It does 8.0 not 8.1
@jrkruse, there are two different Eng.boot for G935, which one should I choose? The 21.92MB or the 22.07MB?
Added a Volte Icon and Hotspot fix zip to OP
TheDevelopper said:
@jrkruse, there are two different Eng.boot for G935, which one should I choose? The 21.92MB or the 22.07MB?
Click to expand...
Click to collapse
Read what they say it tells you one is for OREO and one is for NOUGAT