Related
Hello everyone I am new here.
I have a problem. I need help. I accidently bricked the phone. Samsung galaxy s6 (smg920F) with wrong version of android. :crying:. I used odin3, i dont know how to see build number and version when the phone is bricked. Thank you in advance
dragonovak said:
Hello everyone I am new here.
I have a problem. I need help. I accidently bricked the phone. Samsung galaxy s6 (smg920F) with wrong version of android. :crying:. I used odin3, i dont know how to see build number and version when the phone is bricked. Thank you in advance
Click to expand...
Click to collapse
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that, put CSC code for your country in "Region", download it and then just flash it in Odin
Here you got full CSC codes list and also short guide how to use SamFirm
https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
How to root then? > CF-Auto-Root
How to get TWRP then? > latest TWRP
Customize? > Look my signature
rifek4 said:
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that. Then put CSC code for your country in "Region". Then just flash it in Odin
Here you got full CSC codes list:
Click to expand...
Click to collapse
thank you, it works as it should be :good: :victory:
dragonovak said:
thank you, it works as it should be :good: :victory:
Click to expand...
Click to collapse
No problem... I think that post will help in future to another no experienced users xD
I have another question. which program you recommend for rooting samsung galaxy s6
dragonovak said:
I have another question. which program you recommend for rooting samsung galaxy s6
Click to expand...
Click to collapse
Look my signature on what i'm. For you I prefer now flash CF_AutoRoot via Odin then latest TWRP also via Odin and follow my signature... For ROOT i'm using latest SuperSU SR3 in BINDSBIN mode with suhide for SafetyNet working and no problems with Synapse (look HERE for best settings).
Thak you , i root with odin3. I took root file from here (https://autoroot.chainfire.eu/ )now its done.
rifek4 said:
http://cdn.droidviews.com/wp-content/uploads/2015/03/Odin3_v3.12.7.zip Odin 3.12.7 (latest)
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647 SamFirm 0.3.6 (latest)
http://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download Samsung USB Drivers 1.5.63 (latest)
Install latest USB drivers, unpack lastest Odin3 and SamFirm. Use SamFirm to download latest firmware for your model, so put "SM-G920F" in "model" check "Auto" under that, put CSC code for your country in "Region", download it and then just flash it in Odin
Here you got full CSC codes list and also short guide how to use SamFirm
https://www.androidsage.com/2017/07...specific-product-code-csc-and-country-region/
How to root then? > CF-Auto-Root
How to get TWRP then? > latest TWRP
Customize? > Look my signature
Click to expand...
Click to collapse
odin seems not working for me it just do nothing. it just stop at setting up? any suggestion i came from ultimate nougat s8 port. and wanna flash stock firmware.
rifek4 said:
What doesn't working? How? What happenes...? You can give a little bit more information, im not Nostradamus. Normally it's working for everybody so...
Click to expand...
Click to collapse
i know the problem now... i was so f***** stupid reading every word in the instruction... forget to read the firmware iwas flashing... it was for my s4 i9505 firmware. thanks anyway forgive my stupidity.... hahaha
actually by mistake i installed j7 core firmware in j7 nxt and now when i am installing j7 nxt official firmware its not showing j7 nxt its still on j7 core ....i don't need j7 core kindly help i tried resetting device many times and wiped dalvik cache ..formatted partition
krrrrrish said:
actually by mistake i installed j7 core firmware in j7 nxt and now when i am installing j7 nxt official firmware its not showing j7 nxt its still on j7 core ....i don't need j7 core kindly help i tried resetting device many times and wiped dalvik cache ..formatted partition
Click to expand...
Click to collapse
Use Smart Switch On Your Pc Then Go to the Option Of Emergency Software Recovery
Visit This Site For Full Tutorial
https://www.sammobile.com/forum/showthread.php?t=29914
If Not Works Try To visit Service Centre...
Can you get into download mode?
If Yes? Then, Follow below instructions:
1. Download the latest samfirm tool available on xda.
2. Open the samfirm tool. Enter model and region.
3. Put a check mark on Auto and Binary Nature before Check Update.
4. Click on Check update. It will show the latest firmware available on samsung server.
5. Then click on download. It will download four file full firmware (BL,AP, CP, CSC, HOME_CSC).
6. Click on PIT tab and select the PIT file from firmware folder.
7. Connect your phone in download mode. Then flash (BL,AP, CP, CSC) with odin.
You need a strong internet connection to download the file.
All the best.
Core and nxt are same so doesnt matters
rajnikant574 said:
Can you get into download mode?
If Yes? Then, Follow below instructions:
1. Download the latest samfirm tool available on xda.
2. Open the samfirm tool. Enter model and region.
3. Put a check mark on Auto and Binary Nature before Check Update.
4. Click on Check update. It will show the latest firmware available on samsung server.
5. Then click on download. It will download four file full firmware (BL,AP, CP, CSC, HOME_CSC).
6. Click on PIT tab and select the PIT file from firmware folder.
7. Connect your phone in download mode. Then flash (BL,AP, CP, CSC) with odin.
You need a strong internet connection to download the file.
All the best.
Click to expand...
Click to collapse
Thanks i found the solution i was doing mistake by not selectiong BL,AP,CP,CSC
Oves786 said:
Core and nxt are same so doesnt matters
Click to expand...
Click to collapse
samsung core doesn't have VOLTE
IamRaghav said:
Use Smart Switch On Your Pc Then Go to the Option Of Emergency Software Recovery
Visit This Site For Full Tutorial
https://www.sammobile.com/forum/showthread.php?t=29914
If Not Works Try To visit Service Centre...
Click to expand...
Click to collapse
Thanks odin works well
Flash indian j701f firmware core or nxt indian firmware has voltw
New Odin version was leaked!
Odin 3.13.1
This version of Odin allows you to flash newer firmwares with compressed binaries (lz4).
How to flash G950FXXU1CRB7
Download G950FXXU1CRB7 firmware using SamFirm (Model: SM-G950F; Region: DBT; Auto; Check CRC32; Decrypt Automatically; then press "Check Update" and "Download")
Extract downloaded ZIP file
Open Odin and load corresponding package to each slot (BL, AP, CP, CSC)
Put your phone into Download Mode, connect it to the computer using USB cable and press "Start"
There is no need to repack the firmware anymore.
Attached files:
Odin3_v3.13.1.zip
SHA256: 5855ed03a02b03ffcf28ba691236dbffc2e429841f952e904048378dd1bec265
MD5: e52ec5982122f73449f63e8e2b2c9cda
Credits:
Thanks to @bazylek78 for sharing a link to 4pda.ru forum
kernel.killer said:
New Odin version was leaked!
Odin 3.13.1
This version of Odin allows you to flash newer firmwares with compressed binaries (lz4).
How to flash G950FXXU1CRB7
Download G950FXXU1CRB7 firmware using SamFirm (Model: SM-G950F; Region: DBT; Auto; Check CRC32; Decrypt Automatically; then press "Check Update" and "Download")
Extract downloaded ZIP file
Open Odin and load corresponding package to each slot (BL, AP, CP, CSC)
Put your phone into Download Mode, connect it to the computer using USB cable and press "Start"
There is no need to repack the firmware anymore.
Attached files:
Odin3_v3.13.1.zip
SHA256: 5855ed03a02b03ffcf28ba691236dbffc2e429841f952e904048378dd1bec265
MD5: e52ec5982122f73449f63e8e2b2c9cda
Credits:
Thanks to @bazylek78 for sharing a link to 4pda.ru forum
Click to expand...
Click to collapse
For s8 plus?
Sent from my SM-G955F using Tapatalk
thahim said:
For s8 plus?
Sent from my SM-G955F using Tapatalk
Click to expand...
Click to collapse
Sure, just change SM-G950F to SM-G955F in SamFirm.
Ive a Galaxy s8 plus unlocked exynos.
Im from Portugal. Ive to Change anything or that region works?
southgaia said:
Ive a Galaxy s8 plus unlocked exynos.
Im from Portugal. Ive to Change anything or that region works?
Click to expand...
Click to collapse
DBT region receives firmware with OXM multi-CSC, which also includes TPH CSC (Portugal), so there should not be any issues.
Flash
I loaded the .tar files into Odin.
Auto Reboot is checked.
F.Reset Time is checked.
Everything else is unchecked.
After my phone boots into download mode do i have to press anything on it or i just press start on Odin ?
The only phone that i have flashed was my Galaxy S in 2010 and i haven't done anything like this before.
If I do this, will I receive ota updates in the future?
Atomsk said:
If I do this, will I receive ota updates in the future?
Click to expand...
Click to collapse
yes you will.
Phones , Laptops software fix
I m from lebanon
My S8 SM-G950FD with CSC MID
Can i install oreo dbt region
Avoid data loss
kernel.killer said:
New Odin version was leaked!
Odin 3.13.1
This version of Odin allows you to flash newer firmwares with compressed binaries (lz4).
How to flash G950FXXU1CRB7
Download G950FXXU1CRB7 firmware using SamFirm (Model: SM-G950F; Region: DBT; Auto; Check CRC32; Decrypt Automatically; then press "Check Update" and "Download")
Extract downloaded ZIP file
Open Odin and load corresponding package to each slot (BL, AP, CP, CSC)
Put your phone into Download Mode, connect it to the computer using USB cable and press "Start"
There is no need to repack the firmware anymore.
Attached files:
Odin3_v3.13.1.zip
SHA256: 5855ed03a02b03ffcf28ba691236dbffc2e429841f952e904048378dd1bec265
MD5: e52ec5982122f73449f63e8e2b2c9cda
Credits:
Thanks to @bazylek78 for sharing a link to 4pda.ru forum
Click to expand...
Click to collapse
Is there a way to avoid data loss installing the firmware with odin?
Daelors said:
Is there a way to avoid data loss installing the firmware with odin?
Click to expand...
Click to collapse
Use HOME_CSC not CSC, however, if there would be any issue during the upgrade, the storage would show only 16GB and you would have to do a factory reset anyway. If you are going to try to do the upgrade, I strongly recommend backing up your data.
Charbel1979 said:
I m from lebanon
My S8 SM-G950FD with CSC MID
Can i install oreo dbt region
Click to expand...
Click to collapse
Yes, the firmware for any regions included within OXM multi-CSC is the same.
For variant G950FD i neeed to use this same firm, right?
EDIT: i did this method and works fine. But the baseband was not to be CRB7? My phone says baseband G950FXXU1CRAP and the compilation number said R16NW.GF50FXXU1CRB7. Does its good?
afranioneto said:
For variant G950FD i neeed to use this same firm, right?
EDIT: i did this method and works fine. But the baseband was not to be CRB7? My phone says baseband G950FXXU1CRAP and the compilation number said R16NW.GF50FXXU1CRB7. Does its good?
Click to expand...
Click to collapse
Yes, that's right. Samsung did not update modem firmware or CSC package. Only bootloader and AP (system) were updated.
I flashed Oreo CRB7 final build from Germany and everything is great. But notifications for viber doesnt work as supposed. When i snooze them for only 15 minutes they never appear again and even after 2 hours when i open viber app i have new messages for which i didnt get notification neither sound and stays like that. But when i restart phone everything becomes normal untill i snooze some notification again. I did clean install, clear cash twice and factory reset the phone before Oreo.
Followed the instructions from this site step by step (it was flashing with extracting .lz4 extensions). Help?
Odin (3.13.1)
I can't find the download link for Odin (3.13.1). Please help??
is it just me or the battery life is just better?
Wipe the phone after flashing?
Something goes away?
SM-G950FD Exynos Dual Sim (My phone)
skaveesh said:
I can't find the download link for Odin (3.13.1). Please help??
Click to expand...
Click to collapse
Download Odin 3.13.1: https://forum.xda-developers.com/attachment.php?attachmentid=4431597&d=1519662712
for clean flash, choose home_csc or csc?
I have a SM-G920F that is network unlocked (as far as I can tell...). I updated it to the latest stock firmware available at the time and since then I have had Lineage 14.1 installed which I regularly update (along with OpenGApps). The Baseband version is G920FXXU5ERA5 which I think was installed as part of the stock firmware?
I noticed a couple of days ago that there is a newer stock firmware which I think has a newer baseband - although I am a bit confused as to what the baseband actually is (modem firmware?). I think the latest for my S6 is G920FXXU6ERF5 from June 2018 although there seems to be firmware from September 2018 for the Vodafone varient?
Is it possible to install the latest Baseband independantly of the whole stock firmware? Is there a .zip available for this?
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XFA (it has the newest baseband firmware right now)
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press CP and select file which starts with CP from downloaded (from Samfirm) and extacted zip folder.
Other sections (AP, CSC, etc) should be empty.
When you set the CP file to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XFA (it has the newest baseband firmware right now)
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press CP and select file which starts with CP from downloaded (from Samfirm) and extacted zip folder.
Other sections (AP, CSC, etc) should be empty.
When you set the CP file to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
Click to expand...
Click to collapse
Thank you for the very detailed reply.
Will this break anything?
My device I think is region UK BTU so is there any difference in the baseband firmware for XFA region devices (South Africa I think?).
Obviously I don't want to break anything or trip anything that will cause something to stop working - i.e. SafetyNet
Thanks
Andy
ADB100 said:
Thank you for the very detailed reply.
Will this break anything?
My device I think is region UK BTU so is there any difference in the baseband firmware for XFA region devices (South Africa I think?).
Obviously I don't want to break anything or trip anything that will cause something to stop working - i.e. SafetyNet
Thanks
Andy
Click to expand...
Click to collapse
It's not gonna break anything.
The CSC difference doesn't affect the baseband :good:
forumber2 said:
It's not gonna break anything.
The CSC difference doesn't affect the baseband :good:
Click to expand...
Click to collapse
Thank you. I sucessfully updated the baseband firmware to G920FXXU6ERI1 yesterday using your instructions
ADB100 said:
Thank you. I sucessfully updated the baseband firmware to G920FXXU6ERI1 yesterday using your instructions
Click to expand...
Click to collapse
I have hotspot tethering problem with my s6 after flashing 17.1 los rom. Adviced to update baseband. Did you have any problem after update?
X2tandeta said:
I have hotspot tethering problem with my s6 after flashing 17.1 los rom. Adviced to update baseband. Did you have any problem after update?
Click to expand...
Click to collapse
By the way, my baseband version is as follows G920FXXU6ERL2
Previous android version: Android 11
Previous base-band version: A125USQU2BUG5
company: wireless cricket
In the context of flashing with the new firmware I used :
- Odin version: 3 v3.14
- Firmware used: Samfw.com_SM-A125U_USC_A125USQU2BUL1_fac_2
The error is related to the vbmeta check. Did you used a sock firmware or you have patched it with magisk? Btw i reccomend to use frija to download the firmware.
If i can suggest I would make this steps:
1) download latest firmware with frija
2) Flash the stock and see if it work
Otherwise if this not help:
1) download latest firmware with frija
2) patch the whole ap and not only boot.img with magisk
3) open odin and flash it using the patched ap on the ap slot
If nothing above works, I think you can try this... not sure it will work. Replace inside the ap the vbmeta.img with the attached one that have the disabled verified boot.
Oneplus# said:
The error is related to the vbmeta check. Did you used a sock firmware or you have patched it with magisk? Btw i reccomend to use frija to download the firmware.
If i can suggest I would make this steps:
1) download latest firmware with frija
2) Flash the stock and see if it work
Otherwise if this not help:
1) download latest firmware with frija
2) patch the whole ap and not only boot.img with magisk
3) open odin and flash it using the patched ap on the ap slot
If nothing above works, I think you can try this... not sure it will work. Replace inside the ap the vbmeta.img with the attached one that have the disabled verified boot.
Click to expand...
Click to collapse
Thanks for the reply.ok
1- The firmware is stock.
2- I didn't patch any of the files I got ( any recommended guide on how to proceed>?)
3- I' so new at this
But anyways, yesterday I kind of sorted out the stuck by adding BL file, and CSC file along the AP file to ODIN, the phone restarted ok but found out it hasn't been unlocked from the carrier yet, so I guess that by judging what u just said, there are few thing I need a guide to
- Flashing the stock
- Patching the AP file
Ps Frija opens up when executed, but it closes in less than 1 second. (Pc 's OS: win 10 enterprise 64 bits)
leonardo07746 said:
Thanks for the reply.ok
1- The firmware is stock.
2- I didn't patch any of the files I got ( any recommended guide on how to proceed>?)
3- I' so new at this
But anyways, yesterday I kind of sorted out the stuck by adding BL file, and CSC file along the AP file to ODIN, the phone restarted ok but found out it hasn't been unlocked from the carrier yet, so I guess that by judging what u just said, there are few thing I need a guide to
- Flashing the stock
- Patching the AP file
Ps Frija opens up when executed, but it closes in less than 1 second. (Pc 's OS: win 10 enterprise 64 bits)
Click to expand...
Click to collapse
When you flash with Odin you always need to use all the files provided on the stock firmware ap, bl, csc and cp. If u are upgrading you can use the home_csc instead of the csc file that will let you keep your data.
Are you sure you have installed the framework that Frija need?
For the ap patching, is only meant if you want root your phone, flashing the whole ap instead of the boot.img only will let you fix the vbmeta checks too.
Install the magisk app.
Open it and tap Install, it will ask for a file to patch, chose the ap file of the stock firmware you downloaded.
Final step, flash ap patched and the others (bl,csc,cp).
When you say unlocked by the carrier what do you mean? You have any sort of sim block? Or you only want remove your carrier apps and configs?
Oneplus# said:
When you flash with Odin you always need to use all the files provided on the stock firmware ap, bl, csc and cp. If u are upgrading you can use the home_csc instead of the csc file that will let you keep your data.
Are you sure you have installed the framework that Frija need?
For the ap patching, is only meant if you want root your phone, flashing the whole ap instead of the boot.img only will let you fix the vbmeta checks too.
Install the magisk app.
Open it and tap Install, it will ask for a file to patch, chose the ap file of the stock firmware you downloaded.
Final step, flash ap patched and the others (bl,csc,cp).
When you say unlocked by the carrier what do you mean? You have any sort of sim block? Or you only want remove your carrier apps and configs?
Click to expand...
Click to collapse
thanks for all that
- it s sim block
Oneplus# said:
When you flash with Odin you always need to use all the files provided on the stock firmware ap, bl, csc and cp. If u are upgrading you can use the home_csc instead of the csc file that will let you keep your data.
Are you sure you have installed the framework that Frija need?
For the ap patching, is only meant if you want root your phone, flashing the whole ap instead of the boot.img only will let you fix the vbmeta checks too.
Install the magisk app.
Open it and tap Install, it will ask for a file to patch, chose the ap file of the stock firmware you downloaded.
Final step, flash ap patched and the others (bl,csc,cp).
When you say unlocked by the carrier what do you mean? You have any sort of sim block? Or you only want remove your carrier apps and configs?
Click to expand...
Click to collapse
Mannn thanks!
I rooted my tab 5Se a long time ago and deleted the firmware files except the AP.
I got stuck on the same screen today when I re-locked my bootloader after a stock AP-only flash
Then I saw your reply here and got the rest of the files flashed and it worked and booted
And for those who are reading if you don't have a SIM on your tablet you don't need a CP that's why you won't find it in your firmware zip file
Cheerios