Hello dear forum members,
i have a Honor View 10 BKL-L09 on 8.0.0.140(C432).
I unlocked the bootloader by using the unlock code from Huawei/Honor, and then i flashed different custom roms (just the system.img, since it is a project treble device).
I have flashed no custom recovery and whatsoever. Just the system.img.
Luckily i dumped/saved the stock system.img before i flashed custom roms.
Now i am back on stock system.img, everything except AI-features and equalizer/Histen-sound effects is working fine.
Now all i want to do is get rid of the security alert screen on boot-up, "your device has been unlocked and can not be trusted..."
Is that possible? If so, is it possible to get the AI stuff and sound effects/equalizer working again?
Any helpful answer is much appreciated.
Thanks in advance and greetings from Germany
I found the solution myself by using the tool from this thread DD :
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Its for numerous devices, also for Honor View 10.
To relock the bootloader, the tool asks you to enter the original/official unlock code that i got from Huawei/Honor.
I did that and it worked fine.
Device got factory reset and does not show the warning screen anymore.
Though in fastboot mode it shows "relocked", but i dont care about that.
AI-features and equalizer/histen sound effects also working again.
My phone is bootloader unlocked , and rooted... I can use sound effects and AI... Why they were not working in your case?
theorlyowl said:
I found the solution myself by using the tool from this thread DD :
https://forum.xda-developers.com/android/software/tool-tool-one-driversunlocktwrpfactory-t3358711
Its for numerous devices, also for Honor View 10.
To relock the bootloader, the tool asks you to enter the original/official unlock code that i got from Huawei/Honor.
I did that and it worked fine.
Device got factory reset and does not show the warning screen anymore.
Though in fastboot mode it shows "relocked", but i dont care about that.
AI-features and equalizer/histen sound effects also working again.
Click to expand...
Click to collapse
What if you don't have the unlock code? I have lost it since it's only displayed in web page instead of sending it in a mail.
@theorlyowl Pls can you share the system image of you stock rom I was not mistakenly haven't backed up my stock. I'm even stuck to boot after relock. So please it will be helpful if you share your stock image.
Dload the full firmware. It will be full stock with locked bootloader (not relocked but locked).
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
Narasimha12 said:
What if you don't have the unlock code? I have lost it since it's only displayed in web page instead of sending it in a mail.
Click to expand...
Click to collapse
Get it again on website. Or dload the full firmware
close bootloader for warranty
hey Guys i bought a view10 a few months ago on ebay.
It was unlocked.
Now i have to send it to repair.
Im New at this. Has some One a step by step tutorial?
With links ?
Im on Android 8.0.0 bkl9c432
Pls help me
Hi guys
Does anyone know if it works for hv10 bkl09 on EMUI 9?
I want to relock but I fear briking my phone...
Thank you all
Envoyé de mon BKL-L09 en utilisant Tapatalk
Rob1hn said:
Hi guys
Does anyone know if it works for hv10 bkl09 on EMUI 9?
I want to relock but I fear briking my phone...
Thank you all
Envoyé de mon BKL-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
Try doing the dload once and see if it helps, if not, may be you can download the full firmware in erecovery and see if it fetches a package, install and done. If not let me know, i may try one more option which should work as well
shashank1320 said:
Try doing the dload once and see if it helps, if not, may be you can download the full firmware in erecovery and see if it fetches a package, install and done. If not let me know, i may try one more option which should work as well
Click to expand...
Click to collapse
Already install stock rom from erecovery but the bootloader is still unlock...
Thank you
Envoyé de mon BKL-L09 en utilisant Tapatalk
Related
I can't enter recovery (Your device is corrupt . It can't be trusted and may not work properly) .
Bootloader is locked .
What happens if you try to reboot to the OS?
Sent from my ONEPLUS A3003 using Tapatalk
Google vendor image download and the. Flash all???? Strange your bootloader is locked. Have you played with custom ROMs on this device ? I can't just presume u have.
Sent from my Pixel using Tapatalk
@usernome, this belongs in the Q&A section. Please report your own post to a moderator to ask them to move it by clicking the exclamation point in the triangle /!\ in the lower left corner of your first post in this thread.
Fed2x said:
What happens if you try to reboot to the OS?
Sent from my ONEPLUS A3003 using Tapatalk
Click to expand...
Click to collapse
That's how it came . I don't know what happened .
iamdarren said:
Google vendor image download and the. Flash all????
Sent from my Pixel using Tapatalk
Click to expand...
Click to collapse
I tried that . I get some errors . I will post the log later .
You said earlier it came like this? Did you buy this phone and then you turned it on and this happened? It's very important you explain as best as you can so I can help you properly.
The phone was simlocked . Someone unlocked it (he unlocked the bootloader and then unlocked it with a box) . The phone was then sold to a customer who said that he wanted to update OTA . Then the phone became bricked .
Sent from my HTC Desire 820 using Tapatalk
If you try to unlock the bootloader with fastboot flashing unlock does it work or do you get an error? If you can't unlock the bootloader and flash the full factory image, you will likely have to try to get it replaced by Google.
exad said:
If you try to unlock the bootloader with fastboot flashing unlock does it work or do you get an error? If you can't unlock the bootloader and flash the full factory image, you will likely have to try to get it replaced by Google.
Click to expand...
Click to collapse
I can't unlock the bootloader (OEM unlock is not activated) .
There is no possibility to flash it even if the bootloader is locked ?
usernome said:
I can't unlock the bootloader (OEM unlock is not activated) .
There is no possibility to flash it even if the bootloader is locked ?
Click to expand...
Click to collapse
No you cant flash it if the bootloader is unlocked.
TonikJDK said:
No you cant flash it if the bootloader is unlocked.
Click to expand...
Click to collapse
So , if I brick my phone by mistake , Google left me no possibility to repair it ?
usernome said:
So , if I brick my phone by mistake , Google left me no possibility to repair it ?
Click to expand...
Click to collapse
If you brick your phone with a locked bootloader it wasn't your fault. Nothing you can do to it, can't root it, can't mod it. Just like any other locked phone. If it dies, send it to them for warranty.
usernome said:
I can't unlock the bootloader (OEM unlock is not activated) .
There is no possibility to flash it even if the bootloader is locked ?
Click to expand...
Click to collapse
No, basically everything you described was a terrible idea and it makes zero sense to intentionally lock the bootloader of a phone you just finished hooking up to a black box to forcibly modify software.
Never lock the bootloader of a modified device, that is just a given.
---------- Post added at 04:47 PM ---------- Previous post was at 04:45 PM ----------
usernome said:
So , if I brick my phone by mistake , Google left me no possibility to repair it ?
Click to expand...
Click to collapse
They absolutely left you with the possibility to repair it.
Then you turned that possibility off and locked the bootloader...
scryan said:
No, basically everything you described was a terrible idea and it makes zero sense to intentionally lock the bootloader of a phone you just finished hooking up to a black box to forcibly modify software.
Never lock the bootloader of a modified device, that is just a given.
---------- Post added at 04:47 PM ---------- Previous post was at 04:45 PM ----------
They absolutely left you with the possibility to repair it.
Then you turned that possibility off and locked the bootloader...
Click to expand...
Click to collapse
If you lock your bootloader with custom firmware what happens exactly? I know unlocking wipes the device but I can't remember what happened the last time I had to lock my bootloader. I've read it doesn't wipe. I was doing things too quickly to remember for myself..
What do you mean sim locked?
seshaz said:
What do you mean sim locked?
Click to expand...
Click to collapse
holy sh*t I'm a scrub I thought unlocking your phones bootloader magically allowed you to switch networks.
mark7807 said:
holy sh*t I'm a scrub I thought unlocking your phones bootloader magically allowed you to switch networks.
Click to expand...
Click to collapse
Lmao
---------- Post added at 02:42 AM ---------- Previous post was at 02:41 AM ----------
seshaz said:
Lmao
Click to expand...
Click to collapse
Well there is that and then there's the fact that the pixel is carrier unlocked. Sounds like this guy had no clue what he was doing with this phone. Also like to know what "box" you hooked the phone up to
Has the original poster tried to unlock bootloader again? The pic in the OP shows fastboot. That looks potentially hopeful. Hope that OTA wasn't 7.1.2
Hopefully the seller was legit, maybe the phone is still under warranty??? Waiting sucks, but if it's under warranty you can fix it for free. Might be worth the wait. If not if that's not an option...
I'm guessing this is a Verizon phone? If so, start worrying, bit don't quit, unless you are prepared to spend more money on a new phone. As long as you have fastboot, you have options.
Hello. I tried to unlock my bootloader on FRD-L19, Nougat 7.0, Emui 5.0 i got the unlockcode, but in adb i get alwas this:
fastboot oem unlock 4014054182370213
...
FAILED (remote: password wrong)
finished. total time: 0.008s
I have controlled every serial number etc. 5 times and used both IMEI-Numbers, everytime "passwort wrong" have i to go back to emui 4.1? or what can be the problem??
thank you
soulbreeder83 said:
Hello. I tried to unlock my bootloader on FRD-L19, Nougat 7.0, Emui 5.0 i got the unlockcode, but in adb i get alwas this:
fastboot oem unlock 4014054182370213
...
FAILED (remote: password wrong)
finished. total time: 0.008s
I have controlled every serial number etc. 5 times and used both IMEI-Numbers, everytime "passwort wrong" have i to go back to emui 4.1? or what can be the problem??
thank you
Click to expand...
Click to collapse
Is OEM unlocking turned on?
adriansticoid said:
Is OEM unlocking turned on?
Click to expand...
Click to collapse
yes! : )
soulbreeder83 said:
yes! : )
Click to expand...
Click to collapse
Then this must be a very serious problem since you said you already played with both IMEIs. I'm thinking...
Rommco05 said:
Check FRP in fastboot is locked or unlocked?
Click to expand...
Click to collapse
There stands:
PHONE Locked
FRP Unlock
What means that? I have unlocked the bootloader once of this device. Then he can be unlocked again, right?
Thank you
soulbreeder83 said:
There stands:
PHONE Locked
FRP Unlock
What means that? I have unlocked the bootloader once of this device. Then he can be unlocked again, right?
Thank you
Click to expand...
Click to collapse
PHONE Locked means your bootloader is locked.
Sent from my Honor 8 using XDA Labs
soulbreeder83 said:
There stands:
PHONE Locked
FRP Unlock
What means that? I have unlocked the bootloader once of this device. Then he can be unlocked again, right?
Thank you
Click to expand...
Click to collapse
Yes, your bootloader is locked.. try again via fastboot to unlock it.
You'll need the original key when you are trying it
the Command is something like "fastboot oem unlock *key*".
I know that. Have you seen my problem?? but, thank you anyway! I need to no why i get "wrong password" and what means "frp unlock".
Rommco05 said:
Check FRP in fastboot is locked or unlocked?
Click to expand...
Click to collapse
I tried it again. It doesn't work fu****g huawei...
I have taken 4 picures when i tried it. Can you find an issue? I don't think that i have made something wrong...
Thank you
I've had the same problem and it turned out that the first bootloader code i used ( with DC unlocker) is different from the one i got on the Huawei website.
So what i did eventually was to pay for the DC unlocker again.
I also downgraded back to MM, because i did not manually relock the bootloader before updating to N, which apparently locks the bootloader in a different way.
So I suggest dowgrading to MM and unlocking there plus relocking it before updating again,
IF you are sure you have the right / original bootloader code you used before,
or
use a 3rd party tool like DC unlocker to get the code.
You might have to downgrade to MM as well with this method . Not sure
Edit: Fyi, never post your IMEI online
Sent from my HUAWEI FRD-L09 using XDA Labs
Rommco05 said:
try via this tool https://forum.xda-developers.com/honor-8/development/tool-huawei-multi-tool-team-mt-t3523923
Click to expand...
Click to collapse
haha... maybe i am damn stupid, but i dont fint out, how to open this tool..?!? there are 34 files in the zip-folder, but no programm to open. i can open command window in this folder.. but its the standart window.. can you explain? maybe i should concat huawei, whats wrong and why i cant unlock my bootloader! and whats "frp unlock"?
oh maaan... don't have nerves for rooting this device... -.-
Thank you, for your help
soulbreeder83 said:
haha... maybe i am damn stupid, but i dont fint out, how to open this tool..?!? there are 34 files in the zip-folder, but no programm to open. i can open command window in this folder.. but its the standart window.. can you explain? maybe i should concat huawei, whats wrong and why i cant unlock my bootloader! and whats "frp unlock"?
oh maaan... don't have nerves for rooting this device... -.-
Thank you, for your help
Click to expand...
Click to collapse
It should either be an exe somewhere or just a bat file.
This tool does the same thing as a command window in the sense of unlocking the bootloader.
As far as I know it won't help with your problem.
Frp ( Factory reset protection) requires you to sign with your google account if enabled or you can't use the phone. ( Theoretically that is, I'm i noob myself so no idea)
But it was "locked" ( same as in your pics that is ) for me as well anf I didn't have a problem with it.
Sent from my HUAWEI FRD-L09 using XDA Labs
SharxX8 said:
It should either be an exe somewhere or just a bat file.
This tool does the same thing as a command window in the sense of unlocking the bootloader.
As far as I know it won't help with your problem.
Frp ( Factory reset protection) requires you to sign with your google account if enabled or you can't use the phone. ( Theoretically that is, I'm i noob myself so no idea)
But it was "locked" ( same as in your pics that is ) for me as well anf I didn't have a problem with it.
Sent from my HUAWEI FRD-L09 using XDA Labs
Click to expand...
Click to collapse
Safety is the enemy of freedom!! -.- Sounds very complicated! (sorry for my bad english). So, i was on android 6.1 and unlocked and rooted it. Than had my problems with root again (maybe the wrong supersu file, or something) Then i have downloaded update.app from hihonor and installed it from the external sd card and everything is working fine on my phone. but i can not unlock it. maybe i have the wrong software for my location ore something like that?
FRP unlock means "You have to unlock"? if its unlocked there will be "FRP unlocked"? i am right?
Maybe i should try the whole procedure from beginning. rollback, update etc.. and then try to unlock. or should i contact huawei?
Thank you and a nice evening *cheers* ^^
SharxX8 said:
I've had the same problem and it turned out that the first bootloader code i used ( with DC unlocker) is different from the one i got on the Huawei website.
So what i did eventually was to pay for the DC unlocker again.
I also downgraded back to MM, because i did not manually relock the bootloader before updating to N, which apparently locks the bootloader in a different way.
So I suggest dowgrading to MM and unlocking there plus relocking it before updating again,
IF you are sure you have the right / original bootloader code you used before,
or
use a 3rd party tool like DC unlocker to get the code.
You might have to downgrade to MM as well with this method . Not sure
Edit: Fyi, never post your IMEI online
Click to expand...
Click to collapse
Can just say that again :laugh:
That's all the advice I have. sorry
Sent from my HUAWEI FRD-L09 using XDA Labs
So finally after reading all posts , plz do downgrade to mm and try to unlock
I have the same trouble, I obtained my unlock key from huawei (I'm not going to give my imei to someone else), but I get wrong password.
How can I downgrade to MM? I'm on linux, so I cannot use that multitool (also, I prefer to make thing manually).
Thank you!
aleritty said:
I have the same trouble, I obtained my unlock key from huawei (I'm not going to give my imei to someone else), but I get wrong password.
How can I downgrade to MM? I'm on linux, so I cannot use that multitool (also, I prefer to make thing manually).
Thank you!
Click to expand...
Click to collapse
For downgrade you need a rollback package..
What is your model number and build number??
I have an honor FRD-L09 with build FRD-L09C432B394
I understood that I nned to rollback to emui 4.1 (android MM), then unlock, but after this step I cannot receive ota's so how can I return back to Nougat stock? And you have a trusted download for the needed packages?
I just want to use Titanium Backup to restore all my stuff... and some modifications (pixel launcher, magisk with some modules, viper audio, ad block, something this simple), nothing usually complex!
Thank you!
aleritty said:
I have an honor FRD-L09 with build FRD-L09C432B394
I understood that I nned to rollback to emui 4.1 (android MM), then unlock, but after this step I cannot receive ota's so how can I return back to Nougat stock? And you have a trusted download for the needed packages?
I just want to use Titanium Backup to restore all my stuff... and some modifications (pixel launcher, magisk with some modules, viper audio, ad block, something this simple), nothing usually complex!
Thank you!
Click to expand...
Click to collapse
For downgrade process you don't need to unlock bootloader..when you downgrade you will receive OTA updates..
To use TB you need root..which is required unlock bootloader..
Why you want to go back to MM BTW??
hassanjavaid8181 said:
For downgrade process you don't need to unlock bootloader..when you downgrade you will receive OTA updates..
To use TB you need root..which is required unlock bootloader..
Why you want to go back to MM BTW??
Click to expand...
Click to collapse
I don't want to go back to MM, but as long as I understood this is a needed step to unlock my bootloader.
I experienced the same trouble of the thread creator: the password that huawei gave me is invalid.
SharxX8 said:
I also downgraded back to MM, because i did not manually relock the bootloader before updating to N, which apparently locks the bootloader in a different way.
So I suggest dowgrading to MM and unlocking there
Click to expand...
Click to collapse
My target is to stay at android nougat, with root (magisk if possible).
But with nougat I cannot unlock my bootloader...
hi dear friends
thanks for all who support members
I have mate 9 pro
LON-L29C185B180
when get stock recovery enter erecovery the I used dc phoneix to fix it by stock firmware cost 15€
after this my device fully unrooted frp lock stock recovery but bootloader relock how can I change it to lock please I need your support
.
i try to used dc-unlocker for this steps but the choice not available like thier description like com port and some drivers
see the post for steps
How to lock Huawei bootloader (from RELOCKED to LOCKED)
please help
thanks again to all
You could've done it for free. Anyway. Update using Firmware finder to B180 or use the flash update thread in guides, updating will lock bootloader.
dear ante0 thanks for replay, I will be fine if pay I used dc phoneix to right update.app but not lock. I found thread to flash firmware but only for chinese devices can you please help by llink for this guide?
You could've done it for free. Anyway. Update using Firmware finder to B180 or use the flash update thread in guides, updating will lock bootloader.
Click to expand...
Click to collapse
Dear ante0
thanks a lot
I used firmware finder and it was difficult to use in the beginning to setup settings. after that every things going smoothly. now the bootloader is locked
Dear ante0
thanks a lot
I used firmware finder and it was difficult to use in the beginning to setup settings. after that every things going smoothly. now the bootloader is locked.
after flash fully firmware bootloader become locked and device boot was very fast not like before
You can use Mate_8_rayglobe_knife for relocked to locke again.
Thanks my friend already done
Hello all.
I attempted to flash a ROM a while back and failed miserably. All I managed to do in the end was unlock the bootloader. I would like to change this, and set things back to they way they were; locked bootloader.
Is there anyway to achieve this? I would like to be able to use apps like Uber that won't work with an unlocked bootloader.
Any and all help is greatly appreciated.
cr33p3r1n1134 said:
Hello all.
I attempted to flash a ROM a while back and failed miserably. All I managed to do in the end was unlock the bootloader. I would like to change this, and set things back to they way they were; locked bootloader.
Is there anyway to achieve this? I would like to be able to use apps like Uber that won't work with an unlocked bootloader.
Any and all help is greatly appreciated.
Click to expand...
Click to collapse
Hello I think this could help you
https://youtu.be/8OywEYZ2cbw
This is a video about how to rebrand your mate 9
Now it in the steps it says that after you use the options 2 to rebrand it relock your bootloader, I don't know what mate you have but since you probably installed a custom recovery it is why you can't relock with the command, so my suggestion is this download the WHOTA update and also install the the software finder via Google Play. With it look for your specific model and copy the links to download the files for your specific model in your PC, Also do a Backup of your Oeminfo via the TWRP since it will be the only file you won't find, probably (if it happens to be the MHA-L09 C605 send it to me I need it for my phone I made the mistake of not backing up my Oeminfo).
If you download the files and follow the instructions of the video you will be able to relock your bootloader. But watch it 3 times and also download all the files and make sure to back up everything in your PC if something goes wrong.
Sent from my MHA-L09 using Tapatalk
just flash your oeminfo.bin file again and your bootloader will be locked.. make sure its for your model!
gremy1987 said:
Hello I think this could help you
https://youtu.be/8OywEYZ2cbw
This is a video about how to rebrand your mate 9
Now it in the steps it says that after you use the options 2 to rebrand it relock your bootloader, I don't know what mate you have but since you probably installed a custom recovery it is why you can't relock with the command, so my suggestion is this download the WHOTA update and also install the the software finder via Google Play. With it look for your specific model and copy the links to download the files for your specific model in your PC, Also do a Backup of your Oeminfo via the TWRP since it will be the only file you won't find, probably (if it happens to be the MHA-L09 C605 send it to me I need it for my phone I made the mistake of not backing up my Oeminfo).
If you download the files and follow the instructions of the video you will be able to relock your bootloader. But watch it 3 times and also download all the files and make sure to back up everything in your PC if something goes wrong.
Sent from my MHA-L09 using Tapatalk
Click to expand...
Click to collapse
redhotneo said:
just flash your oeminfo.bin file again and your bootloader will be locked.. make sure its for your model!
Click to expand...
Click to collapse
Thanks guys. I've found a fairly simple solution.
This is the solution that worked for me.
1. Type "fastboot oem relock (your phone's unlock code)" and select unlock or yes with volume buttons & power.
Hopefully this method will help others.
How we do now that there is no more huawei unlock website ? thank you
mrpurple66 said:
How we do now that there is no more huawei unlock website ? thank you
Click to expand...
Click to collapse
hi did you managed to find a way to "unlock" the bootloader w/o the codes?
Only possible with funky huawei an downgrade to android 7
Google for unlock funky huawei. But you have to pay money for this
Huawei stoped every possibilities so only with funky
virtuell_gitarrist said:
Only possible with funky huawei an downgrade to android 7
Google for unlock funky huawei. But you have to pay money for this
Huawei stoped every possibilities so only with funky
Click to expand...
Click to collapse
Hcu-client (A tool by DC unlocker) worked fine last I tested it, was on MHA-L29C432B373
Just flash ur oeminfo.bin file to re lock ur boot loader.. Its that easy. But u lose all ur files cos phone resets
hello, im new in this forum.
i have a mi mix 2s and i wanted to unlock it. mi unlock tool said: device already unlocked..
so I started the flash tool with a global and I think i forgot to switch from "clean all and lock" to "clean all"
so the phone booted in the recovery and said "this version cant be installed on this device"
now I cant do anything...i tried with
- Xiaomi Tool (doesnt works because of usb debugging isnt enabled)
-xiaomi unlock tool says i have to sign in to my account on the device
-Xiomi flash tool (Erase boot error), i tried the official gloabl and china
-adb mode knows my device but no flashing
A friend says there is now software on it. but i dont know
I CAN go to fastboot and i can go to the recovery 3.0
PLS help me! Thank you so much
Try to flash twrp, do factory reset with encryption. Then flash rom with adb sideload
If you have the XE model (which is the Chinese model) and locked your bootloader after flashing the Global ROM your phone is bricked. The Chinese model can't boot up the Global ROM with a locked bootloader. If that's what you did I don't think there is a solution. You need to unlock the bootloader again but if the unlock tool doesn't work I don't know of another option with these phones.
jhs39 said:
If you have the XE model (which is the Chinese model) and locked your bootloader after flashing the Global ROM your phone is bricked. The Chinese model can't boot up the Global ROM with a locked bootloader. If that's what you did I don't think there is a solution. You need to unlock the bootloader again but if the unlock tool doesn't work I don't know of another option with these phones.
Click to expand...
Click to collapse
There was a case like this in the miui forum. The guy there contacted xiaomi support and with their help he could unlock the bootloader without signing in
@sidofido
Do I need usb Debugging for your method?
Usb Debugging does not works
@Flatric
Okay so I send an email to the Support.
Thank you very much, Im happy for every answer
sidofido said:
Try to flash twrp, do factory reset with encryption. Then flash rom with adb sideload
Click to expand...
Click to collapse
Bootloader is locked.
Gesendet von meinem MIX 2S mit Tapatalk
Flatric said:
There was a case like this in the miui forum. The guy there contacted xiaomi support and with their help he could unlock the bootloader without signing in
Click to expand...
Click to collapse
That's apparently true but there were also at least a half dozen people who contacted Xiaomi Support after reading that and reported that they received no help. They are currently trying to get the name of the specific support person who unlocked the bootloader.
That doesnt Sound good... Where can I get Support? I Used [email protected], is that the right way?
Xiaomi98 said:
That doesnt Sound good... Where can I get Support? I Used [email protected], is that the right way?
Click to expand...
Click to collapse
There are threads about this issue on the MIUI Forum. Someone else said today that Xiaomi Support bound his account to his device which allowed him to use the Unlock Tool. It seems to be very hit or miss in regards to getting somebody in support who understands the issue. You should really go to the Xiaomi Forum for the MI Mix 2S. Only Xiaomi can help you and you will get better information there regarding this issue.
I want to flash my Mix 2s from Android P back to Miui 9.5. I purchased the phone with P already installed, does anyone know how I can flash it successfully? I am new at this. my phone says unlocked underneath the xiaomi name when I turn it on so I think its unlocked bootloader? but its not rooted any help would be greatly appreciated
jhs39 said:
There are threads about this issue on the MIUI Forum. Someone else said today that Xiaomi Support bound his account to his device which allowed him to use the Unlock Tool. It seems to be very hit or miss in regards to getting somebody in support who understands the issue. You should really go to the Xiaomi Forum for the MI Mix 2S. Only Xiaomi can help you and you will get better information there regarding this issue.
Click to expand...
Click to collapse
You might be able to fix your issue by flashing the ROM using the MI PC Suite Beta program. That program allows you to flash a ROM when the bootloader is locked but I don't know much about it. Someone in a similar situation as you claimed he got his phone running again using that program.
http://en.miui.com/thread-2943351-1-1.html
---------- Post added at 10:55 PM ---------- Previous post was at 10:42 PM ----------
liquiem said:
I want to flash my Mix 2s from Android P back to Miui 9.5. I purchased the phone with P already installed, does anyone know how I can flash it successfully? I am new at this. my phone says unlocked underneath the xiaomi name when I turn it on so I think its unlocked bootloader? but its not rooted any help would be greatly appreciated
Click to expand...
Click to collapse
Using the MI Flash Tool on your computer is probably the easiest way. Download the latest stable ROM if you want to go back to MIUI 9.5. You need the MI Flash version that ends in extension tgz--not the fastboot version which is a zip file. Uncompress the tgz file, put your phone in fastboot mode and connect it to your computer, open the MI Flash Tool on your computer with administrative access. It should detect your phone. If it doesn't I think there is a refresh button. After your phone is detected point the program to the location of the uncompressed ROM folder. Before you flash look at the options at the very bottom. The default will relock your bootloader so you might want to change that. When you hit flash the tool does everything automatically and returns your phone to stock MIUI.
So..... Miui Support says I have to go to the seller....
The guy in miui forum who solved said, he just tried the latest unlock tool and it works.
I Tried lots of Tools, the latest too and it doesnt Work.
So my Phone is destroyed now?
Xiaomi98 said:
So..... Miui Support says I have to go to the seller....
The guy in miui forum who solved said, he just tried the latest unlock tool and it works.
I Tried lots of Tools, the latest too and it doesnt Work.
So my Phone is destroyed now?
Click to expand...
Click to collapse
Maybe contact them again and hope for a different support person...
Xiaomi98 said:
So..... Miui Support says I have to go to the seller....
The guy in miui forum who solved said, he just tried the latest unlock tool and it works.
I Tried lots of Tools, the latest too and it doesnt Work.
So my Phone is destroyed now?
Click to expand...
Click to collapse
hi, any success?