Database Info

What is NRD90M test-keys ?

I installed the Android Nougat (NXT-L29C432B560) version with THIS LINK. But writes 'NRD90M test-keys' in the phone settings. How can I install to the real (NXT-L29C432B560) Nougat version?

DesertRose65 said:
I installed the Android Nougat (NXT-L29C432B560) version with THIS LINK. But writes 'NRD90M test-keys' in the phone settings. How can I install to the real (NXT-L29C432B560) Nougat version?
Click to expand...
Click to collapse
Are you sure you installed update_data_full_hw_eu too?
If yes, did you start from a NXT-L29C432 version?

a beautiful day...
I had when I had completely nothing more on my Mate 8 had (only twrp)
Via twrp the wrong firmware installed
(2 zip files) wrong cust to be directly
I hope I have all the information so you can help me
My standard version
Factory condition
NXT-L29C185B180
- via adb / fastboot
Bootloader unlocked and
Twrp-3.0.2-0-next-modaco-rc3 geflashed
- root (superSu) - rooted
- with twrp off all deleted ... ?
No OS
Only twrp on internal memory
- bootloader only with volume - and usb
Input available /
- then with twrp
NXT-L29C432B520
(Did not know there will are problems with cust)
- succes 100%
BUT my build number is now
NRD90M test-keys
Conclusion
I have no Bluetooth no designs
The version does not really work
And I can not install twrp more (have tried at least 8 different)
Have no root and can only via dload folder + 3-key combination
Unpacked UPDATE.APP
Have now twrp fir Nougat
(It could not flash via fastboot, since this funny test key Nougat always independently the DebuggModus out), but then noticed it ..
Now I am missing only C185 FIRMWARE (FULL) --- no update --- with 2 zip files .. find only nothing
sry for my bad english
i Hope anyone can help me ?

I faced same problem before but after i do the following steps it works fine for me NXT-L29c432b560
You have to goback again to stock mm b320and then
First unlock bootloader
Flash twrp
From twrp , wip data (yes)
Install insecure bootlaoder b320
Install first update_data_full_hw_eu.zip
Install update.zip
After success
Restart and enter recovery mode hold power & v+
Factory reset and restart it will take min 10
Hope i could help u

thanks for help.. I'm back again now at
Android 6.0 and EMUI 4.0 NXT-L29C185B200 and Bluetooth and so on is working again..
I tried to flash some UPDATE.APP Nougat (C185) via dload but I land everytime at
NRD90M test-keys
or Update stops at 30%
but I'm very happy that I'm back again and have root and recovery ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

i got this test-key once updated from stock B560 to kang577, even now updated to kang580 it is still there
but i could not find any bugs..i got roots, fingerprint, and doubletap function appears when i updated kang577 to 580
does this test-key restricts any mate 8 functions/settings that im not aware of? if not i wouldnt worry and just live with it until new update comes

GEEENAU said:
thanks for help.. I'm back again now at
Android 6.0 and EMUI 4.0 NXT-L29C185B200 and Bluetooth and so on is working again..
I tried to flash some UPDATE.APP Nougat (C185) via dload but I land everytime at
NRD90M test-keys
or Update stops at 30%
Click to expand...
Click to collapse
Please Help! How to Rollback from Nougat to B200? I have this same phone. Reflash isn`t work for me

hello this is working!!!
www.carbontesla.com/2016/11/download-mate-8-official-nougat-rollback-downgrade-package/
if you're at b500 you can easily flash to your firmgrade you just hat before...
via dload, too
I hope I could help!

GEEENAU said:
hello this is working!!!
www.carbontesla.com/2016/11/download-mate-8-official-nougat-rollback-downgrade-package/
if you're at b500 you can easily flash to your firmgrade you just hat before...
via dload, too
I hope I could help!
Click to expand...
Click to collapse
im on c432 there is no file for this, what can i do to go back to my lovly c432b180?

https://www.huaweiblog.de/downloads/mate-8-rollback-emui-4-1-auf-emui-4-0/
you have to translate into you language..
and here is the rollback UPDATE.APP
https://www.hidrive.strato.com/lnk/0mlDFqqy

GEEENAU said:
https://www.huaweiblog.de/downloads/mate-8-rollback-emui-4-1-auf-emui-4-0/
you have to translate into you language..
and here is the rollback UPDATE.APP
https://www.hidrive.strato.com/lnk/0mlDFqqy
Click to expand...
Click to collapse
DUDE YOU SAVED MY ****ING LIVE!
1000x thanks to you! worked with that file!
(couldnt find it anywhere else- thanks)

EGOiST1991 said:
DUDE YOU SAVED MY ****ING LIVE!
1000x thanks to you! worked with that file!
(couldnt find it anywhere else- thanks)
Click to expand...
Click to collapse
You are welcome!

NRD90M test keys
pawn_broker004 said:
i got this test-key once updated from stock B560 to kang577, even now updated to kang580 it is still there
but i could not find any bugs..i got roots, fingerprint, and doubletap function appears when i updated kang577 to 580
does this test-key restricts any mate 8 functions/settings that im not aware of? if not i wouldnt worry and just live with it until new update comes
Click to expand...
Click to collapse
I am also having the same question.
AL10 debranded to L29C432B560 - B180 -> B190 - > system update to B560
and then I updated to Kangvip 577
now I have the test keys too in build.prop but not in about page. In about page it is showing as L29C432B560.
I wanted to do clean install so I tried going back to stock and I couldn't until I got the rollback package. But even then it wasn't easy.
So please tell me did you try going back to stock? Are you also having C432B560?
After getting to B560 - what steps did you follow to update B577? did you get any failed to mount errors during flash?
Please share your experience
Thanks

p9 plus rollback
Hello guys, please help me i'm on the same problem but i don't find any rollback package for my P9 plus

P9 Plus Rollback Package (VIE-L29, from Android 7.0 EMUI 5.0 to Android 6.0 EMUI 4.1,
kurosaki01 said:
Hello guys, please help me i'm on the same problem but i don't find any rollback package for my P9 plus
Click to expand...
Click to collapse
Please check this link
P9 Plus Rollback Package (VIE-L29, from Android 7.0 EMUI 5.0 to Android 6.0 EMUI 4.1, C185B300, MiddleEast&Africa)
http://consumer.huawei.com/kw-en/support/downloads/detail/index.htm?id=92683
Hope this works for you :good::good::good::good::good:

Thank you for your post, I tried another method now and I'm on C432B181, and I'm trying update to C432B360 with firmware finder but download is so slowly hope that's work !

I have L09 not L29 this is the same rollback?

kurosaki01 said:
I have L09 not L29 this is the same rollback?
Click to expand...
Click to collapse
HUAWEI P9 Plus Rollback Package (VIE-L09, from Android 7.0 EMUI 5.0, to Android 6.0 EMUI 4.1, C900B300, Hungarian)
http://consumer.huawei.com/hu/mobile-phones/support/downloads/detail/huawei-p9plus-hu.htm?id=93815
Hope this is the one you are looking for
Don't forget :good::good::good::good:

Yeah thank you, I just find it and it's ok now I m on B181 now, but I don't have a right (update_data_full_hw_eu : full package of them and function of android nougat files) could you plz give some link for the right update_data_full_hw_eu of VIE-L09?

[ROM][7.1.2][OpenKirin's RROS v5.8.4 For Honor 8 ][ Update 12/08/2017 ]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix N v5.8.4 For Honor 8 (FRD)
> Officially Supported Devices : FRD-L02,L04,L09,L14,L19,AL00&AL10 <
*** Stable Version ***
About
Resurrection Remix the ROM has been based on LineageOS, and including some features from SlimROM, OmniROM and original Remix ROM builds, all those creates an awesome combination of performance, customization, power and the most new features, brought directly to your device !​
Click to expand...
Click to collapse
Downloads
* New Update : Changelog RR-N-v5.8.4-20170812-frd-Unofficial.zip md5: e228f9356e77faaf29230848ccb73e55
* Full version : RR-N-v5.8.3-20170628-frd-Unofficial.zip
* Gapps - please, use always the last update !​
Click to expand...
Click to collapse
Installations
* you should have already updated your device to EMUI 5.x B385 !
* your fingerprints registered must be deleted in order to switch to RROS !
* please use the last update of TWRP !
** If you come from EMUI, please format data via TWRP and reboot again to TWRP :
- perform a factory reset
- install RROS 7.1.2
- optional install Gapps
** If you come from other custom ROM's ( but not based EMUI ) :
- go to TWRP and perform a factory reset
- install RROS 7.1.2 ( and optional Gapps )
** Update RROS, from previous version :
- go to TWRP and install RROS
- wipe cache & dalvik
- reboot
- enjoy !!!​
Click to expand...
Click to collapse
Issues
* Encryption !​
Click to expand...
Click to collapse
Sources
* OpenKirin github !​
Click to expand...
Click to collapse
Credit
* OldDroid
* XePeleato​
Click to expand...
Click to collapse
Special thanks to the LineageOS Team, OmniROM Team , SlimROM Team and of course to all the supporters !
RR Screenshots
​
Regards,
XDA:DevDB Information
RROS 7.1.2, ROM for the Honor 8
Contributors
surdu_petru, OldDroid, XePeleato
Source Code: https://github.com/OpenKirin
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Android N (EMUI 5.x)
Based On: LineageOS
Version Information
Status: Stable
Stable Release Date: 2017-05-31
Created 2017-05-13
Last Updated 2017-08-12

Reserved
F.A.Q :
Video camera recording issue ?
- please try to flash EMUI B360 before to switch to RROS 7.1.2 !
Your SIM card are not recognized ?
- please make sure that your SIM card have LTE capability !
Device too hot while charging with stock Huawei charger ?
- please try to charge via USB connected to a Desktop/Laptop, or simply use a different charger, instead the stock one !
Why there is always full network signal ?
- yes, is just a tweak - until we'll find a solution for correct signal scaling, we prefer this compromise solution !
Are you going to switch Selinux to enforcing ?
- for the moment, this ROM is intended to use Selinux in permissive mode - do not try to change this !!!
All your issues, that in fact are related to F.A.Q will be ignored !

Amazing work ! Are the reboots to erecovery as frequent as LOS ?

can honor8 al00 and al10 flash it？there was no LosROMs for Chinese honor8

thank very much? ,,please fix the reboot bug asap

BriceFW said:
Amazing work ! Are the reboots to erecovery as frequent as LOS ?
Click to expand...
Click to collapse
Wondering this myself. . Also, is this compatible with B360 or would I need B380+?
Thanks always for all the hard work!

邓翔宇 said:
can honor8 al00 and al10 flash it？there was no LosROMs for Chinese honor8
Click to expand...
Click to collapse
See page 77 of the Lineage OS. There is a tutorial for AL series.

Just a workaround to fix reboot to erecovery ( now the device will reboot to system, instead erecovery )
Please take a look here to backup erecovery and to flash boot.img over erecovery partition .

Amazing work man, still waiting for the reboot issue to be fixed before I'm going to use this as a daily driver.

surdu_petru said:
Just a workaround to fix reboot to erecovery ( now the device will reboot to system, instead erecovery )
Please take a look here to backup erecovery and to flash boot.img over erecovery partition .
Click to expand...
Click to collapse
That's pretty darn genius actually!
But back to my question, is this compatible with FRD L04c567b360? Or will I need to wait for the b380(or 385?) update?

Hello! Any chance there will be a version for Honor Note 8 too? EDI-AL10
Thank you for info!

Will it support L02.

How about camera? Does the dual camera works ?

ganeshbiyer said:
Will it support L02.
Click to expand...
Click to collapse
Yes, on the next update .

Could I flash this rom in my FRD-AL10 ?

surdu_petru said:
Yes, on the next update .
Click to expand...
Click to collapse
Thank you. Will wait for the update.

Rommco05 said:
Once when the random restarts will be solved and roms gonna be fully stable (or if will be released source codes), is possible or some plan to transfer emui camera app to LOS or RROS?
thx
Click to expand...
Click to collapse
Usually, stock apps are not only apps and depend on stock frameworks for which sources are not opened. So my guess is it may not be possible...

Hi there
I was just wondering if there are any plans to have this rom on the Huawei Mate 8?
Both the Mate 8 and the Honor 8 utilise the same Cpu...
Since official stable versions of Nougat haven't been pushed to the Mate 8, I think many Mate 8 users would be extremely pleased to use this Rom!
Thanks

Replacing boot.img with erecovery
So, I flashed this rom today and decided to try to replace erecovery with boot.img and while testing RR I noticed a app I need is not working so I decided I would go back to emui 5 but when I normally go back (ive done this a few times. ) I flash the update.zip and go to erecovery to download from wifi if it goes into a bootloop (which is happens a lot) and that fixes it. But since I replaces erecovery I don't have it anymore as the option. My question is if I flash update.zip will it replace boot.img with recovery2.img like it replaces twrp with recovery or do I need to flash erecovery back with a shell command? (and what would that command be?)
Thanks for any help,
(sorry if I did anything wrong this is my first time posting.)

shadowsword2143 said:
So, I flashed this rom today and decided to try to replace erecovery with boot.img and while testing RR I noticed a app I need is not working so I decided I would go back to emui 5 but when I normally go back (ive done this a few times. ) I flash the update.zip and go to erecovery to download from wifi if it goes into a bootloop (which is happens a lot) and that fixes it. But since I replaces erecovery I don't have it anymore as the option. My question is if I flash update.zip will it replace boot.img with recovery2.img like it replaces twrp with recovery or do I need to flash erecovery back with a shell command? (and what would that command be?)
Thanks for any help,
(sorry if I did anything wrong this is my first time posting.)
Click to expand...
Click to collapse
U have to reflash erecovery2 to flash update.app .
U cannot flash update.zip of NOUGAT with stock recovery as itself has update.app in it and also a zip with additional files to be flashed in /data/ .
So flash erecovery 2 , downgrade to MM and then update to Nougat .:fingers-crossed:

How to install stock recovery in Honor 4C Marshmallow?

Hi ! Everyone,
I want to remove TWRP and install stock EMUI recovery on my Honor 4C CHM-U01 .
I couldn't find stock EMUI recovery for Marshmallow 6.0 but could find for Kitkat 4.4 and Lollipop 5.1 versions.
Can someone here send me the link for - stock recovery for Marshmallow 6.0.
Or can i use the one from Lollipop version? Does it work?

maxondm said:
Hi ! Everyone,
I want to remove TWRP and install stock recovery on my Honor 4C CHM-U01.
I couldn't find stock recovery for Marshmallow but could find for Kitkat and Lollipop versions.
Can someone here send me the link for - stock recovery for Marshmallow.
Or can i use the one from Lollopop version? Does it work?
Click to expand...
Click to collapse
Here is the link
http://hwmt.ru/oth/HWFF/info/view.php?find_model=CHM-U01

miststudent2011 said:
Here is the link
http://hwmt.ru/oth/HWFF/info/view.php?find_model=CHM-U01
Click to expand...
Click to collapse
The link you have provided is for stock ROM.
I need stock EMUI recovery to replace the TWRP on my Huawei CHM-U01 Android 6.0 .
Please check the image attachment for what i am looking for.
Thanks anyway for replying ! :good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

maxondm said:
The link you have provided is for stock ROM.
I need stock EMUI recovery to replace the TWRP on my Huawei CHM-U01 Android 6.0 .
Please check the image attachment for what i am looking for.
Thanks anyway for replying ! :good:
Click to expand...
Click to collapse
Download the ROM with same build number as on you device, then unzip it and extract update.app using the Huawei updater app extractor and flash recovery.img through fastboot thus you get the stock EMUI recovery replacing TWRP.

miststudent2011 said:
Download the ROM with same build number as on you device, then unzip it and extract update.app using the Huawei updater app extractor and flash recovery.img through fastboot thus you get the stock EMUI recovery replacing TWRP.
Click to expand...
Click to collapse
I tried doing this and found 2 files --- Recovery.img and Recovery2.img inside the .app file. So, not sure what do i do here.
I also have several roms in dload folder and not sure about the version of the ROM inside. Could be B530 or B560. :cyclops:
Is there any tools to check the version of the ROM just from the update.app file.
In short, can you send me the recovery for B560 if you have one?

maxondm said:
I tried doing this and found 2 files --- Recovery.img and Recovery2.img inside the .app file. So, not sure what do i do here.
I also have several roms in dload folder and not sure about the version of the ROM inside. Could be B530 or B560. :cyclops:
Is there any tools to check the version of the ROM just from the update.app file.
In short, can you send me the recovery for B560 if you have one?
Click to expand...
Click to collapse
If you have previously Installed B530 use only recovery.img from update.app or if you have previously Installed B560 use only recovery.img
Currently I dont have B560 Files with me here is the link for B560 Full ROM
http://www.carbontesla.com/2016/06/download-honor-4c-b560-marshmallow-firmware-final-europe/

I extracted the recovery.img from the B560 update.app file and flashed it using adb.
I have now successfully replaced the TWRP with the stock EMUI recovery.
And finally reset the firmware to factory default so now problems i have been getting with Dialer not working and unable to change themes has been working fine.
Thanks for your help ! miststudent2011

maxondm said:
I extracted the recovery.img from the B560 update.app file and flashed it using adb.
I have now successfully replaced the TWRP with the stock EMUI recovery.
And finally reset the firmware to factory default so now problems i have been getting with Dialer not working and unable to change themes has been working fine.
Thanks for your help ! miststudent2011
Click to expand...
Click to collapse
Glad I helped you.?

And here's the file if anybody needs it.
File : EMUI Stock recovery image for HUawei CHM-U01
Filename : RECOVERY.IMG
size: 35.4 MB
Firmware : C432B560
Android : 6.0 Marshmallow
Link: https://mega.nz/#!M9slkCZC!d2tQsU8qPxdKMiaTbi6UKMndLZ-dXzhi5U6A6df-7AE

maxondm said:
And here's the file if anybody needs it.
File : EMUI Stock recovery image for HUawei CHM-U01
Filename : RECOVERY.IMG
size: 35.4 MB
Firmware : C432B560
Android : 6.0 Marshmallow
Link: https://mega.nz/#!M9slkCZC!d2tQsU8qPxdKMiaTbi6UKMndLZ-dXzhi5U6A6df-7AE
Click to expand...
Click to collapse
Got it from update.app?

gopinaidu77 said:
Got it from update.app?
Click to expand...
Click to collapse
Yes he extracted it from update.app from the link I mentioned above.

miststudent2011 said:
Yes he extracted it from update.app from the link I mentioned above.
Click to expand...
Click to collapse
Good one bro

gopinaidu77 said:
Got it from update.app?
Click to expand...
Click to collapse
hay i unlock my device bootloader..while flashing twrp
by app i damage my stock recovery ..and currently i dont have any recovery..so can i download this and flash by flashy app...will it would be safe...because currently i ddont have pc...
plzz reply ASAP

Abhijeet2001 said:
hay i unlock my device bootloader..while flashing twrp
by app i damage my stock recovery ..and currently i dont have any recovery..so can i download this and flash by flashy app...will it would be safe...because currently i ddont have pc...
plzz reply ASAP
Click to expand...
Click to collapse
Most probably flashing stock recovery from flashy won't work.

plzz give me link..???

Hi i have c4 build c185b503
I can not perform a hard reset and I can not enter the recovery menu either from the settings or
through the three on / off keys, sound

Help pleaz

adelnasiri1369 said:
Help pleaz
Click to expand...
Click to collapse
Hey I have some questions about your phone:-
1) Is custom recovery installed on your phone?
2) Is adb working on your phone when you connect it to the PC?

[firmware]STF-L09C432B150 - FullOTA Rollback

Hi guys,
this morning was uploaded STF-L09C432B150 Rollback update (FullOTA) on Huawei server. Here are download links:
http://http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1906/g1642/v105908/f1/full/update.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1906/g1642/v105908/f1/full/STF-L09_hw_eu/update_full_STF-L09_hw_eu.zip
Changelog:
Code:
This update will roll back your phone's operating system to Android 7.0 (EMUI 5.1).
Rollback notes:
1. Please make sure you are currently using the official version of Huawei EMUI, and that no unofficial updates have been installed. Otherwise, there will be risk of an unsuccessful rollback, and an unknown error may occur.
2. Make sure that the current version has not been unlocked or rooted.
3. All user data will be deleted in the rollback. Use an SD card, computer, or Cloud storage to back up all important data before rolling back your phone, and make sure all backed up content is complete and effective.
4. Make sure your phone has more than 50% battery remaining.
5. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorised Huawei service centre for assistance.
6. The system will restart after the rollback. This will take about 10 minutes. Following the update, your home screen will automatically display the EMUI 5.1 theme.

Pa-Jo said:
Hi guys,
this morning was uploaded STF-L09C432B150 Rollback update (FullOTA) on Huawei server. Here are download links:
http://http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1906/g1642/v105908/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/STF-L09_hw_eu/update_full_STF-L09_hw_eu.zip
Changelog:
Click to expand...
Click to collapse
Yes it's mean that Oreo are coming and B150 are the latest stable official version

How can I flash this? Im on b150, but want to flash a clean one.

Sigray said:
How can I flash this? Im on b150, but want to flash a clean one.
Click to expand...
Click to collapse
This is rollback update only, it can be used only if you are using greater official updat from Huawei running on Android 8. and it will downgrade you from Android 8 back to Android 7.

Pa-Jo said:
This is rollback update only, it can be used only if you are using greater official updat from Huawei running on Android 8. and it will downgrade you from Android 8 back to Android 7.
Click to expand...
Click to collapse
I have now beta Oreo STF-L09 8.0.0.323(C432log). So this files are for rollback from this version.
And how to do it? First put update.app from first ZIP file do dload directory and flash it and then do the same with second app? As in this thread: https://androidforum.cz/advanced-search/?keywords=dload&t=76974&sf=msgonly (czech language)

Gnaget said:
Yes it's mean that Oreo are coming and B150 are the latest stable official version
Click to expand...
Click to collapse
yes,, OREO Beta Already running on some Honor 9 devices..
Soon other devices will also get Oreo

hassanjavaid8181 said:
yes,, OREO Beta Already running on some Honor 9 devices..
Soon other devices will also get Oreo
Click to expand...
Click to collapse
Yes I know for the moment Mine phone are running Beta. So far it had been smooth.

Software install failed. It everytime writes this. It does not work for me:-/ Oreo beta doesn't run better than nougat on my phone. How can I downgrade to nougat?
---------- Post added at 01:28 AM ---------- Previous post was at 01:04 AM ----------
I did it without microSD card and copied to the phone. Is the sd card necessary??

Kkozi said:
Software install failed. It everytime writes this. It does not work for me:-/ Oreo beta doesn't run better than nougat on my phone. How can I downgrade to nougat?
---------- Post added at 01:28 AM ---------- Previous post was at 01:04 AM ----------
I did it without microSD card and copied to the phone. Is the sd card necessary??
Click to expand...
Click to collapse
You installing it via dload metbod??

You can use Huawei HiSuite to rollback officially without any hacks

Yes i'm sure because i just did it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have a retail german version of the Honor9
After installing 150 you can also update to 180 via official system -> Update -> Download full package

wow I hope this means Oreo is comming officialy, mine was just updated to B180 since the one that came on the box, I think will be weird get two updates that fast, but I hope it comes soon

It's not ok for me. Not rooted, locked bootloader but when it restarts in recovery it give to me software failed error
I'm really hating Oreo (beta) in Honor 9 because performances are poor and battery too.

Did you do it like explained? Either in Huawei HiSuite or the Phone Manager (App) - No hacks or inofficial ways..

ktwo said:
Did you do it like explained? Either in Huawei HiSuite or the Phone Manager (App) - No hacks or inofficial ways..
Click to expand...
Click to collapse
Using HiSuite I receive the error, even if my device is not rooted, bl is not unlocked and system is not corrupted
I have solved using an approved firmware from Firmware Finder

Oreo rollback
dying_sun said:
Using HiSuite I receive the error, even if my device is not rooted, bl is not unlocked and system is not corrupted
I have solved using an approved firmware from Firmware Finder
Click to expand...
Click to collapse
Hello dying_sun, i have the same problem.
Honor 9, STF L09 (Europe), now with OREO B360
- unlocked bootloader
- TWRP 3.1.1
- rooted with SuperSU
--> after some days I unrooted my device and locked my bootloader
(I use multitool for TWRP and stock recovery)
After unrooting OREO ota came and a realised that the capacitive buttons are not working. Tried different settings, only the home button works
What to do?
--> Rollback to B120.
I downloaded firmwares from different sites and tried different methods
3-button update: Installing failed
dload method sd card: Installing failed (NTFS format, 32 GB)
dload method internal memory: Installing failed
*#*#284...#*#* method, upgrade from sdcard: Installing failed
I tried to flash a kernel.....img (here in forum "Capacity fix" topic) but when I install it over TWRP the device asks me in which flash memory should it be flashed and I do not know what to choose. (system, ODM, splash2, recovery_ramdisk, cache)
I also tried the HWOTA method, but I get the message, that "recovery2" could not be written into ramdisk or something like that and then it stops.
Possible that I did not consider a little detail
Could you please tell me which firmware from firmware finder did you use and which method you choose to make rollback?
Slowly I get desperated with the phone.....
Thanks a lot in advance
Andy

andryuxa20081 said:
Hello dying_sun, i have the same problem.
Honor 9, STF L09 (Europe)
- unlocked bootloader
- TWRP 3.1.1
- rooted with SuperSU
--> after some days I unrooted my device and locked my bootloader
(I use multitool for TWRP and stock recovery)
After unrooting OREO ota came and a realised that the capacitive buttons are not working. Tried different settings, only the home button works
What to do?
--> Rollback to B120.
I downloaded firmwares from different sites and tried different methods
3-button update: Installing failed
dload method sd card: Installing failed (NTFS format, 32 GB)
dload method internal memory: Installing failed
*#*#284...#*#* method, upgrade from sdcard: Installing failed
I tried to flash a kernel.....img (here in forum "Capacity fix" topic) but when I install it over TWRP the device asks me in which flash memory should it be flashed and I do not know what to choose. (system, ODM, splash2, recovery_ramdisk, cache)
I also tried the HWOTA method, but I get the message, that "recovery2" could not be written into ramdisk or something like that and then it stops.
Possible that I did not consider a little detail
Could you please tell me which firmware from firmware finder did you use and which method you choose to make rollback?
Slowly I get desperated with the phone.....
Thanks a lot in advance
Andy
Click to expand...
Click to collapse
First : Are you on nougat or oreo now, and what's your region ?
your phone is booting ok in system, but no capacitives buttons ? So you'll like to fix them before updating ?
When on nougat, for flashing the dload way a service repair nougat firmware, I think you must have formatted your SDcard to exFAT and not ntfs.
I think when using service repair dload files, you must use the same region files the phone is actually.
For info :
3-button update,
dload method,
& *#*#284...#*#* method,
Are all the same.
You also tried the HWOTA method, but which hwota files did you used ?

oslo83 said:
First : Are you on nougat or oreo now, and what's your region ?
your phone is booting ok in system, but no capacitives buttons ? So you'll like to fix them before updating ?
When on nougat, for flashing the dload way a service repair nougat firmware, I think you must have formatted your SDcard to exFAT and not ntfs.
I think when using service repair dload files, you must use the same region files the phone is actually.
For info :
3-button update,
dload method,
& *#*#284...#*#* method,
Are all the same.
You also tried the HWOTA method, but which hwota files did you used ?
Click to expand...
Click to collapse
Hello oslo83,
The phones Emui is now Emui 8.0.0, B360.
I have an unlocked bootloader, booting is ok (message about unlocked bootloader comes first)
Capacitive buttons and flash light are not working --> I would like to fix them (this is the reason why I try to rollback to B120.
I tried to format to FAT 32, but not possible to copy update.app, because of size. With NTFS it worked. --> I try format to exFat
I downloaded a full-service-repair-package for europe from the site 4pda.ru.
Should I use Firmware finder?
What do you mean with "which HWOTA fileS? --> update.zip / update_full_data.zit and a third one..... comlete package, as described.
Thank you in advance.
Andy

andryuxa20081 said:
Hello oslo83,
The phones Emui is now Emui 8.0.0, B360.
I have an unlocked bootloader, booting is ok (message about unlocked bootloader comes first)
Click to expand...
Click to collapse
So, STF-L09CxxxB360.
What's your region ? C432, C10, ...?
andryuxa20081 said:
Capacitive buttons and flash light are not working --> I would like to fix them (this is the reason why I try to rollback to B120.
I tried to format to FAT 32, but not possible to copy update.app, because of size. With NTFS it worked. --> I try format to exFat
Click to expand...
Click to collapse
Maybe to late to use dload as i don't think flashing dload nougat over oreo will work.
And the only public dload service repair firmware available seems to be only nougat.
And downgrading is maybe not usefull as it seems there is a simple fix for you now by flashing kernel...
andryuxa20081 said:
I downloaded a full-service-repair-package for europe from the site 4pda.ru.
Click to expand...
Click to collapse
What version ? What region ? L09CxxxBxxx ?
andryuxa20081 said:
Should I use Firmware finder?
Click to expand...
Click to collapse
No, not in your case.
I think FF won't help for downgrading.
And again, i think you don't need anymore.
andryuxa20081 said:
What do you mean with "which HWOTA fileS? --> update.zip / update_full_data.zit and a third one..... comlete package, as described.
Click to expand...
Click to collapse
No, I meant where did you get your hwota8.rar from ?
Where you using the new one for oreo or the old one for nougat ?
So for you the better will be to flash kernel fix : https://forum.xda-developers.com/newreply.php?do=newreply&p=75772700
Help yourself, follow the instructions and don't try to install it over TWRP as you did before.

oslo83 said:
So, STF-L09CxxxB360.
What's your region ? C432, C10, ...?
No, I meant where did you get your hwota8.rar from ?
Where you using the new one for oreo or the old one for nougat ?
So for you the better will be to flash kernel fix : https://forum.xda-developers.com/newreply.php?do=newreply&p=75772700
Help yourself, follow the instructions and don't try to install it over TWRP as you did before.
Click to expand...
Click to collapse
What's your region ? C432, C10, ...?
Build Nr. STF-L09 8.0.0.360(C432)
No, I meant where did you get your hwota8.rar from ?
I got the HWOTA_base.zip from here "https://4pda.ru/forum/index.php?showtopic=793006&st=920#entry60779691"
Where you using the new one for oreo or the old one for nougat ?
I think that I used one for Nougat...... :-/
There is nowhere a note where to flash this kernel to? --> boot?, recovery_ramdisk? Splash? system? cache?
Do you perhaps know which flash directory should I use?

[Tool] [HuRUpdater] [0.4] [Flash official firmware in recovery

Here I present my tool to flash Honor stock firmware in TWRP recovery. I have tested it on all currently available firmwares for Honor 9 STF but still this tool is beta.
HuRUpdater
Huawei Recovery Updater​
Flash official firmware zip files
Can detect if firmware locks bootloader
Can detect if firmware wipes data
Download:
HuRUpdater_0.4.zip
Tested up to STF-L09C432B369
HuRUpdater_0.3.zip
HuRUpdater_0.2.zip
Tested up to STF-L09C432B362
It's recommended to use a proper custom recovery (with running oeminfo_nvm_server service) like for example my version of TWRP.
How to use:
Warning: Make sure you know what you are doing and do not flash firmware from other devices.
Download firmware files (for official firmware use Huawei Firmware Finder).
Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
update.zip (use FullOTA file)
update_all_hw.zip
update_data_public.zip
Optional: Put recovery.img in same folder if you want to keep custom recovery.
Put HuRUpdater zip in same folder. Example:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select only HuRUpdater to flash in custom recovery.
Follow instructions on screen. Flashing can take multiple minutes.
Problems:
If firmware includes factory reset
Factory reset is not supported by custom recovery. Therefore HuRUpdater will flash stock recovery before launching factory reset. After flashing firmware and doing factory reset, you need to flash recovery manually.
Supported devices:
Honor 9
Honor View 10 (confirmed* by Rommco05)
Huawei P9 Lite (confirmed* by Tecalote)
Huawei P9 (confirmed* by Tecalote)
Huawei P Smart (confirmed* by flibblesan)
Huawei Mate 9 (confirmed* by ante0)
Huawei Mate 10 (confirmed* by Tecalote)
Huawei P20 (confirmed* by realz88)
Honor 8 (confirmed* by [email protected])
Huawei P8 Lite (2017) (confirmed* by neverdies)
Honor 6X (confirmed* by siddhrsh)
Huawei Mediapad M5 (confirmed* by ZeuseZ)
Other Huawei/Honor? Try and let me know
* first confirmation
Bugreport:
Post full /tmp/recovery.log file in comments
Thanks to all testers who report new devices working. Especially big thanks to @Tecalote who provided me with extensive testing / logs and found bugs.
XDA:DevDB Information
HuRUpdater for Honor, Tool/Utility for the Honor 9
Contributors
zxz0O0
Version Information
Status: Beta
Created 2018-03-27
Last Updated 2018-09-23

Reserved
Changelog:
0.4
Add static busybox
Update installer binary
0.3
Fix set_metadata (do not abort)
Add own busybox for recoveries with bugged version
Rename zip files to match HWOTA names
Click to expand...
Click to collapse

very good,
only a question: recovery.img that have put in directory, have to be Stock recovery image orTwrp?

angelobiz said:
very good,
only a question: recovery.img that have put in directory, have to be Stock recovery image orTwrp?
Click to expand...
Click to collapse
Stock recovery.

angelobiz said:
very good,
only a question: recovery.img that have put in directory, have to be Stock recovery image orTwrp?
Click to expand...
Click to collapse
Custom recovery. When you flash stock firmware, the recovery is overwritten. By placing a recovery.img of TWRP in the folder, it will be automatically flashed after stock firmware. Therefore you will keep custom recovery.

Sorry for my bad english.
I'm on Oreo B360 with root and custom twrp (0.2).
Can i use this tool to downgrade to Nougat?
I would like to go back to B183 version...
Inviato dal mio STF-L09 utilizzando Tapatalk

lalaspdn said:
Sorry for my bad english.
I'm on Oreo B360 with root and custom twrp (0.2).
Can i use this tool to downgrade to Nougat?
I would like to go back to B183 version...
Inviato dal mio STF-L09 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes it should work. Downgrading to 183 will format data so make a backup.

Wonderful! It also solves the problems with bricked Honor 9

This tool is amazing. It should be a sticky post. You've no idea how many people will be saved by this tool. Dude, you rock amazingly. Be proud of yourself! It saved me countless hours of flashing, after many hours trying to recover a bricked honor 9... You should post this tool on Reddit with relevant information. It's an amazing tool.

can i use it for flash the stock fw on top the RRoS(android 7.1)?

Amazing tool that will delight more than one

realz88 said:
after many hours trying to recover a bricked honor 9...
Click to expand...
Click to collapse
If you can load to or flash and load to twrp your device is NOT bricked! )) It is very easy to flash zip's of official ROM in this case with or without this tool. This tool is very good by 2 reasons: 1) Can detect if ROM wipes data. 2) Can detect if ROM locks bootloader. It is very convinient! Good job.
PS Your device is bricked if you have error 2 and error 11 when trying to boot. It is not also a problem if you can still reach erecovery.

@zxz0O0 I'm on B360 and want to update to B362 but FF says it's not authorized (all versions say that), so I'd like to know what version you used and what is the danger (if any) of flashing an unauthorized firmware version.

JBolho said:
@zxz0O0 I'm on B360 and want to update to B362 but FF says it's not authorized (all versions say that), so I'd like to know what version you used and what is the danger (if any) of flashing an unauthorized firmware version.
Click to expand...
Click to collapse
Risk of flashing an unauthorized firmware:
None, that's just the relase method Huawei choose https://en.wikipedia.org/wiki/Phased_adoption
Risk of flashing a firmware:
Same as with official way, you could brick / destroy your device if you for example power off during fw flashing.

Rommco05 said:
Hi, this tool is based on nocheck recocery? Im just curious if will work on another devices. Still can't test...
edit: also can be flashed small OTA update instead full OTA?
Click to expand...
Click to collapse
No it's not based on nocheck recovery. I have never tried small OTA files but it could work maybe.

@zxz0O0 Flashed latest B362 (dated March 28th) with no issues, thank you.
By the way, that March 23rd release of B362 has apparently been removed from server (that's what FF was saying on mine)

Great, works fine on Mate 9 (Although got E: Unknown command []] 2 times).
Updated from C432B366 to C432B367-SP1, mainly to test because B367-SP1 is some test firmware.

ante0 said:
Great, works fine on Mate 9 (Although got E: Unknown command []] 2 times).
Updated from C432B366 to C432B367-SP1, mainly to test because B367-SP1 is some test firmware.
Click to expand...
Click to collapse
Thanks for feedback. This error is actually caused on how TWRP interprets the output of the flashable zip. It can be ignored.

Rommco05 said:
Succesfully installed two updates in order BKL-L09C432B140 > BKL-L09C432B141 (both FULL OTA). This is amazing! Just small output, script detect bootloader will be locked but after installation wasn't. Very quick installation.
Click to expand...
Click to collapse
Did you used my version of TWRP for Honor 10?

Rommco05 said:
Yes, v0.3
Click to expand...
Click to collapse
Thank you, that's great! The 0.4 should also work.