Note:
This is not bootanimation, this is the splash screen (the boot logo which is displayed when device is switched ON)
This is for ZTE Nubia M2 Only..
(For other devices, please send me your splash.img so that I can create a tool for you too..)
Requirements:
1. Rooted ZTE Nubia M2 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this in computer: ZTE_Nubia_M2_Splash_Maker.zip
2. Make sure you have a picture with resolution 1080x1920px.
Now rename your picture as logo.png or logo.jpg (according to its format) & replace it inside "pics" folder of the extracted folder.
3. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Based on my original tool for ZTE Nubia Z11 MINI
2. @Skake who provided the stock splash.img of ZTE Nubia M2.
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Splash collection
This week I will start creating splashes for the Nubia M2 If all goes well then I will publish here ..I have already created for the redmi 3s long ago ... and now I try my hand at this new project thanks to goku
Very nice!! Thanks for this mate
when in bootloader, i'M getting waiting for device
why is that? oO
Related
Note:
This is not bootanimation, this is the splash screen (the 'Mi' boot logo which is displayed when device is switched ON)
This is for Redmi 4 Pro/Prime Only (which has 1080x1920 resolution)..
For Redmi 4 or 4A, please send your device's splash.img as given in link below.
(For other devices, please send me your splash.img so that I can create a tool for you too.)
Requirements:
1. Rooted Redmi 4 Pro/Prime (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this in computer: Redmi_4_Prime_Pro_Splash_Maker.zip
2. Make sure you have a picture with resolution 1080x1920px.
3. Now copy your picture inside "pics" folder and rename your picture as logo.png or logo.jpg (according to its format).
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Thanks to @ishehad who provided the stock splash.img of his Redmi 4 Pro
2. This is just a modified copy of the tool for Lenovo Vibe K5 Plus
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Nice. Do I need re-flash everytime I change rom?
And where can I find stock splash.img in my device?
Works great!
(I put a personal picture, so I prefer not upload an example, but it came out great).
I never dreamed that suddenly pop up an official guide for my model,
And certainly i never dreamed that the credit I deserve.
All credit goes to you!
Thank you very much! :good:
nice !
I'm try this guide on my redmi 4 prime… but why the end bootsplash no change…?? Still mi.com…
I followed the steps carefully, i'll say that this works like charm!
um... How do you think it would apply to redmi note4x?
Assuming yes to both, as this is before we get to system startup, but:
1) this will work regardless of rom?
2) this will work on encrypted phone?
Thanks a lot dear! Very useful!
Built custom splash screen and flashed on stock rom, it worked fine. Dirty flashing Epic ROM didn't replaced splash screen, can't say about fastboot flash.
How do I extract the .png/jpg image from stock splash.img ?
pauloecs said:
How do I extract the .png/jpg image from stock splash.img ?
Click to expand...
Click to collapse
You may try Android Image Kitchen. Both pc and Android version are available on XDA.
Thanks for the great tool! It worked great on my device.
I made some Google Logo Spalsh images, the original images were extracted from here, and I made some changes with PS.
Hope you guys would like it
Google-Evolved-Splash.zip
GoogleG-Evolved-Splash-BlackWhite.zip
GoogleG-Evolved-Splash-Coloured.zip
Note:
This is not bootanimation, this is the splash screen (the boot logo which is displayed when device is switched ON)
This is for ZTE Nubia Z11 Mini Only..
(For other devices, please send me your splash.img so that I can create a tool for you too..)
Requirements:
1. Rooted ZTE Nubia Z11 Mini (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
1. Download & Extract this in computer: ZTE_Nubia_Z11_MINI_Splash_Maker.zip
2. Make sure you have a picture with resolution 1080x1920px.
Now rename your picture as logo.png or logo.jpg (according to its format) & replace it inside "pics" folder of the extracted folder.
3. Finally, run the 'CREATE_LOGO.bat' to create splash.img and flashable zip file, which you can find inside the "output" folder after completion.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Based on my original tool for Lenovo Vibe X3
2. @sky0hjh who provided the stock splash.img of ZTE Nubia Z11 Mini.
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
It works well.Thank you very much!
Thank you for tutorial
Wonderful, Nice tutorial.
Worked well
Bootanimation
Please someone who uses Nubia z11 or z11mini or z17 or z17mini provide me the stock boot animation
The stock splash screen work on Nubia Z17 Lite
Note:
This is not bootanimation, this is the splash screen (the 'Yu' boot logo which is displayed when device is switched ON).
This is for Yu Yuphoria Pure-Android (Yu5010A) Only..
For Original Yuphoria (Yu5010), click here: Creating custom splash.img for Yu Yuphoria, Yunique & Yutopia
(For other devices, please send me your splash.img so that I can create a tool for you too.)
Requirements:
1. Rooted Yu Yuphoria Pure-Android Yu5010A (32bit bootloader) (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
1. Download & Extract this in computer: Yu5010A_Splash_Maker.zip
2. Make sure you have a 720x1280 resolution picture.
3. Now rename your picture as logo.png or logo.jpg (according to its format) & replace it inside "pics" folder of the extracted folder.
(Similarly you can also change fastboot.png if you wish to change the picture of fastboot)
4. Finally, run the 'Create_Logo.bat' to create splash.img , which you can find inside the "output" folder.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. @GokulNC (myself ) who wrote this script
(This one is just a copy from my thread here: [GUIDE] How to Create Custom Splash Screen for Lenovo A6000)
2. @arnithkumar who provided the stock splash.img of Yu5010A (Pure Android Yuphoria)
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Works!!
I used the method for Yu5010 on the other thread and ended up with a linux penguin as boot screen.
Later i tried the methon in this thread and it works fine
Thank You!
Creating custom splash.img for BQ Aquaris X5 Plus:
Note:
This is not bootanimation, this is the splash screen (the logo which is displayed when device is switched ON)
This is for BQ Aquaris X5 Plus only..
For other devices, please send me your splash.img so that I can create a tool for you too.
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
STEPS:
1. Make sure you have a picture for your custom splash with:
i. Resolution: 1080x1920 px
ii. PNG or JPG format
iii. picture size less than 200kB
iv. less colorful
(Tip: Try compressPNG.com to reduce no. of colors in PNG picture.
Upload your picture, click Settings, reduce number of colors to 16 or below & download it)
2. Download this tool to your computer: CM_Splash_Maker.zip
And extract it.
3. Drag & drop your splash picture on the file "CREATE_Logo.bat" & select your device.
4. After the custom splash image (filename.img) is created, the output directory will be opened..
5. Transfer the filename.img to the device's internal storage & flash it using Terminal Emulator like:
Code:
dd if=/sdcard/filename.img of=/dev/block/bootdevice/by-name/splash
(Or you can flash it from fastboot as given below)
Note:
Incase you flashed & your device doesn't bootup, don't worry
Just flash the original splash.img from fastboot like:
Code:
fastboot flash splash splash.img
Credits:
1. @CHV who provided the stock splash.img of BQ Aquaris X5 Plus (gohan)
2. Based on my original tool for Yu devices here..
Hit the Thanks :good: button if it worked for you
Don't forget to post here the custom splash screens that you made, since others may find it useful
Note:
This is not bootanimation, this is the splash screen (the 'Mi' boot logo which is displayed when device is switched ON)
This is for Redmi 5 Only..
For other devices, please send me your splash.img so that I can create a tool for you too.
Requirements:
1. Rooted Redmi 5 (any ROM)
2. Optional: Terminal Emulator app or Custom Recovery or atleast working fastboot in computer
3. You're proceeding at your own risk.
STEPS to create splash.img:
Before proceeding, make sure fastboot is setup properly in your computer (just incase something goes wrong)..
1. Download & Extract this in computer: Redmi_5_Splash_Maker.zip
2. Make sure you have a 720x1440 resolution picture.
3. Now replace logo.png and logo2.png with your pictures (according to any format) & replace it inside "pics" folder of the extracted folder.
(Similarly you can also change fastboot.png if you wish to change the picture of fastboot)
4. Finally, run the 'CREATE_LOGO.bat' to create splash.img , which you can find inside the "output" folder.
STEPS to flash splash.img:
Optional: To backup your original splash.img:
Code:
dd if=/dev/block/bootdevice/by-name/splash of=/sdcard/splash.img
(Not necessary though.. You may get it from the stock firmware itself.)
Now, Choose any one easy method:
a. To flash from recovery:
Transfer the flashable_splash.zip to your device and flash from TWRP or CWM or Philz or any other custom recovery.
b. To flash from Terminal Emulator:
Transfer the splash.img to your device's Internal Storage, Open Terminal Emulator & enter the following to flash it:
Code:
su
dd if=/sdcard/splash.img of=/dev/block/bootdevice/by-name/splash
c. To flash from Fastboot mode:
Code:
fastboot flash splash splash.img
Note:
Incase something goes wrong or device doesn't bootup, flash the stock splash.img from custom recovery or fastboot.
Credits:
1. Thanks to Роман ([email protected]) for the stock splash.img of Redmi 5.
2. This is based on my tool for Redmi 5A
Hit the Thanks :good: button if it worked for you
You're welcome to post the splash images that you created..
Working, thanks!
Great work!
I have to sign-up to hit the thanks button. :good:
I need this for redmi 7. Please help.
Please Make it For Redmi 7