Selfie Stick with USB C to Audio Adapter issues - Essential Phone Accessories

Hey guys. Just got my Essential last week so I'm still getting up to speed with it. Connected my old Selfie Stick with the adapter.
Interesting that when I did, the USB-C adapter performed a firmware update! But every time I push the button on the stick, the
Google Home screen pops up. Looked through the settings menu and found nothing. Google - nada. Anyone have some feedback?
Thanks

Related

Google TV hack!

Greetings Programs!
I have found the recovery menu for Sony's Google TV/BluRay player!
Here are the details on how to access it (from my original post here: androidforums.[COM]/google-tv/201827-sony-google-tv-hack.html)
OK... so I found out how to get into recovery mode on the Sony Google TV/BluRay player that was released yesterday.
1.Have everything plugged into the unit except the power coord. Have the power coord in your hand.
2.Press and hold the power button and plug the unit in.
3.Continue to hold down the power button for 3 seconds after plugging it in, then release the power button.
4.Wait a couple of seconds and it will say Sony, then you will see the recovery screen.
5.After it loads, press and hold the connect button on the unit. Then follow the directions at the bottom of the screen (Press and hold ALT+ENTER) for 8 seconds/until the bottom message changes. It will change back to it saying that you have to press the CONNECT button, but your remote IS connected.
6.You can now press the numbers assigned to the commands!
WARNING: This could possibly brick your unit and could possibly void your warranty. I am not responsible for anything that happens to your device.
I am going to work on trying to find working drivers and I am going to try to use the Android SDK Tools to install some applications, or at the least try to execute some shell commands. Hopefully we can root it!
Click to expand...
Click to collapse
Lets start hacking!
awesome, I will have to keep my eye on this. google TV plus angry birds would be awesome.
Looking forward to seeing this thing cracked! I'm hoping someone will be able to get a USB tuner to work on one, so those without cable or satellite will be able to get TV content without the hassle of another set-top box.
Nice.... Wonder what the possibilities are
Sent from my PC36100 using XDA App
OK Guys, I am still working on it. Heres a video of me booting it into the recovery mode.
http://www.youtube.com/watch?v=L21guovXDsc
Thanks for the information about recovery, I tried it, and was able to get into recovery. I tried writing the logfile to USB, and it "seemed" to work, but after mounting the USB stick on my linux machine, I didn't see any files there.
I bought the Sony NSZ-GT1 so I could port my Android app Better Terminal Emulator Pro onto Google TV. I already ported it to Android-x86 in preparation for this, but seems like I could not ADB into the Google TV over Ethernet. Frustrated, I decided to take a screwdriver to my Google TV, and did a "teardown" as a result. You can see what the guts look like here:
http://www.magicandroidapps.com/wiki//index.php?title=Main_Page#Sony_NSZ-GT1_Google_TV_Teardown
Sorry the pictures are not that great, I used my Moto Droid to take them, and the lighting was terrible.
-Howard
hharte said:
Thanks for the information about recovery, I tried it, and was able to get into recovery. I tried writing the logfile to USB, and it "seemed" to work, but after mounting the USB stick on my linux machine, I didn't see any files there.
I bought the Sony NSZ-GT1 so I could port my Android app Better Terminal Emulator Pro onto Google TV. I already ported it to Android-x86 in preparation for this, but seems like I could not ADB into the Google TV over Ethernet. Frustrated, I decided to take a screwdriver to my Google TV, and did a "teardown" as a result. You can see what the guts look like here:
magicandroidapps.com
Sorry the pictures are not that great, I used my Moto Droid to take them, and the lighting was terrible.
-Howard
Click to expand...
Click to collapse
ETHERNET? Hasnt anyone tried USB A to USB A cable? I've been busy all day. Gonna go get one tomorrow and figure it out for myself I guess. Can't stand that they have ALREADY corrected the hulu fix for the thing. Why shouldn't I be able to access my paid July plus account? Oh well.
Try USB a to USB a!!!!!
USB A to A will definitely not work. All of the USB ports are connected through internal SMSC 4-port hubs. There are two hubs in the unit, one in the back with 3 ports going to external connectors, and one going to the WLAN module. Up front there is another 4-port hub going to the front USB connector, and presumably to a BT module, but I didn't take mine far enough apart to be sure.
There is one large connector over near the CPU that might have some debug stuff on it.There are also about three 4-pin connectors populated, one of which might be a UART. There is also a footprint for another. Tomorrow I'll get my oscilloscope out and see if any of those pins wiggle on boot.
-Howard
hharte said:
USB A to A will definitely not work. All of the USB ports are connected through internal SMSC 4-port hubs. There are two hubs in the unit, one in the back with 3 ports going to external connectors, and one going to the WLAN module. Up front there is another 4-port hub going to the front USB connector, and presumably to a BT module, but I didn't take mine far enough apart to be sure.
There is one large connector over near the CPU that might have some debug stuff on it.There are also about three 4-pin connectors populated, one of which might be a UART. There is also a footprint for another. Tomorrow I'll get my oscilloscope out and see if any of those pins wiggle on boot.
-Howard
Click to expand...
Click to collapse
Yeah, the big long/wide plug. I was looking at the inside of my box too. First day jitters. Anyway, I was also going to start looking for a serial port connection through one of those ports. Good luck and post right away if you find something!
If somene with an ethernet sniffer who has not booted their box yet can catch a sniff of the update download, it might be possible to get the update.zip URL, then we could try hacking the update and install it via recovery. This method was very popular with Android devices... but there you could get the update URL from the logcat
-Howard.
Have we not figured out how to use log copy? It doesn't seem to like anything i plugged in to copy to...
Sent from my PC36100 using XDA App
Great job guys! My friend is going to be getting a GTV later this week, and I will try to get it from him before he boots it up. Guess I will stop trying USB A to USB A.
Will post results later tonight.
Another possibility is to try and find the kernel source. If you look in Settings, system Information, Open Source Licenses, there is a site on Google Code that is supposed to contain the GPL'd components:
http://code.google.com/p/googletv-mirrored-source/
Going there doesn't show much except one user space component, and a link to a Sony mirror site:
http://products.sel.sony.com/opensource/
I couldn't find anything useful on the Sony site, but maybe someone else will have better luck.
I'll also try plugging in a USB Serial adapter, but my expectations are pretty low that I'd be able to get a console from that. It's interesting that there are so many USB ports on the Google TV. I wonder what other USB peripherals might be supported? I can see the front port being used for a USB memory stick, and maybe one on the back for a camera, but that still leaves two unused ports. Any idea what Sony/Google might have intended them for?
-Howard
http://www.magicandroidapps.com - Home of Better Terminal Emulator Pro
hmm
I have this unit and usb keyboards and mice do work . Also iremember a rep saying the logitech cam would work with the sony blu-ray also. I think you would need to wait for the android store to open though for an app that uses it.
hharte said:
I couldn't find anything useful on the Sony site, but maybe someone else will have better luck.
Click to expand...
Click to collapse
Did you look here : sony.net/Products/Linux/TV/NSZ-GT1.html
That looks like it, thanks! Nice that they have minicom and busybox listed there, so there is hope that some hacking tools are preloaded on the Google TV.
-Howard
Not sure if this helps anyone or not, but i ran a port scan on my box and there are 2 ports 9551 and 9552 that are accepting TCP connections.
nmap -p - <IP address of NSZ-GT1>
result :
PORT STATE SERVICE
9551/tcp open unknown
9552/tcp open unknown
I tried to get ADB to connect to those ports but did not work.
Steps that I tried :
1) export ADBHOST=<IP address of my PC>
2) adb kill-server
3) adb devices
No ADB devices were returned
4) adb connect <IP address of Sony NSZ-GT1>:9551
5) adb shell
Got error "error: device offline"
6) repeat steps 4 and 5 except with port 9552 and got same result
I am no expert in any of this stuff so the above might just be sending someone down a rabbit hole but I figured I might share in case it might be helpful to some of the smarter people on here.
Try "adb devices" and see if it show anything.
I looked at the kernel from the Sony site:
http://www.sony.net/Products/Linux/TV/NSZ-GT1.html
Here are some findings:
Linux kernel version: 2.6.23.18_nl-btv
Kernel config:
arch/i386/configs/btv_defconfig
CONFIG_USB_SMSC9500=m
Note the SMSC 9500 USB/Ethernet is one of only two loadable modules in the kernel config. Maybe this has some significance, like maybe they use a second Ethernet port for development.
-Howard
Very interesting.... I am thinking of getting a second unit to try to intercept the update.zip.... would anyone be able to tell me how I would do this?

HDMI and USB at same time

Hi,
Saturday I had some time to open the HDMI dock (for Galaxy Tab 7) and mod it to have alternative power input.
After that I was able to use the HDMI output and USB host at same time. The setup is:
- HDMI out for Samsung TV
- wireless USB keyboard
- external HDD connected with a powered HUB
In this setup I was able to use the keyboard and video files from external HDD while watching on TV screen.
The only problem is that the "MTP Application" notification is still there and the tablet is not full powered from external power supply, it discharges slowly the battery.
After some investigation I've seen that on the original charger there seems to be some resistors between USB lines and Vusb and GND. If I connect the original charger (not inserted on power outlet) the tablet is full powered and the MTP Application is not displayed (when I put the tablet in dock). After that if I remove the cable and insert the USB host cable everything is OK and tablet is full powered with USB host and HDMI working.
The docking is powered with 5V/2A PDA DC adapter.
When I'll open the dock again I will make some picture.
Your are welcome for questions and suggestions.
Emil
HOW MUCH?
Cant believe this is my first post on any message board EVER but what better reason! First i would like to know how much would u charge to make the modification for me? I would provide the dock and any other materials that u need of course. Secondly, since the dock works with ALL tab variants(PERSONALLY ONLY TESTED WITH P1000, P7100, P6200, P6210 BUT 99% CERTAIN), u might want to post your development in every other versions forum. I believe this would generate a LOT more interest in this project because there actually has already been a few threads created in which several attempts were made but no one could find the magic combo(plus it could mean a few extra bucks in your billfold!). I waited to post in hopes that u would update with pictures and/or a tutorial but still would rather you perform the actual surgery. Congratulations on accomplishing what samsung should have done from the start...a TRUE multimedia dock! I guess the only suggestion i could offer is if it were possible to actually add a few usb ports into the base of the hdmi dock itself, which is how i feel samsung should have made it originally...definitely not a priority.
Here are a few reference threads if interested & i've already provided a link in each one pointing to your original post for those interested (hope u dont mind!)
http://forum.xda-developers.com/showthread.php?t=1610832
http://forum.xda-developers.com/showthread.php?t=1155065
http://forum.xda-developers.com/showthread.php?t=1149442
Sorry, but I can't do this for you.... It's complicated.
Now I work to found a solution to put an USB connector on the dock and to put a power connector to.
The big problem is that the tab enters on MTP mod when powered this way. As described on other threads there is a way with USB lines to activate full external power.
When I'll have a full modification dock I'll put some pictures and instruction for that.
waiting for pics and further info please...
Galaxy Tab Dock modified
Now I have a full functional dock, modified.
So, after receiving the Galaxy Tab Plus media dock from ebay I've found that I can change the tab fixing part with the one on the old Galaxy Tab Dock.
So, now I have old Galaxy Tab multimedia dock full compatible with my Galaxy Tab Plus.
Then I modified the dock to include standard power jack and standard miniusb connector for OTG.
The USB Host is powered from the external power supply, this helps to not discharge the battery when using tab and slow charging.
I made some pictures with details for connections and modification.
You can view at:
http://www.flickr.com/photos/buzdumil/sets/72157630734690786
There was some work to do...is not very easy. The best thing that can be done is to make a PCB. That PCB, at in my pictures, could be fixed near metal weight. Also there the clips of the case need to be cut, but there is no problem because at same position exist screws for fixing.
The problem with MTP application started when power connected or tab inserted on dock remains. But now is easier to use external HDD, usb keyboard & mouse and television to watch movies.
That's amazing, Emil! That's the dock accessory Samsung should have sold in the first place. After looking over your pictures, I'm ready to go order a soldering iron and get to work!
Hi emil b just letting you know i was playing around with my dock and found how to get rid of the red x from when power is applyd.
First connect power and get red x....
Then disconect the earth and re connect it again..
This forces AC Charge mode...
No resisters or shorting data lines are needed..
So good for being in host mode...
All you need to do is put a on/off switch inline on the earth
Where you supplied power to the dock.
Doesnt need to be inside the dock..
Give it a try and let me know...
Just have to play with it and hit switch a couple of times...
Im looking at all options concerning the modification of this dock. One question that comes to mind is: If I only use the red and blackwires to send power to the USB connector, will I still be able to use the OEM 30 power connector??
OP, I am going to attempt to make this modification myself. Would you be able to provide any additional instructions/suggestions to the pictures up on Flickr?
Thanks,
cypher
mr_esmit said:
Im looking at all options concerning the modification of this dock. One question that comes to mind is: If I only use the red and blackwires to send power to the USB connector, will I still be able to use the OEM 30 power connector??
Click to expand...
Click to collapse
No because the origonal charger has the resisters on the data lines...
you are better to add just power to pin 7(9) and earth to pin (1)30..
then add a otg dongle..

Constant connecting/disconnecting when USB plugged in to computer

Got my new GS6 a week ago and now i went to transfer some images and when i connect it to the computer it makes the USB connected sound and suddenly starts disconnecting and reconnecting like crazy, has anyone else experienced this? gotta get my hand on a replacement cable just in case thats the problem..
Yeah it's the cable
soapBro said:
Got my new GS6 a week ago and now i went to transfer some images and when i connect it to the computer it makes the USB connected sound and suddenly starts disconnecting and reconnecting like crazy, has anyone else experienced this? gotta get my hand on a replacement cable just in case thats the problem..
Click to expand...
Click to collapse
Same problem here and mine s6 is only 26 days old.... support told me it's the cable but refused a replacement... what the hell right?
I have the same thing and have tried a few cables. Did you get to the bottom of the issue? My laptop is a dell xps15 and it happens with W8.1 and Mint17 (on the same laptop).
soapBro said:
Got my new GS6 a week ago and now i went to transfer some images and when i connect it to the computer it makes the USB connected sound and suddenly starts disconnecting and reconnecting like crazy, has anyone else experienced this? gotta get my hand on a replacement cable just in case thats the problem..
Click to expand...
Click to collapse
its the cable.. same issue here..when I use a ps4 controller-cable i have no problem
Yea... I think it has a lot to do with the placement of the port on the phone and and a filmsy input. I tried tried a sturdier cable and it works waaaaay better.
Samsung support did offer to send me a prepaid envelope for my cable. ... then wait 2 weeks for testing... then if it was found to be defective a replacement would be shipped free of charge, but if it was defective due to user abuse then they said they'd send me a repair bill........... SERIOUSLY wtf?
I'm not kidding, this was their solution when I spoke to support.
Well it really was the cable, went out and bought a new one, exactly the same and it works fine, so the one i got in the box was faulty, after some googling it seems this has happened to a fair bit a of people already,
i still use the crappy cable to charge with... although it did stop charging half way through once :silly:
It's a USB Power setting
1. Go to Power Options on your computer
2. Click 'Change plan setting' on your chosen plan.
3. Click 'Change advanced power setting' on your chosen plan.
4. Expand 'USB Settings' .
5. Expand 'USB selective suspend setting' and change it to disabled.for On battery and Plugged In
[email protected] said:
It's a USB Power setting
1. Go to Power Options on your computer
2. Click 'Change plan setting' on your chosen plan.
3. Click 'Change advanced power setting' on your chosen plan.
4. Expand 'USB Settings' .
5. Expand 'USB selective suspend setting' and change it to disabled.for On battery and Plugged In
Click to expand...
Click to collapse
I tried this and still it doesnt work. I changed the cables , I changed the PC which I am connecting to and still no fix. I keep getting disconnected continuously.
I'm having the same problem with Galaxy S7. It keeps disconnecting data after it has been plugged in a few seconds. It's not a cable issue, I've checked on 8 different cables.
BaconMage said:
I'm having the same problem with Galaxy S7. It keeps disconnecting data after it has been plugged in a few seconds. It's not a cable issue, I've checked on 8 different cables.
Click to expand...
Click to collapse
Flash a different ROM. I had this on my s6 e+ on stock nougat. I went to Dr ketan ROM and it stopped
I heard it could be due to using a fast charging cable. The phone attempts to draw out more current than the USB port of the computer allows, forcing it to disconnect/reconnect repeatedly. Try using an older/less-current-rated cable. Alternatively, if you don't actually need to access the files and are just charging the phone, you can go to Window's Auto Play (search in start menu) and set your phone to "Take No Action"
I wanted to throw out a few other tricks to try, for whoever comes across this old thread when googling.
I don't 100% have an idea of why this happens, or why this worked, but it did.
First thing is, the cable really does matter. If you're using a cheapo cable that doesn't do fast charging, or a data-only cable, get a nice cable. If you're using a nice cable, try a non-fast-charge cable or the one that came with the phone.
My fast-charging cable has worked for a while but I recently tried to transfer a large 2 gig movie to the phone's secondary SD card, and it kept disconnecting / timing out.
What worked for me is go to developer options (google it, there's some code you have to enter to unlock these settings) and then usb debugging. It was disabled and I enabled it. The transfer then worked smoothly.
Weirdly, another transfer right after did NOT go smoothly, and the fix for me was to disable usb debugging, then enable it again. Then the file transferred normally, even though it took a few minutes.
Lastly, one file refused to transfer that was sitting in a particular folder. I'd get an error instantly. The folder was the cache folder for a popular video downloading app. Even a tiny text file from that folder, refused to copy. But files from other folders worked. I finally figured out that for whatever reason, the phone (or maybe windows) didn't like copying straight from this folder. Not sure why. Some permissions thing? Anyway - I copied the file I wanted from the cache folder, to a folder I use all the time. Then from this new folder to the phone. Worked smoothly, no error.
Hope these tricks help someone.

Chinese WinCE 6.0 car stereo switching between USB functions

Hello everyone!
I hope there isn't a topic already for this, but I searched and didn't find anything, mostly also because it's kind of difficult to describe my problem.
To begin with. I have one of those chinese car stereos that run WinCE 6 in my car. It's not the first one, I actually went through quite few of them to finally find one that suits me. I thought I did, and mostly it's true, but there is still one feature that bugs me a bit.
My stereo has two USB ports. One, mini-USB on front - for music/videos/pics, second, full size USB on the back - for 3G/WiFi adaptor. This is as described by the manufacturer/seller.
Now, obviously, many of us would think, that since it's "universal serial bus", it shouldn't matter what I put in which port. So the rear port should accept music on USB flash drive and front port should work with 3G modem. Right? Right? Wrooong!!!
For whatever reason, my stereo only accepts music in the front port, with annoying little cable that is to convert the mini-USB to full size, just bumping up and down as I drive. Also, since I have a built-in USB port, which I would like to use for this and plug it's connection to rear port on the stereo, bugs me a lot.
But no, the rear port only works with the 3G modem and seems to completely ignore any flash drive connected to it.
What's funny though is, that the front port actually works with the 3G modem too! So the front is a "2in1", but the rear is only designated for 3G/WiFi.
Since I don't want to let this just go and get used to it (+ my OCD is fighting heavilly with me on this, lol ), I started to look around to figure out what might cause this. I loaded Total Commander on the unit and plugged two flash drives to the stereo. Both with music files, both formatted the same. In totalcmd it showed them as USB (front) and USB1 (rear) (or something similar, the key part is the "1"). It always added the "1" to the rear one, even though it was connected alone, without the front one.
Now, this is where I believe the problem is. I think/hope/wish that the music application on the stereo only works when pointed to the "USB" (front) device. Since there is probably no way to decrypt and re-program the music app, I was thinking about renaming the USB connections, or, basically switching them for each other.
So to get (finally) to the bottom of my question, is there a way to switch the description/name/purpose of the USB ports in WinCE 6.0 platform, preferably of course in a way that it would stay like that even after restart?
Many many thanks for any help or pointing me to the right direction! Also please let me know if there is some detail that might help identifying the problem.
Today I installed an app called USB Device Info from the play store. What it shows is that it cannot connect because of SeLinux.. CLUE?? So I went ahead and looked on how to connect via USB with Linux. I downloaded Terminus from Play Store and was able to read the files. Previously, I read it's a 'read only' connection. I'm researching how to change the 'read only' to 'read and write', and also extract and find these files. I'm currently looking for my "extracted files".

Unable to use external DAC with S8+

I have no issue getting my Chord Mojo working with the UAPP app on my S8+ but when I try to use band camp, youtube or any other apps it will not route audio to the DAC properly. Note that UAPP uses a proprietary driver for routing data to the extetnal DAC. A notification comes up when connection Mojo to S8+ via micro usb-usb c otg cable(see screenshot below)
I have tried every option in the normal settinsg and developer mode but no matter what it just reverts back to "charge connected device". I have played around with all the USB settings in Developed mode;
Prevent automatic usb routing
Setting the usb device to audio source,
/MTP
Etc
Nothing works.
I even uninstalled UAPP, attached Mojo and opened band camp, still nothing. Worse yet, often it will freeze with Mojo connected and then restart itself or get stuck on the carrier boot screen during restart.
Seems that Android system is not allowing the device to connect properly although I can't be sure. I just want to be able to send all my audio to my exceptional Chord Mojo. Bummer because everything worked fine on S7 Edge running Android 7.0 when I selected MTP under developer options. Unless there's a fix I'll only be able to use Mojo with UAPP.
Im having very similar problem on S8, got an OPPO HA2 DAC, have bought a micro USB to USB C cable, and the phone is charging the DAC? It doesnt let me change the output as per your screen shot above.
Can anyone help?
I've ordered the meenova c to b otg cable, will report back.
i use andoird4viper with my DFR and it works. just had to lock the effect to headset and it should work system wide, as least for my case.
The meenova off cable made no difference with regard to getting Mojo to work with apps other than UAPP.
mstormer said:
i use andoird4viper with my DFR and it works. just had to lock the effect to headset and it should work system wide, as least for my case.
Click to expand...
Click to collapse
I'm not rooted and don't want to root.
Still no fix in sight but it is definitely a software issue and most likely with Android system processes.

Categories

Resources