Hello!
I have a SCH-I535PP that has a bad screen and a SPH-L710 that has a good one. I stripped them both down to the "frame" of the screen and replaced all the SPH's innards with the SCH's, besides the front facing cam because the screw is stripped out.
The problem with this is that the pcb is not meant for this "frame" and I have to leave a screw out so that it doesn't sandwich the pcb that connects the upper and lower sections of pcb, possibly un-connecting something as I screw it together. I also had to leave out the black screw as theres no hole in the SPH's frame.
So, the features I'm missing is the camera, vibration, wifi, and the home button. However I'm not sure if the home button worked on this frame so. But if that's the case (which is might be because I can't get into recovery) then I can't clear cache to see if that would fix the said hardware faults.
Worse comes to worse I just need the wifi really, but having the rest of it would be great. Any suggestions?
Thanks so much!
Sokoloft said:
Hello! I have a SCH-I535PP that has a bad screen and a SPH-L710 that has a good one. I stripped them both down to the "frame" of the screen and replaced all the SPH's innards with the SCH's, besides the front facing cam because the screw is stripped out.
Click to expand...
Click to collapse
The Digitizer Assembly is compatible between the two models but, not the specific electronic components.
That's pretty much the bottom line...
The ifixit.com website has excellent guides with images if your looking for one too.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
The Digitizer Assembly is compatible between the two models but, not the specific electronic components.
That's pretty much the bottom line...
The ifixit.com website has excellent guides with images if your looking for one too.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Great, so I have a phone that barely works. Least I got my data off it. Still though, there's got to be a way to fix it. I don't care about the vibration and home button but the wifi and the camera are crucial. I still get cell reception and bluetooth, but why don't I get wifi? Doesn't make any sense. It goes to turn on in the settings and turns off. I swapped over the antenna after using the doner phones one, is that what caused it? Using the older phones one? Or is the wifi section directly on the pcb? Maybe it got pinched somewheres or unplugged? No idea.
Thanks for the help!
Sokoloft said:
Great, so I have a phone that barely works. Least I got my data off it. Still though, there's got to be a way to fix it. I don't care about the vibration and home button but the wifi and the camera are crucial. I still get cell reception and bluetooth, but why don't I get wifi? Doesn't make any sense. It goes to turn on in the settings and turns off. I swapped over the antenna after using the doner phones one, is that what caused it? Using the older phones one? Or is the wifi section directly on the pcb? Maybe it got pinched somewheres or unplugged? No idea.Thanks for the help!
Click to expand...
Click to collapse
Maybe your Firmware Modem needs to be updated...
Just a final thought...
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
Maybe your Firmware Modem needs to be updated...
Just a final thought...
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Alrighty, good thing I have a home button emulator app and terminal emulator I can add su and reboot recovery. However I'm not sure which modem driver I should use? I have the I535PP, not sure where I'd find the file I need to flash in the samsung recovery. Also I got the phone a while ago, it has android 4.4.2. I did a factory reset when I got it, however I've been using a work around to get around the activation screen. I was told if you act like you're going to use the phone with a different sim they'll activate the phone, should I try that? Or should I try and flash a different software to it? Also I've heard of a thing called knox sensor? Will that go off and brick the phone if I try to flash a different version of w/e to it? Also I should add that the phone was rooted with kingroot.
( I've got a sdcard I'll put it onto, it's a .zip right? There anything else I should know about? )
Also, my basebrand version is: I535PPVRUBNF5
Thanks so much!
Sokoloft said:
Alrighty, good thing I have a home button emulator app and terminal emulator I can add su and reboot recovery. However I'm not sure which modem driver I should use? I have the I535PP, not sure where I'd find the file I need to flash in the samsung recovery. Also I got the phone a while ago, it has android 4.4.2. I did a factory reset when I got it, however I've been using a work around to get around the activation screen. I was told if you act like you're going to use the phone with a different sim they'll activate the phone, should I try that? Or should I try and flash a different software to it? Also I've heard of a thing called knox sensor? Will that go off and brick the phone if I try to flash a different version of w/e to it? Also I should add that the phone was rooted with kingroot.. ( I've got a sdcard I'll put it onto, it's a .zip right? There anything else I should know about? ). Also, my basebrand version is: I535PPVRUBNF5. Thanks so much!
Click to expand...
Click to collapse
I believe that the NF5 is the last one released.
I really can't give you much more information than this. I've never had the Prepaid S3.
If you need the Stock Firmware for the I535PP NF5, i do have it on my File Host Account. I uploaded it for another member a while ago and kept it there.
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
I believe that the NF5 is the last one released.
I really can't give you much more information than this. I've never had the Prepaid S3.
If you need the Stock Firmware for the I535PP NF5, i do have it on my File Host Account. I uploaded it for another member a while ago and kept it there.
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Okay? So should I make a backup and restore it with that firmware? That's basically the same as doing a factory reset right? Should I try to do a factory reset first? I'm new to all this so what should I use to backup? Just the standard android thing (if there is one). Restoring from that backup wont bring my issues back will it? Or is the whole firmware thing just essentially "drivers"? and doesn't reset the phone? I'm confused.
Also could I get the link to said firmware? Again, thanks so much!
I also found this: https://forum.xda-developers.com/ga.../rom-tw-4-4-2-i535ppvrubnf5-deodexed-t3427237
Seems to be a modified version of the OS/firmware. Idk if it'll work for my phone though. I need a modified loader or something? Any suggestions?
Sokoloft said:
Okay? So should I make a backup and restore it with that firmware? That's basically the same as doing a factory reset right? Should I try to do a factory reset first? I'm new to all this so what should I use to backup? Just the standard android thing (if there is one). Restoring from that backup wont bring my issues back will it? Or is the whole firmware thing just essentially "drivers"? and doesn't reset the phone? I'm confused. Also could I get the link to said firmware? Again, thanks so much! I also found this: https://forum.xda-developers.com/ga.../rom-tw-4-4-2-i535ppvrubnf5-deodexed-t3427237 Seems to be a modified version of the OS/firmware. Idk if it'll work for my phone though. I need a modified loader or something? Any suggestions?
Click to expand...
Click to collapse
First of all, here's the link for the stock Firmware (it's zipped up so all you need to do is unzip it).
https://www.androidfilehost.com/?fid=745425885120750115
That other link is a modified stock Firmware. It's basically the stock Firmware that's debloated and other modifications that's outlined by the developer.
Since the device cannot be unlocked for a custom firmware, that is basically the stock Firmware that's modified and only has what's needed for the devices recovery to think it's the real deal.
I have an S4 that can't be unlocked but, it's got the stang5litre firmware that's modified the same way.
I hope i explained it okay via text...
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
First of all, here's the link for the stock Firmware (it's zipped up so all you need to do is unzip it).
https://www.androidfilehost.com/?fid=745425885120750115
That other link is a modified stock Firmware. It's basically the stock Firmware that's debloated and other modifications that's outlined by the developer.
Since the device cannot be unlocked for a custom firmware, that is basically the stock Firmware that's modified and only has what's needed for the devices recovery to think it's the real deal.
I have an S4 that can't be unlocked but, it's got the stang5litre firmware that's modified the same way.
I hope i explained it okay via text...
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Well with you saying it's not unlocked, when I first boot the phone it says custom with an unlock padlock? Is that what you mean? So am I set to try and flash that de-bloated version and try it out? It says there that I need safestrap. No idea what that is but I looked into it some, should I try and use it to flash that version or use the standard samsung recovery? Or will it not work that way, probably not.
Also the link you sent me I got a "504 Gateway Time-out"
EDIT: I rooted it with kingroot and I'm fairly certain that it made the custom bit appear. Did it disable the knox sensor or something, and make it to where I can flash custom roms or w/e?
EDIT2: The site was temp down, got it now.
Alright, I downloaded the file you sent me. Going to copy it to my sdcard. Is there something specific I should name the file? Also I want to extract it so it's .MD5 not .zip like you said? Also what option do I select in the recovery mode? Apply update from external storage?
Thanks so much!
Well I can't even connect my device to my PC. It wont show up. I had this problem before and I can't remember what I did to fix it... Keeps showing up as a modem. I've installed the correct drivers though. wtf... Then tried samsung keis, didn't work. Tried samsung smart switch which said my device was supported but when I went to connect it, it decided it wasn't..... I'm trying USB driver version 1.5.14.0, but when I connect my device windows update installs more ****. Is that the problem? It keeps installing the wrong driver? Idfk starting to get annoyed now lol, going to take a break from it and see what you say tomorrow.
(it's not the cable either, I'm using the data/charge cable from my logitech g700s)
Thanks again.
Edit: I'm on windows 7 x64, and in the devices menu it's showing as a modem.
I've been looking into it a little more. I found a loader called TWRP. However I can't find the specific I535PP version, again, or is it this one?
https://twrp.me/samsung/samsunggalaxys3verizon.html
So if I installed that, I should be able to install that custom rom? A de-bloated version would be great, it runs a little slow, and gets pretty hot playing games. Plus a little change too, but I still need to backup all my data and some game saves. I just need to be able to access it from my pc >_< I've format'd my pc since I had it working last
Edit: The rom install instructions say to use either safestrap or flashfire. I'm not sure which one to use, or if I should try to use the TWRP. Or if I should try neither of them because I might brick my device? Idk, can't wait to hear from you. Or should I just forget about all this and try and flash the original firmware you sent me?
Edit2: I also made a thread here asking the same questions.
Thanks!
Unfortunately I still can't get it to connect to my pc. There's a bunch of other threads I've looked at but trying different things haven't made it work.
Any suggestions?
Thanks.
wtf, even booting into download mode does nothing when plugging it to my pc. I have no idea what's up with this phone... It says the following up at the top left:
ODIN MODE
PRODUCT NAME: SCH-I535PP
CURRENT BINARY: Samsung Official
QUALCOMM SECUREBOOT: ENABLE
BOOTLOADER RP SWREV: 2
It's also stuck in download mode now, and just says "Downloading... Do not turn off target !!" Wtf is it downloading???
It's great that I have an overcomplicated flash light essentially, or if I restart the device possibly a paper-weight. I'll give it a little longer and see if it'll shut off by the button, if not I'll pull the battery.
Edit: It was fine, but still an overcomplicated flashlight. I guess you normally get out of DL mode by holding home which doesn't work for me, but removing the battery was fine.
Another unfortunate thing is that I can't enable mtp mode because of the weird way I have to get into the phone. My notification bar doesn't exist at the top, when I was first using the phone it would randomly pop up and work out of the blue, but if I restarted the phone or hit the home button it would send me back the activation screen, therefore having me to go into settings and enable standard home screen mode and a couple seconds later it pops to the home screen or lock screen if I don't type my code.
Any idea what the number is I have to dial specifically for the I535PP? By VZW? I've tried them all
Hope you haven't forgotten about me @Ibuprophen xD Sorry for all the questions.
Thanks and look forward to hearing from you!
Also I just found this video
https://youtu.be/9LLOmoE-tp0
So from what this vid says do I just click AP on odin while my phones in download mode, click the file you sent me and let it go? I don't think the same would apply to the other flash install, as it isn't compiled into a .md5 format.
But again I still haven't been able to back some files up off my phone. Only if my pc had bluetooth, because that surprisingly works on the phone. Might just get a usb bluetooth adapter if I have to... So annoying, idk what I did last time to fix it...
I really do apologize @Sokoloft for not responding to you lately...
I've just been getting a bit swamped with various items regarding my current developments, unreleased developments, various other XDA responsibilities and my personal responsibilities at home.
After a quick review of your posts here, i am not sure exactly where you are at now and even what your trying to do now exactly.
I did notice a question or two on other posts and, though their not bad questions in itself but, they are actually reflecting (to myself and others) that your not really reading the OP's nor are even searching the threads themselves for previously answered questions from other members that match/are similar to your question.
I'm not trying to nor is it my place to lecture any member but, I'm just providing you with a reflection of what I, personally, am viewing/understanding.
I just want to quickly add that if you're that lost in what you're doing, i can only recommend/suggest (in a friendly way) to do your homework by looking into and understanding what you want to do, is it possible to do and how those actions affect your device.
With that stated...
I just want to remind you of 2 things that I've stated on a previous post(s).
1) I don't have/never had the Prepaid S3.
2) There's no way to unlock the bootloader of your specific prepaid device.
The post regarding that customized version of the stock ROM is a good alternative as well as (i think it's available for the S3 Prepaid) the stang5litre that's also a customized version of the stock ROM.
If you can respond to my other questions (above), I'll try to provide you with some help the best way i can.
Thank you very much for your time, patience and understanding with this!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
I really do apologize @Sokoloft for not responding to you lately...
I've just been getting a bit swamped with various items regarding my current developments, unreleased developments, various other XDA responsibilities and my personal responsibilities at home.
After a quick review of your posts here, i am not sure exactly where you are at now and even what your trying to do now exactly.
I did notice a question or two on other posts and, though their not bad questions in itself but, they are actually reflecting (to myself and others) that your not really reading the OP's nor are even searching the threads themselves for previously answered questions from other members that match/are similar to your question.
I'm not trying to nor is it my place to lecture any member but, I'm just providing you with a reflection of what I, personally, am viewing/understanding.
I just want to quickly add that if you're that lost in what you're doing, i can only recommend/suggest (in a friendly way) to do your homework by looking into and understanding what you want to do, is it possible to do and how those actions affect your device.
With that stated...
I just want to remind you of 2 things that I've stated on a previous post(s).
1) I don't have/never had the Prepaid S3.
2) There's no way to unlock the bootloader of your specific prepaid device.
The post regarding that customized version of the stock ROM is a good alternative as well as (i think it's available for the S3 Prepaid) the stang5litre that's also a customized version of the stock ROM.
If you can respond to my other questions (above), I'll try to provide you with some help the best way i can.
Thank you very much for your time, patience and understanding with this!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Okay, so where I am at is that I cannot connect the phone to my pc. It registers itself as a modem still no matter what driver I've tried. I can't transfer files from it that I need, plus I can't get that md5 file on the sdcard if that's what I have to do to flash the file you sent me. Or do I have to use ODIN? Regardless I'm not even sure if ODIN recognizes the device. At one point when I had tried samsung keis it almost established connection with the software, but nothing in windows explorer.
I'll get back to you more on this later tonight.
Thanks again.
EDIT: I had this problem when I initially got the damn phone, and I can't remember wtf I did to fix it. This is immensely frustrating...
EDIT2: I also need the number to dial for VZW I535PP to enable MTP mode as I can't get to my notification bar. That might help? Every one that I've tried doesn't go into that menu. Could it be because my phone isn't activated?
Essentially @Ibuprophen once I can connect to the device I'm going to back some game data up and some photo's and then flash the file you sent to me. Do I use ODIN to do that or put it on my sdcard and use the standard recovery? Or can I not because I have a locked boot-loader? Or can I because it's modified to look like the original? I'm confused...
Currently contacted samsung support, I'll see what they say about it not connecting. This is crazy though, it should just plug up and work without all this bs.
Thanks again, hope to hear from you soon.
I haven't forgotten about you @Sokoloft...
I plan to provide you with a brief tutorial on restoring the Stock Firmware using Odin for your device.
In the meantime, i just uploaded the Stock PIT files for your device. PIT is short for "Partition Information Table" and is used with the firmware file in Odin to tell it how and where to re-partition the internal memory for the factory firmware installation. The PIT file isn't typically needed but, in some cases, it is needed.
The following link is to the PIT files but, be sure to grab the one that matches the amount of internal memory of your device.
The Verizon Samsung Galaxy S3 Prepaid devices were released with 16, 32 & 64 GB of internal memory.
https://www.androidfilehost.com/?w=files&flid=225361
I'll be back with some more information for you.
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hi All,
I was going to refresh my Note pro 12.2 SM-P900 unit but things have gone awry. I was installing version TWRP boot-loader/recovery to then upgrade to lineage.
The TWRP recovery load via Odin completed but the install didn't mesh.
The device is now determined to stay turned on at the black and white Samsung loading page with RECOVERY IS NOT SEANDROID ENFORCING in hurtful red letters.
I can get to the "this is dangerous, press vol down page" but if I click down (or up) it restarts. If I try to go straight into download mode it just restarts as well.
Obviously cant take out the battery (currently letting it run down and see if that helps). I've read a number of guides on the various home, volume and power combinations and have done this on numerous devices before but this is the first time I've really managed to mess things up but statistically after the number of times I've don't this stuff it was going to go wrong eventually. If I could get it into download i'd be able to re flash a recovery and I'm sure all would be well but that doesn't seem like an option!
I think this may be the end of the line for it, but any and all suggestions welcome at this point.
PM
PlasticMonster said:
Hi All, I was going to refresh my Note pro 12.2 SM-P900 unit but things have gone awry. I was installing version TWRP boot-loader/recovery to then upgrade to lineage...
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Official TWRP thread for your device.
https://forum.xda-developers.com/showthread.php?t=2706982
I believe that one or more of the following threads may also be helpful for what you need.
https://forum.xda-developers.com/showthread.php?t=3154362
https://forum.xda-developers.com/showthread.php?t=3568690
https://forum.xda-developers.com/showthread.php?t=3550359
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Ibuprophen said:
I don't have this device but, your best bet is to post this question within the following Official TWRP thread for your device.
https://forum.xda-developers.com/showthread.php?t=2706982
I believe that one or more of the following threads may also be helpful for what you need.
https://forum.xda-developers.com/showthread.php?t=3154362
https://forum.xda-developers.com/showthread.php?t=3568690
https://forum.xda-developers.com/showthread.php?t=3550359
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thankyou Ibuprophen,
Appreciate you taking the time to call these out.
The boot loop resolved when I allowed it to fully power down and then recharged and followed the instructions again.
Just in case anyone else runs into this, take time, have a up of tea, let it drain and die. Then follow the instructions called out above.
PM