I have an j500fn j5 full bricked, no download mode no recovery, the computer detects it as qdloader 9008, I already tried some tools, and people who link guides with the request to access the recovery with a full brick is very nice, I have already tried on google and other forums but apparently no one has had this problem with this modelI i would like to know if there is any way to solve...
did you have any luck? I have the same phone and exactly the same problem...
Related
Hey guys. can i have some kind of feed back from the people who know about this problem . i have rooted galaxy tab 2 10.1 att 3g +wifi . everything was working jus fine until i flashed recovery switcher from here: http://forum.xda-developers.com/showthread.php?t=2676180 . after i installed it i then tried to flash the TWRP recovery . when aked to reboot my tab never came back on instead my computer recognize my tab as Qualcomm HS-USB QDLoader 9008 (COM7) . I cant get Download mode neither Recovery mode its like completely dead now.
here are some info of my tab:
SGH-497 At&t
4.1.2 JB
CWM recovery v6.0.2.3
Your tab is not listed in this link , you goofed up, better start writing to Santa for a new tablet .
Your tab is not a P5113, two different tabs. 10" yes, but different ROMs and operating systems. Its like flashing a Samsung phone with a Motorola ROM, all you get is a brick.
That's why you have to read op's carefully.
Pp.
Yes, like @PanchoPlanet told: AT&T have different hardware, seems like a hardbrick.
If you can't get into downloadmode nobody can't help, you need to send it to repair center.
Send from OnePlus One using Tapatalk
So this isn't something I can fix on my own ? This is the first time I screw up my device. There is noway possible for me to get Odin to recognize it ? Not sure if there is anyone in my country that can fix this :/
Probably cheaper to purchase a new tablet. ( and leave it stock ) .
Sorry about your lose. ?
Pp.
mkeeoma said:
So this isn't something I can fix on my own ? This is the first time I screw up my device. There is noway possible for me to get Odin to recognize it ? Not sure if there is anyone in my country that can fix this :/
Click to expand...
Click to collapse
Nope you can't fix it on your own. There are several variants of the Galaxy Tab 2. Wifi only which is 5113, 5110 and 5100 the latter two are different in that the 5100 has a modem like a phone and the 5110 is like the WiFi only but it doesn't have an IR(infrared) similar to a TV remote.
Flashing the wrong firmware for your device in most cases makes it unusable and an expensive brick. In some cases you can possibly find a jtag service which gives you the option of someone else reverting the bootloader back to a working version, it's a repair service in which they have to go into the device and manually edit the motherboard. Sadly this service is not available for all devices, your better off getting another one at this point
From my CM11 S3
My device had not start at all. it is Samsung Galaxy Grand Prime sm-g530 made by samsung in vietnam.
when i connect it to pc it shows MT65xx Preloader in device manager for a moment and get restart several times.
i dont know it is hard brick or soft brick.
please help.!!
did u get rid out of this??
I think u should try to flash it with sp flash tool. ask someone for the stock rom.
even if u got this then kindly share with us also.
Hi all,
I'm not new in XDA but i'm new in Samsung and yesterday i bricked my device. i own a Samsung Galaxy S8+ G955F
What i did was, first ticked OEM Unlock and USB Debugging in Developer options and then flashed the original TWRP recovery for Galaxy S8+.
After reboot the phone bootloop, i only can go to Download Mode and after that i trigger the Knox too.
If i try to flash an original Samsung rom i solve the problem?
Any help please?
Thx.
Solved by flashing a stock rom.
Sent from my Samsung Galaxy S8+ using XDA Labs
Reflash stock recovery.
Jtag dead phone to life and rewrite IMEI
First of all my phone is the s8+ G955fd, but I am sure that the people that helped me can help most Samsung owners with bricked phones.
My phone ended up being stuck on the first boot screen, I couldn't get into recovery or download mode. I installed TWRP and after that I lost my IMEI numbers( dual sim), so I tried to reflash stock and thats when i became bricked. I searched someone to help and found reference to the Fonefunshop in England. I sent it there and they said that the eMMC chip was bad. I searched for someone who could write to it or put a new one on the motherboard . I found A2Z cellular in Ottawa Canada. They used jtag to restore it to stock and they told me that the Fonefunshop had not opened the phone which is necessary to use jtag as they claimed, so avoid them.
The phone was now back doing everything it should except the IMEI's were null like before. I gave them the original IMEI's and the phone is working like new.
If your Samsung is bricked these guys can probably fix it and it won't cost much to find out.
PLEASE HELP!!!!!!!!!!!
I tried flashing TWRP Recovery 3.3.1-0 on Galaxy Tab A 10.1 LTE (2016) via Odin and when i tried to load into TWRP in just goes to the custom download mode without showing twrp, on top of all of this my tablet is now soft bricked and i can only access the download mode.
please help me...WHAT CAN I DO?????????????
JimJimJim22 said:
PLEASE HELP!!!!!!!!!!!
I tried flashing TWRP Recovery 3.3.1-0 on Galaxy Tab A 10.1 LTE (2016) via Odin and when i tried to load into TWRP in just goes to the custom download mode without showing twrp, on top of all of this my tablet is now soft bricked and i can only access the download mode.
please help me...WHAT CAN I DO?????????????
Click to expand...
Click to collapse
You need to find that devices forum and post there. This is for s8 plus only
As the title says i brick my phone samsung j7pro (sm-j730g/ds).. i tried rooting my phone
but i followed the wrong guide(stupid me) its for nougat and not for oreo8.1(my phone) and
when i restarted it (like on the video guide) im stuck in logo screen with “only official binaries can be flashed”.
And the worst is that when it restarted after i rooted it, it locked the USB DEBUGGING & OEM again.
-I tried flashing stock ROM using odin3 but it always fails..
-i tried samsung smart switch but it says "unsupported device"
Hope someone can help me.. or give me links to similar case coz i cant seem to find one..
smart switch
MrEckz said:
As the title says i soft brick my phone samsung j7pro sm-j730g/ds.. i tried rooting my phone and then when it restarted im stuck in logo screen with “only official binaries can be flashed”. And the worst is that when it restarted after i rooted it, it locked the USB DEBUGGING & OEM again.
I tried flashing stock ROM using odin3 but it always fails..
So now im stucked at logo screen.. i cant access my phone to unlock oem and usb debugging coz it wont reboot.. i can only go to download mode but i dont know what to do next..
Hope someone can help me.. or give me links to similar case coz i cant seem to find one..
Click to expand...
Click to collapse
you can try emergency recovery on smart switch on your PC !
peter couniaz said:
you can try emergency recovery on smart switch on your PC !
Click to expand...
Click to collapse
I already tried that but it says “unsupported device”
Any other way to fix my phone?
So i tired installing twrp on my old phone but i didn't use odin i used some app i found and it bricked it,i tried using odin to fix it but i don't know how to do it,i am following tutorials on YouTibe but still can't do it.If someone knows how to help me please give me advice.
Quite honestly, odin is the only one to use for samsung device in terms of firmware and recovery flashing so sadly unless if it's only soft bricked, a hard bricked device won't do you any good sadly and there is no way to unbrick a hard brick device that I am aware of....