Database Info

How do you upgrade to a newer OOS version with official TWRP

Hey guys,
I'm not sure if any one of you have tried doing this without getting a PC involved. Since there is no recovery partition and recovery is part of the boot partition. How would you go about upgrading to a newer version.
Would you flash the full OOS zip(Let's say the 5.1.8) through TWRP and then you would patch the boot image through TWRP without booting back into system.
Or would you go about upgrading through the settings->updates->upgrade, reboot to system, reboot to fastboot and go through the TWRP flashing again by booting the twrp and then patching the system with twrp?

There are several threads here explaining these questions...
With PC:
Update via settings. Then directly reboot to fastboot to boot twrp. There flash twrp.zip and magisk.zip. Reboot system.
OR
Without PC:
Update via twrp then directly flash twrp.zip. Reboot to twrp (the installed one then gets loaded) and flash magisk. Reboot system.
It's up to you what option you choose.

pdppdp said:
There are several threads here explaining these questions...
With PC:
Update via settings. Then directly reboot to fastboot to boot twrp. There flash twrp.zip and magisk.zip. Reboot system.
OR
Without PC:
Update via twrp then directly flash twrp.zip. Reboot to twrp (the installed one then gets loaded) and flash magisk. Reboot system.
It's up to you what option you choose.
Click to expand...
Click to collapse
So correct me if i was wrong i have to download full rom package and then i have to flash it via twrp and flash twrp installer zip(not the twrp image) then flash magisk and reboot so is this process correct and also will i loose data like photos on internal storage apps i have downloaded it will help me great if you reply to this iam planning to update to 5.1.8 from 5.1.6

Yes almost. After rom installation you flash twrp.zip and reboot recovery and then magisk.
I did it that way some hours ago and did not loose data.
Sorry: had to edit 2 times.

1) download full zip (with oxygen updater or here on the dedicated section)
2) flash via twrp (wait and don't panic it takes some time)
3) instantly flash twrp.zip
4) reboot to recovery for auto switching slot
5) flash magisk
6) reboot to system
7) you're updated/rooted with twrp

Hitman478™ said:
1) download full zip (with oxygen updater or here on the dedicated section)
2) flash via twrp (wait and don't panic it takes some time)
3) instantly flash twrp.zip
4) reboot to recovery for auto switching slot
5) flash magisk
6) reboot to system
7) you're updated/rooted with twrp
Click to expand...
Click to collapse
Thank you
---------- Post added at 01:14 PM ---------- Previous post was at 01:13 PM ----------
pdppdp said:
Yes almost. After rom installation you flash twrp.zip and reboot recovery and then magisk.
I did it that way some hours ago and did not loose data.
Sorry: had to edit 2 times.
Click to expand...
Click to collapse
Thank you

Hitman478™ said:
1) download full zip (with oxygen updater or here on the dedicated section)
2) flash via twrp (wait and don't panic it takes some time)
3) instantly flash twrp.zip
4) reboot to recovery for auto switching slot
5) flash magisk
6) reboot to system
7) you're updated/rooted with twrp
Click to expand...
Click to collapse
Worked perfectly for me. Thanks!

ahamling27 said:
Worked perfectly for me. Thanks!
Click to expand...
Click to collapse
Here to thanks :good:

Unable to flash TWRP. Lost Recovery, OS and only have unlocked bootloader.

Hi,
I was on Oxygen OS 10.0.0. Rooted with twrp-3.3.1-4-enchilada and magisk 20.1. (I had used this guide to do it. https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213) Today I downloaded the zip for 10.0.1 from the Oxygen Updater app and tried to flash it like I have done for OOS 9 in the past as usual. I went to recovery (I did not backup), I just wiped my data (not internal storage), cache and system. After that I tried to install the new zip but I got an error. It just said error unable to install. Didn't mention why. I tried flashing the older OOS 10 zip and got the same error.
So I thought I will try flashing on the other slot. I was on slot B. I switched to slot A and got the same error.
So I thought I will try to sideload. When I tried that I got the same error. So I thought I will try to reflash the twrp img itself. I went to fastboot mode and tried runnning this command
fastboot boot twrp-3.3.1-14-enchilada-Q-mauronofrio.img
It showed me this error
Sending 'boot.img' (65536 KB) OKAY [ 1.609s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Now I don't have any recovery at all. I have just the unlocked bootloader and no OS nor recovery. What can I do to flash TWRP again and install either OOS 10.0.1 zip or 10.0.0 zip? Any help will be great.
Thanks

Arnavzz said:
Hi,
I was on Oxygen OS 10.0.0. Rooted with twrp-3.3.1-4-enchilada and magisk 20.1. (I had used this guide to do it. https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213) Today I downloaded the zip for 10.0.1 from the Oxygen Updater app and tried to flash it like I have done for OOS 9 in the past as usual. I went to recovery (I did not backup), I just wiped my data (not internal storage), cache and system. After that I tried to install the new zip but I got an error. It just said error unable to install. Didn't mention why. I tried flashing the older OOS 10 zip and got the same error.
So I thought I will try flashing on the other slot. I was on slot B. I switched to slot A and got the same error.
So I thought I will try to sideload. When I tried that I got the same error. So I thought I will try to reflash the twrp img itself. I went to fastboot mode and tried runnning this command
fastboot boot twrp-3.3.1-14-enchilada-Q-mauronofrio.img
It showed me this error
Sending 'boot.img' (65536 KB) OKAY [ 1.609s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Now I don't have any recovery at all. I have just the unlocked bootloader and no OS nor recovery. What can I do to flash TWRP again and install either OOS 10.0.1 zip or 10.0.0 zip? Any help will be great.
Thanks
Click to expand...
Click to collapse
So basically what happened there is TWRP doesn't boot with the oxygenos 10 bootloader. You will need to use the MSM download tool to unbrick your device.
Sent from my ONEPLUS A6003 using Tapatalk

Kaleshwar said:
So basically what happened there is TWRP doesn't boot with the oxygenos 10 bootloader. You will need to use the MSM download tool to unbrick your device.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
But how is that? I was on stable OOS 10 before rooting following this link https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213. As per this, the first step is to flash twrp and that image did flash back when I did it. Any idea why it doesn't work now?
Also, do you have any links for the MSM download tool and any guide if there is?
Thanks

Arnavzz said:
But how is that? I was on stable OOS 10 before rooting following this link https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213. As per this, the first step is to flash twrp and that image did flash back when I did it. Any idea why it doesn't work now?
Also, do you have any links for the MSM download tool and any guide if there is?
Thanks
Click to expand...
Click to collapse
The problem isn't TWRP it's the bootloader. That's all I know. And for the MSM download tool. See attached link below.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Sent from my ONEPLUS A6003 using Tapatalk

Do not boot the twrp from fastboot it won't work
Just do
Fastboot flash boot twrp.img
Then reboot the device to twrp it will boot to trwp and then flash the new a10 zip and immediately afterwards flash the twrp zip

chintu1234 said:
Do not boot the twrp from fastboot it won't work
Just do
Fastboot flash boot twrp.img
Then reboot the device to twrp it will boot to trwp and then flash the new a10 zip and immediately afterwards flash the twrp zip
Click to expand...
Click to collapse
This doesn't work. It flashes successfully but when I select Reboot Recovery and press the power button, it boots back to the bootloader.

Maybe wrong twrp img
Try the older 3.3.1-12 twrp.img and then try
Also try the following as well
Fastboot flash boot_a twrp.img
Fastboot flash boot_b twrp.img
And try just reboot not reboot to recovery

Kaleshwar said:
The problem isn't TWRP it's the bootloader. That's all I know. And for the MSM download tool. See attached link below.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Thanks so much for that! I have been able to recover the phone using MSM download tool. Now will update to 10 using the phones OTA.
However, I have one question, if I update to OOS 10.0.1, do you think this original post on rooting OOS 10, will work for it? https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213 Or do you suggest to not root and wait?

Arnavzz said:
Thanks so much for that! I have been able to recover the phone using MSM download tool. Now will update to 10 using the phones OTA.
However, I have one question, if I update to OOS 10.0.1, do you think this original post on rooting OOS 10, will work for it? https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213 Or do you suggest to not root and wait?
Click to expand...
Click to collapse
You can try it . Looks pretty solid.
Sent from my ONEPLUS A6003 using Tapatalk

Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules first to avoid issues (in TWRP if you cannot boot to system. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242)
Update through local update to 10.3.2 is what I prefer to do. Then I do the following.
Reboot to let phone finish whatever. reboot into bootloader.
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img - ( https://sourceforge.net/projects/ma...3.3.1-18-enchilada-Q-mauronofrio.img/download )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3.2 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP (https://sourceforge.net/projects/ma...-enchilada-installer-mauronofrio.zip/download ) or Blu zip (https://github.com/engstk/android_device_oneplus_enchilada/releases)
5. Reboot to recovery
6. Flash Magisk 20.3 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://mega.nz/#!PO5x1bYA!dKq3pbxUdpb16zhuqM_idqvWNLnsu4Ky4IAmYQiQUDw
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853

I had similar situation last evening.
I made the mistake of having a factory reset on rooted 9.0.8 and then trying to flash the 10.0.1
I got the same error, so I had to connect my mobile to my laptop, fastboot to the newest TWRP, flash the TWRP, flash the 9.0.9, flash the 10.0.1, flash magisk 20.x and then everything was working.

xpakage said:
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules
Update through local update 10.3 or current ROM
Reboot
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img - ( https://androidfilehost.com/?fid=4349826312261678088 )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP ( https://androidfilehost.com/?fid=4349826312261678087 ) or Blu zip (https://github.com/engstk/op6/releases/download/r112/blu_spark_r112-oos_op6-op6t_0dd5f9228.zip)
5. Reboot to recovery
6. Flash Magisk 20.1 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://drive.google.com/file/d/1w44cUg815g-H1h_6gObUVPLDTc_dtiMX/view
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Click to expand...
Click to collapse
This worked for me.. Finally. PS - I did in a slightly different order. I installed twrp first, booted into twrp, made sure I was in slot A. If I wasnt, I rebooted to recovery. If I still wasnt I set slot to A manually then rebooted to recovery again. Flashed the stock boot img you linked to boot, then rebooted to recovery slot b (same process I did to get to slot a) then flashed the stock boot img to boot again THEN finally installed magisk. Booted to system, where it hanged a bit, rebooted before getting into android, but booted in just fine after that..
For some reason if you don't flash stock img to slot A (and maybe slot B too, I did this for good measure) before installing magisk everything dies a horrible death and breaks, which can't even be recovered from /boot /system backups..
EDIT: Tried to reboot into recovery, which reverted back to stock for some reason after doing the above steps. So I proceeded to install the bluspark recovery, rebooted into recovery, made sure I was in slot b, made a back up of the boot image, then flashed bluspark kernel. Got stuck at the unlocked bootloader screen. Rebooted into recovery, restored my /boot back. Still stuck when I try to boot into system. Fixed it by booting back into recovery in slot A flashing stock boot img, then into slot b stock boot, then magisk, but also installed bluspark kernel here because I had a feeling I would lose twrp from flashing to stock boot img, and that the issue was caused by twrp (both twrp-3.3.1-16-enchilada-installer-mauronofrio and twrp-3.3.1-x_blu_spark_v9.108_op6 have this issue). Guess what? Turns out I was right. Having twrp breaks everything after you install magisk, so you need to flash the stock boot img before flashing magisk for some reason.. and cant install twrp again unless you dont mind bricking your phone.
EDIT2: F2FS works, just boot into recovery via fastboot (this should be slot b), change /data to f2fs, boot back into fastboot then into recovery again by fastboot (slot b again), flash stock boot img > magisk > bluspark kernel > f2fs_fstab.zip > f2fs_optimize.zip > factory reset/wipe (from twrp before rebooting), done just reboot into system. You of course lose twrp because magisk doesnt like twrp on oos 10.x for some reason, and will need to set everything up again to cause of the wipe. If you dont factory reset/wipe from twrp before booting into system your system will crash and reboot every time you boot into android, then have to do all the steps I listed again.
EDIT3: Never mind, I was wrong, f2fs makes almost all your apps and storage unusable. Not sure if it's cause of the rom (OOS10.3.0) or because we have to flash stock boot.img and get rid of twrp before booting into system. Either way, f2fs has never really been stable or fun to get working so better to stick to ext4.. that few percent performance boost isnt worth it.
EDIT4: This is my last update. After experimenting with different things, bricking my phone, restoring it via fastboot rom, many many times, I've verified the simplest and cleanest way to install magisk.. Do note you wont be able to keep twrp.
Method A - If you already have twrp
Boot recovery into slot a, flash your rom's stock boot.img, then boot into your recovery in slot b (dont boot into slot a recovery because slot a wont have twrp anymore), flash your rom's stock boot.img, magisk and (optional) your kernel of choice (or not) in that order, then you can boot boot into system. That's it.
Method B - If you don't have twrp
Boot into fastboot, and from your cmd/terminal run fastboot flash boot yourtwrp.img (I suggest Mauronofrio's twrp-3.3.1-16-enchilada-Q-mauronofrio.img or newer). Use your volume buttons to select boot into recovery. Make sure your active slot is B, (if it isnt, install twrp (bluspark and Mauronofrio's twrp both work great) by zip, then follow the steps above in method A). Once you've verified you're in slot B flash your rom's stock boot.img, magisk and (optional) your kernel of choice (or not) in that order, then you can boot into system. That's it.
Maybe @mauronofrio or @eng.stk can verify why magisk or twrp bricks the system when you install them together on OOS 10.

not working
sir i follow your steps but phone is stuck on boot i have official version a10 10.3.0 update on 25.12.19
pls tell me how i get root access....

gauravkapoor99150 said:
sir i follow your steps but phone is stuck on boot i have official version a10 10.3.0 update on 25.12.19
pls tell me how i get root access....
Click to expand...
Click to collapse
U need to flash the magisk v22 zip file through the .108 TWRP recovery
Sent from my ONEPLUS A6003 using Tapatalk

RASTAVIPER said:
U need to flash the magisk v22 zip file through the .108 TWRP recovery
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
sir can you send me a link

lemon07r said:
Maybe @mauronofrio or @eng.stk can verify why magisk or twrp bricks the system when you install them together on OOS 10.
Click to expand...
Click to collapse
@mauronofrio wrote the following in his TWRP thread a while ago:
So little update, after some tests i'm sure there is a compatibility problem between twrp and magisk, i was able to get only one of them, so actually i don't know how to proceed, i need to understand if it is a twrp problem or a magisk problem, TWRP is in stand-by for now.
There are not problems on Android Pie, if you need of the twrp on android Q just flash in boot partition the Q .img (fastboot flash boot twrp.img) and then reboot from fastboot in recovery. Before publishing the twrp I had not tested magisk and twrp together.
On Android 10 use only magisk 19.4
Click to expand...
Click to collapse

xpakage said:
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules first to avoid issues (in TWRP if you cannot boot to system. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242)
Update through local update to 10.3.2 is what I prefer to do. Then I do the following.
Reboot to let phone finish whatever. reboot into bootloader.
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img - ( https://sourceforge.net/projects/ma...3.3.1-18-enchilada-Q-mauronofrio.img/download )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3.2 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP (https://sourceforge.net/projects/ma...-enchilada-installer-mauronofrio.zip/download ) or Blu zip (https://github.com/engstk/android_device_oneplus_enchilada/releases)
5. Reboot to recovery
6. Flash Magisk 20.3 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://mega.nz/#!PO5x1bYA!dKq3pbxUdpb16zhuqM_idqvWNLnsu4Ky4IAmYQiQUDw
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Click to expand...
Click to collapse
Basically worked for me, too, with 2 exceptions:
- this tool to remove magisk modules etc. wouldn't be flashed, always ended in an unnamed error; probably the cause for some other problems?
- flashing boot.img (V 10.3.4 from this thread) didn't work for me, I always ended up in twrp's splash screen
- got it solved by dirty flashing the full V 10.3.4 ROM (again from the above thread)
Many thanks once again!

[UNOFFICIAL] [RECOVERY] [OnePlus 7 Pro] OrangeFox Recovery Project [R10.1]

[Deleted]

The flashing instruction makes no sense to me

Spookybear said:
INSTALLATION:
0. Backup your ROM, your data, your internal storage, and your settings/apps, to an external device
1. Reboot to your custom TWRP-based Recovery
2. The device will automatically reboot into OrangeFox recovery after installation (allow this to happen)
3. Enjoy!
(Note: There is no zip file because this recovery is too big to fit in the ramdisk.
Click to expand...
Click to collapse
Can you please clarify this?
I assume install .IMG to Ramdisk? It will likely come up, so just want to cover all bases.

gorilla p said:
Can you please clarify this?
I assume install .IMG to Ramdisk? It will likely come up, so just want to cover all bases.
Click to expand...
Click to collapse
I tried that...no dice...
Flash to both _a and _b using trwp but recovery does not boot... so back to trwp til some future info...

I flashed via TWRP, via flash .img to ramdisk, rebooted to recovery and nothing.
Stuck at "Bootloader unlocked" screen

Tried to boot via fastboot and it failed.

Was this recovery tested on the OP7 Pro? If so, what ROM was being used and what was the flashing process?

Gungrave223 said:
The flashing instruction makes no sense to me
Click to expand...
Click to collapse
Sorry, fixed the instructions.

avid_droid said:
Yeah directions are honestly the worst I've seen on XDA yet.
Click to expand...
Click to collapse
Sorry, fixed the instructions.

I have a feeling these new instructions aren't going to work either, considering we don't have a recovery partition.

Spookybear said:
Sorry, fixed the instructions.
Click to expand...
Click to collapse
still no dice
HTML:
Writing 'recovery'
FAILED (remote: '(recovery_a)
No such partition'

I guess the command should be
fastboot boot /path to recovery
But again this wont flash recovery permanently AFAIK, everytime we need to boot into recovery we have to flash it via fastboot

insaneparnoid said:
I guess the command should be
fastboot boot /path to recovery
But again this wont flash recovery permanently AFAIK, everytime we need to boot into recovery we have to flash it via fastboot
Click to expand...
Click to collapse
He updated it with fastboot flash, indicating that this is to be installed, however it doesn't appear to work at all at this point.

For me is working , latest OOS beta. Just had to disable vbmeta in order to boot.

we need a flashble zip for this.

is OTG working with OrangeFox ?

otakutw said:
we need a flashble zip for this.
Click to expand...
Click to collapse
Not exactly, try - fastboot flash recovery *drag the image into the cmd then press enter*

Can this recovery be decreased in size so that it can be flashed to the ramdisk?
EDIT: It seems twrp is even bigger than this. Twrp img is 30.7mb while this is 29.4mb. Twrp does flash to the ramdisk. If this could be permanently flashed, it would be perfect. If the size needs to be decreased, certain graphics could be moved to the internal storage to save space on the ramdisk.

Hahaha wow what are you doing here it's like you didn't even test this at all. I'm tried to flash the installer in twrp and it tells me that this recovery is only for guacamole not OnePlus 7 pro. So it does not support custom roms clearly cause I'm on bliss

shadowikr said:
Not exactly, try - fastboot flash recovery *drag the image into the cmd then press enter*
Click to expand...
Click to collapse
There is no recovery partition on modern Android devices. The boot.img ramdisk contains the recovery

paranoid Android back to stock 10.3.0?

I'm on the latest paranoid Android beta with twrp and magisk installed, can someone provide me with the steps to flash stock ROM 10.3.0 without losing twrp? I don't mind not being rooted
Thanks in advance!

just download the rom from here
flash it via twrp
then after setting up your device reboot to fastboot mode and boot into twrp image
then flash twrp again( be sure to use the latest twrp image otherwise you will not be able to boot into twrp)
ps i dont now if thats gonna work:
flash the rom via twrp
flash twrp.zip
reboot to recovery and again reboot to system

Does TWRP work with 10.30? I couldn't get mine to boot TWRP once I went to 10.30

dimitrispas22 said:
just download the rom from here
flash it via twrp
then after setting up your device reboot to fastboot mode and boot into twrp image
then flash twrp again( be sure to use the latest twrp image otherwise you will not be able to boot into twrp)
ps i dont now if thats gonna work:
flash the rom via twrp
flash twrp.zip
reboot to recovery and again reboot to system
Click to expand...
Click to collapse
I would say, from TWRP :
- unistall magisk
- reboot recovery
- flash the rom zip
- flash twrp zip
- reboot recovery
- flash magisk
Geo411m said:
Does TWRP work with 10.30? I couldn't get mine to boot TWRP once I went to 10.30
Click to expand...
Click to collapse
Sure you can flash it, try 3.3.1-16 !
If you get an error by
Code:
fastboot boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img
try
Code:
fastboot flash boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img
.

[RECOVERY][anne][OFFICIAL][3.4.0-0] TWRP for Huawei P20 Lite

Official TWRP for Huawei P20 Lite
Working
Code:
[CENTER]* Touchscreen
* Adb
* Backup
* Wipe
* File manager
* MTP
[/CENTER]
Not Working
Code:
[CENTER]You tell me
[/CENTER]
Installation
Code:
[CENTER]* put your phone in fastboot mode and type
"fastboot flash recovery_ramdisk <grab_here_the_img>"
* reboot
[/CENTER]
Download
Code:
[CENTER]
[URL="https://twrp.me/huawei/huaweip20lite.html"]TWRP Official page[/URL]
[URL="https://sourceforge.net/projects/darkjoker360-developements/files/Huawei/P20%20Lite/TWRP/"]DarkJoker360 sourceforge[/URL]
[/CENTER]
Please support my work, it's very important! Thanks
DONATIONS
Regards !​

Reserved

Hi! Is this for emui 9?

there are few image installation options, only kernel, oeminfo, ramdisk, recovery_ramdisk, system image, vendor image. Ergo it's impossible install TWRP over eRecovery, which is quite important ...
But that's just my opinion

TureX said:
Hi! Is this for emui 9?
Click to expand...
Click to collapse
yes

Hello guys, I would like to inform you that this recovery is now official !

I'm a noob. What's the solution for command failed during installation?
U:\platform-tools_r30.0.4-windows\platform-tools>fastboot flash recovery_ramdisk twrp.img
Sending 'recovery_ramdisk' (13524 KB) OKAY [ 0.345s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
U:\platform-tools_r30.0.4-windows\platform-tools>

JairoAV25 said:
I'm a noob. What's the solution for command failed during installation?
U:\platform-tools_r30.0.4-windows\platform-tools>fastboot flash recovery_ramdisk twrp.img
Sending 'recovery_ramdisk' (13524 KB) OKAY [ 0.345s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
U:\platform-tools_r30.0.4-windows\platform-tools>
Click to expand...
Click to collapse
Bootloader and FRP unlocked (both red on Fastboot screen)?

Hello , i flashed con ram-disk but always boots on erecovery, theres way to boot on twrp recovery??

Hello!!
I install twrp 3.4 correctly. I tried to make a backup but it failed. "Can not create 'external_sd/TWRP' folder (Permission denied). Tested on internal memory and SD, same failure.

Hello.
I flashed the recovery without any error...
"target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (13524 KB)...
OKAY [ 0.393s]
writing 'recovery_ramdisk'...
OKAY [ 0.143s]
finished. total time: 0.537s"
but when I reboot and try to boot in recovery is booting in eRecovery.
I'm running EMUI9.1
Does anybody have a similar problem?
---------- Post added at 07:08 PM ---------- Previous post was at 06:25 PM ----------
harryfokker said:
Hello , i flashed con ram-disk but always boots on erecovery, theres way to boot on twrp recovery??
Click to expand...
Click to collapse
Hello.
to enter in TWRP Recovery after installing it you need to:
- Turn your smartphone off
- Disconnect the usb cable
- Press volume up and power button and keep holding them till you see the Huawei logo.
- Release the buttons immediately you see Huawei logo.
- Wait some seconds to see the TWRP recovery logo.

Hi! When i install twrp i can't boot to the ROM cause he boot again on twrp , so i must reinstall stock erecovery to correctly boot. Why ? Is there any way to keep twrp installed?
Thanks

TureX said:
Hi! When i install twrp i can't boot to the ROM cause he boot again on twrp , so i must reinstall stock erecovery to correctly boot. Why ? Is there any way to keep twrp installed?
Thanks
Click to expand...
Click to collapse
Wipe data from erecovery is needed.

DarkJoker360 said:
Wipe data from erecovery is needed.
Click to expand...
Click to collapse
Hi! Thank you to reply, so i need to wipe with erecovery even when i currently run los 16?

TureX said:
Hi! Thank you to reply, so i need to wipe with erecovery even when i currently run los 16?
Click to expand...
Click to collapse
No, the wipe of erecovery is meant to replace twrp format data

DarkJoker360 said:
No, the wipe of erecovery is meant to replace twrp format data
Click to expand...
Click to collapse
OK but if i keep installed twrp i can't boot cause i get a loop( only reboot to twrp)

TureX said:
OK but if i keep installed twrp i can't boot cause i get a loop( only reboot to twrp)
Click to expand...
Click to collapse
It won't boot loop you wipe data from twrp after the installation of los

n.sim said:
It won't boot loop you wipe data from twrp after the installation of los
Click to expand...
Click to collapse
Ye i know , i'm using los but after wipe with erecovery and boot to the ROM , if i would keep twrp instead erecovery that bootloop in to the twrp for each action i do( reboot , shut down and shutdown througt the power button boot only on twrp)

So no way to keep installed twrp instead recovery? Cause if i keep twrp , i got bootloop on twrp ( i cannot boot on the rom until reflash stock recovery_ramdisk)

..