Hey all,
Sorry if posted in wrong section. Wasn't sure where's best. Please move or del if necessary.
I recently bought a FreedConn Bluetooth system for my helmet and it has a button on it that when held makes your paired phone dial the last number in your dial list.
This is pretty useless to me and I'd love to instead have it launch Voice Search so can easily send texts and make calls.
I googled a bit and found no way to adjust this on the device itself and looked at Tasker but don't believe it can do what I need.
I'm looking for a way to await the signal from the Freedconn and adjust what action it triggers. Or await an attempt to dial the last number dialed and launch a diff action.
Any advice on this is appreciated. Thank you.
I found a mini workaround having my own number as the last dialed and creating conditions (if calling myself w/ specific BT connected, hang up and run voice search) it works but hoping for a cleaner way. Any ideas?
Related
Does anyone know of a prog to divert calls?
I do understand that you can set up one divert profile with the operator, but being awkward I would like to set up more than one.
Don't know if there is a utility out there to do this.
Any help greatly appreciated.
Lee
You mean as in to forward your calls? Go to Start>>Settings>>Phone>>Services Tab>>Click "Call Forwarding" then "Get Settings" Button and adjust from there.
EDIT: You want to be able to change this easily using "profiles"? A option would be to use a marcro recorder or a script editor and give each macro/script/profile its own icon, so that when you click it it does the above. I used the program MacroRecorder when I had a smarphone, it may work on our OS too, I'm not sure. You could also download MortScripts if you'd prefert to write a script.
Hi thank you for your input.
You have got the idea exactly, got a new car with a "stupid" car kit built in.
The car kit takes a sim card... never heard of bluetooth!!!!!
O2 say they don't (and never have) offered a "dual sim" option. I was hoping to switch the phone off when I got in the car.
So the next idea is to put a pay as you go sim in the car kit and diver all calls from the main number to the car kit.
I already have a divert set up when I cannot take a call, and being lazy I suppose would love a little utility that swaps the divert between the two numbers.
Probably not upto writing scripts or macro as i don't want to mess up my phone
But once again thank you for your help
Not a tool but....you may check out *# codes (aka "GSM codes"), compose the one you need and create a phonebook entry. To run the network service you may put this entry to a speed dial button and activate it manually when you enter the car. Means you run a call to this "number". That's how I forward all calls from my private phone to my company phone: in the morning: call **21*mynumber# and to switch forwarding off in the evening: call #21#. Works pretty good.
http://www.hackcanada.com/blackcrawl/cell/gsm/hashcod.html#divertno
Cheers,
Derek.
Thank you so much
PERFECT
You are welcome...
btw: you will most likely be charged for call forwarding between different providers. At least in Germany they do it.
The coolest thing for you would be T-Mobile-like "Multi-SIM". IMHO the best Multi-SIM implementation ever as you can leave both phones switched on and none of them is kicked out of the network. They just ring both and both present the same number to the far end.
It's a shame that O2 doesn't offer something like this...
Luckily O2 offer unlimited O2 to O2 calls so with luck the divert will be included.
The lady on customer support was quite useless (as per usual) didn't know if it was or wasn't
Can't use T-Mob no reception at home
Going to try and block/bar own number on the pay as you go sim so I can make outgoing calls without confusing people too much.
I blame you Germans - thought Porsche would have a bluetooth PCM - Land Rover have for about 3 years as standard!!! lol
Thank you again for all your help, hopefully a German car will be more reliable than a Land Rover
Porsche? Great! At least it will have better brakes than a Landy
There is also a program "PhoneAlarm" which can be used to divert calls. You can feed 4 or 5 numbers to which you would like your calls to be diverted. From the Today Screen Plug-In of phonealarm you just need to press and hold and you would be presented with a list of numbers to select the one you currently want the calls to be diverted to.
Regards
thanks so much. it worked on my diamond. Indian model.
Is there any possibility to get MSVC working on Diamond 2? I used it on my old O2 XDA Orbit 2 with Bepes Rom. Now I'm interested in to use it on my Diamond 2, or should I wait for official Update on Windows Mobile 6.5 with "TellMe" ?
I managed it, but it does not work and caused a problems (i.e. once connected to BT, it always stays connected).
Working fine on mine through bluetooth, I'm using V1.6.19214 found in a link here on XDA. I don't bother with the call button activation, which can be problematic to get working, as I only need it for voice dialling through my BT headset.
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
eatmyshorts said:
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
Click to expand...
Click to collapse
Hi,
I've voice command 1.6 in french, and it works nearly amazing fine. I'm not using bluetooth with it, and the only problem is that, sometimes, when I ask 'CALL ... AT HOME', it asks for confirmation, and it does not understand the 'YES' answer. This problem did not happen with version 1.5.
I also disables incoming caller names, because it has a conflict with the ring, and both are not audible (ring distorded, and voice not understandable).
But it tells you the meetings, mails, battery status, next appointements, etc...
Really amazing on a small device. I don't use contacts mamangers anymore for calling : just using voice command. I even work in the car, with the ambiant sound engine, and radio on (not too loud!). Worth the price for 19.95$ (as far as I remember).
regards,
Olivier.
PS: it fails on install because it has not enough hardware button. After install, go in the settings -> buttons and assing it to the only button. Pressing Green key for two seconds, and wait the the beep and microphone icon on notify bar. If you press the button too long, it makes a loud beep to tell you it is cancelled. You can also magic button, or remap the soft keys.
I used to use Cyberon Voice Commander to make a call. I have no idea how come HTC took off this software on Diamond 2...
I have sent the email to Cyberon to ask if there is any possible way to get their Voice Commander. They responded that the software now has retail version for about 10 languages, and they offer the full function 30-day trial on their website. I am using it so far. It works well on my Diamond 2.
Vito
Vito technology has 2 voice command apps. VoiceDialer to simlpy call some1 and Voice2Go to launch apps and cpntacts and so on.
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
broman.m said:
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
Click to expand...
Click to collapse
Try the latest version of Cyberon Voice Commander v2.5.2r from Cyberon website http://www.cyberon.com.tw/order_Product_con.php?NO100=15 as Lacerta mentioned .
This version provides "hold Volume-up" or "hold Volume-down" to launch CVC in Setting, as well as you can start it by pressing the button on BT earset.
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
mboessen said:
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
Click to expand...
Click to collapse
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Bruce Inman said:
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Click to expand...
Click to collapse
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Voice Dial for Touch Diamond 2
Hello, All:
Concerning voice dial for the Touch Diamond 2, I found Cyberon Voice Dial on this bulletin board in a thread somewhere, but, regretfully, I can't find it back. IF you can find it, it is DA BOMB!! Yeah, you have to record the voice tags, but it works great in noisy environments and almost never makes a mistake. I don't use BT with the new phone, but Cyberon worked great with the BT on my old Wizard. Whatever you do, don't pay for Vito Voice Dial. It is truly unserviceable in any situation with even moderate noise.
Good Luck! Hope this helps.
GrandAdmiral said:
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Click to expand...
Click to collapse
The program won't even start for me on WiFi.
I believe the network issue is specific to AT&T from what I have read. No fix for this yet.
Pity....
Hello All,
Purchased an U S Cellular HTC Touch Pro via CL,mainly for using as a gps unit while motorcycling. Now I decide I may as well try Google Voice to utilize the WM6.1 funcionality a little more. Got my NEW Google Voice number activated no probs.
Download iDialer, iContact,and Greenbutton and installed,,looks very slick!
I guess I was not looking far enough ahead,as I am not a real phone junkie,I have to admit.
I added the parameters for my GV account with the handy config.cab that you generate on the Idialer website,,which is pretty sweet in itself. BUT,,, I do not have an actual data plan,,,AKA: phone is not activated...
Problem: I have my GV number forwarded to my home phone number,and realize now that this will not work for people being able to call me on my Touch Pro phone via GV while I'm on the road.( I mistakenly set the GV number up as the TP phone number on this device)
Call me stupid. What do I need to do to be able to 'forward' my GV number to this Touch Pro phone? Is there any free DID? numbers I can get to associate to this phone so as long as I have an WIFI connection I can either make or get calls made on this phone?
I have read so many various VOIP articles on this and am more confused now than I was 5 days ago..
I am sure this has been hashed a zillion times,but I honestly could not find a step.1,,step.2,,step.3,, how to accomplish this.
Thanks in Advance.
Barry
I apologize if this already exists, but I was unable to find anything on Google or the forums here.
I'm wondering if it's feasible to create an apk that will do the following:
Upon incoming call, check the number. If it exists in a database of user-added numbers, or is Unknown/Private (if this setting is selected), then the call is answered by the phone automatically (without playing a ringtone), the mic is shut off, and it plays back a recording of the "The number you have dialed is not in service". Set it to disconnect after 30 seconds or so, if the other end of the call doesn't end it themselves.
I believe this would be useful as a sort of black-listing program, and should anyone call that number while blacklisted, they would most likely remove the number from their list. I see this being beneficial for telemarketers, collections calls, Ex-boyfriends/ex-girlfriends, that stranger in the bar you gave your number out to after you had too much to drink, etc.
While I realize there are a number of call-blocking programs out there, I think the main selling point of this would be that it would stop the calls from coming from that source.
Sorry if a thread like this exists somewhere, or even an app, but I couldn't find anything. I've just been thinking about this a lot lately, and while I have some experience programming, I have yet to touch anything for the Android OS.
Thanks!
check the market for a callblock app, shold be what your looking for
Not exactly. The call blocking applications I've seen so far either send them directly to voicemail, or pick up the call and immediately hang up on them.
The primary difference I'm looking for is muting the microphone and playing back a message prior to hanging up the call.
Does this already exist? If not, is it possible to create? Again, I have no experience coding for Android, so I don't know what we can and cannot do, although I imagine it probably would be possible, preferably without root (so as to reach a wider audience).
i believe you can do this with google voice.
i think if you mark the number as spam or block it in google voice it plays that type of message.
The only problem with that, is it requires the use of the Google Voice number, right? Which does not help for those who already have the current number. See OP:
I see this being beneficial for telemarketers, collections calls, Ex-boyfriends/ex-girlfriends, that stranger in the bar you gave your number out to after you had too much to drink, etc.
Click to expand...
Click to collapse
I apologize for this needing to be moved. My original question was actually whether or not it was possible, but this turned more into a "Try this app" thread.
PyRo_DuDe said:
The only problem with that, is it requires the use of the Google Voice number, right? Which does not help for those who already have the current number. See OP:
Click to expand...
Click to collapse
i believe if you end up using google voice for voice mail (where you dont have to have a gv number) it does this also.
Greetings everyone.
I've been googling for a problem I have and weirdly didn't find any answer, so I sincerely apologize for troubling you today.
I'm looking for any app or method to auto-play a voice message whenever I receive a call from a specific number.
(I work in a call center of sorts where I receive countless calls and have to introduce myself in a long and tedious introductory process, most of the times turns out the caller dialed the wrong extension and it's too much of a hassle for each and every call. Also, vocal chord polyps are a real nightmare)
I tried an app called MacroDroid and for some reason it wouldn't work most of the time, basically works once and stops afterwards. Got to set it up with the number I receive calls from and to play a pre-recorded voice note I made but it wouldn't repeat after the first time it works
Can anybody suggest any method to achieve what I need??