Related
NOTE: Says when on rsd mode failed to boot 0x00001
on fastboot same + is says failed to format pds and does't connect to the pc after that
i have over 50 hours in 5 days looking for way to fix no luck .
i try my luck with Fastboot. I first tried flashing the recovery with no luck. I then tried flashing over the official moto files (boot/sytstem/....)
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
C:\SDK_tools>fastboot flash boot boot.img
sending 'boot' (8192 KB)... OKAY [ 0.694s]
writing 'boot'... FAILED (remote: (19000008))
....
If i follow that order boot/system and recovery fail then userdata says it works and it lets me flash the other options (but clearly just says they work it looks like it's lying)
C:\SDK_tools>fastboot flash boot boot.img
sending 'boot' (8192 KB)... OKAY [ 0.694s]
writing 'boot'... FAILED (remote: (19000008))
.......
C:\SDK_tools>fastboot flash userdata userdata.img
sending 'userdata' (139233 KB)... OKAY [ 11.598s]
writing 'userdata'... OKAY [ 0.164s]
finished. total time: 11.764s
C:\SDK_tools>fastboot flash boot boot.img
sending 'boot' (8192 KB)... OKAY [ 0.688s]
writing 'boot'... OKAY [ 3.462s]
finished. total time: 4.151s
.....
If I try fastboot oem unlock I'm prompted with the unlock message and after hitting accept. I see the following error on the screen
ERROR: Failed to format UDA.
Error while unlocking device.
My next try was with RSD light. I tried flashing all of the images for my xoom off this site . all of them give me the following error:
Failed flashing process. Failed Flashing process. Interface AP-OS: Error flashing subscriber unit. Device API error: 0xE0020085 Address: 0x1F870 Command: ADDR (0xE0222085); phone connected
I ran out of ideas on what to do next. One post i saw said try using a nand backup but I can't find one that will work.
Any help would be great. I really love my XOOM and I'm sad i can't fix it.
Okay i have an A1-830 & was installing a game, made a couple of modifications & now i have a soft bricked device.
I was installing Gangstar Rio & made some changes to try & get it to run as the minimum specs, my device had to run it but @ 1st it stated that the license was invalid so i changed the date backa year on advice from someone & it worked but then it stated that the device was incompatible, so i researched & found that was happening to most with devices that should have ran it but someone had advised to make some change to the 'batch.prop' file to fool the game to think it was a different device. I may have accidentally changed something in the batch file that caused this. i can't be certain but yeh, when i rebooted my tablet it got stuck @ the Acer logo in bootloop.
I tried recovery & did a factory reset & it acted like it was working but when i rebooted my device it still bootlooped. I then did some research & i tried to flash the stock rom but got errors each time i tried. i'll list the errors below;
i started off trying to flash the 'system.gz' file as follows;
>fastboot flash system Acer_AV052_A1-830_1.014.00_WW_GEN1.system.img.gz
> target reported max download size of 614470997 bytes
Invalid sparse file format at header magi
error: write sparse_skip_chunk: don't care size 202408408 is not a multiple of the block size 4096
sending sparse 'system' (600068 KB)
error: write sparse_skip_chunk: don't care size 202408408 is not a multiple of the block size 4096
error: write sparse_skip_chunk: don't care size 202408408 is not a multiple of the block size 4096
OKAY [ 68.091s]
writing 'system' . . .
FAILED (remote: flash_cmds error!)
>fastboot flash system Acer_AV052_A1-830_1.014.00_WW_GEN1.system.img
> target reported max download size of 614470997 bytes
Invalid sparse file format at header magi
sending sparse 'system' (585989 KB) . . .
OKAY [ 61.418s]
writing 'system' . . .
FAILED (remote: flash_cmds error!)
.................and these were the bootloader errors that appeared;
E: Unknown chunk type
failed: no such file or directory
E: flash system failed
FLASH FAILED!
--------------------------------------------------------------------------
these are my build & region details too;
region: Australia (South East Asia)
build #: ' Acer_AV0K0_A1-830_1.007.00_WW_GEN1
------------------------------------------------------------------------------
so that is where i am stuck @, i even made sure that i had the correct 'Java Development Tool Package' & 'Android Studio' was complete but everything else is out of my depth of knowledge. Any help will be 10 fold appreciated in advance...... :good:
acer a1-830
hi, i also have this problem, and i couldn't solve it yet. please inform me when you will have an resolve at mail [email protected]. best regards
---------- Post added at 09:10 PM ---------- Previous post was at 08:46 PM ----------
at the first flash boot, fastboot and recovery, then poweroff, after that flash system.img.gz
trinky13 said:
hi, i also have this problem, and i couldn't solve it yet. please inform me when you will have an resolve at mail [email protected]. best regards
---------- Post added at 09:10 PM ---------- Previous post was at 08:46 PM ----------
at the first flash boot, fastboot and recovery, then poweroff, after that flash system.img.gz
Click to expand...
Click to collapse
finally sorted it out.... it was simply the order that i was doing it in.... was basically flashing it backwards, hence causing the errors i was getting, arrrrrgh..... but @ least sorted, thanks a heap trinky for advising of the order @ the bottom of ur post!
KENTzee said:
finally sorted it out.... it was simply the order that i was doing it in.... was basically flashing it backwards, hence causing the errors i was getting, arrrrrgh..... but @ least sorted, thanks a heap trinky for advising of the order @ the bottom of ur post!
Click to expand...
Click to collapse
can you share how did you solved it? i'm also stuck in bootloop acer iconia a1-830, trying to find stock firmwares and flash it.
thanks...:crying:
trinky13 said:
hi, i also have this problem, and i couldn't solve it yet. please inform me when you will have an resolve at mail [email protected]. best regards
---------- Post added at 09:10 PM ---------- Previous post was at 08:46 PM ----------
at the first flash boot, fastboot and recovery, then poweroff, after that flash system.img.gz
Click to expand...
Click to collapse
Still getting these errors even I follow your instruction.
target reported max download size of 614886058 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 201994712 is not a multiple of the block size 4096
sending sparse 'system' (600472 KB)...
error: write_sparse_skip_chunk: don't care size 201994712 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 201994712 is not a multiple of the block size 4096
OKAY [ 68.063s]
writing 'system'...
FAILED (remote: flash_cmds error!)
finished. total time: 81.760s
I also have a problem along the same lines, I have a feeling I'm getting closer to solving it, but I can't seem to get it to boot.
It all seems to go well..
Code:
sending 'boot' (7591 KB)...
OKAY [ 0.886s]
writing 'boot'...
OKAY [ 0.919s]
finished. total time: 1.810s
sending 'fastboot' (9893 KB)...
OKAY [ 1.309s]
writing 'fastboot'...
OKAY [ 1.016s]
finished. total time: 2.332s
sending 'recovery' (9227 KB)...
OKAY [ 0.996s]
writing 'recovery'...
OKAY [ 0.979s]
finished. total time: 1.979s
sending 'system' (797732 KB)...
OKAY [ 51.121s]
writing 'system'...
OKAY [ 70.428s]
finished. total time: 121.554s
Then I try to start the tablet but just get a quick flash of the USB symbol and nothing else. I've tried various things but I'm not sure if I'm missing something here or not. Can anyone suggest anything? This is driving me crazy.
darkfilth101 said:
can you share how did you solved it? i'm also stuck in bootloop acer iconia a1-830, trying to find stock firmwares and flash it.
thanks...:crying:
Click to expand...
Click to collapse
http://www.mediafire.com/download/dxyx2q9ef4p8n17/SDs_Acer_AV0K0_A1-830_1.007.00_WW_GEN1.zip
here you go buddy
Hi RAZERZDAHACKER, how can I flash this zip?
all tutorials are about img files, but there are folders on zip
---------- Post added at 04:42 PM ---------- Previous post was at 04:24 PM ----------
nevermind, so easy, "apply update from external storage"
but I got error
Code:
E:end of footer from /tmp/sideload/package.zip not 0xFFFF (File exists)
E:signature verification failed
tictacbum said:
Hi RAZERZDAHACKER, how can I flash this zip?
all tutorials are about img files, but there are folders on zip
Click to expand...
Click to collapse
Download this to your computer and unzip it. Don't unzip the system folder in the zip file. Open fastboot and do fastboot flash boot (the boot img) then once that's done, do fastboot flash fastboot (fastboot img) then do fastboot flash recovery (recovery img) and then do fastboot reboot-bootloader. Then do fastboot flash system (system img.gz). Then on the tablet using the volume keys and the power button, go to recovery and wipe data then reboot, now it should be done!
---------- Post added at 05:42 PM ---------- Previous post was at 04:47 PM ----------
p0st3r^ said:
I also have a problem along the same lines, I have a feeling I'm getting closer to solving it, but I can't seem to get it to boot.
It all seems to go well..
Code:
sending 'boot' (7591 KB)...
OKAY [ 0.886s]
writing 'boot'...
OKAY [ 0.919s]
finished. total time: 1.810s
sending 'fastboot' (9893 KB)...
OKAY [ 1.309s]
writing 'fastboot'...
OKAY [ 1.016s]
finished. total time: 2.332s
sending 'recovery' (9227 KB)...
OKAY [ 0.996s]
writing 'recovery'...
OKAY [ 0.979s]
finished. total time: 1.979s
sending 'system' (797732 KB)...
OKAY [ 51.121s]
writing 'system'...
OKAY [ 70.428s]
finished. total time: 121.554s
Then I try to start the tablet but just get a quick flash of the USB symbol and nothing else. I've tried various things but I'm not sure if I'm missing something here or not. Can anyone suggest anything? This is driving me crazy.
Click to expand...
Click to collapse
I am not sure but by now you must have probably fixed it but try to boot into recovery and wipe data and reboot. That usually fixes bootloops upon flashing stock roms *ehum*samsung*ehum*, never the less, it also worked for me in my acer and I am back and running!
big thanks! tablet is booting fine again
tictacbum said:
big thanks! tablet is booting fine again
Click to expand...
Click to collapse
YAAAAAAAAAAAAY!!! Ah, I remember when I was stuck in a bootloop (and was a noob at android) so I took it down to the shop and they gave me a new one, then it happend again and I got another one for free! But as always, I'm so glad it worked!
I'm also having the FAILED (remote: flash_cmds error!) error. I have tried to do the steps in the specified order in the comments and I still get the error.
Can anyone help me?
ricardodeus said:
I'm also having the FAILED (remote: flash_cmds error!) error. I have tried to do the steps in the specified order in the comments and I still get the error.
Can anyone help me?
Click to expand...
Click to collapse
Reboot droidboot and try flashing the 4.2.2 image, also, try flashing in this order (boot, fastboot, recovery, system).
Hit thanks if I helped.
RAZERZDAHACKER said:
Reboot droidboot and try flashing the 4.2.2 image, also, try flashing in this order (boot, fastboot, recovery, system).
Hit thanks if I helped.
Click to expand...
Click to collapse
Is the 4.2.2 image the Acer_AV0K0_A1-830_1.006.00_WW_GEN1_FLASHPKG version?
If so, I got the exact same error.
ricardodeus said:
Is the 4.2.2 image the Acer_AV0K0_A1-830_1.006.00_WW_GEN1_FLASHPKG version?
If so, I got the exact same error.
Click to expand...
Click to collapse
Nope that's KitKat, 14 is 4.2.2
RAZERZDAHACKER said:
Nope that's KitKat, 14 is 4.2.2
Click to expand...
Click to collapse
I first tried Acer_AV052_A1-830_1.014.00_WW_GEN1_FLASHPKG, then Acer_AV0K0_A1-830_1.006.00_WW_GEN1_FLASHPKG and got the same error for both.
target reported max download size of 614541994 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 244878635 is not a multiple ofthe block size 4096
sending sparse 'system' (600136 KB)...
error: write_sparse_skip_chunk: don't care size 244878635 is not a multiple ofthe block size 4096
error: write_sparse_skip_chunk: don't care size 244878635 is not a multiple ofthe block size 4096
OKAY [ 64.487s]
writing 'system'...
FAILED (remote: flash_cmds error!)
finished. total time: 78.156s
ricardodeus said:
I first tried Acer_AV052_A1-830_1.014.00_WW_GEN1_FLASHPKG, then Acer_AV0K0_A1-830_1.006.00_WW_GEN1_FLASHPKG and got the same error for both.
target reported max download size of 614541994 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 244878635 is not a multiple ofthe block size 4096
sending sparse 'system' (600136 KB)...
error: write_sparse_skip_chunk: don't care size 244878635 is not a multiple ofthe block size 4096
error: write_sparse_skip_chunk: don't care size 244878635 is not a multiple ofthe block size 4096
OKAY [ 64.487s]
writing 'system'...
FAILED (remote: flash_cmds error!)
finished. total time: 78.156s
Click to expand...
Click to collapse
Have you wiped data? Also, reboot droidboot and make sure fastboot recognizes the device. Maybe you can try adb pushing the files via fastboot oem startftm command.
Delete this
a1 830 no droid boot
ramiabouzahra said:
Delete this
Click to expand...
Click to collapse
help me guys my a1-830 no droid boot or recovery hang on logo only do you have solutions
rolly20 said:
help me guys my a1-830 no droid boot or recovery hang on logo only do you have solutions
Click to expand...
Click to collapse
How are you trying to access droidboot? You can't hang on logo if you don't have droidboot (it's the bootloader mate).
I have a Moto G (XT1032) running Android 5.0.2 that went out of charge one day. It then decided to boot into a black screen - i.e. I can see the Motorola splash screen (animation) but all I get after that is a black (grey) screen, not responsive to touch.
I tried a few things and they didn't work -
Fastbooted and selected 'Recovery' option - The Motorola logo (first screen of startup splash screen) appears briefly. Then the device returns to fastboot menu saying 'Boot Up failed'
Fastbooted and selected 'Factory' - The Motorola splash screen appears, boots into same black (grey) screen again.
The fastboot menu says "Device is LOCKED. Status Code: 0". I did not enable USB debugging before my phone stopped working.
How do I get my phone working again?
You do not need an unlocked Bootloader to flash one of the factory firmware images: (I suggest using only one of the 5.0.2 images)
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Is there important data on the phone? Then do not use the command: mfastboot erase userdata
lost101 said:
You do not need an unlocked Bootloader to flash one of the factory firmware images: (I suggest using only one of the 5.0.2 images)
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Is there important data on the phone? Then do not use the command: mfastboot erase userdata
Click to expand...
Click to collapse
i do it, and nothing happend, just the black screen at the end of boot animation, also i unlock the bootloader and try to install a recovery (i try cwm, twrp and philz), but when i enter into recovery, only shows a android robot and says "No Command".
Joncillo said:
i do it, and nothing happend, just the black screen at the end of boot animation, also i unlock the bootloader and try to install a recovery (i try cwm, twrp and philz), but when i enter into recovery, only shows a android robot and says "No Command".
Click to expand...
Click to collapse
Please provide a log from mfastboot of those commands being performed. Make sure to actually use mfastboot.
https://www.androidfilehost.com/?fid=23578570567719065
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash partition gpt.b
in
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.084s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.330s]
finished. total time: 0.418s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash motoboot motobo
ot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.151s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.957s]
finished. total time: 1.112s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.095s]
writing 'logo'...
OKAY [ 0.035s]
finished. total time: 0.132s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.447s]
writing 'boot'...
OKAY [ 0.599s]
finished. total time: 1.049s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash recovery recove
ry.img
target max-sparse-size: 256MB
sending 'recovery' (10240 KB)...
OKAY [ 0.446s]
writing 'recovery'...
OKAY [ 0.599s]
finished. total time: 1.049s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash system system.i
mg_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257883 KB)...
OKAY [ 9.591s]
writing 'system'...
OKAY [ 7.728s]
finished. total time: 17.323s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash system system.i
mg_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256754 KB)...
OKAY [ 8.955s]
writing 'system'...
OKAY [ 8.082s]
finished. total time: 17.042s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash system system.i
mg_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260090 KB)...
OKAY [ 9.657s]
writing 'system'...
OKAY [ 8.179s]
finished. total time: 17.843s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash system system.i
mg_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (165316 KB)...
OKAY [ 6.347s]
writing 'system'...
OKAY [ 6.282s]
finished. total time: 12.635s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash modem NON-HLOS.
bin
target max-sparse-size: 256MB
sending 'modem' (49356 KB)...
OKAY [ 1.943s]
writing 'modem'...
OKAY [ 0.780s]
finished. total time: 2.727s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.015s]
finished. total time: 0.022s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.012s]
finished. total time: 0.013s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (102 KB)...
OKAY [ 0.090s]
writing 'fsg'...
OKAY [ 3.185s]
finished. total time: 3.279s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.016s]
finished. total time: 0.017s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 0.020s]
finished. total time: 0.021s
C:\BRASIL_XT1032_5.0.2_LXB22.46-28_cid12_CFC.xml>mfastboot reboot
Click to expand...
Click to collapse
Thats all that i got... i don't know what else to do...
Joncillo said:
i do it, and nothing happend, just the black screen at the end of boot animation, also i unlock the bootloader and try to install a recovery (i try cwm, twrp and philz), but when i enter into recovery, only shows a android robot and says "No Command".
Click to expand...
Click to collapse
At this stage you should press power button for few seconds and tap vol +, it is the way to enter recovery in lollippp, correct me if I am wrong.
Sent from my XT1033 using Tapatalk 2
pradeeppk said:
At this stage you should press power button for few seconds and tap vol +, it is the way to enter recovery in lollippp, correct me if I am wrong.
Sent from my XT1033 using Tapatalk 2
Click to expand...
Click to collapse
i do it, but i get the same message, "No Command"
lost101 said:
Please provide a log from mfastboot of those commands being performed. Make sure to actually use mfastboot.
Click to expand...
Click to collapse
I see something wierd now, looks like the memory of the phone dosent save anything... sometimes, when the boot animation stops, i see the message of "1 of 1 Updates, android its updating" and then go to the black screen again... but, if i flash the phone, i shouldn't see that message, rigth? so, why i can still see it? how can i erase all the memory for sure???
Try flashing TWRP: https://www.androidfilehost.com/?fid=24052804347764184
Command: mfastboot flash recovery twrp-2.8.7.0.-falcon_STOCK.img - enter recovery afterwards.
If that fails to flash, try: mfastboot boot twrp-2.8.7.0.-falcon_STOCK.img
lost101 said:
Try flashing TWRP: https://www.androidfilehost.com/?fid=24052804347764184
Command: mfastboot flash recovery twrp-2.8.7.0.-falcon_STOCK.img - enter recovery afterwards.
If that fails to flash, try: mfastboot boot twrp-2.8.7.0.-falcon_STOCK.img
Click to expand...
Click to collapse
flash recovery dosen't work, but with boot yes! now i'm on TWRP! so, what next?? tell me what to do, i don't wanna screw it!!! jajaja
Joncillo said:
flash recovery dosen't work, but with boot yes! now i'm on TWRP! so, what next?? tell me what to do, i don't wanna screw it!!! jajaja
Click to expand...
Click to collapse
Do you have anything you need to backup from the phone? Do you have ADB installed?
ADB Installer: http://forum.xda-developers.com/showthread.php?t=2588979
Backup command: ADB pull /sdcard c:/motog_backup/
lost101 said:
Do you have anything you need to backup from the phone? Do you have ADB installed?
ADB Installer: http://forum.xda-developers.com/showthread.php?t=2588979
Backup command: ADB pull /sdcard c:/motog_backup/
Click to expand...
Click to collapse
Done, i backup all that i need... so, what next??? wipe? or i try to install 5.0.2 again but as zip?
Joncillo said:
Done, i backup all that i need... so, what next??? wipe? or i try to install 5.0.2 again but as zip?
Click to expand...
Click to collapse
Wipe > Format Data. Wipe > Factory reset. ADB push or sideload ROM.zip
lost101 said:
Wipe > Format Data. Wipe > Factory reset. ADB push or sideload ROM.zip
Click to expand...
Click to collapse
when i wipe the device, i get some errors.
E: MTP already enable
Formatting data using mkfs.f2fs...
Done
E: Unknown MTP message type 1:
You may need to reboot recovery to be able to use /data again.
Updating partition details...
E: Unable to stat '/data/data/com.google.android.gms/app_sslcache/www.googleapis.com.443'
E: Unable to stat '/data/data/com.google.android.calendar/databases/timelydata.db-shm'
...done
but don't wipe anything...
i try ADB Sideload but get an error too.
Starting ADB sideload feature... (After 10 minutes)
FAILED ADB Sideload complete.
and the CMD on windows says "Error: device not found"
also i try to install TWRP as zip, but when i restarted, enter into recovery and then i have the same android with error "No Command".
@Joncillo - See the last post in this thread: http://forum.xda-developers.com/moto-g/help/moto-g-bootup-problem-recovery-mode-t3122492 - you are both in the same situation I believe.
It's a known issue; where battery is allowed to die and has resulted in Bootloader / Partition corruption.
Try what I have suggested there - if that does not solve it, you may have to wait for a working Lollipop hardbrick solution, which would allow you to repair the Bootloader: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
lost101 said:
@Joncillo - See the last post in this thread: http://forum.xda-developers.com/moto-g/help/moto-g-bootup-problem-recovery-mode-t3122492 - you are both in the same situation I believe.
It's a known issue; where battery is allowed to die and has resulted in Bootloader / Partition corruption.
Try what I have suggested there - if that does not solve it, you may have to wait for a working Lollipop hardbrick solution, which would allow you to repair the Bootloader: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Click to expand...
Click to collapse
ahhhhhhhhh... i see... so, i have a dead phone... well, i'm going to try what you said in that post, thanks for all your help!!!
Help guys,
I bricked (bootloop) my OPPO Find 5 Mini but when i reboot recovery, its blank. Than I try to flash Via Fastboot mode, its not working.
This is my code :
D:\a>fastboot flash recovey (myrecoveryname).img
then this is the respond:
D:\a>fastboot flash recovery (myrecoveryname).img
sending 'recovery' (10240 KB)
OKAY [ 0.495s ]
writing 'recovery'...
FAILED (remote: partition 'recovery' not support flash)
finished.
I also can not format other partition, caused its RAW type partition.
Can I change the type of partition on my phone?
My android bricked(bootloop), no recovery, and the worst, raw partition
thanks,
One Fine morning when I checked my phone it said "optimizing app 69 out of 109"..Battery drained out . Recharged and noticed Device wont start and won't go past the "Moto G logo POwered by android" screen .
Steps taken so far :
Unlocked bootloader . Device status shows unlocked status 3 .
1. Followed the steps @ http://forum.xda-developers.com/showthread.php?t=2542219
No errors using XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xml.zip
Result:--> problem persists
Code:
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>vin
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash partition gpt.bin
target max-sparse-size: 256MB
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Flashing backup GPT image...
OKAY [ 0.300s]
finished. total time: 0.326s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash motoboot motoboot.img
target max-sparse-size: 256MB
sending 'motoboot' (1953 KB)...
OKAY [ 0.095s]
writing 'motoboot'...
(bootloader) flashing tz ...
(bootloader) flashing rpm ...
(bootloader) flashing sdi ...
(bootloader) flashing aboot ...
(bootloader) flashing sbl1 ...
OKAY [ 0.930s]
finished. total time: 1.031s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash logo logo.bin
target max-sparse-size: 256MB
sending 'logo' (295 KB)...
OKAY [ 0.040s]
writing 'logo'...
OKAY [ 0.059s]
finished. total time: 0.104s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash boot boot.img
target max-sparse-size: 256MB
sending 'boot' (10240 KB)...
OKAY [ 0.408s]
writing 'boot'...
OKAY [ 0.587s]
finished. total time: 1.001s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash recovery recovery.img
target max-sparse-size: 256MB
sending 'recovery' (9488 KB)...
OKAY [ 0.401s]
writing 'recovery'...
OKAY [ 0.172s]
finished. total time: 0.577s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash system system.img_sparsechunk.0
target max-sparse-size: 256MB
sending 'system' (257755 KB)...
OKAY [ 9.347s]
writing 'system'...
OKAY [ 7.850s]
finished. total time: 17.201s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash system system.img_sparsechunk.1
target max-sparse-size: 256MB
sending 'system' (256953 KB)...
OKAY [ 9.122s]
writing 'system'...
OKAY [ 8.006s]
finished. total time: 17.133s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash system system.img_sparsechunk.2
target max-sparse-size: 256MB
sending 'system' (260396 KB)...
OKAY [ 9.446s]
writing 'system'...
OKAY [ 7.997s]
finished. total time: 17.449s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash system system.img_sparsechunk.3
target max-sparse-size: 256MB
sending 'system' (166572 KB)...
OKAY [ 6.084s]
writing 'system'...
OKAY [ 6.310s]
finished. total time: 12.400s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash modem NON-HLOS.bin
target max-sparse-size: 256MB
sending 'modem' (49376 KB)...
OKAY [ 1.835s]
writing 'modem'...
OKAY [ 0.826s]
finished. total time: 2.667s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot erase modemst1
erasing 'modemst1'...
OKAY [ 0.014s]
finished. total time: 0.016s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot erase modemst2
erasing 'modemst2'...
OKAY [ 0.014s]
finished. total time: 0.017s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot flash fsg fsg.mbn
target max-sparse-size: 256MB
sending 'fsg' (103 KB)...
OKAY [ 0.053s]
writing 'fsg'...
OKAY [ 3.177s]
finished. total time: 3.234s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot erase cache
erasing 'cache'...
OKAY [ 0.017s]
finished. total time: 0.019s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot erase userdata
erasing 'userdata'...
OKAY [ 0.021s]
finished. total time: 0.024s
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>pause
Press any key to continue . . .
C:\Users\vinesriv\Downloads\XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xm
l>mfastboot reboot
rebooting...
2. When I use
Code:
Fastboot erase recovery
Fastboot Flash recovery twrp-3.0.2-0-falcon.img
And reboot in recovery mode the system still uses stock recovery .
3. I am able to
Code:
Fastboot boot twrp-3.0.2-0-falcon.img
and I can see the twrp recovery . I used it to wipe cache and user data .
Used this to install : XT1033_Retail_Asia_51_Untouched.zip
Got error
Symlink failed error code 1 . Rebooted in recovery and this error was gone . Successfully installed zip .
Result :--- Problem persists
4. when I tried booting into cynogen recovery or twrp-3.0.2-0-falcon.img recovery , I am not able to install cynogen mod rom -- cm-13.0-20160916-NIGHTLY-falcon.zip and the error is cannot Can't install this package on top of incompatible data .
5 . When I use cm-11-20140504-SNAPSHOT-M6-falcon.zip I get some symlinks failed .
Overall I feel the flashing although is not giving any error , it is not writing anything .
The reason I believe that is 1... after flashing recovery and trying to boot recovery it goes to standard recovery and not custom recovery.
2. My problem of bootloop remains unresolved.
I am not an expert so not sure if rooting is required and if yes, even then I am not sure how to be sure if my device is rooted . I have tried using r2-motog-superboot.zip and also tried installing supersu.zip using twrp without errors. But, how do I tell if it is rooted successfully and what difference should I see?
How to get out of this bootloop .? One more thing:- is it possible to test if this is a hardware issue like disk failure or something?
I keep getting IO error on Dalvik-cache/arm while trying to wipe partitions using twrp.
Any help will be appreciated .
try wiping data and recovery partition then installing the recovery followed by the zip.
Paradox♀ said:
try wiping data and recovery partition then installing the recovery followed by the zip.
Click to expand...
Click to collapse
I have tried that ..unless,, you are suggesting different commands than what I have already posted?
@vinny_80 - Your phone is exhibiting a number of the classic signs of 'corrupt emmc.' This is most likely the end of the road for your handset.
lost101 said:
@vinny_80 - Your phone is exhibiting a number of the classic signs of 'corrupt emmc.' This is most likely the end of the road for your handset.
Click to expand...
Click to collapse
That hurts !!
Is there a definitive test for this to be sure of corruption in Emmc ? I cant use adb to verify this , I guess ?
Further-- if emmc is corrupt,, would I be able to boot to twrp recovery.img using fastboot as I did? even stock recovery opens fine if I erase and install the same ... so I guess emmc is not corrupt and hence the question..whats the best way to test this ?
vinny_80 said:
That hurts !!
Is there a definitive test for this to be sure of corruption in Emmc ? I cant use adb to verify this , I guess ?
Further-- if emmc is corrupt,, would I be able to boot to twrp recovery.img using fastboot as I did? even stock recovery opens fine if I erase and install the same ... so I guess emmc is not corrupt and hence the question..whats the best way to test this ?
Click to expand...
Click to collapse
Recovery is read-only. That's what you are describing, and that is an indication of corrupt emmc. Booting into TWRP via fastboot boot twrp.img is possible with corrupt emmc. One other user managed to flash CM13 and still use the handset - but with frequent read-only issues I imagine.
vinny_80 said:
That hurts !!
Is there a definitive test for this to be sure of corruption in Emmc ? I cant use adb to verify this , I guess ?
Click to expand...
Click to collapse
Boot TWRP, try to wipe and install something, then run
Code:
adb shell dmesg > dmesg.txt
adb pull /tmp/recovery.log
Check both files for messages indicating corruption, e.g. mmcblk errors in dmesg or I/O errors in recovery.log. You can also upload the files if you can't make sense of them yourself.
_that said:
Boot TWRP, try to wipe and install something, then run
Code:
adb shell dmesg > dmesg.txt
adb pull /tmp/recovery.log
Check both files for messages indicating corruption, e.g. mmcblk errors in dmesg or I/O errors in recovery.log. You can also upload the files if you can't make sense of them yourself.
Click to expand...
Click to collapse
Here it goes:- I am not very hopeful
And I assume service center wont help either ? thoughts?
Regards
Vineet
vinny_80 said:
Here it goes:- I am not very hopeful
Click to expand...
Click to collapse
Yes, those I/O errors on mmcblk0 in dmesg indicate that there is something very wrong with your eMMC (internal flash storage device). Looks like a hardware defect to me.
If you have a Back Up ROM, maybe you can restore only the System ( With TWRP ) then try Flashing a New ROM, Hope this Help you.
Same problem here, XT1032, stuck on optimizing apps with RR 5.7.4 (MM). TWRP still working, reflashing same or older RR ROM worked, but still got stuck while optimizing apps. Already got a backup of contacts, logs and sms. What exactly are the recommended steps from here?
1. Wipe anything apart from cache/dalvik before flashing a ROM again?
2. Does it make sense to try other MM ROMs
3. Flashing factory rom?
Guttergorm said:
Same problem here, XT1032, stuck on optimizing apps with RR 5.7.4 (MM). TWRP still working, reflashing same or older RR ROM worked, but still got stuck while optimizing apps. Already got a backup of contacts, logs and sms. What exactly are the recommended steps from here?
1. Wipe anything apart from cache/dalvik before flashing a ROM again?
2. Does it make sense to try other MM ROMs
3. Flashing factory rom?
Click to expand...
Click to collapse
Flash the latest XT1032 Factory Firmware Image using mFastboot. If this is not successful, it would help to see a log of the flashing process. Copy and paste command prompt screen. Take screenshots if necessary.
mFastboot download: https://www.androidfilehost.com/?fid=24052804347778493
Firmware Images: http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Fastboot Tutorial: http://forum.xda-developers.com/showthread.php?t=2542219
Downgrade to a previous version.
I almost wasted an entire day on that ROM. But, this WORKED for me and got it fixed.
Cannot pinpoint what exactly worked.
But, I can say it for sure that do not use that ROM. (XT1033_FALCON_ASIA_DS_5.1_LPBS23.13-56-2_cid7_CFC.xml.zip)
I tried that and it seems the recovery img has some problems. Use just the previous version of it.
(XT1033_FALCON_ASIA_DS_5.1_LPB23.13-56_cid7_CFC.xml.zip)
You can find it here - Google - xt1033 firmware - firmware.center/firmware/Motorola link.
(Sorry, being this my 1st comment xda forum not allowing me to post a link here.)
Also, I followed some answers where they have said you will get some errors like "preflash validation failed" on your PC cmd line for boot img and system.img_sparsechunk, etc. Also, messages in red/pink on mobile fastboot cmd line suggesting "Downgrading to ..". But that's okay. Let it be. Give it 2-3 tries and at least wait 4-5 mins at boot.
It worked for me.
I am guessing it has some problems in downgrading.
(I am comparatively new to xda and mobile booting, so, my interpretation might be wrong, but, solution worked.
Experts feel free to correct my answers wherever you want. Just wanted to put it here because saw a lot of people facing this problem.)