I have just bought this unit and everything worked fine out of the box until i touched the factory settings and now bluetooth will not work
I have tried to get into rcovery settings and suceeded and did a fully factory reset and cache wipe but it does not seem to be a full genuine reset as when it reboots it still shows the logo i selected in the settings.
my units info is
Model: px5
Android Version: 8.0.0
Android security patch level: October 5th, 2017
Kernel Version: 4.4.93+
[email protected] #108
Thu Jan 25 17:07:43 CST 2018
Build number: px5-userdebug 8.0.0.OPR5 170623.007 eng hct 20180126 120432 test keys
MCU version: MTCE_KLD_V2.78_1
Jan 16 2018 19:19:56
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
Memory: 3891 MB
I tried MD725 (which i am almost sure it was originally) and SD968 i have also tired the parrot setting and bc8 and bc6 but after they are all applied the unit requests a reboot which it does, then nothing. the bluetooth searches but finds nothing and the phone keeps saying that there is a request from the car kit but if i pair then try to use the phone there is no sound and nothing shows on the head unit as connected. i am at my wits end.
Help someone please
===============Original factory setting is bc5 - problem now solved====================
Related
Hi!
I'm running a custom rom (CM 12.1), but my Xperia L doesnt detect any sim card more - even when I do a factory reset - "Emergency Calls Only"/sim card not detected. I tested and the sim card works on another cellphone. The Mobile Network option is greyed out, I can't turn on/off and the APN settings are not available for me - i can add manually an APN, but it disappear after "save". The Wifi is working normally - the problem it's just the sim card - no signal detected. The system says that phone number is unknow.
I tried some solutions (forum and googling it), but nothing works. This can be a hardware problem? I'm a bit confused.
Device Model: Xperia L
CyanogenMod version: 12.1-20160710-NIGHTLY-taoshan
Android version: 5.1.1
Android security patch level: July 1, 2016
Baseband version: 8930B-BAAAATAZQ-3228109-16-1016
Kernel version: 3.4.0-g8ce6fe2 [email protected] #1 Sun Jul 10 16:50:16 PDT 2016
Fehelberg said:
Hi!
I'm running a custom rom (CM 12.1), but my Xperia L doesnt detect any sim card more - even when I do a factory reset - "Emergency Calls Only"/sim card not detected. I tested and the sim card works on another cellphone. The Mobile Network option is greyed out, I can't turn on/off and the APN settings are not available for me - i can add manually an APN, but it disappear after "save". The Wifi is working normally - the problem it's just the sim card - no signal detected. The system says that phone number is unknow.
I tried some solutions (forum and googling it), but nothing works. This can be a hardware problem? I'm a bit confused.
Device Model: Xperia L
CyanogenMod version: 12.1-20160710-NIGHTLY-taoshan
Android version: 5.1.1
Android security patch level: July 1, 2016
Baseband version: 8930B-BAAAATAZQ-3228109-16-1016
Kernel version: 3.4.0-g8ce6fe2 [email protected] #1 Sun Jul 10 16:50:16 PDT 2016
Click to expand...
Click to collapse
Yes it could be a hardware problem since you did a reset, try blowing some air to the port with a hair dryer set to cold :good:
Fehelberg said:
Hi!
I'm running a custom rom (CM 12.1), but my Xperia L doesnt detect any sim card more - even when I do a factory reset - "Emergency Calls Only"/sim card not detected. I tested and the sim card works on another cellphone. The Mobile Network option is greyed out, I can't turn on/off and the APN settings are not available for me - i can add manually an APN, but it disappear after "save". The Wifi is working normally - the problem it's just the sim card - no signal detected. The system says that phone number is unknow.
I tried some solutions (forum and googling it), but nothing works. This can be a hardware problem? I'm a bit confused.
Device Model: Xperia L
CyanogenMod version: 12.1-20160710-NIGHTLY-taoshan
Android version: 5.1.1
Android security patch level: July 1, 2016
Baseband version: 8930B-BAAAATAZQ-3228109-16-1016
Kernel version: 3.4.0-g8ce6fe2 [email protected] #1 Sun Jul 10 16:50:16 PDT 2016
Click to expand...
Click to collapse
Did you try to flash the stock ROM.???
Hi guys i have what i can only describe as a big tablet (i believe it to be some sort of adverting screen running android kitkat) i have been looking for days for info on the device but have come up blank. I would like to be able to install new firmware as the one on it is very limited. all info i have is listed any advice on Firmware and how to install TWRP as device has no buttons bar 2 Power Button and Reset Button. device has 3 usb ports and i have keyboard installed.
elonex
AD181-SDCT-BBW1-A-V1
RK3188
ROCKCHIP
RK30SDK
RK30BOARD
ARM [email protected]
REVISION - R3PO
BUILD ID - CX-WF185IT-Z05-18.5-B1.02.20170412
BUILD/KOT49H
DALVIK 1.6.0
KERNEL VERSON 3.0.36+(ENG.ROOT.20151104.193426)
KERNEL ARCHITECTURE ARMV71
API LEVEL 19
OPEN GL ES 2.0
samsung 622
KLN8GIWEPD-B031
S4CRDMGXN
SKhynix
H5TQ2G83GFR
RDC 627V
DWMN0916LH1
Z05-V4.1 8G+1G
18.5/21.5-5V
04.600.ELC.0195
CXP02016376 KBL
ADW160851056
Im currently stuck on android screen lol any help would be greatly appreciated
Like in the subject - reversed view in a 2din Android station
MCU version - mtcd_kgl_v2.60_4
Aug 15 2017 19:26:09
Andriod version
5.1.1
Kernel version
3.0.101+
[email protected] #265
Tue Jun 20 00:45:21 CST 2017
Built number
rk3188-userdebug 20072017.21:56:11
Version info
Model number
A-MEDIA AUTO (1024X600 S)
S/N
f401030f1300180707e0fa5133504b52
CPU
ARM Cortex-A9 @1.6GHz (x4)
Memory
1024 MB
The touch functions are correct and in the right place - they are not reversed (like the view on the display). The station works smoothly. It looks like the display itself has gone into headup mode and the touch has remained unchanged. It happened after the installation of Sygic and unsuccessful attempt to start the car engine ... Entering the service menu does not give anything - no reboot settings - only changing the logo and other little needed "goodies" After entering the "recovery" menu, you can not start system restore - no file (s) or recovery - need firmware
thank you
Mcu update for px5 px6 and px30
MCTE_LM_V3.47m_1
Apr 7 2020 17:30:51
Not 3.7 that is an error in the title
Directions flash update image
Install apk
Reboot
Edit canbus
2007 Honda accord xtrons px5
If your mcu strats with mcte this should work for you if the hal9k mod works this should work for you file came directly from xtrons
I upgraded from v 3.44 without issues.
Files on Google drive
https://drive.google.com/folderview?id=1pOOrCqbGFXCwap37dcijVyB_HyBOzZt_
MCTE_LM_V3.47m_1
Apr 7 2020 17:30:51
Extract both place .img file on empty fat32 flash drive or sd card insert into unit then wait for prompt or go to settings system update install update unit will reboot then install apk file check backup camera and can bus settings you should see some new options in there specifically ferinheit for climate controls set and reboot again
Accepting donations at my go fund me
https://www.gofundme.com/f/waxtaxi?...board_a&rcid=17a142c74a184ed0ba9e9954cb570de8
Reversed
Reserved
Great, thanks for sharing. Its working on px30 . Sound seems good. share this in >>Wadzio thread << to boost sound no ?
Good day mates
I've bought a used ZONMAI XS9 knowing it's wired behavior "restoring after boot" , and today I have received the tablet.
I thought I could fix the problem rebooting in recovery mode and "flash heal" the device, but I've failed to do so.
Neither the button press method (select recovery mode from boot menu) nor using adb reboot recovery via USB connection succeeded. It seems the tablet tries to go into recovery mode, but can't boot it for unknown reason and falls back to main boot loading.
I can access the device and install applications setup WLAN do all kind of things, but after a normal reboot (or factory reset) ALL changes are lost, and last used state of the previous owner around 12.2021 is restored.
I've noticed a security patch discrepancy. In the "About tablet" tab the system claims security patch level April 2021 as latest patch -but- under System Update tab the last Android security update is registered October 5, 2019 that makes the 2 year difference between the update and patch, kind-a-weird I think.
I've tried an external SD-Card used in internal storage mode too, but after reboot the tablet forgot about the SD card and wants it to format again.
I've searched the internet for a stock ROM to flash but the ZONMAI seems to be Chinese mass market no-name brand, so I could not find one.
I think the eMMC might be the issue here may be damaged or some firmware issues?
Any ideas or clues ?
Greetings from PitcherGood
PS: Sorry if this is the wrong forum, i could not find a ZONMAI forum.
System Specs
Brand: ZONMAI
Model: XS9
RAM: 6GB
eMMc: 128GB
Android Version: 10
Security Patch Level: April 5, 2021
Kernel Version: 3.18.79 (gcc version ... Tue Nov 2 12:09:13 CST 2021)
Build number: C30V3.8_PJX06_EN_20211102
Custom build number.: C30V3.8_PJX06_EN_20211102