Database Info

[HOW-TO] Unlock and Root Moto G via Recovery/SuperSU

Unlocking the Bootloader is Required! This will erase all data and void your warranty!
Since all data will be wiped it's best to do this immediately after getting the phone. At least unlocking the bootloader.
I won't add a disclaimer, because if you trust some guide from some guy on the internet you should know what that means without being told explicitly.
For me the bootimage method posted on Modaco does not work and apparently others seem to have trouble as well (see the poll at Modaco). And since I couldn't find any guide here on XDA I thought I'd write one. XDA helped me a lot when I got my DHD, so maybe now I can help back.
This is based on soyd's guide at swedroid.se which I used to finally get my phone rooted after some unsuccessful attempts.
The guide is for Windows, but could probably be easily adapted to Linux/Mac by using the appropriate drivers/tools. I followed these steps to successfully root my Moto G (16 GB, german retail, Android 4.4.2, OTA 176.44.1).
Here're the neccessary steps:
Install Motorola and ADB Drivers
Unlock Bootloader
Flash Recovery
Flash SuperSU
Enjoy
Install Motorola and ADB Drivers
Do not connect your phone to your PC just yet.
If you already have ADB drivers and Motorola drivers installed, just skip this step.
Download these files:
Motorola Drivers
ADB Tools (thx to androidpit.info)
mfastboot.exe (only download that file from the G-Drive folder - thx to whoever uploaded it)
Run the MotorolaDeviceManager_2.4.5.exe you just downloaded and install it
Extract the two folders from adb-tools_treiber.zip
Open ADB-Treiber folder and run UniversalAdbDriverSetup.msi
Copy mfastboot.exe to ADB-Tools folder
Now this next part might be optional, but some things might not work without it and there's no real harm so:
Enable USB-Debugging
On your phone, open Preferences
Scroll all the way down to About this phone
Scroll all the way down to Build-Number
Tap 7 times on that entry
You'll get a message "You're a developer now"
Go back and open the new item Developer options
Check USB-Debugging
Connect your phone to the PC
Drivers will be installed and the phone will ask you to confirm USB debugging from that computer
Unlock Bootloader
There are probably lots of guides around, but to have it all in one place, here's yet another one:
!YOU WILL LOOSE YOUR WARRANTY AND ALL DATA BY UNLOCKING THE BOOTLOADER!
Switch off your phone
Hold Volume-Down and press and release Power to boot into Fastboot
A text screen should appear
Connect the phone via USB to the PC
Open a command prompt and browse to the ADB-tools folder you just created
Type:
Code:
fastboot oem get_unlock_data
You'll get five lines of characters, all beginning with (bootloader):
Code:
(bootloader) 0A40040192024205#4C4D3556313230
(bootloader) 30373731363031303332323239#BD00
(bootloader) 8A672BA4746C2CE02328A2AC0C39F95
(bootloader) 1A3E5#1F53280002000000000000000
(bootloader) 0000000
Copy all lines into one long string without the (bootloader) part!
You want something like 0A40040192024205#4C4D355631323030373731363031303332323239#BD00 and so on.
Open Motorola Unlocker Site (you need to sign-in)
Copy the string in the box at 6. and press Can my device be unlocked?
A Request my Unlock Key button should appear. Check I Agree to the legal stuff and press that button
Check your mail for the unlock key
In the ADB-tools folder type:
Code:
fastboot oem unlock [I]paste_your_key_here[/I]
The phone should reboot and greet you with a nice warning about you having lost your warranty.
Flash Recovery
Now that the booloader is unlocked you have to flash a custom recovery to be able to flash SuperSU.
Download the CWM image from this post. The file should be named something like recovery-clockwork-6.0.4.7-falcon.img. Copy the file to the ADB-Tools folder you created earlier and rename it to CWM.img
Your phone should still be connected to your PC and have finished rebooting and be in stock ROM.
In the ADB-Tools folder type:
Code:
adb reboot bootloader
The phone should reboot and the bootloader will come up again
To make sure all's working as expected type:
Code:
fastboot devices
You should get a response similar to:
Code:
List of devices attached
TA93005M6V device
To flash the custom recovery, type:
Code:
mfastboot flash recovery CWM.img
On the phone you might get a message about size mismatch, just ignore it. Now you have to enter the newly flashed CWM recovery. Take your phone and:
Press Volume-Down to scroll to the Recovery menu item
Press Volume-Up to select that item (yes, Vol-Up selects)
The phone will boot into recovery
Now is a good time to backup your system.
Press Volume-Down to scroll to Backup and Restore
Press Power to select that item
Press Volume-Down to scroll to Backup to /sdcard
Press Power to select that item
Backup will commence, once it's finished go back to the main menu and select Reboot, then confirm with YES
You phone will reboot into the stock ROM.
Flash SuperSU
Now you can finally flash SuperSU and be done with the whole business.
Download the newest SuperSU and save the file to your phone's SD-Card's root directory. The phone should show up as an MTP device in Windows file explorer.
In ADB-Tools folder type:
Code:
adb reboot recovery
The phone will reboot and once CWM Recovery has come up, use the Vol-Up/Down keys to scroll and Power to select
Select Install zip
Select zip from /sdcard
Select /0
You should find a file like UPDATE-SuperSU-v1.94.zip there.
Select that file, confirm YES and wait for the flashing to finish
Go back to the Main menu and select Reboot, confirm YES
The phone should once again reboot into normal stock ROM operation. To check if all went well, open the app drawer, tap on SuperSU and if no error message comes up... You're done!

I hope there are no mistakes anywhere in this guide and also that it might be helpful to some people...
Please comment if some things should be changed or improved.

Already guide is there general section..
http://forum.xda-developers.com/showthread.php?t=2585755
But you guide is simple and understandable.. So better stick this thread in this section..
Sent from my XT1032 using XDA Premium 4 mobile app

cdma moto g...?
Hey.. what about boost mobile moto g?? Its XT1031 and after pasting that string on motorola website it says your moble's bootloader can't be unlocked??

unlocking the bootloader worked great but it wont let me flash the recovery

keifus.rahn said:
unlocking the bootloader worked great but it wont let me flash the recovery
Click to expand...
Click to collapse
How you flashed it? Explain the steps you tried..
Sent from my XT1032 using XDA Premium 4 mobile app

bondisback said:
Hey.. what about boost mobile moto g?? Its XT1031 and after pasting that string on motorola website it says your moble's bootloader can't be unlocked??
Click to expand...
Click to collapse
I followed each step on this guide and i was using it threw android sdk but every time i select recovery on my device it says commands not found this is what i get in my comand prompt- target max sparse size error cant load recovery.img

keifus.rahn said:
I followed each step on this guide and i was using it threw android sdk but every time i select recovery on my device it says commands not found this is what i get in my comand prompt- target max sparse size error cant load recovery.img
Click to expand...
Click to collapse
Has anyone found success with a boost mobile variant please?

This was the easiest way for me and I used ROM manager to flash my recovery http://www.theandroidcop.com/how-to-root-motorola-moto-g/
Sent from my XT1031 using XDA Premium 4 mobile app

Remove the Spaces
bur2000 said:
I hope there are no mistakes anywhere in this guide and also that it might be helpful to some people...
Please comment if some things should be changed or improved.
Click to expand...
Click to collapse
I had the same problem at first. When you copy and paste the code on the website it put spaces between the code. There cant be any spaces then it will work. Hoped this helps XD

Thanks
Great guide, I used it to root my Moto G I got today but I had problems with flashing the Clockworld recovery. It simply would not work, said error. But I tried TWRP and it worked. But I also named it recovery.img and used your command but replaced CVM.img with recovery.img. Got rid of ALL of the bloatware. I was stuck at first because I didn't start the command promt inside of the adb tools folder.

Recovery issue
Guys I had a similar issue while flashing the cwm.
When I flash it in the first boot it works, I can enter in the interface and can create a backup or flash one, but after a reboot it do not enter again. I tried entering via fastboot -> Recovery and received the dead android icon with the "No command" message.
Tried installing via PlayStore and had the same result, even with the TWRP.
Any ideas ?

HOWTO: Root without unlocking the Bootloader

A lot of people have been asking, so here are my notes for gaining root w/o flashing or unlocking the boot loader. :good:
Thanks to Chromium and The Jack of Clubs for their initial concepts and documentation.
Download ADB and set up Tools
Download the full Android SDK here:
http://developer.android.com/sdk/index.html#download
(scroll to the bottom of the page -> DOWNLOAD FOR OTHER PLATFORMS -> SDK Tools Only)
Extract the android-sdk-windows zip to c:\android-sdk
Browse to C:\android-sdk\android-sdk-windows\
Double Click and run SDK Manager.exe
Uncheck everything except the Android SDK Tools and Android SDK Platform-tools
Hit the Install xx Packages button
Download Super SU and TWRP
Download the latest TWRP here:
http://techerrata.com/browse/twrp2/bacon
Extract the TWRP image file and save it as recovery.img in the following folder:
C:\android-sdk\android-sdk-windows\platform-tools
Download SuperSU here: http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
Plug your phone into your computer and Copy SU zip to the phone... (anywhere will work)
Get your Phone into Fastboot
Reboot the phone in fastboot mode (hold volume up + power). You should get a cyanogen guy smiling at you, this indicates the phone is in fastboot mode.
Open a command prompt and do:
cd C:\android-sdk\android-sdk-windows\platform-tools
Type:
fastboot devices
NOTE: You should receive a list of connected devices, this means your PC is connected to your phone. If not, something is wrong with ADB or your USB driver and you need to fix it before you can proceed!
Boot with TWRP and Flash
If “fastboot devices” worked without error, type this:
fastboot boot recovery.img
After the recovery.img transfers, your phone reboots into TWRP. Hit “Install” and choose the SuperSU.zip from the location on your phone that you saved it to earlier.
Once flashing is done, reboot and enjoy root. No re-imaging or unlocking your bootloader necessary.

Why is a unlocked bootloader a problem?

_Beni_ said:
Why is a unlocked bootloader a problem?
Click to expand...
Click to collapse
if you dont want to wipe data, it also sets flags a tamper bit (which can now be reset), or if you just plain dont want to.

The Jack of Clubs said:
if you dont want to wipe data, it also sets flags a tamper bit (which can now be reset), or if you just plain dont want to.
Click to expand...
Click to collapse
Ah ok, i did unlock and switch to PA after second boot , so there were no data that would be lost

May I ad that there is an easier way to get adb. Its a program called minimal adb. This what I used originally in case someone prefers to just download that file. Just an option thats all... :good:
Nice tutorial

Install TWRP and root LG v10 H901 T-Mobile

Download
Search for TWRP recovery for LG V10 H901 (File: twrp-2.8.7.0-h901.img (31.7 MB))
Backup Apps and Data
While this process should not wipe any of your data, a backup is highly recommended. Once you install a custom recovery like TWRP, make sure you backup your system, data,etc. from the recovery. It will be helpful in case anything goes wrong.
Prerequisites
This guide is compatible with LG V10 H901 only. Do not try it on any other devices or variants.
Unlocked bootloader is required to install a custom recovery like TWRP on your device. Click here.
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
Install Motorola USB Drivers on your computer.
Open Settings> Developer options and enable USB Debugging on your device.
Go to Developer options and enable Allow oem unlock.
How to Install TWRP Recovery on LG V10 H901
Download the recovery image file. Extract if in case a zip file. Now transfer the file to your PC where you can easily locate it.
Make sure you have setup ADB and fastboot on your PC. Also accept Always allow from this computer when you plug in the device for first time to enable USB Debugging.
Now power off your device and unplug it from your PC.
Boot into the bootloader or fastboot mode. To do so, press and hold volume down and the power button simultaneously for 5-6 seconds. When you see the bootloader screen, connect your device to the PC using a USB cable.(Choose fasboot if option is available) Alternatively, you can also issue the following command through your cmd or terminal, while connected to the PC in order to boot into the bootloader.
"adb reboot bootloader"
Navigate to the location where you have placed the recovery file. Rename the recovery file to a simple one, like recovery.img. While the folder with recovery.img file is open, hold shift key on keyboard and right-click on an empty space and select “Open command window here” option to launch a cmd window.
Now issue the following command in the command prompt to check your device connectivity
"fastboot devices"
Now flash custom recovery. Issue the following command for that.
"fastboot flash recovery recovery.img"
Custom recovery will now be installed on your device. Now boot your phone in recovery mode. You can do this by turning your device off and then press and hold volume down and power keys at the same time. Or you can simply enter the following command.
"fastboot boot recovery.img"
Once into the recovery, you can backup your current ROM, data, EFS and more.
Once you have installed TWRP, you are all set to install custom packages onto the device’s system. Alternatively, while on Linux or Mac OS, you can issue “./fastboot flash recovery recovery.img” command to flash the TWRP recovery.
Root
As you already have TWRP, simply flash the SuperSU file (version 2.56) to gain root access

@TheJesus @KAsp3rd, thanks guys for everything you've done over the past few days. no shade to @joe01gun but if people are going to use these instructions make sure you search the rest of the forum for what thejesus and kasp3rd put together to get us to this point - definitely appreciated. thanks @joe01gun for putting these additional instructions together.

Your post says the following:
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
yet, there's no link to the necessary files to "unzip" them. Any suggestions?
Thank you for the help, but where do we get fastboot set up on our PCs? Yes, this is getting confusing with the steps outlined above. I followed the first step and had to take out the battery because I was stuck in fastboot screen with small tiny text in the top left that didn't respond to any manipulation with the volume keys on the back of the device and wouldn't restart any way until I took out the battery.

sanjsrik said:
Your post says the following:
Set up ADB and Fastboot on your computer. You can download the minimal ADB and fastboot tool from here (unzip it) or get the quick ADB and fastboot installer from here.
yet, there's no link to the necessary files to "unzip" them. Any suggestions?
Click to expand...
Click to collapse
I think it's cause he's not allowed to post links yet cause he's too new. I followed this guide http://forum.xda-developers.com/nexus-5x/general/guides-how-to-guides-beginners-t3206930
You can get twrp from the development forum.

Why
Intended to put the information condensed....
Yep....new
Links could not be uploaded.

joe01gun said:
Intended to put the information condensed....
Yep....new
Links could not be uploaded.
Click to expand...
Click to collapse
Your condensed thread is more convoluted than the actual development thread which also includes the links to everything.
I'm still wondering why you have install Motorola USB drivers for an LG phone..

Understood
Understood

The one on development is straightforward and I managed to make it done.
If you don't lock the bootloader back, you will see bootloader unlocked when starting up.
If you have root enabled file explorer, you should remove /system/priv-app/adaptclient folder to avoid annoying root request from adapt.

Please use the main dev thread for instructions on what to do, found below. Having duplicates for what is essentially the same thing can cause confusion and just takes up unnecessary space. So I have closed the thread.
[Recovery][LG-H901] Unofficial TWRP
Forum moderator,
matt4321

Acer Predator 8 TWRP 3.0.2

TWRP 3.0.2 for Acer Predator 8 ported by Ruben. - If you like my work please donate here, it will also give me a boost to make more things for this device : https://www.paypal.me/RubenCraveiro
----------- -----------
IMPORTANT NOTE ABOUT ROOTING AND UNLOCKING BOOTLOADER:
After flashing TWRP 3.0.2, use the SuperSU 2.46 flashable zip, do NOT use latest version or will result in a bootloop. Good Luck and have fun with rooting. Unlocking bootloader will delete all your data, so please make a backup first. Thank you.
----------- -----------
CREDITS
And also, before anything i would like to say thanks to @arjaylzo for telling me the name of a device with TWRP which helped making this update possible.
REQUIREMENTS
1- Fastboot/ADB Drivers and ADB folder
For drivers: http://adbdriver.com - Download ADB Driver Installer (universal) from the website, extract it, connect device it should detect device(if not, enable USB Debugging and reconnect), and press install, it should install drivers.
For ADB Folder: download this and extract to your main drive(C:/): https://goo.gl/ZTrfBb
2- Unlocked Bootloader (you need requirement 1 to do this)
Instructions for Unlocking bootloader: Go on settings, about device, press build version several times till it says your a developer, go back to settings, press Developer Options, and enable OEM Unlocking. Power off, then press at same time Power and Vol+ button, then connect to pc and open a cmd and write cd c:\\adb and write fastboot oem unlock, then accept the prompt it will give on tablet, and follow the rest of the steps.
----------- -----------
New TWRP bugfix update! Now you can flash stock rom on TWRP without bricking! Download Page updated!
----------- -----------
BUGS:
1- adb shell command needs to be sent before system partition is mounted or it will give an error, after doing adb shell you can mount system and do all the modifications you need.
2- You cant flash any img on twrp it gives an error, im trying to fix.
3- Backups do work, but everytime twrp restarts, the device name seems to change (which means that on /TWRP/BACKUPS/devicename/backupsinside/ changes every reboot so you have to go get the backup inside the old devicename folder and put on the new devicename folder).
----------- ADITIONAL NOTES -----------
Im leaving an unsecured boot image because system seems not want to boot android if anything seems changed. So please if system does not boot after flashing twrp/rooting, flash the unsecured boot img on fastboot
----------- -----------
Steps TO INSTALL TWRP AND ROOT
1. Download and extract the files: https://drive.google.com/file/d/0BxzG5iupOOSKNTdlRC1Wd0VmTlk/view?usp=drivesdk
2. Power off the tablet.
3. Enter fastboot mode by pressing the power button while holding down Vol -
4. Open up command prompt and navigate to the directory where fastboot.exe is located.
5. Pass the following commands:
fastboot flash boot unsecuredboot.img
fastboot flash recovery TWRP.img
6. Reboot into recovery (TWRP) and install SuperSU v2.46.zip
----------- -----------
Acer Predator 8 Support website(sourcecode, manuals, drivers, stockrom):

http://www.acer.com/ac/en/US/content/support-product/6400?b=1
----------- -----------
SCREENSHOTS:
http://imgur.com/s7CgJPR

I stuck at step 4.
is this the directory where fastboot.exe is located -> C:\adb... I have 4 files there and 1 of them is named fastboot.
Also the files i downloaded and extracted from step 1 , do i need to put them in my device or they need to stay on my pc.

goleoldark said:
I stuck at step 4.
is this the directory where fastboot.exe is located -> C:\adb... I have 4 files there and 1 of them is named fastboot.
Also the files i downloaded and extracted from step 1 , do i need to put them in my device or they need to stay on my pc.
Click to expand...
Click to collapse
C:\adb is where my adb and fastboot commands are.. on the downloaded files from Step 1 only the SuperSU zip is needed on the tablet so that you can flash it later on with twrp, the rest you leave on pc and use fastboot to flash TWRP, unsecured boot image, etc...

Ruben Craveiro said:
C:\adb is where my adb and fastboot commands are.. on the downloaded files from Step 1 only the SuperSU zip is needed on the tablet so that you can flash it later on with twrp, the rest you leave on pc and use fastboot to flash TWRP, unsecured boot image, etc...
Click to expand...
Click to collapse
Ok so in "C:\adb" i put all files i downloaded from step 1 then I opened cmd in that folder , then i typed "fastboot flash boot unsecboot.img" and it said that i cant load or open unsecboot.img
Any idea why or where is my mistake ????

goleoldark said:
Ok so in "C:\adb" i put all files i downloaded from step 1 then I opened cmd in that folder , then i typed "fastboot flash boot unsecboot.img" and it said that i cant load or open unsecboot.img
Any idea why or where is my mistake ????
Click to expand...
Click to collapse
make sure you didnt put a folder inside the adb folder instead of the actual file and make sure your writing the right name of the file..

goleoldark said:
Ok so in "C:\adb" i put all files i downloaded from step 1 then I opened cmd in that folder , then i typed "fastboot flash boot unsecboot.img" and it said that i cant load or open unsecboot.img
Any idea why or where is my mistake ????
Click to expand...
Click to collapse
also its not unsecboot, the name i added on this thread was just so it would be faster, the name is unsecuredboot.img and not unsecboot.img i guess ill have to edit that in order for people following the tutorial by line dont make these mistakes..

how do i flash the stock rom came from Acer Predator 8 Product Support Page.
can i just flash this Android 5.1 Lollipop Image via TWRP???
TIA

xdadevelopers13 said:
how do i flash the stock rom came from Acer Predator 8 Product Support Page.
can i just flash this Android 5.1 Lollipop Image via TWRP???
TIA
Click to expand...
Click to collapse
yes

thanks. will i have to flash the stockboot.img and P8AcerRecovery.img via fastboot?
tried flashing the stock rom via TWRP but to no avail.
still cant pass the boot logo

xdadevelopers13 said:
thanks. will i have to flash the stockboot.img and P8AcerRecovery.img via fastboot?
tried flashing the stock rom via TWRP but to no avail.
still cant pass the boot logo
Click to expand...
Click to collapse
If you flash stock rom, i think you have to reinstall stock recovery, the rom itself already brings stock boot.. after flashing stock recovery it should boot since no modifications have happend

Wow good job! Now i have a recovery where i can flash my custom rom for the Predator 8.

p8tgames said:
Wow good job! Now i have a recovery where i can flash my custom rom for the Predator 8.
Click to expand...
Click to collapse
no custom roms yet

How to enter the command ?
Hi i am not so sure how to execute those info in my head and act on it so can anyone teach me ? how to root my Predator 8 GT-810 Android 5.1
i saw the instruction i dk how do i Unlock Bootloader (Fastboot) i search all over google and i dont really got the solution to the question so anyone can teach me ? and "4. Open up command prompt and navigate to the directory where fastboot.exe is located." do i extract the whole file i downloaded into my Acer predator 8 or ?... im stupid sorry ...

ZaineJJ said:
Hi i am not so sure how to execute those info in my head and act on it so can anyone teach me ? how to root my Predator 8 GT-810 Android 5.1
i saw the instruction i dk how do i Unlock Bootloader (Fastboot) i search all over google and i dont really got the solution to the question so anyone can teach me ? and "4. Open up command prompt and navigate to the directory where fastboot.exe is located." do i extract the whole file i downloaded into my Acer predator 8 or ?... im stupid sorry ...
Click to expand...
Click to collapse
On step 4 You need the fastboot files, (adb & fastboot) just search how to install adb and fastboot drivers, choose the directory where to install them and place the needed files inside that folder and open a command prompt on that folder so you can flash the files.

Ruben Craveiro said:
On step 4 You need the fastboot files, (adb & fastboot) just search how to install adb and fastboot drivers, choose the directory where to install them and place the needed files inside that folder and open a command prompt on that folder so you can flash the files.
Click to expand...
Click to collapse
ir I tried finding how to install fastboot driver on Google all showed me downloads links must do survey or download or purchase item to unlock the download files ... So I don't trust it so I kept searching "how to unlock fastboot Acer predator 8"
So for ADB I can search on Google and install it on my tablet ?

ZaineJJ said:
ir I tried finding how to install fastboot driver on Google all showed me downloads links must do survey or download or purchase item to unlock the download files ... So I don't trust it so I kept searching "how to unlock fastboot Acer predator 8"
So for ADB I can search on Google and install it on my tablet ?
Click to expand...
Click to collapse
no, Search how to unlock bootloader, it should show the method that works for most devices and give necessary drivers..

Ruben Craveiro said:
no, Search how to unlock bootloader, it should show the method that works for most devices and give necessary drivers..
Click to expand...
Click to collapse
http://gsmusbdriver.com/acer-predator-8
Does this work ?
Or
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/

ZaineJJ said:
http://gsmusbdriver.com/acer-predator-8
Does this work ?
Or
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
Click to expand...
Click to collapse
Yes, and after you unlock the bootloader, you put the necessary files in adb folder and flash them according to the stepts

Ruben Craveiro said:
C:\adb is where my adb and fastboot commands are.. on the downloaded files from Step 1 only the SuperSU zip is needed on the tablet so that you can flash it later on with twrp, the rest you leave on pc and use fastboot to flash TWRP, unsecured boot image, etc...
Click to expand...
Click to collapse
Hi Ruben Craveiro is this the correct way ? i plugin usb cable into Predator 8 but it says its waiting for device is it the correct way ? after typing those Commands i go over to recovery mode to install SU from there then restart and its rooted ?

ZaineJJ said:
Hi Ruben Craveiro is this the correct way ? i plugin usb cable into Predator 8 but it says its waiting for device is it the correct way ? after typing those Commands i go over to recovery mode to install SU from there then restart and its rooted ?
Click to expand...
Click to collapse
That means adb drivers arent corrently installed, but i can see you have the folder with adb, all you have to now is download this(drivers): http://dl.adbdriver.com/upload/adbdriver.zip
Extract and open the software eith the tablet plugged in, it should tell of drivers is installer properly or not, and if not you can install, after installing it should work on the cmd the commands..

LG Aristo 2 ROOT (LM-X210[Build- X210MA10i])

===============================================================================
TUTORIAL REVISED AND WRITTEN BY @parcek
===============================================================================
FURTHER UPDATED FOR ROOTING NOOBS: 10 Steps
Two Methods: Windows and Linux
Originally posted by @brad2192: https://forum.xda-developers.com/android/development/lg-aristo-2-root-t3746425
Credit to @tecknight for updated files: https://forum.xda-developers.com/showpost.php?p=76837384&postcount=2
@brad2192: Updated Tutorial due to people using TWRP (the original tutorial was released before TWRP was released for this device)
1) Backup all apps and data using LG Backup phone apps
2) Enable USB debugging and Unlock OEM. There are two methods in which you will to accomplish this:
First Method: Smartphone GUI
A) On your Lg Aristo 2 Smartphone go into General Tab (If in Tab View), If in list view, scroll down towards System section
"System Settings > About Phone > Software Information > Click on "Build Number" 10 times.
Now go to "System Settings > About Phone > Developer Options > Enable OEM unlock."
and also "System Settings > About Phone > Developer Options > Enable USB debugging."
Second Method: Windows Command Prompt or Linux Terminal:
Windows:
B) Click and drag "adb" file into command prompt and type "reboot bootloader" after it. Press enter.
Click and drag "fastboot" file into command prompt and type "flashing unlock" after it. Press enter.
Linux:
C)Type in your terminal "adb reboot bootloader" and press enter.
Type in your terminal "fastboot flashing unlock."
NOTE: Below has the information which will teach you how to download ADB and FASTBOOT.
3) Download the following:
Updated - TWRP
Updated - Magisk
(Add this file into your phone's SD Card.)
Updated - boot image
Update: Windows:
B)This is how you download ADB and FASTBOOT for Windows: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
4) Open Command Prompt. Then click and drag the adb file (from the latter download link a.k.a platform-tools) into command prompt then press space and type "reboot bootloader" after and then press enter OR power down phone and hold volume down while plugging in USB)
5) Open Command Prompt. Then click and drag the fastboot file (from the latter download link a.k.a platform-tools) into command prompt and then type "flash recovery" after it and then click and drag "newtwrp.img" into command prompt and press enter.)
6) Open Command Prompt. Then click and drag fastboot (from the latter download link a.k.a platform-tools) into command prompt and then type "flash boot" after it and then click and drag "bootimglistedabove.img" into the command prompt after and then press enter) then follow step 7).
Update: Linux:
C) Depending on kernel, for this sake we will use a debian based kernal.
This is how you download ADB and FASTBOOT for Linux: Open terminal and type: "Sudo apt-get install adb && sudo apt-get install fastboot"
4) Open terminal and type: adb reboot bootloader
5) Open terminal and type: fastboot flash recovery (and then click and drag newtwrp.img onto the terminal) and hit enter
6) Open terminal and type: fastboot flash boot (and then click and drag bootfilelistedabove.img onto the terminal) and hit enter
This applies towards both Windows and Linux: continuation after their last listed step written above.
Step 7) Remove battery from phone, in order to force a shut down.
8) Boot into Recovery-TWRP Mode.
How to boot into LG Aristo 2 TWRP Recovery:
a) The phone is off.
b) Hold the volume key and power key at the same time.
c) When the LG logo appears, let go of the power key (while still holding the volume down key) and then click and hold the power key once again.
d)You will be prompted to LG Aristo 2's stock recovery mode asking you if you are sure you would like to delete ur phone.
e) Go to the option "yes" and enter.
f) It will then warn you that can remove all data from your phone.
g) Go to the option "yes" and enter.
You will be in TWRP after this.
TWRP Mode:
9) In TWRP go to "Wipe > Format Data" and then type "yes" and confirm it. (Do not hit reboot, click back a few time and hit reboot > recovery)
10) In TWRP go to "Install > Select Storage" and select your SD Card. Then look for where you placed the "magisk" zip file. Install it.
Your phone is now rooted.
On TWRP menu: Reboot.
Restore your phone if you created an LG backup of your important files (like lets say contacts or applications).
-----------------------------------------------
If any mistakes were made and you phone becomes locked, here is how to go into download mode to repair your LG Aristo 2 into its default stock rom. Credit to @tecknight: https://forum.xda-developers.com/showpost.php?p=76837800&postcount=4
1) Power off phone.
2) connect usb to Lg Aristo 2 phone (without connecting the usb into the PC or laptop)
3) Hold volume up key and then connect USB into computer
4) download LG Bridge
5) detect phone
6) click on "Update Error Recovery"
Your LG Aristo 2 will be repaired and factory resetted.
-------------------------------------------------------------
What root means: In terms of PC language, Root means the superuser that has privileges to Add, Modify, and or Delete any kind of system files without prevention. Pretty much, it's like the actual Administrator account on a PC. Natively, whenever we buy a phone, it is as if to say, we are only using a guest account. Since the android OS is basically a Linux based computer (correct me if i am wrong) we can do anything we like... You want iOS emoji's on an android? A custom boot animation? Having root privileges allows you to go beyond your guest user restrictions because you then become the Admin.
Explaining the function of the provided Magisk app: It allows root privileges for programs intended for rooted phones.
There are other popular programs alternative of Magisk app, such as the SuperSU app: http://www.mediafire.com/file/2dljobq6yw93w76/UPDATE-SuperSU-v2.82-20170528234214.zip
--------------------------------
After being officially done setting up your rooted phone, make sure you disable OEM Unlock to avoid seeing the caution message before every boot.
--------------------------
How to backup your phone.
Also, using ADB, backup your phone.
Windows: Click and drag ADB file onto command prompt and paste " backup -apk -shared -all -f "C:\Users\UserName\Desktop\backupfilename.ab" "
Linux: Open terminal and type " adb backup -apk -shared -all -f "C:\Users\UserName\Desktop\backupfilename.ab" "
Update: For those who are encountering "Now unlock your phone and confirm operation" when typing the latter code, there is an alternative and much more easier and safer way to backup your phone.
Boot into TWRP and click on "backup" and then select what you would like to back up and then swipe to confirm the operation.
-----------------------------------------------------------------
Confirmed Successful rooting for LG Aristo 2 - June 2018
Thank You Brad and Tec!
Salam Aleykom.

You are a lifesaver my friend

Senorhamburgler said:
You are a lifesaver my friend
Click to expand...
Click to collapse
Brad I have a question, is there any way to get a custom ROM on this phone? If not how come? How does it all work?
And are you with Metro PCS as well? What apps can a safely delete to get this phone as close to a stock version of android as I can? Can I seriously just wipe out EVERY metro app? Hows your phone functioning?

tribal1209 said:
Brad I have a question, is there any way to get a custom ROM on this phone? If not how come? How does it all work?
And are you with Metro PCS as well? What apps can a safely delete to get this phone as close to a stock version of android as I can? Can I seriously just wipe out EVERY metro app? Hows your phone functioning?
Click to expand...
Click to collapse
Until there is a custom recovery built, we won't have custom roms. Dont wipe out every metro app. Anything you arent sure about, look up, or just freeze the app and test results. My phone is fine except SuperSU wont work properly due to the binary being occupied, but this is the best we have so far. I debloated no problem.

tribal1209 said:
Brad I have a question, is there any way to get a custom ROM on this phone? If not how come? How does it all work?
And are you with Metro PCS as well? What apps can a safely delete to get this phone as close to a stock version of android as I can? Can I seriously just wipe out EVERY metro app? Hows your phone functioning?
Click to expand...
Click to collapse
Senorhamburgler said:
Until there is a custom recovery built, we won't have custom roms. Dont wipe out every metro app. Anything you arent sure about, look up, or just freeze the app and test results. My phone is fine except SuperSU wont work properly due to the binary being occupied, but this is the best we have so far. I debloated no problem.
Click to expand...
Click to collapse
Root is the only thing needed, not a custom recovery. Apps like Magisk Manager can flash custom images. The reason there is no ROMs built for this device, I can tell you in my opinion there is no need for a Custom ROM. Magisk Manager has plenty of customizations available as well as many other root apps. Basically, custom recoveries are obsolete, it is not needed for gaining root access nor flashing files. Magisk can do it as well as Flashfire.

I need help.... Abd is not functioning it states "the term abd is not recognised as the nane of a cmdlet, function, scrip file of operable program."
Does not exist in current location.... Windows PowerShell does not load conmands by default...

MinaSaotome said:
I need help.... Abd is not functioning it states "the term abd is not recognised as the nane of a cmdlet, function, scrip file of operable program."
Does not exist in current location.... Windows PowerShell does not load conmands by default...
Click to expand...
Click to collapse
Hey man, I would press the Windows Key+R and type" "cmd"
Then, as long as your adb is located at C:\adb type: "cd C:\adb"
Then use adb, I hate how Windows 10 forces it on users!

Hey, I am so sorry to bother you but when I enter in the fourth step of your tutorial, it tells me "flash boot" command doesn't exist. Is there something I'm doing wrong?
---------- Post added at 01:15 AM ---------- Previous post was at 01:01 AM ----------
4btn said:
Hey, I am so sorry to bother you but when I enter in the fourth step of your tutorial, it tells me "flash boot" command doesn't exist. Is there something I'm doing wrong?
Click to expand...
Click to collapse
Okay, after messing around with it a few, I found that once it goes off into fastboot... my computer can't recognize it anymore?

brad2192 said:
Hey guys, spent a few hours figuring out how to root. Pretty Simple!
1) Enable Developer Options, USB Debugging & OEM Unlock
2) Reboot to Fastboot Mode (Using ADB via PC type: adb reboot bootloader)
3) Add root_boot.img into your adb folder
4) In ADB type: fastboot flash boot root_boot.img
5) After flash successful, type: fastboot reboot
6) Install Magisk Manager App
For those skeptical, proof of root here.
X-210 Stock .KDZ Backup HERE (Should not be needed.)
Click to expand...
Click to collapse
Do I need to unlock the bootloader first? I have it rebooted into fastboot and it's giving me instructions to do that, but won't let me push the boot image. If I do need to unlock it, does it wipe my device?

tge101 said:
Do I need to unlock the bootloader first? I have it rebooted into fastboot and it's giving me instructions to do that, but won't let me push the boot image. If I do need to unlock it, does it wipe my device?
Click to expand...
Click to collapse
Yes, that is what OEM unlock means. In doing so you do need to unlock the bootloader.

brad2192 said:
Yes, that is what OEM unlock means. In doing so you do need to unlock the bootloader.
Click to expand...
Click to collapse
Just wanted to make sure but does it wipe it?

tge101 said:
Just wanted to make sure but does it wipe it?
Click to expand...
Click to collapse
Yes, when you use "fastboot oem unlock" it unfortunately erases all data. One of our forum members is working on a TWRP at the moment that might be available today. You could wait to do this so you can create a backup.

brad2192 said:
Yes, when you use "fastboot oem unlock" it unfortunately erases all data. One of our forum members is working on a TWRP at the moment that might be available today. You could wait to do this so you can create a backup.
Click to expand...
Click to collapse
That'd be cool. But, wouldn't the bootloader still need to be unlocked for me to flash TWRP?

tge101 said:
That'd be cool. But, wouldn't the bootloader still need to be unlocked for me to flash TWRP?
Click to expand...
Click to collapse
I'm an idiot, yes LOL. Sorry, just got to work and I am tired you are correct. So, if you would like I suggest just using my tutorial. I believe there is ways of using LG backup to save most of your user data.

brad2192 said:
I'm an idiot, yes LOL. Sorry, just got to work and I am tired you are correct. So, if you would like I suggest just using my tutorial. I believe there is ways of using LG backup to save most of your user data.
Click to expand...
Click to collapse
All good, if I lose it I lose it. Is there a thread for the TWRP development?

I posted a test twrp on my blog for aristo 2

cannot open root_boot.img
hey maybe someone can help me out
previously already unlocked the bootloader on the phone so i skipped that step but i keep getting the error that it can not open root_boot.img
downloaded the file and moved into users/appdata/local/android/sdk/platform-tools
thats where adb.exe so i figured that is the adb folder maybe yes or no
could anyone help me out
greatly appreciate it

tge101 said:
All good, if I lose it I lose it. Is there a thread for the TWRP development?
Click to expand...
Click to collapse
Update: TWRP HERE

TJ-yesthelegend said:
hey maybe someone can help me out
previously already unlocked the bootloader on the phone so i skipped that step but i keep getting the error that it can not open root_boot.img
downloaded the file and moved into users/appdata/local/android/sdk/platform-tools
thats where adb.exe so i figured that is the adb folder maybe yes or no
could anyone help me out
greatly appreciate it
Click to expand...
Click to collapse
What are you typing into ADB to get that error?

Do you have to de-encrypt the phone for root? I am thinking of getting an Aristo2, currently using the MotoE4 (which I hate!), and rooting that requires de-encryption (I love encryption!). This is the MetroPCS version your talking about? Thank you...