[ROM][SM-J100H] MIUI V6 Smooth|Faster|Ota|MultiLanguage - Android General

Hi all....
The project is MIUI-V7 ROM. This ROM not buid from source but I port from other device that is J100H I use CM11 as Base ROM.
NOTE :
This MIUI7 ROM still have bug/issue. If you get bug, youre report is always will be appreciated BUT YOU MUST GIVE THE LOGCAT OF THE BUGS. So enjoy this project and Thank you very much for many people which always help me to fix many bug from this MIUI7 ROM. And for you are which use this project
* I am not responsible for bricked devices, dead SD cards,
* Please do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*What's working
*booting " first boot take 3-5 mins
*Wifi (connection,, tethering, etc...)
*bluetooth
*RIL (Calls, SMS, mobile data for singel SIM) "i dont test mobile data" " note: ril working after 2 min every restart"
*Storage (both internal and external)
*ART (but don't use this as daily because some apps could FC due to compatibility)
*MTP storage (both internal and external) "need more test on pc"
*Offline charging
*zRAM (compressed-RAM swap)
*Tethering (USB, Wifi, Bluetooth) "not tested"
*Hardware rendering
*Camera
*Torch (flashlight)
*GPS "not tested"
*Video codecs
*Sound and headphone
*Sound recording
*Hardware keys...
*all sensors
*Brightness bar
*Bugs
*Ril only single sim work. " ril working after 2 min every restart"
*some crash Options in settings
*some dialog choices very transparent
*let me know
Credit :
Port by @ajat
First time installing Miui7 to your Galaxy Core Prime (SM-G360H), or coming from another ROM:
Install ClockworkMod Recovery (OR TWRP)
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using ClockworkMod Recovery (OR TWRP)
*NOTE: If you're running TWRP recovery, go to Settings >> "Use rm -rf instead of formatting" before wiping anything, else you have to wait 20 mins due to some weird bugs of our eMMC (maybe).
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod 11
Version Information
Status: test version
Current Beta Version:
Beta Release Date: 2017-2-25
Created 2017-2-25
Last Updated 2017-03-8
download link
mode edit - link removed
NOTE :
after install rom, in sable signature first

this is MIUI 7 SM-J100H ROM, I WROTE SORRY PLEASE

thread closed until the download links will be available

Related

[ROM][UNOFFICIAL] CyanogenMod 9 for Huawei MSM7225 Devices [27072013 Final U8160/80]

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
U8160/80 27072013 Final
U8150 01052013
Mirror U8160/80 02032013
Mirror U8150 02032013
U8150 Melfas Touch Fix
Google Apps alias GAPPS:
07052013
Mirror 07052013
Old Versions
ROMS:
U8160/80 01052013
U8160/80 23072013
Latest Speed Build:
U8120/10/00
U8350
Latest Complete Build (Old 25012013) [DISCONTINUED]:
U8160/80
U8150
U8120/10/00
HotFix (only for 02032013)
U8150 02032013
GAPPS 12012013
U8160/80 Perf 02032013
U8150 Speed 02032013
U8160/80 Speed 02032013
U8160/80 Speed 25012013
U8150 Speed 25012013
U8120/10/00 Speed 25012013
U8120/10/00 12012013
U8160/80 19012013
U8150 24122012
U8160/80 12012013
U8160/80 06122012
U8120/10/00 07122012
Mirror Folder
Keyboard and S2E Patch U81xx
Google Apps:
06122012
Installation
- First time flashing CM9 to your Device (or coming from another ROM)?
Root Your Device and install ClockWorkMod Recovery/Amon_RA Recovery
Reboot into recovery using Volume-Up + Power
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from CM7/CM9?
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from another CM9 Build? (Wipe Required if upgrading from older release than 23072013)
Do a Nandroid Backup! (Optional)
Wipe Cache and Dalvik-Cache
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
Note: Is always Recommended to do WIPE, or you can have problems (not always).
Reporting Bugs
You are allowed to report bugs only at the u81xxcm91 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat (adb logcat -d > logcat.txt) right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Model:
ROM version:
ROM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup or other backup app:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Attach a Logcat of the issue in plain text.
What steps will reproduce the problem?
1.
2.
3.
Failure to fill out the above template or attach a log will result in this
issue being closed immediately
Changelog
Changelog is available here
Recoveries (tested and working for all devices, U8160_80 are my builds)
For RZ Recovery Features see here
Source (to be completed)
People who made this possible:
Alberto96
LeoDeos (Alberto96's Recognized Themer )
psyke83 (Thanks for Kernel, Binaries, Source, Time Spent and much more)
tilal6991 and aorth for U8150 Stuff and much more (sorry for delay)
slymobi and joilaroi for U8120/10/00 Stuff and much more (sorry for delay)
AC1953 (Thanks for fantastic audio drivers, ideas and much more)
CyanogenMod Team
Others
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Alberto96 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (Ice Cream Sandwich), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Latest Version: In Upload
Google Apps: In Upload
Installation
- First time flashing CM9 to your Huawei U81xx Device (or coming from another ROM)?
Root Your Device and install ClockWorkMod Recovery/Amon_RA Recovery
Reboot into recovery using Volume-Up + Power
Do a Nandroid Backup! (Opional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from CM7/CM9?
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from another CM9 Build?
Do a Nandroid Backup! (Optional)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
Note: Is always Recommended to do WIPE, or you can have problems (not always).
Alberto96's Mods
JB Style (till full working CM10 build is out)
Tweaked to the max
LDPI Resized
OTA Updater Included
Naked Browser Included (for smooth web browsing)
No-Frills CPU Control Included
Notes and StopWatch Included (essentials app that in CM9 are not included)
Modded QuickPic instead of Froyo Limited Gallery
Slimmed
Reporting Bugs
You are allowed to report bugs only at the u81xxcm91 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Model:
ROM version:
ROM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup or other backup app:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Attach a Logcat of the issue in plain text.
What steps will reproduce the problem?
1.
2.
3.
Failure to fill out the above template or attach a log will result in this
issue being closed immediately
Changelog
Changelog is available here
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Click to expand...
Click to collapse
Haha nice, was waiting for this....
Waiting for download...
Nice job waiting for upload!
Sent from my Vodafone 858 using xda premium
Waiting for today afternoon install new rom
ready for test on 8110 but still link in upload )
Only U8160/80 version is ready, U8150 and U8120/10/00 needs work and testing.
I'm uploading rom now as i had some problems.
Inviato dal mio GT-I9000 con Tapatalk 2
U8160/80 ROM is UP Light, very light gapps WIP
Where is the gapps link?
Sent from my Vodafone 858 using xda premium
Thanks
nice !:good: i can do testing for u8150 for cm9.1.
polac said:
Where is the gapps link?
Sent from my Vodafone 858 using xda premium
Click to expand...
Click to collapse
Is WIP, near finished
mitulvohra said:
nice !:good: i can do testing for u8150 for cm9.1.
Click to expand...
Click to collapse
Ok, i will contact you via PM
GAPPS Package is uploaded. Enjoy
...
When 8150 version will be ready for testing?
Thanks.
When i finish it and my tester gives me positive result.
Nice Job
Very smooth, better than other cm9.1 roms. (usb mass storage isnt working )
Check PC, usb mass storage is full working, i ultra tested it xD
Alberto,
I appreciate you putting me in the credits, but your first post is still misleading, as it suggests that you have built this ROM from source. In fact, you are not building from source - it is a binary modification of my most recent CM9 build (which I really have built from source).
Another (small, but annoying) thing you have done is changed the authorship of scripts that are clearly not your own. For example, your "02HuaweiProps" script says "by Alberto96", but in fact it is an unmodified version of my "02setuphardware" script, which you can see here: https://github.com/CyanogenMod/andr...ngerbread/prebuilt/etc/init.d/02setuphardware. It is generally not good behaviour to try and pass off other people's work as your own.
Yes is true, i changed it (script) as before i mod it adding some changes (for u8180 touch and differences in camera), but i changed them differently and i leave my credits in scripts. Sorry, i will fix it in next version. I will add also this alert in first post. Thanks for the alert
UPDATE: Fixed for Future Release
U8120/10/00 Version almost ready, only need testing on bluetooth and is ok All is new now, audio module, graphic initializer,.... all! Works smooth and without problems. Link will appear on thread when rom test is succesfully. U8150 rom needs still to be tested.
Alberto96 said:
U8120/10/00 Version almost ready, only need testing on bluetooth and is ok All is new now, audio module, graphic initializer,.... all! Works smooth and without problems. Link will appear on thread when rom test is succesfully. U8150 rom needs still to be tested.
Click to expand...
Click to collapse
general impressions are good for U8110
- sound is a little weaker but can survive
- wifi, bluetooth, camera works
the biggest problem is the calibration screen,the corners and the top and bottom of the screen is very difficult
thanks for your hard work for us

[ROM]Unofficial Cyanogenmod 12 Nightly for Redm 2

Presenting CM12 Nightly ROM for Xiaomi Redmi 2
Contriutors:
tenfar (R guru),
zhaochengw (z large),
xuefy (Big Star),
suky,
ivan19871002 (autumn wind),
cofface, lwanggg (wood male),
dianlujitao, oubeichen,
mxc2002
scyhost
yiroms
Important Note :
Your warranty is now voided.
I am not responsible for Bricked Devices, Dead SD Cards, World War 3 or You getting late on your date because the alarm app failed.
Please do some research if you have any concerns about flashing ROMs or any other doubts!
You are choosing to make these modifications, and if you point the finger at me for messing up your device, i will laugh at you.
P.S. But you can always get warranty back by flashing stock MIUI ROM.
Whats Working:
1, wifi: (MAC address is not fixed)
2. Bluetooth: (tested Bluetooth headset, transfer files, Bluetooth sharing networks, etc.)
3, the signal / 3G: signal , mobile data is not normal
4, charge:
5, GPS:
6. Camera:
7, the display driver (gpu etc.):
8, selinux:
9, sound driver (mic and speak, etc.):
10. Touch driver:
11, OTG:
12, WFD (Wireless Display): Unknown (to be tested wfd TV function)
13, mtp usb drives, etc:
14, shock:
15, breathing light: (you can set the color and length of breathing, support calls flash)
16, FM radio:
Bugs:
3G Data
WIFI MAC address is not fixed
the sensor does not work
the mobile data not working
Download Link:
ROM:https://drive.google.com/file/d/0B588xVmwf51XdTF5cnNMekpKSU0/view?usp=sharing
GAPPS:https://basketbuild.com/filedl/gapps?dl=gapps-lp-20150222-signed.zip
Pre-Requirements (Reading It Beforehand):
Please backup the original system data (contacts, SMS, application data, etc.).
Please backup files to another location as the built-in storage (external storage or individual PC).
Custom Recovery Installed On Your Device.
Enabled Usb Debugging.
Phone Battery Charged Above 70% At Least.
Copy CM11 and Kitkat based GApps zips to your internal SDCard
Instructions (How To Flash/Install):
Boot into Recovery.
Clear Data.
Clear Cache.
Clear Dalvik Cache.
Flash CM12 ROM zip file from from internal SDCard.
Flash GApps zip file from internal SDCard.
Clear Cache and Clear Dalvik Cache.
Reboot.
XDA:DevDB Information
Cyanogenmod 12.0, ROM for all devices (see above for details)
Contributors
Ankurthe master, tenfar (R guru), zhaochengw (z large), xuefy (Big Star), suky, ivan19871002 (autumn wind), cofface, lwanggg (wood male), dianlujitao, oubeichen, mxc2002
Source Code: yirom.com/rom/index/13153
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Rooted Redmi 2 with CWM or TWRP
Version Information
Status: Nightly
Beta Release Date: 2015-04-09
Created 2015-04-09
Last Updated 2015-04-09

[GearCM][i9500][6.0.x] Optimized CyanogenMod 13.0 for Samsung Galaxy S4 [20161203]

Use this thread =>http://goo.gl/6kTvJu for questions or discussions.
Only Bug Reports & Feedbacks are allowed here. Penalty: Post Removal by Moderators​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
ROM Downloads
All not-working RenderServer hosted files can be found here: https://androidfilehost.com/user/?w=settings-dev-files&flid=50874
<< Stable >>
20161203 Build: https://www.androidfilehost.com/?fid=601300970940399905
<< Misc. (Modem & Recovery) >>
GearRecovery (based on TWRP Recovery) 20160220: https://www.androidfilehost.com/?fid=24421527759883765 <= Highly Recommended
I9500XXUHOD4 LL Modem: https://basketbuild.com/filedl/devs...s And Bootloaders/I9500-XXUHOD4-MODEM_CWM.zip <= Russian Modem, Recommended
I9500DDUHOA1 LL Modem: http://forum.xda-developers.com/attachment.php?attachmentid=3165311&d=1423927137 <= Indian Modem, use it if you're experiencing problems with Russian variant
Previous Releases:
20160828 Build: https://www.androidfilehost.com/?fid=24591000424960632
20160711 Build: https://www.androidfilehost.com/?fid=24591000424946159
20160710 Build: https://www.androidfilehost.com/?fid=24591000424945760
GearRecovery (based on TWRP Recovery) 20151003: https://www.androidfilehost.com/?fid=24052804347828835 <= Highly Recommended
<< Beta >>
20160502 Build: https://www.androidfilehost.com/?fid=24531172553916653
<< Alpha >>
20160101 Build: https://www.androidfilehost.com/?fid=24352994023703667
Google Apps (add-on)
http://opengapps.org/ <== Recommended <> Micro/Mini Modular Package. Do not choose Stock
Installation
3-button-combo = "Volume Up/+" + "Home/Center" + "Power/Lock"
- First time flashing GearCM 13.0 to your Galaxy S4 (or coming from TouchWiz/Stock Based ROMs)?
Root your device and install latest GearRecovery
Reboot into Recovery using 3-button-combo
Do a Backup!
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from internal/external sdcard
Optionally install Google Addon
Done! You can now reboot the phone to enjoy the rom
- Upgrading from Official CM10.2/CM11/CM12/CM12.1 or GearCM 11/12/12.1?
Reboot into Recovery using 3-button-combo
Do a Backup!
Install latest GearRecovery
Reboot into new Recovery using 3-button-combo (if needed)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)
Install the ROM from internal/external sdcard
Optionally install the Google Addon
Done! You can now reboot the phone to enjoy the rom
- Upgrading from another build of GearCM 13.0?
Reboot into Recovery using 3-button-combo
Do a Backup!
Install latest GearRecovery
Reboot into new Recovery using 3-button-combo (if needed)
Install the ROM from internal/external sdcard
WIPE Dalvik/ART Cache (wipe cache partition + wipe dalvik cache)
Done! You can now reboot the phone to enjoy the rom
Known Issues (regarding latest available build)
Please do not report bugs if it is already listen in the list of known issues
Audio HAL isn't working correctly, causing VOIP issues, HDMI audio instabilities and mixer paths conflicts
STK Toolkit isn't working yet, SMSs aren't properly sent (RIL issue)
SELinux policies are almost complete, with just some minor missing rules
Wireless Display (or Miracast if you like) stream is corrupted, buffer issues
Adoptable Storage isn't stable, crashes while encrypting the external storage (Kernel Panic). Read Here: http://goo.gl/0w6DPt
Device Encryption isn't stable for the same issue that affects Adoptable Storage
Reporting Bugs
First of all, read this: http://www.chiark.greenend.org.uk/~sgtatham/bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow. Note: If you can provide the latest night/build that the bug didn't exist, it would greatly help in tracking down what caused it.
Code:
What is your--
Phone model:
Radio (baseband) version:
GearCM version:
GearCM download url:
Google Apps version:
Did you--
wipe data/factory reset:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance Settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
Changelog
20161203:
Updated CM Sources
All missing features (that i have accidentally removed in the previous build) are back
Some Audio HAL stability improvements
Removed that dangerous Soft Reboot option
KERNEL: some updates here and there
Check my GearCM Github for more information
Previous Releases:
20160828:
Updated CM Sources (nice improvements are here)
Added new features for Screen Power Saving, play with LiveDisplay settings!
Enabled HDMI CEC support
Wireless Display & Screen Recording should work better now, but nothing guaranteed
20160711:
Updated CM Sources
Improved built-in Camera Latency with Flashlight
KERNEL: Fixed Battery Capacity
20160710:
Switched to Stable Release
Updated CM Sources
Fixed Wireless Display (even if not completely)
Fixed random Graphics Glitches
Fixed WiFi issues
Fixed Battery Drain
Fixed Camera Instabilities (no more crashes)
SELinux is now enabled, but on permissive mode.
DRM-dependent apps should be working fine now
Maxed Out ART Runtime Performance
OTA Updates are back, but with download links (AndroidFileHost limit)
Adoptable Storage is now working, but unstable. "Known Issues" explains why
Optimized Network Performance (WiFI & 3G)
Restored Android Marshmallow Doze Mode (power-saving)
Using latest INU OK2 proprietaries
KERNEL: switched to a whole new, and stabler, kernel
KERNEL: using latest INU OK2 kernel sources
KERNEL: enabled all features that might be required by some apps
20160502:
No Changelog provided yet, will be added soon.
20160101:
First Release (Alpha)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[GearCM][i9500][6.0.x] Optimized CyanogenMod 13.0 for Samsung Galaxy S4, ROM for the Samsung Galaxy S4
Contributors
Alberto96, NBruderman, intervigil, codeworkx
Source Code: https://github.com/GearCM
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest Modem, TWRP or GearRecovery, and a working brain to manage GearCM features
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 20161203
Stable Release Date: 2016-12-03
Current Beta Version: 20160502
Beta Release Date: 2016-05-02
Created 2016-01-01
Last Updated 2016-12-03
Reserved
Important! Read this before any other question/doubt.​​​
If someone doesn't like my ROMs, or doesn't like me, or even better, doesn't want to like/appreciate my works, then you can just go ahead and use/follow someone else works. Easy, not against XDA rules, and smart.
I'm not here for "fame" (or "glory" as someone in this forum said) unlike someone else, neither this is my job. I'm working on this device just because TW is far than usable (at least for me) on every Samsung device, not because someone else requested me to do it.
Click to expand...
Click to collapse
Differences between GearCM (Optimized CyanogenMod) and Official CyanogenMod (NIGHTLY):​
Degrated Shadow said:
Enough of those dumb questions..
The Official CM rom is maintained by @Alberto96 and @intervigil
He makes the very recent changes here relating to performance...which are then in time pushed (even if partially) to CM Official Sources. The kernel is different because it has seLinux disabled and few minor tweaks you might not even notice...this GearCM ROM will have more performance. But CM will have their updated base changes which are included here with each update.
What I mean is you probably wont even notice what's different in terms of user interface. GearCM will have more performance. Official CM will have updated sources. But it will include GearCM's changes in time as @Alberto96 pushes them to CM
You can decide by a simple choice..more performance and not-nightly updated sources or similar/worse performance (improving with nightly updates) with updated sources. I would choose GearCM because of the reasons i mentioned above. Do what you will...and let this be a note to everybody who ask this again and again and again. Don't spam the thread with same question in every alternate page...because there are other people who might have different problems they need to ask. Read at least 15 previous pages and the first post Changelog before asking the question. Reading most of the times will give you a solution and if not most of the info you will read will help you anyway.
Click to expand...
Click to collapse
Reserved
FAQ (Frequently asked questions)​
If there a procedure that i should follow in order to have a clean base to start from?
Yes, follow this procedure and you shouldn't have any issue.
Flash latest Stock ROM Odin package | http://www.sammobile.com/firmwares/download/55812/I9500XXUHOH7_I9500MBCHOF1_MBC | using latest Odin3 Flasher | http://forum.xda-developers.com/attachment.php?attachmentid=3446301&d=1440131361 | and Standard (not Chinese) .pit file. | http://forum.xda-developers.com/attachment.php?attachmentid=2343320&d=1382462885 |
After First Boot, Shutdown your device and Boot into recovery mode using 3 buttons combo (Volume +, Home, Power)
Wipe Data/Factory Reset using Volume Keys and Power Button (on Stock Recovery)
Flash latest TWRP 2.8.7.0 | https://dl.twrp.me/i9500/twrp-2.8.7.0-i9500.img.tar | using Odin3 | previously linked | (Untick Auto Reboot to avoid any issue)
Shutdown your device (pull off your battery)
Boot into recovery mode using 3 buttons combo | Volume +, Home, Power | (TWRP will boot now)
Flash latest GearRecovery (on TWRP)
Reboot into recovery mode using TWRP on-screen buttons | Home => Reboot => Recovery | (GearRecovery will boot now)
Clean completely your device (Format Data and Wipe All Partitions)
Reboot into recovery mode as did before (GearRecovery will boot again now)
Flash latest GearCM ROM
Home => Reboot => System
Where is "Developer Options" category?
To activate 'Developer Options' category in Settings you need to tap 7 times on 'Build number' located into Settings -> About Phone.
What can i do to fix VOIP audio calls?
There's not a real fix yet, so i found this useful workaround that could help you.
If you need to make a VOIP call:
1) Play something using stock music player (also third-party music players SHOULD be fine)
2) Do not pause audio playback
3) Make a call using your preferred VOIP app.
Or you can just use a Wired Headphone/Headset | BT Headphone/Headset.
This workaround should work also for incoming VOIP calls.
How can i solve problems with Hebrew language?
Go to "Developer Options" in Settings and check "Force RTL layout direction".
What can i do to reduce the "echo effect" while in-call?
Try to reduce in-call earpiece volume (if possible). Shouldn't be required on latest builds.
I'm having problems with battery life, what can i do?
1) Use "Greenify" to hibernate all apps with a "little cloud + 'Gcm' word inside" on the right of each app's name. Donation version is recommended because it allows deeper hibernation of apps
2) Disable "Location" or set it to mode "Battery Saving" (Settings -> Location)
3) Make sure that your 2G/3G mobile network signal level isn't always low or unstable
4) Deny "Wake Up" and "Keep Awake" permissions to Google and third-party apps. (Settings -> Privacy -> Privacy Guard -> Press menu button and check "Show built-in apps" -> Press menu button again and go to Advanced -> Horizontal Scroll to Device)
5) Disable "Sync" or sync only useful stuff like Contacts
6) Disable "Auto-rotate screen" (Settings -> Display & lights -> Rotation)
7) Use one of the latest Modem/Baseband listed on first post.
8) Disable Ambient Display
9) Install Xposed Framework and configure Amplify
If this isn't enough then replace your battery and/or reduce your phone usage. :silly:
Is GearCM OTA supported?
Yes (Since 20150707 Build)
Why is my phone over-heating while playing heavy-games or running heavy-apps?
Use a bit your brain to explain why. High CPU and GPU usage = high heat production. Your phone will automatically throttle CPU when needed so don't worry, it is safe and normal.
Can I use another kernel instead of the one included in the zip?
No. Only use the included kernel for 100% compatibility, bug reports with non-standard kernel will be ignored.
Can i disable S-View cover features (lock/unlock)?
Not yet.
*** IR Remote app isn't working anymore/was working on previous builds/causes my phone to crash, what can i do?
Contact *** IR Remote app developer.
woooww .. new topic .. good luck
30 Minutes left to the end of the upload (and don't worry, this isn't a placeholder)
Known Bugs:
- Camera
- Compass (untested)
- Synapse (not supported)
- OTA Updates (support will be added later)
GearCM 13 Alpha Build is up!
Enjoy
Alberto96 said:
GearCM 13 Alpha Build is up!
Enjoy
Click to expand...
Click to collapse
Thank you for your effort, downloading now , hope camera is fixed soon
Great job man thank you downloading now
can i dirty flash or must i clean install @Alberto96?
Bilal_503 said:
can i dirty flash or must i clean install @Alberto96?
Click to expand...
Click to collapse
You know that i'll always answer with two simple words: "CLEAN FLASH".
Thanks Alberto..
YOU ARE AMAZING!!!
Alberto96 said:
30 Minutes left to the end of the upload (and don't worry, this isn't a placeholder)
Known Bugs:
- Camera
- Compass (untested)
- Synapse (not supported)
- OTA Updates (support will be added later)
Click to expand...
Click to collapse
The Synapse 0.44 added support to Android M.
---------- Post added at 10:15 PM ---------- Previous post was at 10:14 PM ----------
Alberto96 said:
GearCM 13 Alpha Build is up!
Enjoy
Click to expand...
Click to collapse
Best New Year's gift!
treborbr said:
The Synapse 0.44 added support to Android M.
Click to expand...
Click to collapse
CM13 isn't using anymore Busybox so it isn't compatible for real. I need to compare Busybox & Toybox to check the differences.
I download and I've tested. sound problem resolved but could be better. not disturbin
thanks alberto. I hope to be much more beautiful
Downloading and gonna dual boot! Thanks a lot @Alberto96
Wow, that's what I had been looking for in the past months. Thank you for your hard work, and happy new year! :laugh:
Thanks man, I have been waiting for this for so long.
Does it support f2fs ?
Just to make sure there is no compatibility issues..
---------- Post added at 01:03 AM ---------- Previous post was at 12:27 AM ----------
After testing for 2 ours.. I can say there are no major bugs in the rom
Everything is working except for camera and it's much smoother than cm12.1
Is this latest build booting?
Sent from my GT-I9500 using Tapatalk
Mo0s said:
Is this latest build booting?
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Yes, indeed.. That's why this thread..!
Sent from my GT-I9500 using Tapatalk

[ROM][5.1.1][SM-J100H] CyanogenMod 12.1 for Samsung Galaxy SM-J100H

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
???
always says SETUP WIZARD HAS STOPPED
- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.
Lord87 said:
- works stable
- issues with WiFi and Bluetooth. WiFi cannot connect - you have to enter the same password multiple times when connecting for the first time. Then it keeps failing to connect from time to time
- more laggy than stock rom and resurrection remix
- installation is very straightforward
Thanks for sharing this rom. Lots of good work.
Click to expand...
Click to collapse
Try this https://androidfilehost.com/user/?w=settings-dev-files&flid=205876
CyanogenMod 12.1 for SM-J100H with dual SIMs
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.
c0mpus3rvef said:
Thanks for posting this ROM, gave me a chance to test in on a SM-J100H with dual sims: flashed the ROM, the fix and then gapps. Was thinking not to have gapps but an app was requiring Google Play services.
Setup Wizard stopped several times after reboot, worked around it by restarting the phone. Mobile connection was unstable for both sims and kept dropping, overall performance was slow, especially when in Settings. Not sure if RAM on this phones can be upgraded, mentioning it since free memory was scarce.
As noted by another user WIFI setup had to be repeated for it to stick, good work for keeping it simple thu.
Click to expand...
Click to collapse
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A
Erwin Abs said:
yeah i think ram 512 for now is not good especially with gapps that are constantly updating, i think you should buy a new handphone
Let's go join to Redmi 5A
Click to expand...
Click to collapse
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.
c0mpus3rvef said:
Totally agreed, it has limitations due to small RAM and older technology. am using my SM-J100H learning about behavior of various custom ROMs. Please bear with me, one observation when using Bluetooth, it said SM-G360H, perhaps not significant. was able to transfer files and use an app that required Bluetooth connection. Just curious if this could cause slow response time. Thanks again.
Click to expand...
Click to collapse
Will it work with the Sm-j100FN?
ugur30 said:
Will it work with the Sm-j100FN?
Click to expand...
Click to collapse
totally different hardware so NOPE
Donwload
Erwin Abs said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.1 (LP), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Wifi (connection, tethering, etc)
Bluetooth (need quick patches in download link)
Camera, video codecs
RIL (Calls, SMS, mobile data)
Storage (both internal and external)
MTP storage (both internal and external)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Sound recording
Torch (flashlight)
BUGS/Not working:
Laggy recorded videos. In this case, use MX Player, choose SW codecs when you play these videos, they will become normal
Switching to other fonts will get bootloops after restart. In this case, if you use TWRP recovery, go to File Manager >> delete "themes" from /data/system would help you escape this without factory reset
First time installing CyanogenMod 12.1 to your Galaxy , or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended)
Quote:
DOWNLOADS:
ROM: Link
CHANGELOG
Code:
- 2016/06/25
+ Initial release, ported from Galaxy V's CM12.1
- 2016/06/27
+ Switched to built-from-source, no more portings
+ Fixed nearly all problem, except fonts
+ Underclocked to 1,2GHz for stable usage
+ Enable multi-threaded dex2oat >> Faster app installation
+ Fixed installation for some apps (FB, etc...)
Want some screenies? Get them from Screenshot tab
XDAevDB Information
CyanogenMod 12.1, ROM for the Samsung Galaxy
Contributors
Erwin Abs
Source Code: https://github.com/jnkcode/android_kernel_samsung_j13g/tree/cm-12.1
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2016-06-27
Click to expand...
Click to collapse
A Bugs / Or My phone?
Device : J100H
Bugs (maybe) : Cant Connect To A Wifi (It Saying Cant Connect On This Network)
I Dont Know Its My Phone Or The ROM Sooo? Help
1.Thank You For The Information
2. I Already Know It,After Installing Lineage OS 14.1 (Nougat,Still Didn't Know IS THe ROM Ported Or Not But THe Wifi Works So I Used It (And Installing Family Link Bc That Phone I Will GIve It To My Lil Bro)
3.It Slow af

[Q][TREBLE VENDOR][J4CORELTE][PROJECT TREBLE VENDOR FOR J4CORELTE V2]

/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Hi everyone i want to share a gsi vendor image that boots most Q and P roms for the samsung galaxy j4 core.
How to install:
reboot to twrp go to format data type yes *this will format all your data*
go back to wipe and select system,vendor,cache,data and dalvik then swipe to wipe
go to install click on install image select the gsi image file then swipe to flash
now select install zip and click on the vendor image you have downloaded and swipe to flash
finally you can flash gapps if your gsi doesn't include them *note: if you dont have enough space to install gapps to to wipe select system and select repair or change file system click on resize system then swipe to reisze*
and if you are into rooting flash magisk zip file
note try to not install gsi roms that aren't over 1.2gb lineageos 17.1 and dotos are prefered
BUGS:
none
What works:
-boots
-offline charging
-sound
-wifi
-gps
-bluetooth
-mtp
-RIL
if you want to report a bug be sure to include logcat
After this thread started to gain downloads, i decided pushed another update with improved peformance!
Download:
V2 Google drive: https://drive.google.com/file/d/1z-OrGTjv9HD9SL2j30EYyUA__xjmhIaR/view?usp=sharing
V1 Google drive: https://drive.google.com/file/d/14-XNmD_19Mt-dFSReBZk8luoeY2ZoD9r/view?usp=sharing
Credits:
@leohiper10 for the sources and allowing me to use his vendor image from his lineageos 16 build (doesnt use his vendor build anymore with V2).
myself for taking my time to test and fix the bugs
XDA: DevDB Information
Fggevhy Vendor for galaxy j4 core
ROM OS Version: 10 Q
ROM Kernel: Linux 3.x
ROM Firmware Required: latest bootloader and dtbo
Based On: Project Treble
Version Information
Status: Stable
Current Stable Version: V2.0
Current Beta Version: V2.0
Stable Release Date: 2021-11-08
Created 2021-09-20
Last Updated 2021-11-08
happy flashing!
Forgot to mention that the gsi image must be arm Aonly i will add that later
Changelog: 08/11/2021
-.img format instead of flashable zip
-Set screen density to 411
-Fixed pretty much all bugs in the older release
-Fixed Unknown baseband bug and unkown imei with old version on j410f
-Better peformance!
Changelog: 22/10/2021
-baked custom kernel onto it
-fixed call audio
-fixed crashing issue of qcrilmsg (responsable for ril)
-fixed wifi issue on j410F
-fixed dual sim on J410F/DS
How u fixed call audio ?
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
NsovoXD said:
I tried flashing lineage and aosp. With both after going through the process, when I reboot system in twrp, it always reboots to download mode.
Device model: sm-j410f
Click to expand...
Click to collapse
try with orangefox
also if you have issues flash the first release of the vendor then update to v2
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
LegoLivesMatter said:
Has anyone tried this /vendor with a Lineage 18.1 GSI? Asking for a friend.
Click to expand...
Click to collapse
should work!

Categories

Resources