Related
Hi, I recently decided to root my Nexus 5 using this guide on youtube: /watch?v=J1AKqrrf-5o
But after I'm all done with the rooting process, I noticed that my Nexus 5 has lost its LTE signal. Now it onlyy uses 3G. I managed to put it back on LTE by doing: *#*#4636#*#* and changed my prefered network, but by doing so, I lost my service with T-Mobile. Can't call or send messege with LTE on.
Please help me! I'm very new to Android and rooting but this first experience is not so good. Can you tell me what went wrong? Also, I rooted using the Linux guide.
Rooting alone won't mess up Wi-Fi. Don't use you tube use this http://forum.xda-developers.com/showthread.php?p=47025283
You might need this first. http://forum.xda-developers.com/showthread.php?p=47156064
jd1639 said:
Rooting alone won't mess up Wi-Fi. Don't use you tube use this http://forum.xda-developers.com/showthread.php?p=47025283
Click to expand...
Click to collapse
Many thanks, but I what can I do now? I don't want to sound like a jerk but what can the link do if I already rooted using the youtube guide (sorry again if that does sound jerkish).
danny2146 said:
Many thanks, but I what can I do now? I don't want to sound like a jerk but what can the link do if I already rooted using the youtube guide (sorry again if that does sound jerkish).
Click to expand...
Click to collapse
That's why I have you the second link
If all else fails flash the google stock images
Agreed. A root alone should not have caused an issue with your radio unless something went incorrectly. I would ( personally ) flash Google's stock nexus images and then possibly try again. Gaining root access can be done different ways, you may need to read into other alternatives...
I don't know. I use the ChainFIre CF Auto root on Ubuntu. I did unrooted the device earlier and was able to get LTE and service to work. Though after I use this samw method again, LTE stopped working properly, so I guess something is wrong with this method. Will try the "standard" method later though, if I can get a hold of a windows computer.
Let's back track a bit. What is the goal with root? Are you wanting to keep a custom recovery? What network are you using?
If you are going to just root stock and not go for a custom rom, I'd just flash a custom recovery via fastboot then boot to recovery and flash the SuperSU zip from Chainfire. At that point, you're rooted stock. If you decide to take an OTA update then you'll just need to make sure that you have the stock recovery installed. However, it's just as easy to flash the update when one of our devs packages it as a rom zip to flash via custom recovery, if not easier really.
Frankly, at this point my knowledge about android phone is still very hazy as this is acually my first ever phone, let along rooting, but I am eager to learn. So what's wrong if I didn't get a custom recovery? I just followed the instruction that they (chainfire autoroot) have for Linux and got this. Dunno if it was something in my phone nor the root. I am on T-Mobile BTW.
Yea, I'm baffled by that method affecting anything to do with service. It should be one of the least intrusive ways to root. However, weird things happen. So where are we now? Are you still rooted with the service issues? Which update / baseband are you on? You have the correct T-Mobile APNs? Have LTE(Recommended) selected under Preferred Network Mode in Settings / More... /Mobile Networks? Shouldn't really be necessary to mess with changing stuff in the Hidden Menu in this instance.
I'm on T-mobile Nexus 5 KitKat 4.4.2, with LTE in prefered mobile data. I rooted, the problem happened, unrooted this morning, the problem gone, rooted again with same method, the problem came back. I think I have the right APN since there are two with T-mobile options and I have tried both of them. As of now, I am still on root, but thinking of unroot it again...
danny2146 said:
I'm on T-mobile Nexus 5 KitKat 4.4.2, with LTE in prefered mobile data. I rooted, the problem happened, unrooted this morning, the problem gone, rooted again with same method, the problem came back. I think I have the right APN since there are two with T-mobile options and I have tried both of them. As of now, I am still on root, but thinking of unroot it again...
Click to expand...
Click to collapse
Still scratching my head over that, as the whole idea of Chainfire's auto root just literally is only supposed to install the SuperSU app and the binary and make no other changes. Obviously that isn't the case for you though. Are you unrooting via the settings in the SU app or via reflashing the stock img files?
es0tericcha0s said:
Still scratching my head over that, as the whole idea of Chainfire's auto root just literally is only supposed to install the SuperSU app and the binary and make no other changes. Obviously that isn't the case for you though. Are you unrooting via the settings in the SU app or via reflashing the stock img files?
Click to expand...
Click to collapse
I used the stock flashing method. I only unrooted it though, not lock the boot loader.
danny2146 said:
I used the stock flashing method. I only unrooted it though, not lock the boot loader.
Click to expand...
Click to collapse
Ok. So at this point, I would have the SuperSU zip (contains the SuperSU app and su binary) http://download.chainfire.eu/381/SuperSU/UPDATE-SuperSU-v1.91.zip on your phone, then fastboot a custom recovery like TWRP http://techerrata.com/browse/twrp2/hammerhead (fastboot flash recovery nameofrecovery.img), boot into recovery, and flash the zip. No need to wipe anything. Should just be able to flash and go. Then open SuperSU and make sure the binary is updated.
I'm sorry but how does one flash a custom recovery? Do I need a PC alondside or I can just do it entirely on my phone?
danny2146 said:
I'm sorry but how does one flash a custom recovery? Do I need a PC alondside or I can just do it entirely on my phone?
Click to expand...
Click to collapse
I included the command in the parenthesis in the last post.
In bootloader mode on the phone, of course, flash from PC, with the file in your fastboot folder:
fastboot flash recovery nameofrecovery.img (note - you can change the name of the file you download to whatever, as long as you leave the extension .img alone. ex: twrp.img)
If you are rooted already or still, you can flash from the phone either via the GooManager app https://play.google.com/store/apps/details?id=com.s0up.goomanager like this:
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will install the recovery automatically.
or
(Rooted only) You can also use the app Flashify to flash the .img file directly from the phone. https://play.google.com/store/apps/details?id=com.cgollner.flashify
So yea, to solve your issue, I think it would be best to just start clean/stock, then go with the custom recovery flashed from PC + SuperSU zip method. If you can fastboot the other files to return to stock, this is no different and very quick. Should not take more than 5-10 seconds to flash the recovery. The whole operation, starting from scratch should take make 3-5 minutes to flash recovery, boot to it, flash the SuperSU zip then reboot, assuming you have fastboot set up properly and the 2 files you need downloaded already.
es0tericcha0s said:
I included the command in the parenthesis in the last post.
In bootloader mode on the phone, of course, flash from PC, with the file in your fastboot folder:
fastboot flash recovery nameofrecovery.img (note - you can change the name of the file you download to whatever, as long as you leave the extension .img alone. ex: twrp.img)
If you are rooted already or still, you can flash from the phone either via the GooManager app https://play.google.com/store/apps/details?id=com.s0up.goomanager like this:
Install the app and open it. Tap menu then hit Install OpenRecoveryScript. Tap Yes. Verify that the filename displays your device's code name and hit Yes. The file will download and your device will install the recovery automatically.
or
(Rooted only) You can also use the app Flashify to flash the .img file directly from the phone. https://play.google.com/store/apps/details?id=com.cgollner.flashify
So yea, to solve your issue, I think it would be best to just start clean/stock, then go with the custom recovery flashed from PC + SuperSU zip method. If you can fastboot the other files to return to stock, this is no different and very quick. Should not take more than 5-10 seconds to flash the recovery. The whole operation, starting from scratch should take make 3-5 minutes to flash recovery, boot to it, flash the SuperSU zip then reboot, assuming you have fastboot set up properly and the 2 files you need downloaded already.
Click to expand...
Click to collapse
I don't know , but this is very interesting. I now suspect that the problem is from T-Mobile's end, not mine, nor the root. I just dug into my mom,dad's phone and what did I find? 3 goddamn G! Not LTE. But when I tried to force the thing to get LTE, it disconnected from the service. However, when I moved to another location this evening, both the LTE and service came back. I think something odd is happening either in my neighborhood or T-Mobile service. Anyways, seems like nothing of major, might have to have a talk to T-Mobile about this.
But last question, with my CF root now, how can I know if I already have a custom recovery yet? And which one? You know for if I want to flash a ROM in the future. And thank you for your help!
danny2146 said:
I don't know , but this is very interesting. I now suspect that the problem is from T-Mobile's end, not mine, nor the root. I just dug into my mom,dad's phone and what did I find? 3 goddamn G! Not LTE. But when I tried to force the thing to get LTE, it disconnected from the service. However, when I moved to another location this evening, both the LTE and service came back. I think something odd is happening either in my neighborhood or T-Mobile service. Anyways, seems like nothing of major, might have to have a talk to T-Mobile about this.
But last question, with my CF root now, how can I know if I already have a custom recovery yet? And which one? You know for if I want to flash a ROM in the future. And thank you for your help!
Click to expand...
Click to collapse
Just boot into recovery and see what you have.
If you used CF-Root, then it would not have installed a custom recovery. This is something that you would have done on your own and not likely to have forgotten. If you root access is working properly, I'd suggest installing TWRP from the GooManager app as it's pretty easy and no PC required.
http://teamw.in/project/twrp2/205
Then make a nandroid back up of your phone and make sure to back up the EFS folder too and save them to a safe place. You can back that up in TWRP or from the method described here:
http://forum.xda-developers.com/showthread.php?t=2514095
Let's back up here. Why do you think you need root if you have no idea what you are doing? Are you just rooting because you can or do you have a real purpose?
Sent from my Nexus 5
Hi, I rooted my a9 back in May right around when 6.0.1 came out. Long story short, my device just gave up the ghost after a nasty interaction between the screen and concrete, so now I have a new device being shipped tomorrow. I figured the first thing I'll do is let it run any updates / OTAs it might have to get it up to date then attempt to root again.
I've been looking around for the past several hours trying to determine what the correct rooting method might be now given Nougat's rollout, but I haven't come across anything truly definitive yet. If anyone could enlighten me on what I'll need to do now to root this new version I'd be very appreciative.
Thanks in advance guys!
Just got the phone today and updated to 7.0 (software version 2.18.651.2) Still searching around and not seeing a definitive answer on whether or not the old method for rooting works for this or not. I'm hesitant to attempt it without knowing, so any advice would be greatly appreciated.
Last time I rooted, I used Windroid toolkid to unlock the bootloader, flash TWRP and apply SU. I'm wondering, would the same program work if I replaced the recovery.img file in the Data folder with the TWRP 3.0.3 unofficial recovery I saw floating around in here for nougat?
txag2011 said:
Just got the phone today and updated to 7.0 (software version 2.18.651.2) Still searching around and not seeing a definitive answer on whether or not the old method for rooting works for this or not. I'm hesitant to attempt it without knowing, so any advice would be greatly appreciated.
Last time I rooted, I used Windroid toolkid to unlock the bootloader, flash TWRP and apply SU. I'm wondering, would the same program work if I replaced the recovery.img file in the Data folder with the TWRP 3.0.3 unofficial recovery I saw floating around in here for nougat?
Click to expand...
Click to collapse
You can unlock it on the HTCDEV website, although if you've already got it unlocked I doubt you need to do it again. To root I just ADB fastboot flashed TWRP 3.0.3-4, then used that to flash Magisk, mounting system read only. I'm fairly sure some people are using Su on Nougat, so it'll probably work.
Never used the Windroid toolkit so I can't comment on that, but I've also never minded typing commands to the prompt. I'd imagine if you gave it the right TWRP it'd flash it OK..
JohnRogers23 said:
You can unlock it on the HTCDEV website, although if you've already got it unlocked I doubt you need to do it again. To root I just ADB fastboot flashed TWRP 3.0.3-4, then used that to flash Magisk, mounting system read only. I'm fairly sure some people are using Su on Nougat, so it'll probably work.
Never used the Windroid toolkit so I can't comment on that, but I've also never minded typing commands to the prompt. I'd imagine if you gave it the right TWRP it'd flash it OK..
Click to expand...
Click to collapse
That actually doesn't sound too bad; From that it seems like the process is still more or less the same. Why is the system mounted as read only though? After looking through most of the older step by step guides it doesn't mention anything about doing that. From what I see, after i run the command "fastboot flash recovery recovery.img" i boot into TWRP and then proceed to do a factory reset and wipe the cache, presumably to remove the encryption iirc, then install the supersu.zip is that still the correct procedure, or does this require mounting the system as read only now?
If you don't mind me asking, what steps exactly did you take to root yours? from what I've found all I need to do is get the bootloader unlocked with the steps from HTCDev, drop into download more, fastboot flash recovery recovery.img to get TWRP, boot into TWRP, run a format to get rid of the encryption, then install supersu.zip and that should be it. IS this correct or am I missing something?
I'm about to start the process trying to root using the above methods.. I'll post again when I have results.
txag2011 said:
That actually doesn't sound too bad; From that it seems like the process is still more or less the same. Why is the system mounted as read only though? After looking through most of the older step by step guides it doesn't mention anything about doing that. From what I see, after i run the command "fastboot flash recovery recovery.img" i boot into TWRP and then proceed to do a factory reset and wipe the cache, presumably to remove the encryption iirc, then install the supersu.zip is that still the correct procedure, or does this require mounting the system as read only now?
If you don't mind me asking, what steps exactly did you take to root yours? from what I've found all I need to do is get the bootloader unlocked with the steps from HTCDev, drop into download more, fastboot flash recovery recovery.img to get TWRP, boot into TWRP, run a format to get rid of the encryption, then install supersu.zip and that should be it. IS this correct or am I missing something?
Click to expand...
Click to collapse
It wasn't bad at all. The reason I mounted R/O is because I'm using Magisk and not disabling dm-verity. I'm not sure if it works the same on 7, but SuperSu should disable dm-verity, so if you're using it you might not need to mount R/O, I haven't been keeping up on that at all. Benefits of Magisk include Android Pay and being able to take an OTA.
That all sounds like exactly what you need to do, except I believe it's fastboot mode (the one with the black screen?) to flash TWRP. I also didn't have to format anything, but I believe you do if you're using Su and disabling forced encryption. You may want to take a system image backup before you change anything, so you can go back to stock and get an OTA, or in case something goes wrong, but other than that it sounds correct to me.
JohnRogers23 said:
It wasn't bad at all. The reason I mounted R/O is because I'm using Magisk and not disabling dm-verity. I'm not sure if it works the same on 7, but SuperSu should disable dm-verity, so if you're using it you might not need to mount R/O, I haven't been keeping up on that at all. Benefits of Magisk include Android Pay and being able to take an OTA.
That all sounds like exactly what you need to do, except I believe it's fastboot mode (the one with the black screen?) to flash TWRP. I also didn't have to format anything, but I believe you do if you're using Su and disabling forced encryption. You may want to take a system image backup before you change anything, so you can go back to stock and get an OTA, or in case something goes wrong, but other than that it sounds correct to me.
Click to expand...
Click to collapse
huh... Magisk can utilize android pay and OTA's? I'm a little bit intrigued.. I just might have to give that a quick look now. Was it difficult to get up and running, and is there a fairly decent guide for doing it?
txag2011 said:
huh... Magisk can utilize android pay and OTA's? I'm a little bit intrigued.. I just might have to give that a quick look now. Was it difficult to get up and running, and is there a fairly decent guide for doing it?
Click to expand...
Click to collapse
Magisk is a framework for systemlessly modifying /system, so safety net works and you can take an OTA (with stock recovery), and also includes root. It's brilliant, but not quite as powerful as Xposed. Not difficult at all to get running, all it needs is to flash the magisk installer zip in TWRP (system mounted R/O of course) and then install the Magisk Manager app from the play store.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
JohnRogers23 said:
Magisk is a framework for systemlessly modifying /system, so safety net works and you can take an OTA (with stock recovery), and also includes root. It's brilliant, but not quite as powerful as Xposed. Not difficult at all to get running, all it needs is to flash the magisk installer zip in TWRP (system mounted R/O of course) and then install the Magisk Manager app from the play store.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Click to expand...
Click to collapse
I might give this a shot then, thank you for that. I'm about to try flashing TWRP 3.0.3-0. From the looks of it this is the most current one available. I'll update when it's done
txag2011 said:
I might give this a shot then, thank you for that. I'm about to try flashing TWRP 3.0.3-0. From the looks of it this is the most current one available. I'll update when it's done
Click to expand...
Click to collapse
Go to the TWRP thread, hit the download tab, pick one of the newer ones there. I went with 3.0.3.-4.
JohnRogers23 said:
Go to the TWRP thread, hit the download tab, pick one of the newer ones there. I went with 3.0.3.-4.
Click to expand...
Click to collapse
Did just that. Got TWRP installed successfully. I PM'ed you a second ago but I might as well ask this here for everyone else to see in case someone else is wondering this too.... So if I'm understanding Magisk correctly, all I do now is hit install and choose Magisk v11.1?
Edit: I did just that, but it doesnt seem to have done anything.. I dont see and magisk apps, and root checker says i'm not rooted.. Did I miss something?
edit 2: scratch that... I just installed the magisk manager app from the playstore.. according to it, the latest version of magisk is in fact, installed, and it's rooted with magisksu (despite not showing so in rootchecker).. Little confused now. Is that everything that needs to be done?
edit 3: I went back in after seeing something mentioning installing phh's superuser via TWRP and installing the app after installing magisk. Did both, but noticed safety net wasn't passing. found an option in settings to hide magisk, which seems to fix that. I also ran root checker again and it shows I have root.
unless I missed anything you can think of I think that about finishes things. If thats it thank you for all the help @JohnRogers23
txag2011 said:
Did just that. Got TWRP installed successfully. I PM'ed you a second ago but I might as well ask this here for everyone else to see in case someone else is wondering this too.... So if I'm understanding Magisk correctly, all I do now is hit install and choose Magisk v11.1?
Edit: I did just that, but it doesnt seem to have done anything.. I dont see and magisk apps, and root checker says i'm not rooted.. Did I miss something?
edit 2: scratch that... I just installed the magisk manager app from the playstore.. according to it, the latest version of magisk is in fact, installed, and it's rooted with magisksu (despite not showing so in rootchecker).. Little confused now. Is that everything that needs to be done?
edit 3: I went back in after seeing something mentioning installing phh's superuser via TWRP and installing the app after installing magisk. Did both, but noticed safety net wasn't passing. found an option in settings to hide magisk, which seems to fix that. I also ran root checker again and it shows I have root.
unless I missed anything you can think of I think that about finishes things. If thats it thank you for all the help @JohnRogers23
Click to expand...
Click to collapse
I'm glad you got it working. Strange you had to flash phh's Su separately though. Anyway, glad I could help.
Well Working !
1.Backup your all imp data from internal memory
2.Flash TWRP 3.0.3-4.. Do not reboot into system and enter into Recovery TWRP..
3.Do a factory Reset via TWRP.. Do not reboot into system
4.Now flash SuperSU 2.79 SR3 via TWRP.. Finally Reboot into system..
*2 bootloops are common, do not give up for at least 3 bootloops..
*It will take a long time to boot as you have done a factory reset.. So be patient and wait for at least half hour..
Dr.Anshuman said:
1.Backup your all imp data from internal memory
2.Flash TWRP 3.0.3-4.. Do not reboot into system and enter into Recovery TWRP..
3.Do a factory Reset via TWRP.. Do not reboot into system
4.Now flash SuperSU 2.79 SR3 via TWRP.. Finally Reboot into system..
*2 bootloops are common, do not give up for at least 3 bootloops..
*It will take a long time to boot as you have done a factory reset.. So be patient and wait for at least half hour..
Click to expand...
Click to collapse
Thanks! I got it more or less and went with magisk. Couldn't pass up a chance to have root and still get OTAs and use android pay. I'm still monkeying around trying to figure out how to use it to get liveboot back up and running.
This Process Will Root Phone Unlock Your VZW EMMC 15 Chipset Bootloader Install TWRP Recobery And Imstall Latest QL1 Stock Rom .
Downloads
S5_Root_Tools_2023.7z
EMMC_15_Rom.zip -- Stock QL1 6.0
Directions For Unlocking Stock Phone
I would recommend Windows defender is turned of before starting
1. Download S5_Root_Tools_2023.7z and unzip
2. Make sure Usb debugging is enabled on your phone
3. Plug in phone and run Safestrap.exe and follow directions on command window
4. This process is pretty much 1 click all automatic except following command window prompts
5. This will detect if your phone is EMMC 11 or 15
6. If it detects EMMC 15 it will automatically unlock your bootloaders.
7. Once process is done reboot too twrp and flash rom of choice or use provide one and flash root zip of choice
Regular Magisk
Releases · topjohnwu/Magisk
The Magic Mask for Android. Contribute to topjohnwu/Magisk development by creating an account on GitHub.
github.com
Magisk Delta
Releases · HuskyDG/magisk-files
Contribute to HuskyDG/magisk-files development by creating an account on GitHub.
github.com
ETFSU
EFTSU Root Solutions
The Largest Database for the Root Solutions on the Internet
eftsu.com
Safteynet Fix Module
Releases · kdrag0n/safetynet-fix
Google SafetyNet attestation workarounds for Magisk - kdrag0n/safetynet-fix
github.com
Old Method And Old Downloads
EMMC_15_SS_Install_QL1_6_0_1_MM_Bootloader_Unlock_AIO_Rom.zip -- Rom Zip
EMMC_11_S5_Root_Tools_2022_V7.7z
-- Files Needed To Root Phone
Instructions To Root And Install Safestrap
**If you already have safestrap installed you can skip to Instructions To Unlock Bootloader
**If you are already rooted but do not have safestrap installed download View attachment S5_Safestrap.apk install then skip to Instructions To Unlock Bootloader**
Directions
1. Download both files and unzip EMMC_15_And_11_S5_Root_Tools_2022_V7.7z
2. Reboot phone too Download Mode by holding Power+VolDwn+HomeButton as phone starts up
3. Plug phone into computer and open the Odin provided in the above file in the Odin_Folder
4. In Odin Choose BL slot and choose the COMBINATION_VZW_FA44_G900VVRU2APA1_VZW2APA1_2572656_REV00_user_mid_noship_MULTI_CERT.tar.md5 Located in the Odin_Folder
5. Flash the file using provided Odin let phone reboot. This will wipe your phone
6. Once phone is rebooted make sure its plugged into computer and phone use recognized by computer
7. Run the Install_One_Click.cmd this should install safestrap. If this method fails countinue with below methods.
8. If above method fails you can reboot and try again or run the Manual_Install_Root_Apps.cmd and try below methods to root
Towel Root Method
These steps are only needed if above root method failed
1. You need too be connected to a network. Try one of towel root apps and if not successful then try the other one. If it doesn't work go to King root section
2. If towel root succeeds then run the click on the super su app and choose to update su binary and choose normal once successfully updated reboot phone
King Root Method
These steps are only needed if towel root failed
1. You will need to be connected to a network. Click on King root app then click try root
2. Once root is successful don't click on the optimize and close the king root app.
3, Run the Manual_Install_SuperSu.cmd
Installing Safestrap
9. This only needs to be done if 1Click bat method failed. Now click on safestrap app and clisk install safestrap click allow in root dialog app once installed click reboot to safestrap
10. Busybox must be installed ifirst if you used towelroot method too root
Instructions To Unlock Bootloader
11. Enter safestrap now in safetrap it will ask you to swipe to allow modding system make sure to do this now . If you have not copied the EMMC_15_SS_Install_QL1_6_0_1_MM_Bootloader_Unlock_AIO_Rom.zip from the EMMC_15_Bootloader_Unlock_Zip folder do so now Click install tab and choose EMMC_15_SS_Install_QL1_6_0_1_MM_Bootloader_Unlock_AIO_Rom.zip and install.
12. When done phone will power off.
13. Reboot phone to recovery you should now have TWRP recovery installed and the choose wipe the advanced wipe and wipe data only then reboot
14. Phone will reboot and stick on red Verizon screen for probably 15 to 20 min be patient. When finally booted you will have an unlocked bootloader with TWRP recovery running a Deodexed Rooted QL1 stock MM 6.0 Rom Rooted with EFTSU with root hide and safetynet pass module
Disabling Reactivation Lock
Thanks bbsc
1. Follow above directions too obtain safestrap and root
2. Download and flash EMMC_11_NCG_KK_Safestrap_Full.zip in safestrap then wipe data
This has Samsung Setup Wizard removed so you can get through setup
3. Set up a wireless connection or use your SIM-card and internet connection from your provider.
4. Navigate to Settings - Security, find Reactivation Lock and untick it. The phone will ask you for your existing credentials or to register a new Samsung account. Accept too update app then allow google check when it ask
5. Login to your new account and you will be able to untick Reactivation Lock.
6. When it unticked, Navigate to Settings - Backup Reset - Factory data Reset.
7. Phone will reboot too stock recovery and wipe data and remove current samsung account and you are good too go.
8. Now proceed with unlocking bootloader step 11 you have to enter safestrap from the safestrap splash screen on bootup its not installed as a recovery image because stock recovery is needed
Credits
beaups Sourcecode and tool
ryanbg
haggertk For his CID
autonomousperson For compiling the source to a app
magic_man185 For compiling the source
GeTex
klabit87 - Basically Everything
@GSMCHEN Lots of stuff
elliwigy Lots of stuff
afaneh92 -Safestrap and too much too mention
Sourcecode
https://github.com/beaups/SamsungCID
Instructions for downgrading or updating bootloaders can be found here
2022_VZW_EMMC_15_Chipset For Unlocked Dev BL To Downgrade To LL_KK Or Upgrade To MM_And Keep Unlock Bootloader
This Process Will Update Or Downgrade Your VZW EMMC Chipset DEV Aboot Bootloader Unlocked S5 To Marshmallow 6.0 Lollipop 5.0 Or Kitkat 4.2 or 4.4 Root And Unlock Instructions Can Be Found Here EMMC 15 Rooting And Bootloader Unlocking EMMC 11...
forum.xda-developers.com
jrkruse said:
mine
Click to expand...
Click to collapse
Nice job man! [emoji106]
stang5litre Edition 5.0 Roms
stang5litre said:
Nice job man! [emoji106]
stang5litre Edition 5.0 Roms
Click to expand...
Click to collapse
I was bored so I thought it would be fun to mess around with some old school stuff. Man things were alot more simple back in these days
@jrkruse awesome job...!! :good:You definitely must be bored... Lol. May try that on an old one for craps and giggles... Lol. Again, awesome to bring a lil history back to life... :good:
jrkruse said:
I was bored so I thought it would be fun to mess around with some old school stuff. Man things were alot more simple back in these days
Click to expand...
Click to collapse
Nice job man, much appreciated.
If you ever get bored try to make a pre-rooted rom/safestrap recovery (course no bootloader unlock) for the G930U/G935U with the latest firmware UUESACSI1 (Aug 27 2019), since it looks like Samsung has stopped updating this phone, or better yet a root-patcher for a stock sytem.img like you did for the G950/N950. I have uploaded the latest eng-boot vA/10 here: https://forum.xda-developers.com/sho...postcount=1826
jrkruse said:
I was bored so I thought it would be fun to mess around with some old school stuff. Man things were alot more simple back in these days
Click to expand...
Click to collapse
How do I update the bootloader and rom to newer QL1 if I had already unlocked the bootloader and installed twrp with much older stock rom and bootloader?
I still have the stock rom from 2016 when the bootloader unlock method was discovered.
googlephoneFKLenAsh said:
How do I update the bootloader and rom to newer QL1 if I had already unlocked the bootloader and installed twrp with much older stock rom and bootloader?
I still have the stock rom from 2016 when the bootloader unlock method was discovered.
Click to expand...
Click to collapse
https://forum.xda-developers.com/ve...ent/vzwemmc15chipset-dev-bl-unlocked-t4010757
Sent from some device I modified
the rar seems to be corrupted ... says unknown or damaged format. I tried a few of the download points.
Would you be able to re-create / upload?
bigstack said:
the rar seems to be corrupted ... says unknown or damaged format. I tried a few of the download points.
Would you be able to re-create / upload?
Click to expand...
Click to collapse
What are you extracting it with?
Sent from some device I modified
First of all, thank you so very much Jkruse! I followed all of your instructions and everything went perfectly! The reason why I wanted to get this completed on my old S5, is that we want to gift this phone to my wife's mother. The catch is, she only speaks Russian, and I was wondering if I would now be able to flash an international version of firmware on the S5, so that she can have access to Russian as a language option? Is this doable?
Remedy1230 said:
First of all, thank you so very much Jkruse! I followed all of your instructions and everything went perfectly! The reason why I wanted to get this completed on my old S5, is that we want to gift this phone to my wife's mother. The catch is, she only speaks Russian, and I was wondering if I would now be able to flash an international version of firmware on the S5, so that she can have access to Russian as a language option? Is this doable?
Click to expand...
Click to collapse
Its really no easy process to flash an international rom if you are using Verizon then data will probably not work with out some editing. You can always try it but Verizon will probably need Verizon csc stuff to work and build.prop edits.
Sent from some device I modified
Hey thanks for this post! I was worried about using some of the old guides on my phone, glad I found this.
However, I have a question due to why I want to root my phone.
My situation: My phone went through the factory reset process without giving me a warning before doing so. I plan on rooting my phone and trying a few different methods for recovering the files.
My Main Question: Will I be good to go with a fully rooted phone after completing step 12?
I don't feel a need to unlock the bootloader for what I'm doing (although I might do so anyway after I'm done attempting to recover files).
I've never rooted a phone before. Aside from verifying that I'm using the EMMC 15 chipset (I used the eMMC_CID_Checker_apk from this thread:https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529), is there anything else I should do or know about?
SaltedSand said:
Hey thanks for this post! I was worried about using some of the old guides on my phone, glad I found this.
However, I have a question due to why I want to root my phone.
My situation: My phone went through the factory reset process without giving me a warning before doing so. I plan on rooting my phone and trying a few different methods for recovering the files.
My Main Question: Will I be good to go with a fully rooted phone after completing step 12?
I don't feel a need to unlock the bootloader for what I'm doing (although I might do so anyway after I'm done attempting to recover files).
I've never rooted a phone before. Aside from verifying that I'm using the EMMC 15 chipset (I used the eMMC_CID_Checker_apk from this thread:https://forum.xda-developers.com/ve.../testers-required-easier-root-method-t3561529), is there anything else I should do or know about?
Click to expand...
Click to collapse
By the time you root there will be no files to recovery. There is another wipe involved to root so chances are there will not be much left to recover
Sent from some device I modified
jrkruse said:
By the time you root there will be no files to recovery. There is another wipe involved to root so chances are there will not be much left to recover
Sent from some device I modified
Click to expand...
Click to collapse
I'm wondering if he's wanting to root to use a file recovery app, like DiskDigger. It can recover but device needs to be rooted to access the complete internal system to recover files. As he mentioned a few times about recovering/restoring files. I recall using that (DD) a couple times and it actually worked after I mistakenly did a full wipe/reset when I was switching between ROM's and back to stock...
al50 said:
I'm wondering if he's wanting to root to use a file recovery app, like DiskDigger. It can recover but needs device needs to be rooted to access the complete internal system to recover files. As he mentioned a few times about recovering/restoring files. I recall using that (DD) a couple times and it actually worked after I mistakenly did a full wipe/reset when I was switching between ROM's and back to stock...
Click to expand...
Click to collapse
Like i said though in order to root you have to wipe again before you can root. So there aren’t going to be much left to recovery after 2 wipes and a repartition
Sent from some device I modified
al50 said:
I'm wondering if he's wanting to root to use a file recovery app, like DiskDigger. It can recover but device needs to be rooted to access the complete internal system to recover files. As he mentioned a few times about recovering/restoring files. I recall using that (DD) a couple times and it actually worked after I mistakenly did a full wipe/reset when I was switching between ROM's and back to stock...
Click to expand...
Click to collapse
Yeah that's what I have in mind.
jrkruse said:
Like i said though in order to root you have to wipe again before you can root. So there aren’t going to be much left to recovery after 2 wipes and a repartition
Sent from some device I modified
Click to expand...
Click to collapse
Yeah I figured, makes sense, but I don't see a mention of wiping before step 12 though. This is why I'm asking if it would be okay for me to stop there, attempt to recover some files, and then continue with the rest of the steps?
Could this potentially screw something up if I do it this way? I'd rather play it safe than sorry, most of my important stuff on this phone is backed up anyway.
SaltedSand said:
Yeah that's what I have in mind.
Yeah I figured, makes sense, but I don't see a mention of wiping before step 12 though. This is why I'm asking if it would be okay for me to stop there, attempt to recover some files, and then continue with the rest of the steps?
Could this potentially screw something up if I do it this way? I'd rather play it safe than sorry, most of my important stuff on this phone is backed up anyway.
Click to expand...
Click to collapse
Flashing the combo firmware so you can root wipes your phone
Sent from some device I modified
jrkruse said:
Flashing the combo firmware so you can root wipes your phone
Sent from some device I modified
Click to expand...
Click to collapse
Ah, I see, but would it be safe for me to stop at step 12 anyway?
I figure I might as well give it a shot anyway, even if It's unlikely I'll recover anything, but I'd rather only wipe it a single time than twice.
SaltedSand said:
Ah, I see, but would it be safe for me to stop at step 12 anyway?
I figure I might as well give it a shot anyway, even if It's unlikely I'll recover anything, but I'd rather only wipe it a single time than twice.
Click to expand...
Click to collapse
If you stop at 12 you will just have king root and some apps work with kingroot but some do not
Sent from some device I modified
Just a heads up to anyone who is wondering about root for this phone - I successfully rooted it with Magisk. It was pretty easy. Basically I just followed the same steps as outlined in this thread, which was for rooting last year's Moto G Stylus model, and it worked. Obviously you need to have already unlocked the bootloader before doing any of this.
I got the stock boot.img from the firmware linked in this thread. I patched it using Magisk Manager (v8.0.7) then flashed it via fastboot. My installed Magisk version is 21.4 (21400).
-- A WORD OF CAUTION: --
As of now there is no TWRP or any other custom recovery for this phone that I am aware of, so if you mess something up due to root, your only option to fix it might be to reflash the stock firmware.
A note about mobile banking apps:
After I installed Magisk Manager, my banking app stopped working and SafetyNet check was failing. After flashing the patched boot.img and rebooting, the SafetyNet check passed but my banking app still wasn't working. I used Magisk Hide and checked off the banking app in the list, but that didn't help either. What I had to do was use the Hide Magisk Manager option where it reinstalls Magisk Manager under a different name. Now my banking app is working again.
DM.IDOL said:
... - I successfully rooted it with Magisk. It was pretty easy. Basically I just followed the same steps as outlined in this thread, which was for rooting last year's Moto G Stylus model, and it worked. ...
Click to expand...
Click to collapse
It worked for me too. It was also easy for me because the only RETUS upload on the mirrors.lolinet site was my exact firmware version. Downloaded that, extracted and used that boot.img for magisk-patching.
The only issues I'm left with are:
1. Adaway isn't working (can't write to any of the canned hosts file paths) and I haven't figured out where I might be able to store a writable hosts file, and . . .
2. Titanium Backup (Pro) works to freeze almost every app that I wanted to disable. The one exception was Motorola Update Service. TiBu toasts that it was disabled and "invisible from the app drawer", but it actually wasn't disabled and still isn't. It still shows under System Applications. So I dunno . . . it's not a deal breaker as long as auto updating stays turned off.
Bootloader is unlocked and rooting via Magisk worked on my Stylus 2021, exactly as advertised.
Update: My solution for AdAway was here, AdAway 5.3 (newest version I believe).
Update2: Sans freezing Motorola Update Service, updates are of course frozen from actually running because of system changes by root & TWRP. So no big worries, just the nuisance of notifications.
cant the new maagisk be used as an alternative custom recovery? Something about renaming the apk to zip and then flashing zip file on recovery?
Mr.Morgan said:
cant the new maagisk be used as an alternative custom recovery? Something about renaming the apk to zip and then flashing zip file on recovery?
Click to expand...
Click to collapse
No, Magisk is not custom recovery.
There are two ways to install Magisk, using the .zip version, with a custom recovery like TWRP or
Using the magisk app to patch a boot.img then flash with fastboot.exe
sd_shadow said:
No, Magisk is not custom recovery.
There are two ways to install Magisk, using the .zip version, with a custom recovery like TWRP or
Using the magisk app to patch a boot.img then flash with fastboot.exe
Click to expand...
Click to collapse
I appreciate the knowledge, but perhaps you can shed some light on what the app means by " Custom Recovery lovers, no worries! The Magisk app APK itself is a custom recovery flashable zip, just like MAGIC. Check out the updated installation guide for more info"
Mr.Morgan said:
I appreciate the knowledge, but perhaps you can shed some light on what the app means by " Custom Recovery lovers, no worries! The Magisk app APK itself is a custom recovery flashable zip, just like MAGIC. Check out the updated installation guide for more info"
Click to expand...
Click to collapse
You are partly correct, there has been a big change with Magisk.
You can just change the Magisk.apk to Magisk.zip
But the zip does not replace a custom recovery.
It just eliminates the need for a separate manager.zip
In some custom recoveries, the installation may fail silently (it might look like success but in reality it bootloops). This is because the installer scripts cannot properly detect the correct device info or the recovery environment does not meet its expectation. If you face any issues, use the Patch Image method as it is guaranteed to work 100% of the time. Due to this reason, installing Magisk through custom recoveries on modern devices is no longer recommended. The custom recovery installation method exists purely for legacy support
Click to expand...
Click to collapse
Magisk in Recovery
If your device does not have ramdisk in boot images, Magisk has no choice but to be installed in the recovery partition. For these devices, you will have to reboot to recovery every time you want Magisk.
When Magisk is installed in your recovery, you CANNOT use custom recoveries to install/upgrade Magisk! The only way to install/upgrade Magisk is through the Magisk app. It will be aware of your device state and install to the correct partition and reboot into the correct mode.
Since Magisk now hijacks the recovery of the device, there is a mechanism to let you actually boot into recovery mode when needed: it is determined by how long you press the recovery key combo.
Click to expand...
Click to collapse
This does not replace the stock recovery, just patches the recovery.
I recently purchased this phone, Moto G Stylus 2021, from Amazon. When I enter the dev options menu, OEM Unlocking is greyed out. I did a bit of research and found another thread online where another two users had the same problem, for all of two days.
After two days, the option to enable OEM Unlocking was no longer greyed out for the both of them. Fascinating! I may return this phone before that time is up, but if I don't, I'll report back on any changes for sure.
EDIT: I've decided to return this phone and get a Galaxy Tab S7 instead; there's more room to draw and a better pen!
Can't find my firmware on lolinet (boost mobile qpc30.q4-31-93)
Tried lenovo's rescue tool to see if I could grab the firmware that way and it just kept giving me errors.
If anyone has some how acquired the appropriate firmware would you mind sending it to me?
I can't remember exactly where I seen someone else commenting on this topic but they had lost their cellular network after rooting ,
My problem / question is that I have also my lost my cellular network connection after rooting but not completley only to the original carrier I got t this phone with witch is boost, but if I try another carrier such as tmobile or sprint or even metro it will work because they are basically all 1 company now , but how do I fix this problem to get my phone to read my sim card as valid (I get the invalid sim msg) when I put my original sim in and I just went and got a brand new replacement sim from them to see if that would solve the issue.also going off reading the forums on here I went with the mask retus firmware for flashing because there isn't one on there anywhere for so any help would be hysteria l greatly appreciated. This is my only problem I'm having since rooting everything else is working perfectly fine.
BobbyBlunt said:
Can't find my firmware on lolinet (boost mobile qpc30.q4-31-93)
Tried lenovo's rescue tool to see if I could grab the firmware that way and it just kept giving me errors.
If anyone has some how acquired the appropriate firmware would you mind sending it to me?
Click to expand...
Click to collapse
just an idea but on the site that has all the firmware im thinking could submit a request to them using that telegram messenger thing for the firmware needed.....it may be kind of a longshot but just thought of that myself and the closest one i see to what you posted is the metro version
riggin said:
just an idea but on the site that has all the firmware im thinking could submit a request to them using that telegram messenger thing for the firmware needed.....it may be kind of a longshot but just thought of that myself and the closest one i see to what you posted is the metro version
Click to expand...
Click to collapse
I tried the lenovo recovery tool again and this time it was able to find the appropriate firmware. I was able to successfully root
Hey well i just installed latest magisk and patched boot img and moved it to my pc and went thru fast boot and just did fastboot flash boot patched.img and it works fine. I dunno if latest update fixed whatever was wrong on yours but if i installed the older one it would not even let me pick the boot img to patch *shrugs* but all working on mine now...we just need full device tree etc so we can get us a a recovery def want that before i go adding mods. If it helps any I have cricket same as ATT the person who lost cell may need to redo their apn or take sim card out and reapply it hope that works.
Moondroid said:
The one exception was Motorola Update Service. TiBu toasts that it was disabled and "invisible from the app drawer", but it actually wasn't disabled and still isn't. It still shows under System Applications.
Click to expand...
Click to collapse
I've been having the same problem trying to disable the update prompts. Titanium Backup doesn't work, nor can I disable it via terminal using pm. The system update screen will pop up multiple times a day, interrupting whatever I'm currently doing to tell me I have an update. It's really annoying that it can't be frozen.
Well after a few days of LTE connection my own unlock now works got root
riggin said:
just an idea but on the site that has all the firmware im thinking could submit a request to them using that telegram messenger thing for the firmware needed.....it may be kind of a longshot but just thought of that myself and the closest one i see to what you posted is the metro version
Click to expand...
Click to collapse
hey was just wondering since im kinda in the same situation you were in with not being able to obtain exact firmware need at first for boost model if maybe you can proovide tthe brief steps you made to get the lmsa tool to recognize it and pull the corerct firmware....ty so much if u can
riggin said:
hey was just wondering since im kinda in the same situation you were in with not being able to obtain exact firmware need at first for boost model if maybe you can proovide tthe brief steps you made to get the lmsa tool to recognize it and pull the corerct firmware....ty so much if u can
Click to expand...
Click to collapse
Unfortunately, either LMSA determines the correct firmware or it doesn't, there isn't anything that can be done to fix it, except contacting Motorola.
For other options see
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
Hey Guys, I'm continuing on this thread since I've gotten further. I used LMSA to download the firmware zip using the Resuce button. Afterwards I copy that zip (2+ gigs) to my download folder. I open up Magisk and select intall and select the firmware zip. I starts out successfully but then fails. I get this in the log folder.
- Device platform: arm64-v8a
- Installing: 23.0 (23000)
- Copying image to cache
- Unpacking boot image
Parsing boot image: [/data/user_de/0/com.topjohnwu.magisk/install/boot.img]
! Unsupported/Unknown image format
! Installation failed
I even tried to resuce the phone using the firmware provided by the LMSA program which essentially wipes my phone and try again with a clean Magisk load and I'm getting the same. The only thing I'm thinking is I could be getting my Magisk from another source. I'm using version 23 from github.
steppinthrax said:
Hey Guys, I'm continuing on this thread since I've gotten further. I used LMSA to download the firmware zip using the Resuce button. Afterwards I copy that zip (2+ gigs) to my download folder. I open up Magisk and select intall and select the firmware zip. I starts out successfully but then fails. I get this in the log folder.
- Device platform: arm64-v8a
- Installing: 23.0 (23000)
- Copying image to cache
- Unpacking boot image
Parsing boot image: [/data/user_de/0/com.topjohnwu.magisk/install/boot.img]
! Unsupported/Unknown image format
! Installation failed
I even tried to resuce the phone using the firmware provided by the LMSA program which essentially wipes my phone and try again with a clean Magisk load and I'm getting the same. The only thing I'm thinking is I could be getting my Magisk from another source. I'm using version 23 from github.
Click to expand...
Click to collapse
It isn't a zip file it's a folder or at least every firmware I have downloaded is automatically unzipped by LMSA.
You only need to copy the boot.img and maybe the recovery.img to the device.
sd_shadow said:
It isn't a zip file it's a folder or at least every firmware I have downloaded is automatically unzipped by LMSA.
You only need to copy the boot.img and maybe the recovery.img to the device.
Click to expand...
Click to collapse
Thanks I figured it out last night. I also figured out pretty quickly that once you root a phone certain applications will no longer function. I didn't deal with this before, but since I work from home I have to use some of those apps that create a "Work Profile". The one app "Intelligent Hub" removed itself and my work profile. When trying to re-install and authenticate with my work it literally said "Won't provision a compromised device".
Within Magsik I used the Magsik hide feature and tried selected that app and hiding all methods that it could detect root. I even then rebooted, removed/reinstall etc. Nothing worked. The app still kept detecting root. I know that the Xposed Framework modules may work in hiding root but I decided to go all the way back to normal since there's little benefit for me to root except for the ability for me to remove bloatware. This is a retail unlocked and there's little if any bloatware on the device.
I removed Magsik and any other junk, turned on OEM locking and rebooted and I'm back to mormal. Thank you everyone this was a leaning exp. I haven't rooted in like 5 years.
DM.IDOL said:
I've been having the same problem trying to disable the update prompts. Titanium Backup doesn't work, nor can I disable it via terminal using pm. The system update screen will pop up multiple times a day, interrupting whatever I'm currently doing to tell me I have an update. It's really annoying that it can't be frozen.
Click to expand...
Click to collapse
FYI, for posterity, instead of getting multiple notifs per day I just tap and let it try to update. It fails quickly and the notification is nixed for a while.
I signed up for a beta test on centernode and received a smartphone to test. The phone is so new that I cannot find any information about it on the internet. The bootloader is unlocked on it. I was reading that you can use magisk to root any device with an unlocked bootloader and system image. Since the phone is so new I cannot find a system image. Is it still possible to root the device? Is there a way I can backup the stock ROM and create a system image that way? Is there something else that will work? I really want to root the device because it came with a preinstalled app which is a system booster type app. It will not let me uninstall it, disable it, or force stop it. When I install my app for my alarm clock it keeps killing the app and the alarm will not go off. I have went through all of the app settings and cannot get it to stop. It also keeps interfering with my VPN. I would also like to root th device to remove some of the bloatware and to have access to the HOST file. Could someone please help me this? I would greatly appreciate it. Thanks guys!
I'm not known for giving good advice but if I was in your situation I would try to install the lastest version of Magisk and hope for the best. Knowing how I am it would be driving me nuts wondering if it would work.
That booster app, have you tried uninstalling it with adb?
Gregbmil1 said:
I'm not known for giving good advice but if I was in your situation I would try to install the lastest version of Magisk and hope for the best. Knowing how I am it would be driving me nuts wondering if it would work.
That booster app, have you tried uninstalling it with adb?
Click to expand...
Click to collapse
Hey, thanks for your reply. I am really eager to root it. I almost just went for it. However, then I thought about it. If something went wrong I would not have any way to recover the phone since there is not a system image available yet. I have not given adb removal a try yet as I figure it would just be easier to go with rooting since it will help me with everything I am trying to achieve. If I cannot root it then I will go the adb route. Hopefully someone will come along and help me out. Fingers crossed
Let us know what you end up doing. Are you expected to send the phone back after the beta testing? If you are responsible for any damages done to it, I would not try it.
You could send it back bricked and say you have no idea what happened to it, lol. That or say you were "testing" the security of the device and that it passes
bigroc2223 said:
I signed up for a beta test on centernode and received a smartphone to test. The phone is so new that I cannot find any information about it on the internet. The bootloader is unlocked on it. I was reading that you can use magisk to root any device with an unlocked bootloader and system image. Since the phone is so new I cannot find a system image. Is it still possible to root the device? Is there a way I can backup the stock ROM and create a system image that way? Is there something else that will work? I really want to root the device because it came with a preinstalled app which is a system booster type app. It will not let me uninstall it, disable it, or force stop it. When I install my app for my alarm clock it keeps killing the app and the alarm will not go off. I have went through all of the app settings and cannot get it to stop. It also keeps interfering with my VPN. I would also like to root th device to remove some of the bloatware and to have access to the HOST file. Could someone please help me this? I would greatly appreciate it. Thanks guys!
Click to expand...
Click to collapse
If you have the firmware then you're in luck (especially if it's the full one)
Download a program for windows called "Payload Dumper"
Open the zip (firmware) and copy out the payload.bin file.
Copy this to the input folder from payload dumper.
Run the exe for payload dumper
It'll output a bunch of files to output folder
You'll see a boot.img file this is essentially the file you use to boot your phone and also where magisk would reside too.
Copy this to your phone.
Install the latest Magisk then open it
Click install and then patch a file, navigate to the boot.img
Click the boot.img and it'll output a file to "SDcard\Downloads" usually called magisk_patched.img
Copy this to your fastboot folder on your computer and open a CMD / Powershell command to that location.
Then boot to fastboot / bootloader mode
Then type:
fastboot boot "name of patched boot.img"
eg:
fastboot boot magisk_patched.img
The phone will boot
From this point you are rooted but you need to make it permanent as you haven't flashed the boot sector at this point, you're only booting an image, if you were to reboot you'd lose it.
Open Magisk again then click install again.
Now instead of just seeing patch a file you'll see "Install Directly" + "Install after an OTA"
Click Install directly, allow it to finish, then reboot.
You're now fully rooted.
Heres my guides for the oneplus 8 pro, don't use the images there as they're for the 8 pro, you also can download payload dumper from there too.
(ROOT) Android 11 / Latest stock and patched img's / payload dumper / magisk_patched guides
Hi all, Have seen a lot of requests for patched boot images on these threads so thought i'd share a guide on how to get it yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it...
forum.xda-developers.com
IT's easy.
Good luck
dladz said:
If you have the firmware then you're in luck (especially if it's the full one)
Download a program for windows called "Payload Dumper"
Open the zip (firmware) and copy out the payload.bin file.
Copy this to the input folder from payload dumper.
Run the exe for payload dumper
It'll output a bunch of files to output folder
You'll see a boot.img file this is essentially the file you use to boot your phone and also where magisk would reside too.
Copy this to your phone.
Install the latest Magisk then open it
Click install and then patch a file, navigate to the boot.img
Click the boot.img and it'll output a file to "SDcard\Downloads" usually called magisk_patched.img
Copy this to your fastboot folder on your computer and open a CMD / Powershell command to that location.
Then boot to fastboot / bootloader mode
Then type:
fastboot boot "name of patched boot.img"
eg:
fastboot boot magisk_patched.img
The phone will boot
From this point you are rooted but you need to make it permanent as you haven't flashed the boot sector at this point, you're only booting an image, if you were to reboot you'd lose it.
Open Magisk again then click install again.
Now instead of just seeing patch a file you'll see "Install Directly" + "Install after an OTA"
Click Install directly, allow it to finish, then reboot.
You're now fully rooted.
Heres my guides for the oneplus 8 pro, don't use the images there as they're for the 8 pro, you also can download payload dumper from there too.
(ROOT) Android 11 / Latest stock and patched img's / payload dumper / magisk_patched guides
Hi all, Have seen a lot of requests for patched boot images on these threads so thought i'd share a guide on how to get it yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it...
forum.xda-developers.com
IT's easy.
Good luck
Click to expand...
Click to collapse
So it sounds like since this is a beta device and I cannot find a firmware image in out of luck?
I guess the only other option I have is finding someone who can port twrp for my device. Then I can just root via TWRP. However, from what I have read that might not even be an option as Android 11 mostly has to be rooted the hard way which you have gave instructions on above.
Can anyone think of anything else I can try?
bigroc2223 said:
So it sounds like since this is a beta device and I cannot find a firmware image in out of luck?
I guess the only other option I have is finding someone who can port twrp for my device. Then I can just root via TWRP. However, from what I have read that might not even be an option as Android 11 mostly has to be rooted the hard way which you have gave instructions on above.
Can anyone think of anything else I can try?
Click to expand...
Click to collapse
You can also extract the boot image... Can't remember the commands for this via ADB, Google ADB extract boot.img
dladz said:
You can also extract the boot image... Can't remember the commands for this via ADB, Google ADB extract boot.img
Click to expand...
Click to collapse
Awesome this is exactly what I was trying to figure out in my original post. Since there is no stock firmware available yet (beta unit) what is the best way to backup the device so I do not get a brick in the process? Thanks again for your help.
bigroc2223 said:
Awesome this is exactly what I was trying to figure out in my original post. Since there is no stock firmware available yet (beta unit) what is the best way to backup the device so I do not get a brick in the process? Thanks again for your help.
Click to expand...
Click to collapse
An actual back up? Probably twrp if available.
If not then you'd need a recovery method.
So providing you have a recovery solution you should be fine.
dladz said:
An actual back up? Probably twrp if available.
If not then you'd need a recovery method.
So providing you have a recovery solution you should be fine.
Click to expand...
Click to collapse
Ahhh okay since it is a beta device no one has made TWRP for it yet. What do you think the risk is of manually pulling the boot img, patching, and flashing is? If I can get that to work I will try to port twrp to the device. Thanks again for the help.
bigroc2223 said:
Ahhh okay since it is a beta device no one has made TWRP for it yet. What do you think the risk is of manually pulling the boot img, patching, and flashing is? If I can get that to work I will try to port twrp to the device. Thanks again for the help.
Click to expand...
Click to collapse
You're very welcome.
Chances of it not booting after doing that? Absolutely zero.
It's a copy not a cut, so you're fine.
The only problem you may encounter is the ability to access the device on that level.
Just turn on usb debugging and make sure ADB works as it should be checking on ADB devices.
Then go ahead with the pull.
You'll be fine.
Also once you have the boot.img if the patched one doesn't work then just reboot and you're back to normal.
I would advise against flashing it, just boot it.
dladz said:
Just turn on usb debugging and make sure ADB works as it should be checking on ADB devices.
Then go ahead with the pull.
You'll be fine.
Also once you have the boot.img if the patched one doesn't work then just reboot and you're back to normal.
Click to expand...
Click to collapse
You can't simply run
Code:
adb devices
adb pull boot.img > C:\boot.img
to clone phone's boot.img to PC.
The correct way is described here
Extract Boot.img Directly from Device Without Downloading Firmware
In this tutorial, we will show you the steps to extract the boot.img file directly from your device without downloading the firmware.
www.droidwin.com
jwoegerbauer said:
You can't simply run
Code:
adb devices
adb pull boot.img > C:\boot.img
to clone phone's boot.img to PC.
The correct way is described here
Extract Boot.img Directly from Device Without Downloading Firmware
In this tutorial, we will show you the steps to extract the boot.img file directly from your device without downloading the firmware.
www.droidwin.com
Click to expand...
Click to collapse
I did not say that you could?? I said pull it.
Before that I said look it up / Google it
Thanks for your help guys I appreciate it greatly. I am going to give this a try today. I will report back and let you guys know how it goes.
One last question. Since this beta unit I got is a tracfone branded unit with an unlocked bootloader is it possible that they could push a firmware which will lock the bootloader at some point? If so is there any way to prevent that from happening? Thanks again for all your help.
bigroc2223 said:
Thanks for your help guys I appreciate it greatly. I am going to give this a try today. I will report back and let you guys know how it goes.
One last question. Since this beta unit I got is a tracfone branded unit with an unlocked bootloader is it possible that they could push a firmware which will lock the bootloader at some point? If so is there any way to prevent that from happening? Thanks again for all your help.
Click to expand...
Click to collapse
Possible yes, but I doubt they would do that.
Is it an ambassador phone? Or for testing?
Locking the bootloader wipes the phone so I wouldn't imagine they'd do that without forewarning.
Plus locking a bootloader comes with its risks too, so you could say that it broke from the update.
But it won't come to that, I've had several ambassador phones myself and honestly they're fire and forget for the most part, I wouldn't worry about it
dladz said:
Possible yes, but I doubt they would do that.
Is it an ambassador phone? Or for testing?
Locking the bootloader wipes the phone so I wouldn't imagine they'd do that without forewarning.
Plus locking a bootloader comes with its risks too, so you could say that it broke from the update.
But it won't come to that, I've had several ambassador phones myself and honestly they're fire and forget for the most part, I wouldn't worry about it
Click to expand...
Click to collapse
It's a phone for testing which I am allowed to keep.
dladz said:
Possible yes, but I doubt they would do that.
Is it an ambassador phone? Or for testing?
Locking the bootloader wipes the phone so I wouldn't imagine they'd do that without forewarning.
Plus locking a bootloader comes with its risks too, so you could say that it broke from the update.
But it won't come to that, I've had several ambassador phones myself and honestly they're fire and forget for the most part, I wouldn't worry about it
Click to expand...
Click to collapse
It is a phone for testing which I am allowed to keep. Specs are Snapdragon 750g, Adreno 619, and 4gb of ram. Not too shabby for a free phone. It is a lot snappier than the moto e6 I was previously using.
dladz said:
I did not say that you could?? I said pull it.
Before that I said look it up / Google it
Click to expand...
Click to collapse
This method requires TWRP. So this will not work.
bigroc2223 said:
Nvm
Click to expand...
Click to collapse
dladz said:
Again!!!? What's your problem??
You're just trying to (for whatever reason) prove me wrong and yet again I wasn't being descriptive of an ADB pull!!!
You're pulling the boot.img off the device by whatever means.
To be clear for the final time, I'm not stating to use twrp, a script or anything else I said look it up / Google it!
Now if you've helped the chap then that's great, looking at what I said and attempting to put me straight when you clearly don't have to, is no help to you or the chap needing help it's just making you look like you're on a power trip.
Click to expand...
Click to collapse
I'm just trying to get some help here guys that's it. I appreciate everyone's efforts and opinions. Let's all try to work together and try to find a solution peacefully please.
So far I have adb installed and working. I have tried to use the commands I was able to locate via google. So far nothing works. I have also tried uninstalling some programs using adb which did not work. I think I am going to have to find someone who could port twrp for me
bigroc2223 said:
I'm just trying to get some help here guys that's it. I appreciate everyone's efforts and opinions. Let's all try to work together and try to find a solution peacefully please.
So far I have adb installed and working. I have tried to use the commands I was able to locate via google. So far nothing works. I have also tried uninstalling some programs using adb which did not work. I think I am going to have to find someone who could port twrp for me
Click to expand...
Click to collapse
Sorry I got the wrong end of the stick, I thought you was a second person posting..
Forget what I said