Somehow the inside of my camera got dirt in it, and my pictures are coming out quite hazy. Any way I can clean the inside of the lens?
Thanks
bgree15 said:
Somehow the inside of my camera got dirt in it, and my pictures are coming out quite hazy. Any way I can clean the inside of the lens?
Thanks
Click to expand...
Click to collapse
You'd have to remove the Housing to get to the lens.
Here's a video on how to remove the housing:
http://youtu.be/ewdyo2fkJj8
Hope this helps!
Peace out with the grease out,
Malicious.
When I turn on front camera I see myself mugish, like there is fog around me.
I think that there is something on front lens, because in the left bottom everything is perfectly clear.
Has anyone here experienced such thing?
And has anyone here tried to clean their front camera lens already?
Thanks in advance
well, ehm...the quality sucks actually
or, you can open the back cover, the front glass of your front camera might have caught much dust.....or, if the dust reached inside, which is a tough case coz the camera is sealed in good way all around, blowing near the camera and around it would do the trick...
arabology said:
well, ehm...the quality sucks actually
or, you can open the back cover, the front glass of your front camera might have caught much dust.....or, if the dust reached inside, which is a tough case coz the camera is sealed in good way all around, blowing near the camera and around it would do the trick...
Click to expand...
Click to collapse
I have to wipe mine once a week. The front camera is indeed a dust catcher.
hi
I use a Q tip LIGHTLY I MEAN LIGHTLY moistened with alcohol, then i take a dry Q TIP and clean after that. PLEASE make sure the first Q tip is barely moist, just slightly because you dont want to WET the lens. be careful and gentle and it works wonderfully. This is how i clean my lens. Im sure their are other ways but the Q tip really gets in there and cleans it good!! Good Luck..
sshede said:
I have to wipe mine once a week. The front camera is indeed a dust catcher.
Click to expand...
Click to collapse
yeah, thanks to the innovation of hTC keeping the front camera hole open
I bought the HTC One M8 on launch day and have taken very good care of it since. Recently, the back camera has been taking very blurry pictures. The front camera is fine though. The lens is not cracked or scratched at all. I've wiped the lens down very good, but it doesn't help (both main and duo lens). Anyone else have this problem?
Are you sure it's not scratched? I had to remove the film that was on the camera as I had some scratches and noticed a degraded picture. Everything is great now. You can Google around for ways to remove the film on the camera.
Sent from my HTC6525LVW using Tapatalk
I had this problem when I first bought mine. I'm not sure if was the case I had on it or the film. But I changed the case and whipped the flim with a soft cloth an rebooted(idk y I rebooted lol) but it worked
HTC ONE M8?
Can try the old toothpaste trick. Get some toothpaste on a Q-Tip and rub it on the lens a bit. Then clean it off. Concept of waxing a car kind of. Worked on all phones I've had in the past.
The blurriness was due to scratches on the screen after all. I used some car polish to buff it out, now the pics are better than ever.
I have a problem with the front Facing Cam having fuzzy and blurry pics. I will try the toothpaste trick to see if it helps
So the glass covering the camera lens recently broke on my girlfriend's Galaxy S7. The camera still worked and focused correctly, but I tried to replace the glass.
I used a heat gun to remove all of the broken glass and adhesive. Ever since I did that, everything looks "foggy" in the camera app. It's like there's moisture covering the lens. We tried cleaning the lens with a Q-tip, but it still looks the same.
Anyone know why this would happen? Did I damage the camera unit with the heat? Any advice on what to do? Thanks in advance!
Maybe some adhesive is left between camera module and lens? Are lens exactly the same as the ones before? Just throwing some ideas around because I am honestly not an expert on this, might be damaged module but I don't know enough to say anything.
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Wait but is it foggy when you put lens over it? I mean is the whole package there or not? Because that's what lens are for, to focus stuff on the camera sensor. It's not clear from your post if you actually did that or not. Camera without lens with always be "foggy".
Edit: Reading it for 3rd time, is the exterior glass the only thing broken or is there more? Flat glass will not focus image so that is no the issue then. For a second I thought that you have camera module without any glass. Post some pictures I guess, from the camera and of the camera.
Sorry for the confusion. Yes, the exterior glass was the only thing broken. When it first broke, I ripped the shards off, and bought a replacement glass cover online. The camera was still working until I used a heat gun to remove the residual glass and adhesive.
After I did that, I tested the camera again, and that's when it looked foggy. Anyway, I'll post some pictures when I get the chance.
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
NeoDJW said:
Why would u even use heat gun for that? I changed about 20 camera lenses and all without heat gun, just break the glass and ripp it off, clean the leftover residue , put new glass and bam works... maybe u have condensation?
Click to expand...
Click to collapse
I was following a tutorial video I found online. The said that any residual adhesive from the old glass might cause an imperfect seal, and any old glass pieces might cause the new glass to crack. So, they removed it with a heat gun. How do you go about cleaning the leftover residue? Just curious. Thanks.
ttf said:
Can you share a photo taken with the camera? it'll help to figure out what's happening.
Maybe some clues :
- If the lens is made with other material than glass they are heat and chemicals sensitive
- Some humidity got under the lens
- Deep scratch on the lens
- The lens barrel moved for some reason (pushed or not in his rail anymore) or is not calibrated anymore
(btw never use Q-tips to clean lenses they can scratch the lens and coating - Use optical cleaning paper)
Click to expand...
Click to collapse
Thanks for the input. Here's some photos. This is what an image looks like when taken with the camera currently:
Here's a picture taken with my S7, which doesn't have a damaged camera. This is what the image should look like:
Here's a closeup shot of the damaged camera. I haven't put the replacement glass on yet. I am waiting until this issue is resolved.
Looking at that close up shot of the lens, it does look like there's something on it. I can't tell if those are scratches or residue. Any idea what might be a good way to go about cleaning it? It seems like it would be hard to clean something that small with optical cleaning paper, especially since the unit moves. Thanks again!
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
ttf said:
Thanks for the pics.
Somehow hard to figure out if it's some Q-tips dust of some melted plastic coating gel.
Yes it's hard to clean such a little surface but try to wrap your Qtips or a small non abrasive tool with the optical paper, add some 100% ethanol or 98% rubbing alcohol on it.
Do you have a air blower pump for camera?, if yes try with that first and if it still stuck on the lens then something melted, Gel coating? not sure. If it's inside well it's probably some gel...unfortunately there is nothing much you can do but changing the camera module.
Hope it's only dust, good luck.
Click to expand...
Click to collapse
Thanks for the advice! I don't have an air blower pump. Can I use a can of air? Anyway, I'll try these tips when I get back in town tomorrow. Thank you again!
Sure a can of air can do the trick, be careful though, some spray liquid and let some residue, test it on a piece of paper first. Tell us how it goes.
Have you washed the phone with water before the glass broke?
Airman1947 said:
Looking at that close up shot of the lens, it does look like there's something on it.
Click to expand...
Click to collapse
If the gunk doesn't clear with alcohol (e.g. lens cleaner) then it may be that the lens itself is damaged. If the heat gun made the lens too hot it may have damaged the actual lens itself.
That rear glass looks like the coating is flaking. You might need to replace the module. http://www.ebay.com/itm/Genuine-Sam...ont-Rear-Lens-Flex-Cable-Module-/192066941308
Thanks for all the help, everyone! So, I tried cleaning the lens with a can of air, and also with lens cleaner on a Q-tip covered with optical cleaning paper. Same results.
Looks like whatever the problem is, it's gonna require replacing the camera unit Darn, wish I hadn't touched it. Was working fine. Anyway, thanks again!
Thanks for the follow up and sorry to hear it didn't fixed the problem. Maybe you could ask samsung to get you a price quote for the replacement or if you're really adventurous you could buy the camera module as a DIY project, be extra careful though you'll most likely avoid your warranty and the IP67/68 (someone posted a link in the thread for the camera unit), or ask a quote in a 3rd party shop?
Airman1947 said:
Thanks for the reply. Yeah, that is possible. Although if that's the case, I don't know why it won't come off. I haven't actually put the new glass cover over the camera unit lens yet, and I tried cleaning the module lens with a Q-tip. Same result. So, I'm wondering if I damaged the unit, or maybe melted the lens slightly. I guess it is what it is. Thanks again!
Click to expand...
Click to collapse
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
JOFowler said:
I'm having the exact same problem and same question! I just finished replacing my LCD. I took a picture to test it out, before putting the back cover back on, and it worked perfect. Then, I used to the heat gun to replace my camera lens, after putting the new back cover on, and now nothing buy blurry, and even looks like a couple of round water spots. I took the lens back off and tried cleaning it, I've shaken in, reset the camera settings, at this point...I'm afraid I damaged the camera with the heat gun and have to open it back up and have replace the whole camera.
Click to expand...
Click to collapse
Aw man, yeah looks like the same thing happened to you. Yeah, I think that the heat damages the lens on the camera unit. I couldn't find a way to get rid of the blurriness.
I ended up just cashing in on the phone insurance for mine. If you have it, I'd suggest doing the same, unless you're feeling adventurous and wanna try and replace the camera unit. Sorry I can't be more help. Good luck!
I just replaced the back glass and noticed that the auto focus does not longer work. The camera just won't focus at all.
I tried to cover the 3 dots at the back but it didn't fix the problem. Still very blurry picture at any distance.
What went wrong?
Ps: does the camera move in order to focus? Because I think there is a tiny piece of glass between the camera and the plastic edge behind the replaced back glass. I tried to get it out before installing the glass but instead of removing it I somehow managed to dig it deeper. My guess is it could block the camera from moving.
marf3 said:
I just replaced the back glass and noticed that the auto focus does not longer work. The camera just won't focus at all.
I tried to cover the 3 dots at the back but it didn't fix the problem. Still very blurry picture at any distance.
What went wrong?
Ps: does the camera move in order to focus? Because I think there is a tiny piece of glass between the camera and the plastic edge behind the replaced back glass. I tried to get it out before installing the glass but instead of removing it I somehow managed to dig it deeper. My guess is it could block the camera from moving.
Click to expand...
Click to collapse
If the glass was broken and autofocus isn't working, chances are there is glass inside the camera. Parts of the camera do have to move in order to autofocus correctly. I would recommend taking off the glass, turning the phone upside down(so the camera is facing the ground), and hitting the phone hard( but not breakig it obviously.) This may even work without taking the glass off, you'll just have to try it. This would hopefully knock some of those pieces of glass free.
---------- Post added at 02:32 AM ---------- Previous post was at 02:29 AM ----------
BTW, this could also be caused if the glass is dirty on the side with the camera.
marf3 said:
I just replaced the back glass and noticed that the auto focus does not longer work. The camera just won't focus at all.
I tried to cover the 3 dots at the back but it didn't fix the problem. Still very blurry picture at any distance.
What went wrong?
Ps: does the camera move in order to focus? Because I think there is a tiny piece of glass between the camera and the plastic edge behind the replaced back glass. I tried to get it out before installing the glass but instead of removing it I somehow managed to dig it deeper. My guess is it could block the camera from moving.
Click to expand...
Click to collapse
Do you have a link for the rear glass you purchased? I broke mine about 2 months ago and every replacement I've bought is not oem, it has adhesive covering most of the back instead of just on the edges, also there's a hole cut out for one of the sensors when it shouldn't be.
As for your issue, they "windows" for the camera or sensors might be dirty, or even a spec of dust throwing off the auto focus.
shagbag913 said:
I would recommend taking off the glass, turning the phone upside down(so the camera is facing the ground), and hitting the phone hard( but not breakig it obviously.)
Click to expand...
Click to collapse
Lol I wouldn't recommend banging it. Would probably have better success using tweezers and compressed air to remove whatever is there.
fone_fanatic said:
Do you have a link for the rear glass you purchased? I broke mine about 2 months ago and every replacement I've bought is not oem, it has adhesive covering most of the back instead of just on the edges, also there's a hole cut out for one of the sensors when it shouldn't be.
As for your issue, they "windows" for the camera or sensors might be dirty, or even a spec of dust throwing off the auto focus.
Lol I wouldn't recommend banging it. Would probably have better success using tweezers and compressed air to remove whatever is there.
Click to expand...
Click to collapse
Banging it would probably be the best option. If there's tiny shards of glass in your camera your not just going to get it all out with tweezers. Compressed air could work, but if you don't have compressed air banging it (aka lightly tapping the top of the screen to get the glass out) is probably your best bet.
Did OP ever resolve this issue? Dealing with the same thing now...
Same issue for me. Any idea how to make focus works again? I have dirty lens message from time to time... Is focus in lens or laser near the lens?
I'm having the same issue.
marf3 said:
I just replaced the back glass and noticed that the auto focus does not longer work. The camera just won't focus at all.
I tried to cover the 3 dots at the back but it didn't fix the problem. Still very blurry picture at any distance.
What went wrong?
Ps: does the camera move in order to focus? Because I think there is a tiny piece of glass between the camera and the plastic edge behind the replaced back glass. I tried to get it out before installing the glass but instead of removing it I somehow managed to dig it deeper. My guess is it could block the camera from moving.
Click to expand...
Click to collapse
mweiss8 said:
Did OP ever resolve this issue? Dealing with the same thing now...
Click to expand...
Click to collapse
belek1979 said:
Same issue for me. Any idea how to make focus works again? I have dirty lens message from time to time... Is focus in lens or laser near the lens?
Click to expand...
Click to collapse
Hi Guys,
I'm having the same issue. How did you manage to fix it?
Did anyone solve this? I have the exact same issue now.
Same issue here. Anyone got sucess?
Just replaced my back glass yesterday and the focus stopped working, I pray to christ I didn't E-8000 my camera in place Ill take the screen apart sometime soon and let you know If I resole the issue