Hello
I got my oreo update but after installing it it shows me upon unlock device smart unlock i wanna to return iris scanner how to make it again
Regards
Sent from my SM-G955F using Tapatalk
2 Steps
1. :To disable your trusted placed or connected devices you need to remove it so it wont stay unlocked if you at your home for instance.
Go to settings > Lock screen and security > smart lock > remove the items if you don't want to use it you need to remove everything in every category.
2. : To activate iris scanner
Go to settings > Lock screen and security > iris scanner to activate it
Related
[TIP AND TRICK]
[NO ROOT][ADB][WIFI/USB][CMD][WINDOWS]
Unlock Android Phone (Screen) with a PC through USB/WiFi.
Run "Lock and Unlock.bat" to lock/unlock your android phone.
[First Time Set-up]
1. Open Setting folder
2. Run "Change IP.bat" to change your PHONE IP Address. It can obtain from WiFi Setting. This should change everytime when you change your WiFi. Otherwise, it's not necessary.
3. Run "Change XY.bat" to change the coordinate of movement of pointer the moment you unlock your phone. Type in this format : xxx yyy xxx yyy. The first set of "xxx yyy" is the start point of swipe and the second set of "xxx yyy" is the end point of swipe. The value con be obtain from Settings>Developer Options>Pointer Location
4. Back to the root of the folder, run the "Connect.bat"
5. That's all.
[FAQ]
1. No respond after running "Lock and Unlock.bat"?
- Run the "Disconnect.bat" and run the "Connect.bat". And try to run "Lock and Unlock.bat" again.
2. More problem? Email me : [email protected]
[Download]
Download link is at below. Updated 3/9/2014
Created by Henry Lim, Sept 2013
Hey guys,
A few days ago I encrypted my device running the latest Exodus 5.1 with standard kernel. The first few boot ups I had to draw a pattern for boot (in TWRP as well). Now, after a week or so, it doesn't ask me for my pattern anymore. Not on normal system boot, neither in TWRP. But in settings it still tells me encryption is enabled.
Wth? What am I doing wrong?
Cheers
Settings -> lockscreen -> screen lock -> tap on pin / password / pattern (whatever you have set up) -> next screen you can choose if pin/password/pattern should be prompted for at device boot.
Oh, I see. Stupid me. Actually it's good that this is disabled because TWRP unfortunately does not support my 4x4 pattern (any workarounds got this btw?).
But with this option disabled, is the encryption still useful? Probably not right? So if someone steals my shutdown device he can simply access data through TWRP or booting it up, right? Encryption would be useless in this case?
Twrp does support pattern unlock for decrypt since version 2.8.6.0. If your pattern is to swipe the first row from left to right, this would be password "1 2 3" (just like you are swiping over a dialpad).
If you want to secure your data, then you must use a pin/password/pattern lock. If you don't use it, there is no real benefit using encryption.
Yes, TWRP supports 3x3 patterns, but not my 4x4 pattern. So is there any possibility unlocking your pattern via code then? Would it be like this then:
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
And where do I type the code then?
I use a 4x4 pattern lock. I just don't use the option that it has to be entered before boot (after unlocking the SIM card you have to unlock via pattern).
Sorry I misread. Twrp still can only decrypt 3x3 patterns. If your pin/password/pattern is not prompted for at device boot, someone could still access your data through twrp (and e.g. copy it to usb-otg).
Okay thanks. Then I'll hope TWRP is going to be able to decrypt 4x4 soon, so I can enable the boot decrypt. I don't want to go back to 3x3 neither get locked out of my system if I need TWRP to restore, update or whatever.
https://www.google.com/android/devicemanager?u=0
Ask it to ring the phone.
Nothing happens.
Android Device Manager is set up as a device administrator in Settings > Lock Screen and Security > Other security settings > Device administrators
I'm running stock MM 6.0.1
Hi all!
I am trying to get Samsung Flow to work with my Windows 10 Pro laptop but I keep on getting stuck at the Failed to register fingerprints part and I can't seem to get passed that screen no matter what (registered) fingers I use.
Could it be because I'm Rooted and using a custom ROM + kernel?
Thank you!
I am having the same issue on rooted a5 2017
Pls help!
xxxrichievxxx said:
Hi all!
I am trying to get Samsung Flow to work with my Windows 10 Pro laptop but I keep on getting stuck at the Failed to register fingerprints part and I can't seem to get passed that screen no matter what (registered) fingers I use.
Could it be because I'm Rooted and using a custom ROM + kernel?
Thank you!
Click to expand...
Click to collapse
satnavpt said:
I am having the same issue on rooted a5 2017
Pls help!
Click to expand...
Click to collapse
Are you on the Creators Update? I believe I read you need to be on it for it to work or that might have been to sync between your phone and PC. Could be Know is tripped and it needs a secure login to work.
i'm on creators update (build 16237) and use a NON rooted s8+.
i get the same error, so there must be something else wrong!
A. For Windows Pro > enable secondary authentication
1. Select search box on the Windows task bar
2. Enter "gpedit.msc" and press enter key
3. Go to the "Local Computer Policy -> Computer Configuration -> Administrative Templates -> Windows Components -> Microsoft Secondary Authentication Factor -> Allow Companion device for secondary authentication"
4. Double-click the "Allow Companion device for secondary authentication"
5. Select "Enabled"
6..Select search box on the Windows task bar.
7. Enter “gpupdate /force” and press enter key
B.The phone return an authentication error code.(my phone was rooted and registered the fingerprint after reset to defaults)
qwess said:
A. For Windows Pro > enable secondary authentication
1. Select search box on the Windows task bar
2. Enter "gpedit.msc" and press enter key
3. Go to the "Local Computer Policy -> Computer Configuration -> Administrative Templates -> Windows Components -> Microsoft Secondary Authentication Factor -> Allow Companion device for secondary authentication"
4. Double-click the "Allow Companion device for secondary authentication"
5. Select "Enabled"
B.The phone return an authentication error code.(my phone was rooted and registered the fingerprint after reset to defaults)
Click to expand...
Click to collapse
I'm having the same problem on my g935FD (Galaxy S7 Edge Duos, exynos) I walked through your steps to enable secondary authentication but still got the same error. I also have rooted and installed a custom rom. Do I need to restart my phone/computer?
I'm not sure what the second part of your message means. Do you have to reset your phone?
I tested with two phones(S6 Edge and Note 5), both with root, the registration issue on both, fingerprint scan fail in Windows side.
After I reset one to factory settings (only wipe cache partition does not work) with unroot complete (My Note 5), the registration of the fingerprint in PC worked very well.
Debug log can be sent to the developer:
[How to collect Samsung Flow logs]
1. Download "SamsungFlowLogCollector" , unzip
2. Launch "SamsungFlowLogCollector.exe"
3. Check the "Turn on/off logging" check box.
4. When "The reboot is required to take effect." popup show, select the "Yes" button.
5. Restart your device.
6. Reproduce the problem steps. Launch Samsung Flow. Try to register device.
7. Launch "SamsungFlowLogCollector.exe" again.
8. Select the "Collect Logs" button.
9. Uncheck the "Turn on/off logging" check box.
10. Share the created file(.sfel) to developer..
I'm on a galaxy s6 (7.0) rooted with magisk. I also get the same error .I tried to use magisk hide but this does not seem to matter.
register fingerprint fails with rooted phones!
For rooted devices the only way to register is:
1.Delete fingerprints saved on mobile device.
FLOW apps > Try to register device (without fingerprint)
2.After device has successfully registered with CDF (companion device framework), set it back a fingerprint to unlock phone.
Logging into windows is possible if the mobile device is unlocked- with fingerprint.
Tested with:
Windows : Samsung Flow app v.2.0.79.0, Driver v.2.0.1.6
Android: Samsung Flow v.2.0.41
sorry 4my bad english
---------- Post added at 11:22 PM ---------- Previous post was at 10:57 PM ----------
saluja04 said:
Do I need to restart my phone/computer?
Click to expand...
Click to collapse
No need for restart PC, just update group policy:
Select search box on the Windows task bar.
Enter “gpupdate /force” and press enter key
saluja04 said:
Do you have to reset your phone?
Click to expand...
Click to collapse
yes and unrooted.
qwess said:
register fingerprint fails with rooted phones!
For rooted devices the only way to register is:.....
Click to expand...
Click to collapse
thanks for sharing, i'm able to connect without fingerprints. added fingerprints back and so far, no issue.
just delete old pin code ,and re-create a pin
XDACXW said:
just delete old pin code ,and re-create a pin
Click to expand...
Click to collapse
Thanks alot man! I have struggled with this for a month or so! Such an easy thing. Thanks!!
i have a rooted Samsung galaxy s8+ and i get an error saying samsung flow doesnt work on rooted devices, Is there any way to bypass that?
To get rid of the annoying bloatware app that comes with Blackshark 4/Pro [Global/CN ROM] as well as gets free-RAM space and secure some privacy. Here is the simplest & efficient method to do.
Requirement: -
PC/Laptop
USB cable
OpenJDK Software
Xiaomi ADB & Fast boot Tools Software
How to prepare USB debugging: -
Go to Setting > My devices > All Specs > Press on Build Number (7-times until you see the message “you are now developer)
Go to Setting > Additional Setting > Developer Options > Press OK > Enable both USB debugging & Install via USB
Connect the phone to PC via USB cable > Allow USB debugged connection to PC.
From PC, Download “OpenJDK” > Install it.
Run “Xiaomi ADB & Fastboot Tools.jar” > Confirm your BS4/Pro connection first. [Serial/Codename appear on top left screen]
To Uninstall Bloatware: -
Go to ADB Tab > Uninstaller Tab > Select the desired app to delete > Press Uninstall.
To Reinstall Bloatware: -
Go to ADB Tab > reinstaller Tab > Select the desired app to reinstall > Press Reinstall.
To Disable Bloatware Services: -
Go to ADB Tab > Disabler Tab > Select the desired app to Disable > Press Disable!
To Enable Bloatware Services: -
Go to ADB Tab > Enabler Tab > Select the desired app to Enable > Press Enable!
Note:
# Bloatware app can be optionally restored from the reinstall tab.
# Choose your list with care & the safe list is included within the attached photo.
# This method efficiently stops bloatware/services and preserves RAM-Space.
# Uninstalling bloatware app won’t be re-installed automatically after phone update.
# Disable services app won’t be enabled after phone update.
Thank you! <3
I'm using this on my BS5 and it works... except that Cleaner isn't being displayed for me to remove. I've used the built-in browser and navigated to the apk and pulled it so I could add it manually but I'm getting no joy.
Any one know how to delete this spyware?
black shark 4s đươc không
9