Wondering if many others of you have run across this, what causes it, and how to avoid it. Basically, I download the factory image from google's image page, flash-all using adb/fastboot. All looks good, every part of installation says OKAY, no fails. Then upon reboot it goes back to bootloader, but now with a yellow banner at the bottom - ERROR: LoadImageAndAuth Failed: Load Error. Sometimes the banner reads ERROR: Slot Unbootable: Load Error. (see attached pictures)
There's no way out of it, flashing images, bootloader or boot.img or whatever separately, flashing twrp, switching between a/b partitions, nothing changes it. Adb/fastboot is current. It's happened after regular flash-all, it's happened when "-w" is removed. It's happened with and without twrp installed. This last time I tried to avoid it by updating without flashing the image, removed twrp and tried to sideload the OTA in stock recovery, which also landed me in the same spot, in the bootloader with that yellow banner of death. Been hit by this using Dec., Feb., and March updates. I stayed on the Dec. update for a while because I've been afraid of it happening again... sure enough it did.
I've replaced a few pixel 2's because of this, every time Google willingly stands by their product and replaces it. One google worker told me this is a known issue they were working on, others said it isn't, and none have provided an explanation for why it happens or how to avoid it. I assume it's some kind of instability with the a/b partition system. I did the same process with my N5x a couple days ago (flashed image then added twrp, magisk, all that stuff) and as usual everything went swimmingly. Tried just flashing current image on p2 the next day and another one bit the dust. Another replacement is on its way now.
So I turn to you. Any of you run into this? What causes it? How can I flash updates without this happening again?
As you know, this happened to me partially. One of my bootloader slots is messed up. Just remember that you can always plug into USB and skip the bootloader and just boot using the boot.img directly.
fastboot boot boot.img
OR if you use Magisk...
fastboot boot patched_boot.img
This of course gets you booted up, so you can get your data backed up or whatever. You're basically tethered to a computer if you ever have to reboot or get back up after a power off.
I think I'll wait another month before having Google replace mine.
deepdvd said:
As you know, this happened to me partially. One of my bootloader slots is messed up. Just remember that you can always plug into USB and skip the bootloader and just boot using the boot.img directly.
fastboot boot boot.img
OR if you use Magisk...
fastboot boot patched_boot.img
This of course gets you booted up, so you can get your data backed up or whatever. You're basically tethered to a computer if you ever have to reboot or get back up after a power off.
I think I'll wait another month before having Google replace mine.
Click to expand...
Click to collapse
Tried boot.img but not working for me, still stuck in bootloader. But good to know, I didn't realize that was a possibility. Sucks having to be tethered like that though. I backed up double before messing with it, both nandroid and titanium, expecting I might run into this again.
The replacement process is relatively painless, only takes like 3 days to get a new one. Just be sure to do it while covered under warranty.
Hope it works out. To have this happen to several replacements is either extremely bad luck, or some unknown external factor.
clcdev said:
Hope it works out. To have this happen to several replacements is either extremely bad luck, or some unknown external factor.
Click to expand...
Click to collapse
Thanks man, seems like it since not many people are experiencing this. Can't think of what external issue it could be other than something with my computer, but im sure not having any troubles doing the same stuff and more on my nexus.
@trhacker01, have you tried flashing the latest full OTA image through recovery twice first (so that both partitions are updated) and then using the factory image? I had a similar (not same) issue where is displayed an empty yellow warning bar and did not let me update the bootloader, but after doing this, I no longer have this issue.
craigacgomez said:
@trhacker01, have you tried flashing the latest full OTA image through recovery twice first (so that both partitions are updated) and then using the factory image? I had a similar (not same) issue where is displayed an empty yellow warning bar and did not let me update the bootloader, but after doing this, I no longer have this issue.
Click to expand...
Click to collapse
Well I tried flashing the ota in recovery and that's what triggered it this last time. But I didn't try doing each partition, maybe that's where it went wrong
Every update bricks me when I try flashing an OTA.
Pretty sure I had both of those errors. One for Feb, other for March.
Fastboot full factory image -w and back to normal, then reinstall twrp.
Going forward I will just plan on using the full factory image.
COMpulse said:
Every update bricks me when I try flashing an OTA.
Pretty sure I had both of those errors. One for Feb, other for March.
Fastboot full factory image -w and back to normal, then reinstall twrp.
Going forward I will just plan on using the full factory image.
Click to expand...
Click to collapse
That's what gets me, can't simply fastboot the image to recover, that fail-safe isn't reliable for me.
Got the replacement and set it up so I can update normally. Just booted twrp but didn't install, so I could flash magisk. With no twrp and easily uninstall magisk I can just update via regular OTA when it shows up. Then temporarily boot twrp again to reinstall magisk. Just did that for the March update and worked fine.
A little inconvenient of a workaround but I'm updating without concern about this image flashing problem.
I have the exact same problem as first post, even same picture yellow banners. I have tried everything too.
I removed using automatically remove Magisk rooted through Magisk Manager. I liked the edge plus modules.
I was going to Android P with alt flash bat/All and (-W) edit to keep the perfectly working Jan updates.
First of above troubles.
I then went back and tried all updates of 2018.
Same steps as above, re updated everything, different USB port, cable a no go.
The load boot from Fastboot is a no go. Deuce's scripts no go. Manual install of all files (instead of) bat file commands no go.
I bought device through Project Fi, so first go around for return is now escalated and awaiting further return of device.
Looking at web searches used what I could find for return to normal complete image install, NO GO.
Maybe I have the early reports of Flashing Factory Image files =return device= that a few users had back in Nov 2017.
kkjb said:
I have the exact same problem as first post, even same picture yellow banners. I have tried everything too.
I removed using automatically remove Magisk rooted through Magisk Manager. I liked the edge plus modules.
I was going to Android P with alt flash bat/All and (-W) edit to keep the perfectly working Jan updates.
First of above troubles.
I then went back and tried all updates of 2018.
Same steps as above, re updated everything, different USB port, cable a no go.
The load boot from Fastboot is a no go. Deuce's scripts no go. Manual install of all files (instead of) bat file commands no go.
I bought device through Project Fi, so first go around for return is now escalated and awaiting further return of device.
Looking at web searches used what I could find for return to normal complete image install, NO GO.
Maybe I have the early reports of Flashing Factory Image files =return device= that a few users had back in Nov 2017.
Click to expand...
Click to collapse
Added: found I my bootloader was failing on updating. Fastboot message= (bootloader) Updating partition=0 Failed
(remote:Command Flash Error).
Some how thought to look over deuce flash all scrip instructions and followed exactly, which seemed strange to add script to expanded image file. Well even with lot's of error returns from running. Used same image that was installed Jan 1.17xx019.013 fixed bootloader and worked.
Odd that was not the usual process, but it WORKED.
kkjb said:
Added: found I my bootloader was failing on updating. Fastboot message= (bootloader) Updating partition=0 Failed
(remote:Command Flash Error).
Some how thought to look over deuce flash all scrip instructions and followed exactly, which seemed strange to add script to expanded image file. Well even with lot's of error returns from running. Used same image that was installed Jan 1.17xx019.013 fixed bootloader and worked.
Odd that was not the usual process, but it WORKED.
Click to expand...
Click to collapse
Wow great to hear it worked! I tried the deuce script but couldn't get it to work either. I heard there was an issue with the bootloader in December and was supposed to have been fixed in January. But that bootloader error was one that I was also getting after the yellow banner started showing up, even on this last go around. Just before the initial bricking fastboot was reporting all successful on the flash.
More of my troubles
I have twrp 3.2.1-2, Magisk v16.1(1610) Jan 18 8.1.0. The device is working as before. So to recap...first post is what I HAD. My bootloader is stuck on 002.0059.00 this is the one from opd1.170816.025 which is 8.0.0 Nov 17. This some how flashed through Deuce's script and stuck. Now of course nothing will flash with Factory images because I have a botched up Boot.img. From looking back the trouble started with going to update to P. Removed Magisk through manager. It "patched" boot but some how on mine (with flashed twrp) recovery caused a flag I guess to set.
So some point I'm going to get Magisk to patch current Factory Boot.img 002.0067.00 which is in Feb, Mar 18 and P.
Need time to read though Magisk or wait for others to experience. I believe this is the warning message of TWRP and Pixel 2 A/B slots.
update to my troubles
If you have watching as myself to correct the troubles I'm having: recap: Bootloader is not flashing to current one
I'm stuck on 0059. I get a flash fail message (bootloader) ( remote:Command Flash Error ) Bootloader A 200002000 SZ=0000B000. Stuck on bootloader screen only.
Corrected back to before still broken flashable bootloader 0059. Used install TWRP and Magisk. Which I had before trying to update from Jan 18 update. So works as before..
I tried a path to some how get back to correct. So flash current tdbo and boot.img and bootloader. WRONG white G screen only.
So fastboot back into twrp.img use install script zip, install Magisk nogo.
So caution DON'T do it my way.
I was lucky I had a back up twrp file from a month ago. Now at least back to "working"
opm1.171010.013. again that is bootloader 0066 but mine is 0059....
kkjb said:
If you have watching as myself to correct the troubles I'm having: recap: Bootloader is not flashing to current one
I'm stuck on 0059. I get a flash fail message (bootloader) ( remote:Command Flash Error ) Bootloader A 200002000 SZ=0000B000. Stuck on bootloader screen only.
Corrected back to before still broken flashable bootloader 0059. Used install TWRP and Magisk. Which I had before trying to update from Jan 18 update. So works as before..
I tried a path to some how get back to correct. So flash current tdbo and boot.img and bootloader. WRONG white G screen only.
So fastboot back into twrp.img use install script zip, install Magisk nogo.
So caution DON'T do it my way.
I was lucky I had a back up twrp file from a month ago. Now at least back to "working"
opm1.171010.013. again that is bootloader 0066 but mine is 0059....
Click to expand...
Click to collapse
That's pretty slick that you got it working again, especially with the bootloader error. I didn't think you could get the current OS working with an old bootloader at all. Hopefully at some point you will be able to update it all the way.
I soft bricked it..so don't do this.
See previous to catch up. Since I pulled the plug and had a Google Warranty phone in hand...21 hours later!
I decided to do all the things NOT TO DO.
Pulled factory Image file from last bootloader with 0059 bootloader.. Nov 17
Flashed tdbo.img, boot.img.
Didn't change same Flash failure device return message. Had to boot TWRP, flash twrp to get working again. Since phone needs to return for credit.
Nothing to lose, I have been on slot = A always. Moved to slot = B....
Now it is a brick.
First couple of power cycles, one line flash, vibrate. Then after 3-4 more cycles no more vibration. longer time to one line flash.
Warm to touch, overnight charge. Same.
So message is to keep backup of files used in first portion of Magisk and twrp installs. Must follow instructions if want to remove Magisk root.
Somehow my problem is a weird one off with the bootloader oddity.
Related
FINAL EDIT: FIXED!!! Sparsechunk files 1,2and 3 have to match the exact name with the firmware folder sparsechunk files.
I did not notice that my firmware sparsechunk files ended in .0 .1 .2 and not 1 2 3 like the tutorial had listed, so I was fastbooting the wrong sparsechunk command. That was the final fix that finally worked for me.
Original post:
SHORT VERSION:
My god this has been one crazy root journey.
I have done absolutely EVERYTHING I could pull up on google to fix my phone, and what seemed to be the final piece to the puzzle, still has not fixed anything.
My phone is bricked, and i would really appreciate help at this point.
The current problem:
When I turn on my phone, it vibrates, and displays the WARNING BOOT LOADER UNLOCKED screen, and stays there forever.
I can access my boot loader, and recovery, but I dont know what to do at this point.
I tried a quick flash stock recovery kit kat with moto tool AIO, and it didnt help.
Any ideas?
LONG VERSION (backround info may help to understand the current issue)
Now, if you want to know what began all of this, continue reading, otherwise the above is my current issue.
After successfully unlocking and rooting my phone
I downloaded SWITCHME, an app that lets you create multible users on the phone. the instructions say that you can use a sub account to test and mess around with anything because you can simply go back to the admin account that has everything untouched.
That was a lie.
1.I deleted .setup, along with a few other things THAT WHERE NOT FLAGGED AS IMPORTANT, assuming the phone would still work. and my phone went bonkers, displaying this infinite message: UNFORTUNATELY, SETUP HAS STOPPED. It was impossible to use the phone, and I could only access bootloader.
2.After endless googling, driver downloading, xda mod installing, I managed to set up my boot loader to do the guide restore stock firmware:http://forum.xda-developers.com/showthread.php?t=2542219
Sadly, I flashed the wrong model number package, I was flashing x35, when I later discovered that my phone is x45.
Flashing the x35 firmware bricked my phone further, to where it would "fail to boot up" and would only display bootloader over and over after attempting to turn the phone on.
3. Simple, I realized I flashed the wrong thing, so I downloaded the x45 firmware from the firmware teem on this website, flashed all of the commands, and bam, the phone starts up with the boot loader warning, and DOES NOT get stuck in the previous boot loader issue I had.
But now the phone wont get past that warning screen so... now im pissed.
Please, if anyone can help me I would greatly appreciate it, Im so close to getting my phone back...
EDIT 2: Looks like the phone wont stay shut down, I realized that if I dont open up boot loader, it will turn itself on and display the warning message.
EDIT:
The stuffs I have, ready to try anything:
CWM touch mod
Moto Tool AIO
Minimal ADB and Fast boot
RETUS x1045 factory firmware
All directories, folders, cmd commands are set up and working properly between all of the programs.
The phone appears to be responding to all cmd commands properly.
I also have the windows one touch super boot root method. (he superboot-windows.bat )
Im afraid to try anything major after freshly flashing the x45 firmware that seemed to bring me one step closer without the help of someone else.
I restored stock to my phone using this link yesturday http://www.ibtimes.co.uk/how-restore-motorola-moto-g-stock-firmware-1447290
it may work for you
I have almost the same problem as if the fastboot not install anything despite not display errors
great that you got it done.
maybe my few cents about my "bricking" story. (xt1032 moto g)
yesterday i wanted to change the rom from cm11 nightly to another custom rom like ehndroix/carbonrom...
first i thought that will be done in a few mins, after having already flashed a custom rom.
then the story began, getting adb work, but, 2weeks ago everything was setup and went fine. dunno why my laptop lost the "drivers".
thats the link which solved that problem: tinyurl . com / kgffjh4 [sorry cant post links outside of xda yet, spam protection]
so after a few hours of getting that fixed i, i began flashing.
suddently i got stuck in bootscreen (ehndroix logo for example)...
then i wanted to go back with my previous backup made internaly of clockworkmod. though i couldnt restore my backup because there was an error message while restoring /data of my backup
also when restoring to factory/wipe in cwm there was that error message about clouldnt "touch" /data, i dont remember the message exactly.
after thinking i bricked everything, i though lets wipe my internal sdcard, maybe that causes the /data error.
then i restarted the device and went for a shower... after 15min i came back and my device was "started".
now i dont know that exactly helped, maybe wiping all data on my phone, or just letting my device boot for a "long" time...
so, thats my yesterdays brick story.
do a factory reset if the bootloader has that option.. otherwise install or run/boot a custom revovery, then either
try the factory reset option there and reboot or..
wipe everything and install a rom
Ok try this, I'm was a victim too:
Relock and unlock bootloader
Download and flash latest Philz
From there format everything...EVERY PARTITION...switch F2FS
After switching wipe every partition again
Select and execute the other 3 wiping option ie., Clean to install new ROM and the other 2 (I can't remember now)
Do this all over again via TWRP too
Now, this is important, don't use the mfastboot for restoring stock...use the one provided by Google for its Android SDK
Flash the stock images
Flash the Moto Razr boot animation and not the one for Moto G to remove the warning sign
I'm 99.99% sure your phone will boot properly
After the phone boots, reflash the Moto G bootanimation
Good Luck!
ngr.hd said:
Ok try this, I'm was a victim too:
Relock and unlock bootloader
Download and flash latest Philz
From there format everything...EVERY PARTITION...switch F2FS
After switching wipe every partition again
Select and execute the other 3 wiping option ie., Clean to install new ROM and the other 2 (I can't remember now)
Do this all over again via TWRP too
Now, this is important, don't use the mfastboot for restoring stock...use the one provided by Google for its Android SDK
Flash the stock images
Flash the Moto Razr boot animation and not the one for Moto G to remove the warning sign
I'm 99.99% sure your phone will boot properly
After the phone boots, reflash the Moto G bootanimation
Good Luck!
Click to expand...
Click to collapse
I try to flash any recovery but after entering I get an android and says no commands, and installation does not throw errors
angelgzg said:
I try to flash any recovery but after entering I get an android and says no commands, and installation does not throw errors
Click to expand...
Click to collapse
You're still in stock recovery.
Use fastboot flash recovery xyz.zip to flash philz recovery
Use this when you're in bootloader mode.
ngr.hd said:
You're still in stock recovery.
Use fastboot flash recovery xyz.zip to flash philz recovery
Use this when you're in bootloader mode.
Click to expand...
Click to collapse
I flash the recovery but rebooted into recovery, the android keeps popping up (no commands)
FINAL EDIT: FIXED!!! Sparsechunk files 1,2and 3 have to match the exact name with the firmware folder sparsechunk files.
I did not notice that my firmware sparsechunk files ended in .0 .1 .2 and not 1 2 3 like the tutorial had listed, so I was fastbooting the wrong sparsechunk command. That was the final fix that finally worked for me.
Sorry I'm traveling a d couldnt update thread fast enough.
Hi folks,
I'm a little kerfluffled if you will by the sheer number of threads - search isn't pointing me to a thread that deals with this - so apologies if this has been answered before.
I originally rooted my phone with towelroot. I kept stock but installed a few things like Xposed, greenify, gravity box, etc... (also i switched to ART some time back).
Once i received the OTA notification, I deactivated greenify and gravity box, then uninstalled them, then "unrooted" the phone using SuperSU. I did forget to reset my "startup animation" but otherwise everything seems fine. The root checker confirms that the phone is no longer rooted. Since i forgot to backup the stock animation i just renamed the .zip and now when i boot the animation just says Android (with a little animation regarding the color of the letters).
I then DLed the update, restarted and approximately 30 ~ 40% of the way through the update screen it freezes up and then i get the little android dude with his belly open and the red error triangle. The text below says "error" but provides no further information. The only way to resolve the issue is to power off the phone and then turn it back on. It goes back into 4.4.4 and works fine but i can't get past that error and have no idea how to tell what the error actually is.
Any suggestions will be appreciated! I would prefer to not have to wipe my phone if at all possible.
You'll must wipe your phone as I am. Then you'll be able to OTA update your phone.
I do exactly like you, but error appears every time in the middle of update process. After wipe everything was fine
Fastboot flash the new factory images one by one. Reboot the bootloader in between each image, just to be safe. Then use chain fire auto root. It'll take you about 20 min. You will lose all info on your device though.
To save your information, you need to get back to totally stock, unmodified 4.4.4. So flash that in fastboot, just don't flash the user data. Then you can accept the ota.
Even modifying the boot image will cause an ota to throw out an error.
Lokke9191 said:
Fastboot flash the new factory images one by one. Reboot the bootloader in between each image, just to be safe. Then use chain fire auto root. It'll take you about 20 min. You will lose all info on your device though.
To save your information, you need to get back to totally stock, unmodified 4.4.4. So flash that in fastboot, just don't flash the user data. Then you can accept the ota.
Even modifying the boot image will cause an ota to throw out an error.
Click to expand...
Click to collapse
Since I'm not concerned about root in Lollipop for now - if i can find the original boot animation and "reinstall it" so to speak - will that allow me to use the ota without having to wipe my phone?
Not for sure. To guarantee it will work. Fastboot flash 4.4.4 system.img, boot.img, and recovery.img.
Lokke9191 said:
Not for sure. To guarantee it will work. Fastboot flash 4.4.4 system.img, boot.img, and recovery.img.
Click to expand...
Click to collapse
okay thanks! i'm going to try and find the original boot animation somehow and if that doesn't solve the problem, i'm going to fastboot everything.
Just dont flash userdata, or you'll lose your setup.
Lokke9191 said:
Just dont flash userdata, or you'll lose your setup.
Click to expand...
Click to collapse
thanks mate!
Google Play Store Pixel, stock feb update (nof26v), unrooted, unlocked bootloader. There's a longer back story to this issue I've encountered, but to cut to the chase:
I can successfully flash TWRP 3.0.2 RC1 and 2.79 SR3. I can boot into system and enjoy benefits of root. However, I've noticed that whenever I try to reboot SYSTEM, it only boots into recovery. Even when I boot into bootloader and flash stock boot.img, it'll just reboot into stock recovery, but never into system. My way out of this quasi soft-brick state is to flash stock boot.img and sideload ota and I'm good to go with all my settings/data intact, I'll just be unrooted (as expected). I can verify it survives reboot in this state.
Has anyone else encountered this before? Is there something in the latest SU that won't let it reboot properly? Is there a way I can force it to reboot a certain slot to somehow avoid this issue?
The way Android handles memory now, I don't ever feel the need to reboot. But one of the things that's essential for me is to edit build.prop to enable wifi tether and miracast. Thing is, it requires a reboot for those changes to apply, but as soon as I reboot...
I've had this all working before on the dec update and SuperSU-v2.79-201612051815.zip but then something really strange happened (long backstory referenced above) and it required me to have to re-root, only now it won't survive reboot.
Any insight is greatly appreciated!
I have never encountered this issue as a result of flashing Super SU. I have come across this when I updated to the latest image by just flashing a few components.. IE: i didnt flash the whole factory image.
Flashing the latest factory image to both slots and starting over fixed the issue for me.
Flash the image (flash_all.bat) then fastboot boot twrp and switch slots, flash factory image again.
Just my two cents.
k.s.deviate said:
Flashing the latest factory image to both slots and starting over fixed the issue for me.
Flash the image (flash_all.bat) then fastboot boot twrp and switch slots, flash factory image again.
Just my two cents.
Click to expand...
Click to collapse
Thanks for your input! Should I remove -w while flashing, or when you said starting over do you mean full wipe?
Was hoping to avoid going that route... Is there any way to salvage without wipe?
Let me also share the strange event I encountered which led me to this point:
As stated, I had December update with stable 2.79 and TWRP 3.0.2. I skipped Jan update and was planning to do the same for the Feb update, but for whatever reason, I went to check updates (knowing full well it wouldn't take since I'm not on stock recovery). It gave me the standard "downloading, installing..Oops, there's a problem" prompt and I went on my merry way.
A week or so later, I decided to manually reboot and upon boot, I noticed it said "Android is starting/configuring" something along those lines. Then I tried double tap to lock (Nova gesture) and it says phone wasn't rooted. I check and sure enough, no SU icon. Checked Android version and now it says I'm on Feb update.
Attempt to install latest from chainfire on play store and no dice. Decide to flash it instead. Downloaded 2.79 SR3. Booted temporary TWRP and flashed the install and SU and then I found that phone won't boot to anything but recovery. Now anytime, I modify the boot image in any way, I'm bricked on subsequent reboots until I flash stock boot image and sideload OTA.
How do you think the Feb update installed when it shouldn't have? Did it install to one slot while my other slot was TWRP+root?
I would guess that it may have installed onto the inactive slot, but it doesn't sound like it should have if you had TWRP and Su installed. However we are all still learning new things about the pixel every day.
I would recommend clean flashing the factory image to both slots and starting over. Sounds like something became corrupt.
What version of ADB and Fastboot are you running? This reboot to bootloader happened to me when I unknowing using an older version.
Try wiping the device completely push your factory image via ADB and fastboot and installed of TWRP RC1 use alpha 2 never had a issue with alpha 2 after flashing TWRP boot into stock then go back into TWRP then flash SuperSU
jamespark said:
How do you think the Feb update installed when it shouldn't have?
Click to expand...
Click to collapse
People have reported automatic OTA updates on rooted Pixel phones. You can shut off automatic OTA updates by following the following link. People report still getting a notification for updates after the setting change, but updates no longer happen automatically. The site below also lists a way to entirely shut off OTA notifications, yet that change causes my phone to stay awake constantly and never go into deep sleep, so I only recommend the link. There's a thread or two about FlashFire, which I may eventually get around to trying.
https://www.androidexplained.com/pixel-disable-ota-updates/
Are you okay with losing data? I can post the links I used to download SuperSU and a little guide to flash to stock and reroot. Maybe you'll be able to figure what you're doing wrong or just doing what I do step by step might fix it.
mngdew said:
What version of ADB and Fastboot are you running? This reboot to bootloader happened to me when I unknowing using an older version.
Click to expand...
Click to collapse
Definitely using an older version of adb and fastboot. I'll update and retry with the latest, thanks for the suggestion!
alluringreality said:
People have reported automatic OTA updates on rooted Pixel phones. You can shut off automatic OTA updates by following the following link. People report still getting a notification for updates after the setting change, but updates no longer happen automatically. The site below also lists a way to entirely shut off OTA notifications, yet that change causes my phone to stay awake constantly and never go into deep sleep, so I only recommend the link. There's a thread or two about FlashFire, which I may eventually get around to trying.
https://www.androidexplained.com/pixel-disable-ota-updates/
Click to expand...
Click to collapse
Thanks for the heads up! I had this setting enabled and I have since disabled it.
I really appreciate the community and all your help!
SOLVED
I'm pleased to report that I now have root that survives reboot!
- From stock: flashed TWRP and SU. verified root, edited build.prop and reboot system..... boots into recovery (the usual problem)
- switched active slots and flashed SU, reboot
- SU icon in app drawer but when launched: "supersu binaries not installed"
- reboot into recovery and flashed su, reboot
- su is installed, but build.prop changes didn't stick. edited build.prop, reboot system
- boots into recovery.
- flashed su, did NOT reboot, backed out, switched slots, flash SU to the other slot, reboot
- huzzah!
is it verified that android will alternate active slots upon each subsequent reboot (i.e. A/B/A/B/...)?
it would seem I was making changes and rebooting to the other slot which was jacked up, so I had to finally apply the same changes to both slots and now everything is working!
I honestly don't know what I just did, and I guess sometimes it's better to be lucky than smart lol but, boy, this two-system partition is a piece of work...
Thanks again to everyone for all your help!!
Dear oneplus community,
the recent days I wanted to update my stock system and keep my magisk at the same time. But somehow things messed up and lost my root status so I had to go back and flash magisk via twrp again. Since I didn't install twrp as default recovery, I had to boot manually into it.
Here is one of the first issues: the command "fastboot boot recovery.img" had an output line which said that the file is unauthorized. That is quite a common error so I booted into twrp via the all in one tool. Alright here I am in the recovery, ready to install magisk again as usual. Now I am facing the unable to mount vendor, storage and system error, so I fixed it by going to exfat and back to ext4 if I am correct.
Now somehow things messed up even more because at this point I was stuck in a boot loop. I managed to get out of it with the MSM back to stock method.
So in the end I got a stock android 10 oxygenos system I want to have magisk on it again. But when I try to get into the recovery mode sometimes itll work and sometimes it wont. Sometimes the command prompt gives me the unauthorized error message again and sometimes I get stuck in the fastboot mode screen with the oneplus logo.
Eventually I get into the recovery by using various methods e.g. all in one tool, but also here it happenes that the command prompt gives me the unauthorized error.
At this point everything seems to be okay with the installation of magisk (no errors, etc.). But when I'm trying to boot up from the recovery it says that I have no OS installed whether I have magisk installed or not. In a second and third try I additionally tried to flash a rom before installing magisk so I am sure to actually having a OS installed. But it still gives me the same error.
Any ideas how to deal with that, so that I can install magisk on my stock rom properly without having these weird issues.
At this point I'm losing the belief in myself because it shouldn't be that hard at all, since I already rooted my previous phones like mi6 the oneplus 6 haswell..
I will post error codes later.
Thank you.
I actually just started a thread about installing TWRP and magisk yesterday. I am having the same problem installing. I assume it's the versions of each file that I am using that are incompatible, because I am following the instructions as written.
https://forum.xda-developers.com/oneplus-7-pro/help/current-twrp-magisk-unlocked-oneplus-7-t4094307
At this point, since no one seems to know what the problem is, I'm just gonna stay on stock, unlocked bootloader, no root. Which defeats the purpose of even having an unlocked bootloader, but at least I'll have functioning phone. If you need to install an OS on your phone, follow this method.
https://forum.xda-developers.com/oneplus-7-pro/how-to/bricked-oneplus-7-pro-stuck-fastboot-t3972469
This will get you back to factory settings, unlocked bootloader.
+1 here, actually quite confused how to get TWRP properly so it sticks, amd confused about two slots situation.
Now going back to stock via MSM Method. Im in a bootloop/bricked device again.
I'll try to do it one more time and i'll document my steps detailed, so more experienced users can follow the steps better.
Silencex33 said:
Now going back to stock via MSM Method. Im in a bootloop/bricked device again.
I'll try to do it one more time and i'll document my steps detailed, so more experienced users can follow the steps better.
Click to expand...
Click to collapse
Get twrp from here https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3932943. 3.3.1-79
im about to try this on my tmob oneplus 7 pro, any suggestions as to if I should wait for new updates ?
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
kozaqu said:
Hi,
I think the problem is in the modified .dtb try flash the original file.
Or : https://forum.xda-developers.com/showpost.php?p=82359331&postcount=39
greetings
Click to expand...
Click to collapse
That got me in the right direction and I can at least get back into recovery now. Thanks! :good:
Also in the same boat
mkhopper said:
Well, not fully bricked, but it's completely non-working just the same.
I've had the K1 for a few years now and have been fine with the standard, stock OTA updates. Recently though I've been seeing constant notifications that I'm short on ram and after uninstalling apps, deleting old files, it would work ok for a few days and then start complaining about low memory again. So I figured that something must be corrupt and now is a good a time as any to root and see about flashing a new rom.
I've owned many android devices over the years and have rooted and patched most of them. so I'm familiar with the tools.
This time however, I think I must have crossed something up somewhere.
What I did was this:
Grabbed the minimal ADB package and fastboot drivers.
Booted into the bootloader and ran the fastboot oem unlock. No problem.
From the nVidia site, I then grabbed and flashed the latest stock image and recovery, just to ensure I was on a clean slate. No problem.
Flashed the latest TWRP for the device. No problem.
Flashed SuperSU. No problem.
Booted into the stock system to make sure everything was still working and it was. But, this is the start of where I maybe hosed things up(?).
While running stock, I converted the SD card to internal memory, just so I wasn't having to mess with it later, not thinking that I'd have to do it again anyway after flashing a new rom.
Rebooted back to TWRP and proceeded to flash the new rom (AOSP Extended (AEX) 5.8).
I flashed it by way of the sideload method rather than from a zip file sitting on the SD card. This all seemed to work just fine.
Next I went ahead and flashed OpenGapps Mini. This resulted in an error 70 and after reading about it, it was a simple matter of going into the advanced settings in TWRP and extending the system partition. Did that and OpenGapps then flashed with no problem.
Finally I wrapped it up by flashing tegra124-tn8-p1761-1270-a04-e-battery.dtb and rebooted.
... Nothing. Now I know that when flashing a new rom, the first boot can take some time, but I let it sit for about 2 hours with no result. It didn't appear to be boot looping, but instead just stuck on the nVidia boot screen. Forced it to boot back to the bootloader and brought up TWRP. I obviously did something wrong, so I prepared to reflash the stock image.
Did the wipe, flashed the files and rebooted. Again, nothing.
This time however, not only can I not boot to the system, I now also can't get back into recovery.
No matter how many times I reboot, or attempt to reflash anything, it hangs on the boot screen when attempting to get back into recovery.
So I'm stuck. I've tried reflashing TWRP, stock recovery and stock system, with the SD card in and out, a number of times, all with no joy.
I can access the bootloader, so I can at least run fastboot commands, but that's all I can do. Without being in recovery, I can't access an ADB shell if I need to repair anything.
If you're still with me after this rambling mess, do I have any hope at all in recovering this thing?
Click to expand...
Click to collapse
I'm also sort of in the same boat i had a custom rom installed and decided to go back to stock os and now i'm stuck at either the Nvidia Logo or the Fastboot menu there's nothing else it let's me do i'd take any advice at this point. I can use Fastboot commands and I've tried Flashing Twrp.img and also flashing all the stock os which goes through with no problems i reboot the device and it's just stuck at the Nvidia logo
Ps: how did you manage to get back into recovery
Hello.
I think i had the same Problem.
I Flashed a Custom Rom, MiniGapps and the tegra...Battery file and since then i had boot loop an the NVidia Logo.
The Problem was: i flashed the tegra-Battery.ZIP file!!!
I noticed that i have to unzip it and flash teh tegra-..battery.DTP file.
since then it booted up again.
the OpenGappMini was buggy. it worked with the Nano!
Hope this helps for you as well!
OMG you guys. I did the exact same damn thing. Flashed the ZIP instead of the DTP file. 100 million thanks to you. I'm going to give it a shot now.
It worked! I wonder how many other folks didn't realize it wasn't a zip to flash to dtb and bricked their devices.