To begin, i had been on the same Hyperdrive Rom for several months before my phone died over night and when i turned it on i was able to receive text messages and send texts for several minutes before i experienced delivery failed on every text message. I tried to make a phone call, but it would constantly "dial" but never ring. When trying to call my cell number from a different phone, it would go straight to voicemail. Currently, i can receive texts but not send them and i can not call or receive calls. Also, i can use 4g and WIFI just fine. The only issues are calling and sending texts.
I searched the forums and google for a solution and discovered that my IMIE was 0 and my ERI said "None". Using QPST i was able to manually input my IMIE back into my phone so it now reads correctly as the number that is listed behind my battery but the ERI still says "None" and i am having the same issues, nothing was fixed.
I continued to search for alternative solutions and came across a "Reprovision" trick but i could not find a stock rom old enough that was compatible with the *2767*3855# trick. Apparently, it has to be VRALF2, VRLG1 or VRLG7 and the links i have found here are all to hotfile.com which is shut down.
I came across a "Samsung MEID Repair Tool" that had apparently been on these forums but was removed, i followed the instructions (i would post link but i have not made enough posts to list outside links) but I could not get that repair tool to work because the radio of the oldest ROM i flashed was too updated.
The oldest Stock ROM i was able to download through ODIN successfully was:
Android Version: 4.1.1.
Baseband Version: 1535VRBLK3
My phone status looks like this:
Network: Verizon Wireless
Service State: In Service
Roaming: Not Roaming
Mobile Network State: Disconnected
ERI Version: None
IMEI: (Correctly showing the same number as the number behind the battery)
IMEISV: 00
Can anyone direct me to a link to a stock VRALF2 VRLG1 or VRLG7 Odin ROM so i can attempt the reprovision trick or get the Repair Tool to work or suggest steps for me to take to get my phone working again?
Thank you for any and all help.
b61994 said:
Can anyone direct me to a link to a stock VRALF2 VRLG1 or VRLG7 Odin ROM so i can attempt the reprovision trick or get the Repair Tool to work or suggest steps for me to take to get my phone working again?
Thank you for any and all help.
Click to expand...
Click to collapse
Here is the F2 rom:
http://www.shipped-roms.com/downloa...ZWALF2_618049_REV09_user_low_ship.tar.md5.zip
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
My data worked this way
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Pujan Shrestha said:
I think your problem is the region is not set Nepal...I installed dark jb rom in my phone and data was gone since then. Then I manually downloaded stock firmware and flashed through odin but still data wasnt working,nd while in recovery mode i saw region INS ie India. then something came in my mind and.. .I changed it to NPL and now i can use data in only sim 1 only not in both sims. So i also may need some help.
For you *#272*IMEI# . Use your phones IMEI number there (*#06#) . Select NPL region.
NOTE: It will hard format your phone installing required carrier apps, aps, bla bla and hope work on your phone
Click to expand...
Click to collapse
I found that the hidden menu (& hence secret code dialing) was disabled in my phone. Following guides from Google search I enabled it. Now codes likes "*#06#",*#1111#", "*#0228#" etc are working, but "*#272*IMEI#" is not working. Any idea, why it is not working?
kkafle said:
I have a Samsung Galaxy S3 SCH-I535 CDMA Verizon & GSM phone. Originally it was on android 4.1.2 and working fine for both CDMA and GSM (one at a time). CDMA EVDO Rev A data service was working fine.
I am using this phone in Nepal (not in USA). It was carrier unlocked for both CDMA & GSM when I purchased from Amazon. (so, I guess, Originally it may had some customized firmware/ROM for International use, I don’t have much idea).
I was asked for firmware upgrade every time when I run Samsung Kies. One day I clicked to upgrade the firmware. The upgrade was over successfully. But the new android version I found on my phone was 4.4.2.
In this version /new upgrade, I was unable to use CDMA data (EVDO-rev A). So I wanted to reverse back to old version. I search the process in Google and tried to load firmware with the help of Odin3 using this file:- “I535VRBMF1_I535VZWBMF1_VZW.zip”, but it was not successful. Result: Fail(Auth)
Then I loaded firmware for 4.4.2 using Odin3.09 (AP: “I535VRUDNE1_I535VZWDNE1_I535VRUDNE1_HOME.tar.md5”) and now the phone is working.
• If I use GSM SIM I can make call and use HSPA data service as well by adding new APN.
• If I use CDMA RUIM I can make call, BUT DATA SEVRICE using CDMA EVDO Rev A is NOT WORKING!! (I can not save APN in this case).
Now my issue is how to make CDMA EVDO data service working in my phone, because my basic requirement is to use this phone for CDMA service (voice + data).
I can edit the APN but when I click “Save”, nothing was saved. So I can not select APN for my carrier. I tried using APN Manager Pro too, here I can enter & enable the APN, but did not work. The phone is not able to dial the data access code #777 (verified from CDMA service provider side trace).
Can someone help me what I should do to make my phone working for CDMA data. My phone is rooted.
I guess it may work for CDMA data if I downgrade it to 4.3 or 4.1.2,
Can I do that. If so what are the procedures / steps. Any help in this regard would be highly appreciable.
Click to expand...
Click to collapse
Well, it looks to me as though you've locked your bootloader and are now stuck on 4.4.2. For some reason, Verizon forces Samsung to lock their bootloaders, which means we (the consumers) cannot install "custom" firmware on our devices (or downgrade).
Once you're on 4.4.2 NE1 your stuck with it. No downgrade possible at least not without a Jtag service
Sent from my SCH-I535 using Xparent ICS Tapatalk 2
I have faced similar problem I can't create apn I am using it in India . So my data i not working on any sim card but i can make and receive calls . My android version is also 4.3 . So please help me i want to use both hspa and evdo .
Sent from my iPhone using Tapatalk
OOOKAAAYY.....after many months of flashing and downloading files. I managed to get AT&T firmware, and modem onto my SPRINT SPH-L720T. I believe it happened after I got rid of anything carrier based, and flashed a google based rom, and then flashed AT&T firmware, CSC file, Modem, and Kernel. Heres the catch...when I did this I lost root and went back to stock recovery. It takes a while to boot, but the at&t firmware loads even with all the AT&T bloat apps, However my baseband is still stuck on L720TVPUBNC6 which is the baseband for sprint galaxy s4. Originally I upgraded it when it still had sprint firmware all the way to android 4.4, but after all the flashing to KK Rom, Cynanongenmod, liquidsmooth etc until the present I cannot change the baseband even when I flash with odin or from recovery mode on the sd card. Do I need to reacquire root , and a custom recovery to do this? Ive spent so many days, and hours doing this, and im finally on the edge of converting this phone completely to AT&T from sprint. My wifi also does not work which I believe is related to to mismatched baseband. Can anyone help?
elight7286 said:
OOOKAAAYY.....after many months of flashing and downloading files. I managed to get AT&T firmware, and modem onto my SPRINT SPH-L720T. I believe it happened after I got rid of anything carrier based, and flashed a google based rom, and then flashed AT&T firmware, CSC file, Modem, and Kernel. Heres the catch...when I did this I lost root and went back to stock recovery. It takes a while to boot, but the at&t firmware loads even with all the AT&T bloat apps, However my baseband is still stuck on L720TVPUBNC6 which is the baseband for sprint galaxy s4. Originally I upgraded it when it still had sprint firmware all the way to android 4.4, but after all the flashing to KK Rom, Cynanongenmod, liquidsmooth etc until the present I cannot change the baseband even when I flash with odin or from recovery mode on the sd card. Do I need to reacquire root , and a custom recovery to do this? Ive spent so many days, and hours doing this, and im finally on the edge of converting this phone completely to AT&T from sprint. My wifi also does not work which I believe is related to to mismatched baseband. Can anyone help?
Click to expand...
Click to collapse
Which recovery would I need now sprint file or at&t?
Android 4.2.2
samsung SGH-I337/SPH-L720T
baseband: l720tvpubnc6
kernel: 3.4.0 812098
[email protected]#1
SELinux status: permissive
build number: JDQ39.I337UCUAMF3
secure boot status: type: samsung
Hi,
I'd suggest you ask for help in this thread dedicated to your model,
Sprint Samsung Galaxy S 4 > Sprint Samsung Galaxy S 4 Q&A, Help & Troubleshooting > [q] ALL THINGS GALAXY S4 (GS4) MODEL SPH-L720T
Good luck!
Thank you. Thread closed.
I just unboxed my G955FD and put my cricket SIM in and have no response from the network other than pushing an APN and my phone number. I tried manually selecting carrier networks and it listed 5 different "cricket" to attempt to connect to. At one point it showed signal bars in the status area, but no network connectivity. When I automatically connect to the network it responds saying I am registered but no signal bars in status and no activity. I appreciate the help.
Can anyone offer some tips before I call it a lost cause? The phone is out of its return period and probably broken since it will now receive a cricket badge and bars and LTE service but will not make calls or go online
Hey, are you on stock ROM. My 955F works just fine on Cricket, though compared to my daughters AT&T setup, her data is much faster. just discovered this today, and tomorrow will visit Cricket and AT&T to find out why...
Jan 9, 2108 update. I discovered Cricket is limited to about 5-6 Mps. I'm now on AT&T, for a few dollars more for two lines, and can get up to about 40-60 Mps in town.
What region CSC are you using?
---------- Post added at 07:59 AM ---------- Previous post was at 07:35 AM ----------
Here are my apn settings
Name: any but I input Internet or Cricket, I think it will work with whatever you like.
APN: ndo
MMSC: http://mmsc.aiowireless.net
MMSC proxy: proxy.aiowireless.net
multimedia message port: 80
mcc: 310
mnc: 150
apn type: default,mms,fota,hipri,supl
I know when I've setup APs on other phones there have been times that I will first do a 'reset' of my network settings on the phone, then reboot. Sometimes that will help. After that I will enter new APN settings and reboot.
On this 955F, with a viable CSC my phone just finds Cricket and works. With a bad CSC, it may list/show the cricket or AT&T networks, and will not register, no matter what I do, and for how long.
For example, my phone initially had a stock F ROM and a Panama region for the CSC. It worked with Cricket straight away. I changed the CSC to XAA using AT&T, and would find the towers, but would absolutely not register/work.
I ended up installing CarHDROM - a Note 8 OS ported for the 8+, and It took me a bit to find a CSC package that was meant for the ROM (Note 8) I was using, meaning I had to use a Note 8 CSC, even though my phone was an 8+ 955. Once that installed, Cricket started right away.
The CSC that came with CarHDROM I don't think worked straight out, but I can't recall for sure. I did end up using a XAA CSC, for the Note 8, non-AT&Tand that solved my connection issue after I had installed the CarHDROM.
CSC and phone wise, the ROM takes precedent, and the CSC must match the ROM (model). Seems that way to me, anyway.
Hope his helps.
There is another post about a FD phone that won't connect up, as well.
https://forum.xda-developers.com/galaxy-s8+/help/original-firmware-t3725472
I am on stock ROM. I guess I will root today and change CSC and hopefully that fixes whatever issue is going on. I have seen the cricket badge and LTE bars recently but no registration on network. If not, the eBay seller said they will take the phone back I'd it's indeed broken.
Ok so far no luck changing the CSC on stock ROM. I am going to try a couple different ROM and CSC combos tonight. Once again I am showing bars and cricket badge but not connecting data or voice on the phone, after root, and changing CSCs. I feel like Im so close and passed up my last day to return to eBay seller so I hope it truly is software and not hardware related. Im thinking of going by AT&T to act like a potential customer and see if its cricket messing up. Any other suggestions to try before I go crazy and use this phone for target practice?
Is it possible this is a region lock issue? My phone is a Tawain version and it was brand new out of the box. There is no sticker on it mentioning region lock. Does anyone have any insight into region locking for outside EU devices?
ChikhaiBardo said:
Is it possible this is a region lock issue? My phone is a Tawain version and it was brand new out of the box. There is no sticker on it mentioning region lock. Does anyone have any insight into region locking for outside EU devices?
Click to expand...
Click to collapse
Good question. I have a 930S Chinese region and it pulled in ATT/Cricket/TMobile just fine. I did have problems when I flashed a custom ROM, and flashed the CSC that came with the ROM. Later I flashed back the OEM CSC for the region (China) and it worked perfectly, again.
If you do flash a custom ROM, make sure you get a CSC package that is meant for that ROM (model). Not the exact model of your original phone. If you can find an XAA CSC that is meant for the new ROM, should be perfect.
JeffDC said:
Good question. I have a 930S Chinese region and it pulled in ATT/Cricket/TMobile just fine. I did have problems when I flashed a custom ROM, and flashed the CSC that came with the ROM. Later I flashed back the OEM CSC for the region (China) and it worked perfectly, again.
If you do flash a custom ROM, make sure you get a CSC package that is meant for that ROM (model). Not the exact model of your original phone. If you can find an XAA CSC that is meant for the new ROM, should be perfect.
Click to expand...
Click to collapse
Ok I have been changing CSC through TWRP with the CSCSelection Utility. Is that what you are referring to with flashing CSC? Is there a more effective way to do this through Odin? I think tomorrow morning I am going to flash back to stock firmware and start over. Am I able to flash any stock firmware for the SM-G955FD through Odin or do I need the original firmware for my region, which is (BRI) I believe I remembered reading I can flash everything for that model, but not any North American firmware meant for the SM-g955U
ChikhaiBardo said:
Ok I have been changing CSC through TWRP with the CSCSelection Utility. Is that what you are referring to with flashing CSC?
Yes
Is there a more effective way to do this through Odin? I think tomorrow morning I am going to flash back to stock firmware and start over. Am I able to flash any stock firmware for the SM-G955FD through Odin or do I need the original firmware for my region, which is (BRI) I believe I remembered reading I can flash everything for that model, but not any North American firmware meant for the SM-g955U
Click to expand...
Click to collapse
Just flash the CSC that comes 'stock'/with the rest of the full, stock firmware set, Odin will work. Have the SIM in the phone before you reboot, as for me it seems to help.
I haven't found a difference, for me yet, just flashing the exact CSC through Odin or TWRP. As I'm now on a custom ROM, I'm usually flashing via TWRP with a CSC that is supplied by an Aroma setup. Aroma is very handy.
Yes, flash your full stock via Odin. If you have TWRP you will lose it. You can re-flash TWRP from Odin. I typically flash TWRP all by itself, but I don't think that is really necessary. Maybe someone will come along and let us know.
As an aside I always keep a copy of zips/installs of TWRP, re-verity and SU on my SD card.
So after the stock full flash, I reboot into download mode and Odin flash TWRP, and follow that by a direct 3 key reboot into recovery, and TWRP will load. If you are going to root then flash re-verity, then SU/Magisk. You could then flash your CSC, but with the issues you've been having, I'd then boot to system, do the initial setup of the phone, and then boot back to recovery/TWRP, backup the phone.
Then TWRP flash the CSC Aroma package, making sure you have the SIM in the phone and reboot to system. I've been using XAA as my CSC with my custom ROM, within that is AT&T, T-Mobile, etc for US phones. I select the main XAA CSC from Aroma. Next I select the unbranded XAA as my more specific/local package, instead of AT&T, for example.
My 955F, stock worked just fine on it's 'stock' CSC (China region). I only had to change the CSC when I flashed a custom ROM, and that ROM did not have the ROM's (model) of XAA, so I had to find a CSC, which had XAA, that 'matched' the ROM I had flashed. I had flashed a Note 8 ROM, CarHDROM,v8 initially. Again, that ROM was largely meant for Europe and Exynos phones, so I had to be pointed to a Note 8 CSC that was compatible with the Note 8 custom ROM.
Yes, Odin is where you would flash stock firmware/stock CSC (not in an Aroma package) for your SM-G955FD. It is my understanding that all non-US phones, eg the G955's, are mechanically the same, so flashing 'any' Exynos ROM, G955FD ROM should work via Odin. You can also flash CSC packages via Odin as well, but there is no Aroma process, to my knowledge/experience. So have the specific and correct CSC to flash via Odin, if you go that route. It sounds like you are aware your phone is Exynos? A non-US phone?
I specifically bought my G955 (8+) as non-US so it could take root smoothly/easily, and work great world wide, including working great here in the US. Sometimes the U.S. does not seem a part of the world.
As I've been messing about with S7's/8s, there have been times that the phone did not grab onto AT&T, for example, and i would then 'reset' the network and reboot, with the SIM in the phone, then do a search for phone networks/services. That usually solved it, but when it did not, and I know I have the right CSC, I would then input/create a new APN, with AT&T, Cricket, Sprint, or what-ever service I needed, then reboot.
The only times I've not gotten the phone/s to grab the networks after that is when I've had the incorrect CSC.
Again, on my stock what-ever country G955F, stock G930S, etc, all Exynos, with the same stock (non-US) CSC that come in the firmware package, the phones have grabbed AT&T/T-Mobile just fine. If it would not, I would have reset the network, rebooted and entered the APN, and then rebooted (with the SIM in the phone). Done a network search after that, if necessary.
Hope this helps.
So today I stopped by TMOBILE and the store clerk popped a SIM card in and it fired up 4G LTE immediately and made calls. I then decided to stop by AT&T and it showed bars but refused to register or do anything even with the APN settings being pushed through from AT&T and Cricket. I am finally happy to realize that my phone is not defective (which I had feared before) and that it must be this service area and the bands on the G955FD. I have wanted to switch to TMOBILE for awhile now anyway so this is my chance to have an excuse to do it. Any input on why it won't access AT&T through an AT&T or Cricket SIM? I'm curious now more than anything. It must be missing a band that this area uses correct? The phone is clearly unlocked and functioning correctly.
What local CSC r u using?
Did you have AT&T check the APN?
T-Mobile and AT&T work on S8+ just fine, but need appropriate APNs.
Head back to the AT&T, if you want AT&T, and see if they will reset and or reinstall AT&T CSC/OS on your phone. XAA/ATT will have the AT&T boot logo. XAA/XAA (generic US use, ATT/T-Mobile compatible) will not.
One ringy dingy, two ringy dingy's...