Related
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
So the wait is over now. Finally, CM12 has been released for V400 a.k.a LG G Pad 7.0 Wifi. Thanks to @invisiblek and @timmytim, without them, V400 will never taste Lollipop .
Make sure you follow the instruction below or your device goes bricked.
BUGS:
Slow boot animation, wait 2-3 mins after booting because it's laggy when it just finishes booting.
Screen keeps waking itself, turn off "Lift to wake" in Settings ==> Display and lights
WORKS:
Wifi
Bluetooth
Rotation
Camera
GPS
Audio
MTP
Partial USB OTG
External SD Card
Double tap 2 wake
H/W decoder
Camcorder
Offline charging
Magnetic case
...
Doesn't work:
SElinux (Now permissive)
Instructions:
1 .Download ROM and save to sdcard
2. Boot into TWRP
3. Perform a full backup
4. Factory reset, wipe cache and system
5. Flash ROM, Flash GAPPS (Optional)
6. Reboot
7. Enjoy! (Optional)
Download:
Build 03192015 with fixes: [GOOGLE DRIVE], [ANDROID FILE HOST]
Build 03192015: [GOOGLE DRIVE]
Build 03182015: [GOOGLE DRIVE]
Build 03172015: [GOOGLE DRIVE]
Build 03162015: [GOOGLE DRIVE]
*********************
GAPPS: [ITVENDS]
Credits goes to:
@invisiblek, @timmytim. Without them, this project will not come true
@gaytony for his endless help.
You for using it.
*********************
If you think this help you, please consider buying @invisiblek a beer. Click here. Or donate to me if you are very kind (J/K).
All questions, please go to Q&A thread.
XDA:DevDB Information
UNOFFICIAL Cyanogenmod 12 for LG V400 a.k.a G Pad 7.0 Wifi, ROM for the LG G Pad 10.1
Contributors
bangprovn, invisiblek, timmytim
Source Code: http://github.com/bangprovn, http://github.com/invisiblek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Version Information
Status: Beta
Current Beta Version: 2.5
Beta Release Date: 2015-03-16
Created 2015-03-16
Last Updated 2015-03-22
**CHANGELOGS:
Build 03192015 - Ver 2:
HW Player fixed
Move app to SD fixed
Increase volume for speaker and headset
Build 03192015:
Offline charging fixed
Omitted Linux logo when booting
Sensors fixed
Support for magnetic case
Improvements
Latest source
Build 03182015:
Improvements in battery and performance
Enable ZRAM
Adjust minfree value for lowmemkiller
Using interactive governor insted of performance one: Better bettery life
Removed 1080p for back-cam recorder (doesn't work)
Latest source
Build 03172015:
Fix H/W Decoder: Playing Youtube, Video recorder...
Enable KSM: Improvements in performance
Added Power profile for better handling CPU demands
Change device characteristic to tablet
Reverted back to v410 media profiles
Latest source
Screenshots
Screenshots:
You da man! already using it, smooth like butter
Is this 400 only or does it include 410?
neo4uo said:
Is this 400 only or does it include 410?
Click to expand...
Click to collapse
Only v400
gayTony said:
Only v400
Click to expand...
Click to collapse
Thanks for letting me/us know
neo4uo said:
Is this 400 only or does it include 410?
Click to expand...
Click to collapse
Invisiblek and Tommytim will take care the v410, stay tuned !
bangprovn said:
Invisiblek and Tommytim will take care the v410, stay tuned !
Click to expand...
Click to collapse
Posting it up shortly
bangprovn said:
Invisiblek and Tommytim will take care the v410, stay tuned !
Click to expand...
Click to collapse
Youtube is not working in app, in the browser it works
goood work !!!!!!!!!!!!!!!!!!
link gApps don't work for me
thanks a lot broooo
braulio_holtz said:
link gApps don't work for me
Click to expand...
Click to collapse
Search it in google, Gapps link is provided by CyanogenMod itself...
Thanks for all
bangprovn said:
Search it in google, Gapps link is provided by CyanogenMod itself...
Click to expand...
Click to collapse
Thanks. Link gApps http://forum.xda-developers.com/par...apps-official-to-date-pa-google-apps-t2943900
thanks for this...one question:
the list you posted "does not work", are these not a biggie nor big showstopper? they are like I can live without it until resolved kinda issues?
jazzespresso said:
thanks for this...one question:
the list you posted "does not work", are these not a biggie nor big showstopper? they are like I can live without it until resolved kinda issues?
Click to expand...
Click to collapse
Enough for daily drivers, you can live with it
And this is that moment when you realize you bought the wrong variant! Damn you v400 owners! I am jelly.
Is youtube 720p working for you guys? mine only works at 360p
AOSPA Extended
#Be Extended
Code:
/*
* Your warranty is now void?
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This ROM was created specifically with my kind of people in mind. When I used AOSP Extended,
I fell in love with it's balance of quantity and quality, neither it was crammed like RR and nor was it super stock like AOSPA. So I decided to take AOSPA as a base and make it's EXTENDED version with all the cherry-picked features that I would have loved to have in AOSPA in the first place. This is the outcome. There are still a couple of features left out. But everything else is working as expected.
It has got all the features that official AOSPA has but now more and better. Here is the list::
- Inbuilt screen stabilizer(accessible from QS tiles)
- XOSP blur personilazations + Full notification Blur + Lockscreen blur
- In-call vibration options
- Statusbar clock and date customizations
- Statusbar network traffic
- Recents UI FAB addition
- Recents UI memory display bar
- Battery Bar
- Alert Slider customisations(fully customizable)
- Improved pocket lock
- Unlink notification volume
- Variable Lockscreen pattern size
- Safe headset volume toggle
- Fixed battery qs tile not getting themed properly on white themes
- Add signature spoofing
- Add toggle for DoNotDisturb in-call
- Update to latest oneplus display callibration.
- Added "kill app" option in list in buttons settings. Can be mapped to any button. (screenshot)
- Reverted back to the old boot animation as I personally like it.
- Added modded GCam app with HDR+, 120fps Slow-mo working, 60fps 1080p working, and far superior quality in low light (here v1.5)
Custom kernel included:-
- Full sound control
- Boeffla Wakelock control
- More to explore
Download Link::
Get the latest build here.
Useful Links::
OpenGApps (pico recommended)
Magisk SU(You can use any SU package you want)
Install Instructions::
1. Flash AOSPA Extended zip
2. Flash Gapps zip
3. Flash root package of your choice (optional)**
4. Reboot System
NOTE1: This ROM is not pre-rooted.
NOTE3: This ROM has all the features official AOSPA has(some tweaked a little), and also their Custom Camera HAL.
XDA:DevDB Information
AOSPA EXTENDED-7.4.0-ONEPLUS 3/3T, ROM for the OnePlus 3
Contributors
rituj26
Source Code: https://github.com/brituj
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Firmware included
Based On: AOSP, CAF
Version Information
Status: Stable
Current Stable Version: 7.4.0-Extended
Stable Release Date: 2017-12-03
Created 2017-08-13
Last Updated 2017-12-03
Info on screen stabilizer and screenshots
Have you tried to read a book or an article like this while on a bus or walking down the street? I bet you tried! In this case you should notice that reading text in a such way is not a good idea since the screen constantly shakes. It seems that screen shaking is a big enough issue and eliminating it can promise a good UX. This application uses the device accelerometer sensors to compensate for and smooth out screen content shaking in the same way as DSLR camera stabilizes its sensors/lenses
Parameter Details:
1] Velocity Friction : It is used to adjust the friction of the movement of the screen when walking. If the value is greater, the screen translation will be slower.
2] Position Friction : It is used to adjust the speed at which the screen tries to adjust to the normal position.If the value is greater, it takes more time to adjust to normal position
3] Velocity Amplification : It is used to amplify the calculated velocity and use it to translate the screen
Reserved
Reserved
Nice work, going to give it a try .
What different of your build and official Aospa Extended?
It was hightime you got into the game..!! Good luck bro.. With the rom and college as well..
MarcusYang said:
What different of your build and official Aospa Extended?
Click to expand...
Click to collapse
Didn't bother to read the OP..
Thanks for you work OP will give it a blast :good:
Downloading. Is it that some kind of theme or the default view is like that in this rom? from the ss.
Any battery or performance improvement over asopa???
mady51 said:
Downloading. Is it that some kind of theme or the default view is like that in this rom? from the ss.
Click to expand...
Click to collapse
Belo theme by De Jan.
liam_davenport said:
Didn't bother to read the OP..
Thanks for you work OP will give it a blast :good:
Click to expand...
Click to collapse
OK ....
Quick update - i get fc when i try to open settings -ux option. Rest is fine. Sry had to revert back
If anyone, who is testing this Rom on OnePlus 3, please leave a feedback here, if it has the same random reboot or random shutdown issues like original AOSPA. Thanks in advance ?
mady51 said:
Quick update - i get fc when i try to open settings -ux option. Rest is fine. Sry had to revert back
Click to expand...
Click to collapse
Could you please add a logcat, coz everything is fine over here
rituj26 said:
Could you please add a logcat, coz everything is fine over here
Click to expand...
Click to collapse
Sry bro. As i said i restored my backup. I will try it again tomorrow and post u logs.
Sorry guys. Had to take down the build as it was and old version with the same date. So had a bug where you couldn't open the customizations page.
New build will be up shortly.
Sorry for any inconvenience caused.
rituj26 said:
Sorry guys. Had to take down the build as it was and old version with the same date. So had a bug where you couldn't open the customizations page.
New build will be up shortly.
Sorry for any inconvenience caused.
Click to expand...
Click to collapse
U noob..!!
Just kidding.. Quick pls.. Lol.. Haven't flashed since a long time..!
New build UP!!
arjunarora said:
U noob..!!
Just kidding.. Quick pls.. Lol.. Haven't flashed since a long time..!
Click to expand...
Click to collapse
Heard you bro.
New build is up.
https://www.androidfilehost.com/?fid=889764386195922749
rituj26 said:
Heard you bro.
New build is up.
https://www.androidfilehost.com/?fid=889764386195922749
Click to expand...
Click to collapse
What r u man? Like jarvis? U r super fast. Downloading again
rob rich said:
If anyone, who is testing this Rom on OnePlus 3, please leave a feedback here, if it has the same random reboot or random shutdown issues like original AOSPA. Thanks in advance
Click to expand...
Click to collapse
See, this ROM's base is AOSPA, so itinherits all the AOSPA bugs as well unless I have fixed them separately. As for the random reboot, haven't gotten any for about 3 days. I shifted from f2fs to ext4.
crDroid for Nexus 7 (2012) [grouper]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. crDroid is based on LineageOS so use custom kernels compatible with it!
Features
LineageOS - all mods and features
StatusBar: Network Traffic
StatusBar: SU icon toggle
StatusBar: Ticker
StatusBar: Hide/Show icons
StatusBar: BatteryBar customization
StatusBar: Battery styles
StatusBar: Tap to Sleep
StatusBar: Clock styles
StatusBar: crDroid logo customization
QuickSettings: Tiles customization
QuickSettings: Brightness slider toggle
QuickSettings: Optional brightness icon
QuickSettings: Vibrate on Touch
QuickSettings: WiFi easy toggle
QuickSettings: Bluetooth easy toggle
QuickSettings: Data easy toggle
Navigation: Toggle navbar
Navigation: PIE navigation
Navigation: DUI - SmartBar / Fling Toggle
Navigation: Pulse - smart visualization
Notifications: Power notification controls
Notifications: Force expanded notifications
Notifications: Toggle immersive mode messages
LockScreen: Screen shortcuts
LockScreen: Toggle longpress for screen shortcuts
LockScreen: Swipe shortcuts
LockScreen: Toggle media cover art
LockScreen: Toggle clock
LockScreen: Toggle date
LockScreen: Toggle alarm
LockScreen: Tap to sleep
LockScreen: Toggle longpress torch
LockScreen: Customize number of notifications
LockScreen: Toggle power menu for secure lockscreen
Recents: Immersive Recents
Recents: Hidden apps
Recents: Toggle OmniSwitch or SlimRecents as default Recents
Sound: Toggle screenshot sound
Sound: Live customization for number of volume steps
Sound: Less frequent notification sounds
Miscellaneous: Clock Widget
Miscellaneous: Toggle suggestions on Settings dashboard
Miscellaneous: Toggle summaries in Settings
Miscellaneous: Toggle auto-start music player on headset detection
Settings/Display: Expanded Desktop customization
Settings/Sound: Increasing Ringtone
12 New Quick Settings Tiles including Caffeine mode, Expanded Desktop and Sync.
Settings/Security: Quick PIN/Password Unlock
Default sounds from latest Nexus image.
OMS support.
Stability and performance improvements.
Always have a full functional Backup just in case!
Download Link to Rom
Build 2018-06-18 (7.1.2_r8) - AndroidFileHost - June 2018 Google Security Updates
Build 2018-04-20 (7.1.2_r7) - AndroidFileHost - April 2018 Google Security Updates
Build 2018-04-06 (7.1.2_r6) - AndroidFileHost - March 2018 Google Security Updates
Build 2018-01-19 (7.1.2_r4) - MEGA - Google Drive - AndroidFileHost - January 2018 Google Security Updates
Build 2017-12-12 (7.1.2_r3) - MEGA - Google Drive - AndroidFileHost - December 2017 Google Security Updates
Build 2017-12-10 (7.1.2_r2) - MEGA - Google Drive - AndroidFileHost
Build 2017-11-26 (7.1.2_r1) - MEGA - Google Drive - AndroidFileHost - November 2017 Google Security Updates
Download Link to Rom with DT2W
Build 2018-06-18 (7.1.2_r8_DT2W) - AndroidFileHost - June 2018 Google Security Updates & ("Experimental" DT2W)
Build 2018-04-20 (7.1.2_r7_DT2W) - AndroidFileHost - April 2018 Google Security Updates & ("Experimental" DT2W)
Build 2018-04-05 (7.1.2_r6_DT2W) - AndroidFileHost - March 2018 Google Security Updates & ("Experimental" DT2W)
Build 2018-03-11 (7.1.2_r5_DT2W) - AndroidFileHost - February 2018 Google Security Updates & ("Experimental" DT2W - see post for details)
Download Link to Open Gapps
opengapps (choose ARM>7.1>Pico)
Download Link to Open Gapps System Size Fix
gapps-config-grouper.txt - MEGA - Google Drive - AndroidFileHost
Download Link to Initial Setup Wizard Fix
If the initial Setup Wizard crashes, use JT1510365's Setup Wizard Fix - Google Drive.
@JT1510365 wrote about this issue in Post #58.
If you continue experiencing issues even after applying this fix, refer to the Possible Bugs paragraph below for walkarounds.
First time installation of crDroid to your Nexus 7 (2012), or new ROM instructions:
- Make sure you're running a proper working Recovery (TWRP or CWM)
- Boot into Recovery by holding Down Vol- button and Power button
- Wipe System, Data and Cache partitions (Wiping Internal Storage is recommended, but you will lose any files, bookmarks, etc.!)
- If you want (recommended), you can format ONLY Data and Cache partitions to F2FS. System partition must be EXT4! (Once again, you will lose your data!) (If you use EXT4, you can run fstrim to maintain ROM.)
- Copy crDroid ZIP and openGApps ZIP and gapps-config-grouper.txt to your external SDCard or Internal Storage
- Flash crDroid ZIP
- Flash openGApps ZIP
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Wait around ~ 10 minutes ~ for first boot
Upgrading from earlier version of crDroid:
- Copy crDroid ZIP to your external SDCard or Internal Storage
- Boot into Recovery by holding Down Vol- button and Power button
- Wipe System and Cache partitions
- Flash crDroid ZIP
- Flash openGApps ZIP
- Reboot
- Wait around ~ 10 minutes ~ for first boot
Possible Bugs:
- Initial Setup screen might crash with "Setup Wizard has stopped" depending on Open Gapps or Lineage OS version. DO A DATA WIPE / FACTORY RESET step should help. Otherwise, you can skip the initial Setup screen by tapping on 4 edge points on screen starting from upper left corner clockwise. You can also "fix" this by enabling WiFi from notification bar as seen in this YouTube video.
- crDroid 7.1.2 is mostly stable, but depending on different builds and configurations, you may experience System UI crashes. A simple Reboot usually helps in this case. Rooting Grouper with SuperSU and uninstalling some unnecessary System Apps to make System partition have more space may also help.
Credits:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- @firebird11
- @Cristiano Matos
- @davidteri91
- @hokiealumnus - This thread format & content.
- @neobuddy89 - crDroid Developer & Maintainer.
- @wilmsn - Build instructions & Github.
- @aaopt - Build instructions & Github.
- @AndDiSa - AOSP 7.1 & Device tree & Kernel.
- @GtrCraft - CM13 tree that Aaopt used.
- Many others... (if you're feeling upset being out of the Credits list just send a PM)
crDroid DONATE
crDroid G+ community
https://github.com/crdroidandroid
XDAevDB Information
crdroid, ROM for Nexus 7 (2012)
Contributors
firebird11, cristiano matos, davidteri91
Source Code: https://github.com/crdroidandroid
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.10.x
Based On: LOS
XDAevDB Information
[ROM] [grouper] [7.1.2] [LOS-based] **crDroid**v3.8.8 for Nexus 7 2012
Contributors
AICProcks!, wilmsn, aaopt
Source Code: https://github.com/crdroidandroid
ROM OS Version: 7.1.2 Nougat
Based On: LineageOS
Version Information
Status: Testing
Created 2017-11-26
Last Updated 2018-06-18
Building from Source
Here are the instructions to build from source:
Make sure that your LINUX based computer is setup for developing Android roms; you can read how here.
Make a new directory called WORKSPACE as follows:
Code:
mkdir WORKSPACE
cd WORKSPACE
Install Repo in the created directory WORKSPACE
Code:
repo init -u https://github.com/crdroidandroid/android -b 7.1
Add the following roomservice.xml file in .repo/local_manifests within the WORKSPACE directory.
Code:
git clone https://github.com/AICProcks/crDroid_local_manifests.git .repo/local_manifests -b 7.1
Add the following code to your ".bashrc" as follows:
Code:
export JACK_SERVER_VM_ARGUMENTS="-Dfile.encoding=UTF-8 -XX:+TieredCompilation -Xmx4g"
Then use the following code:
Code:
repo sync --force-sync
. build/envsetup.sh
make clobber
brunch grouper
****! you built it before i did!!!!
EDIT: Nice use of MEGA though, that is honestly my favorite file hosting site
files don't expire for a very long time
you only have to log in once a year to keep everything
its fast and stable
Good on you dev. :good:
its running really fast so far, been running it all day. I don't want to jinx it, and I hope I can keep this performance for more than a few days (only having to fstrim once a week would be nice). I'm surprised that crdroid runs better than slim 7 on the grouper.
Galaxyninja66 said:
its running really fast so far, been running it all day. I don't want to jinx it, and I hope I can keep this performance for more than a few days (only having to fstrim once a week would be nice). I'm surprised that crdroid runs better than slim 7 on the grouper.
Click to expand...
Click to collapse
Thanks for trying crDroid out. Yes, so far crDroid runs stable for me. The battery life is amazing in Doze mode. I got the idea of building crDroid for Grouper because I have it on my phone as well and its rock solid.
I was wondering if people would like to use Mega as a file host. I tried using Android File Host, but there were some issues and I couldn't open an account. If anyone objects to using Mega, please let me know. I will make an additional upload on Drive or another file host.
AICProcks! said:
Thanks for trying crDroid out. Yes, so far crDroid runs stable for me. The battery life is amazing in Doze mode. I got the idea of building crDroid for Grouper because I have it on my phone as well and its rock solid.
I was wondering if people would like to use Mega as a file host. I tried using Android File Host, but there were some issues and I couldn't open an account. If anyone objects to using Mega, please let me know. I will make an additional upload on Drive or another file host.
Click to expand...
Click to collapse
Would really appreciate if the build is uploaded on other platform too. Mega is kind of difficult for mobile users
abhifx said:
Would really appreciate if the build is uploaded on other platform too. Mega is kind of difficult for mobile users
Click to expand...
Click to collapse
I made an additional upload link on Google Drive. I will also upload the rom to Android File Host.
Really nice !
The tablet is not butter smooth, but really close to ! For a Nexus 7... it's an amazing improvement.
Any custom kernel to advise ?
AICProcks! said:
I made an additional upload link on Google Drive. I will also upload the rom to Android File Host.
Click to expand...
Click to collapse
well that did it. clean installed and everything seems to be at least as good as Lineage OS plus more feature to boot. will put some load and see how far it goes.
Ooh nice mate, I just got a Nexus 7 today and I'm looking for a fresh 7.1.2 ROM to try on it. Never had crDroid before so will defo give this a go!
Sent from my OnePlus X using XDA Labs
---------- Post added at 02:24 PM ---------- Previous post was at 02:19 PM ----------
Pumpk1in said:
Really nice !
The tablet is not butter smooth, but really close to ! For a Nexus 7... it's an amazing improvement.
Any custom kernel to advise ?
Click to expand...
Click to collapse
Any LOS compatible kernel should work.
Sent from my OnePlus X using XDA Labs
Pumpk1in said:
Really nice !
The tablet is not butter smooth, but really close to ! For a Nexus 7... it's an amazing improvement.
Any custom kernel to advise ?
Click to expand...
Click to collapse
Like geko95gek said, any LineageOS compatible kernel should work. The reason why I chose AndDiSa's kernel is that it seems to provide a relatively good experience and the battery seems to last longer between charges. However, if anyone else has any recommendations for a custom kernel, let everyone know your experience with the kernel.
Hello, i am new to this, and trying to to put fresh life into my old tablet (NEXUS 2012)
I know this ROM is for the grouper version, i have tilapia, i hoped i could install this and not use the 3G features, but TWRP errors saying "device is talipa and ROM is grouper" is there a way to force TWRP to install, or will it simply not work unless i use a tilapia rom, any help would be appreciated, thanks.
kup1 said:
Hello, i am new to this, and trying to to put fresh life into my old tablet (NEXUS 2012)
I know this ROM is for the grouper version, i have tilapia, i hoped i could install this and not use the 3G features, but TWRP errors saying "device is talipa and ROM is grouper" is there a way to force TWRP to install, or will it simply not work unless i use a tilapia rom, any help would be appreciated, thanks.
Click to expand...
Click to collapse
Hey there,
For now, I modified this rom so that it could be compatible with Tilapia without 3g. Try this crDroid rom:. With this open gapps tilapia fix: . And of course, get open gapps arm 7.1 pico online. Let me know if it works.
Hi, Thanks for the reply, just tried the downloads and get the same fault TWRP still thinks the rom is grouper and wont install it. TWRP gives "error 7" and says the device is tilapia.
kup1 said:
Hi, Thanks for the reply, just tried the downloads and get the same fault TWRP still thinks the rom is grouper and wont install it. TWRP gives "error 7" and says the device is tilapia.
Click to expand...
Click to collapse
I was thinking about making a separate build for Tilapia that has 3g, but I don't have Tilapia so someone else would need to test it. However, before that happens or if it happens, you can just flash the TWRP for Grouper on your Tilapia. You will be able to install any Grouper rom, but it won't have 3g. In the future, if you ever decide to use an actual Tilapia rom again, you can just flash the the Tilapia TWRP back.
TWRP for Grouper is available here: https://dl.twrp.me/grouper/
Awesome stuff, works super smoothly.
I had to exit out of the GApps (by tapping the corners, as suggested [thanks!]), but then all was well.
One thing I've noticed though, when I use the Google app (that I downloaded from the play store), the Google Assistant, "Use 'OK Google' Everywhere" is greyed out... No idea why, or how to fix, but maybe someone knows?
Anyway, thanks for this, my Nexus 7 is useable once again! Hurrah!
Seems to be working great for me. Had to exit the setup by just letting the device lock. Unlocked to launcher, add google account worked fine.
I formatted to F2FS.
M3G4 said:
Awesome stuff, works super smoothly.
I had to exit out of the GApps (by tapping the corners, as suggested [thanks!]), but then all was well.
One thing I've noticed though, when I use the Google app (that I downloaded from the play store), the Google Assistant, "Use 'OK Google' Everywhere" is greyed out... No idea why, or how to fix, but maybe someone knows?
Anyway, thanks for this, my Nexus 7 is useable once again! Hurrah!
Click to expand...
Click to collapse
Before the Google Assistant problem in this rom, where you able to use this feature in other Nougat roms for Grouper? If this is your first time using a 7.1.2 Nougat rom on Grouper, maybe you can try to fix the Google Assistant problem by rooting with SuperSU and installing the "Get Assistant - Root" app by Shane Smiskol on the Google Play store. This app is intended for Nougat Nexus devices, and it might fix your problem.
AICProcks! said:
I was thinking about making a separate build for Tilapia that has 3g, but I don't have Tilapia so someone else would need to test it. However, before that happens or if it happens, you can just flash the TWRP for Grouper on your Tilapia. You will be able to install any Grouper rom, but it won't have 3g. In the future, if you ever decide to use an actual Tilapia rom again, you can just flash the the Tilapia TWRP back.[/url]
Click to expand...
Click to collapse
Thanks for the idea about swapping from tilapia TWRP to grouper TWRP, that allowed the install.
You can boot into TWRP and flash another copy of TWRP from within its menus ( 2.84 and above ), very quick and simple. (no need to have adb/fastoot)
If you decide to make a tilapia build, ill certainly give it a go.
Once again thanks for the help, the tablet will get some use now.
AICProcks! said:
Before the Google Assistant problem in this rom, where you able to use this feature in other Nougat roms for Grouper? If this is your first time using a 7.1.2 Nougat rom on Grouper, maybe you can try to fix the Google Assistant problem by rooting with SuperSU and installing the "Get Assistant - Root" app by Shane Smiskol on the Google Play store. This app is intended for Nougat Nexus devices, and it might fix your problem.
Click to expand...
Click to collapse
I didn't actually try to use it with any other roms I used prior, so I'm not 100% sure if it's an issue with the rom or not.
I tried the app you suggested before posting actually, but it didn't work. One thing I did notice, when the "Get Assistant" app went to make a backup of the procbuild file (IIRC), it said that the new file was a duplicate of the backup it made, which implies the line was already added to the rom by default?
Anyway, like I say, not a major issue.
Love having my new (old) Nexus back in a working state!
Disclaimer
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
LineageOS needs no introductions. This version of LineageOS-12.1 is a highly customised version solely for the Amazon Fire HD10
- EVEN MORE IMPORTANT: This ROM only works on devices using the bootloader hack. See <<< HERE >>> to unlock your devices.
- IMPORTANT: Do not update Magisk via the Magisk Manager App, your device will enter a bootloop if you do. Instead update Magisk via TWRP only. If you do this by accident then it is recoverable by just flashing the latest version of the ROM again (with gapps etc as required).
Rules
- Please search the thread before asking questions
- Please try to stay on topic, I know it's not always possible
- Please report bugs here
- Report only one issue per bug report
- When reporting bugs please post a logcat and/or dmesg containing pertinent information regarding the issue...
- Saying something isn't working without proper explanation will not attract any attention.
Known Issues
- Wired headphones do not work
- Camcorder does not work
Prerequisites for Installation
- Unlocked Bootloader
- TWRP Installed
Initial Installation
- Enter TWRP
- Enter wipe option
- Format Data
- Then swipe to factory reset
- Copy the ROM to your device
- Copy optional zips like gapps and magisk to device if required
- You also have the option of using micro-g framework
- Flash ROM, then optional zips
- Reboot
- And Enjoy
Upgrading to a new version
- Copy the ROM to your device
- Flash ROM
- If you use Magisk then be sure to flash that again too.
- And Enjoy
Downloads
*** Please do NOT create any mirrors ***
Lineage-12.1 for Amazon Fire HD10"
Source Code
- ROM Source: https://github.com/cm12-amami
- Kernel Source: https://github.com/ggow/android_kernel_amazon_mt8173-common
- Suez Tree: https://github.com/ggow/android_device_amazon_suez
- mt8173-common Tree: https://github.com/ggow/android_device_amazon_mt8173-common
Thanks
- @MSe1969 for the up to date cm-12.1 sources
- @k4y0z and @xyz` for the bootloader hack
- @Goayandi for the mt8173 resources
- LineageOS
XDA:DevDB Information
LineageOS, ROM for the Amazon Fire HD 8 and HD 10
Contributors
ggow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Beta Release Date: 2019-08-01
Created 2019-08-01
Last Updated 2020-05-05
Changelog / Release Notes
05 May 2020
- Fix video camera crashing system
- Update amazon binaries to update-kindle-40.6.5.4_user_654620520.bin
- Add missing dependancy libaudioutils.so
- Enable ambient light sensor
22 April 2020
- Patches up to date until April 2020 ASB patches (Unofficial)
23 August 2019
- August 2019 ASB patches (sec. string 2019-08-05)
- Additional (backported) security patches from AOSP branch 'nougat-mr2-security-release
- Privacy Browser updated to version 3.2
- SetupWizard rebranded to LineageOS
- Build libaudioroute from source
- Fixed up minor remaining issues with camcorder
- Add MD32 program and data space binaries to ramdisk (might help with power management)
- Build mediatek liblights from source
- Update power profile in overlay from stock fireos(should produce more accurate power usage stats)
- Tablet will now enter sleep state when amazon flip cover is closed.
11 August 2019
- Fixed local playback (eg. h.264, h265 etc)
- Fixed lots of other video related issues to do with codecs
- NewPipe can now play greater than 360p quality so other video centric apps may now work too.
- Can someone test video playback on youtube, facebook, instagram, plex, netflix etc and report back?
- Disable telephony (RIL and sim features)
- Fixed sdcard mountpoint - was causing the card to not be available in some cases.
01 August 2019
- Initial Release
New Build is Up
01 August 2019
- Initial Release
- Kernel sources are up
- Device configs are in progress - will be posted ASAP
- Camera works but camcorder does not
Wow, I was not expecting to see this today. I know what I'm doing when I get home!
Oh my god. Glad to see you here @ggow.
Yay! What gapps package is recommended?
coolloser said:
Yay! What gapps package is recommended?
Click to expand...
Click to collapse
I think that arm64/5.1/pico will be OK.
BTW: just for be sure: @ggow is this ROM 64 bit system based no?
Rortiz2 said:
I think that arm64/5.1/pico will be OK.
BTW: just for be sure: @ggow is this ROM 64 bit system based no?
Click to expand...
Click to collapse
Yes, 64 bit gapps should be fine. The ROM is 64 bit.
Great to see a custom rom development for this model. Appreciate all the hard work made by the Dev here.
ggow said:
Yes, 64 bit gapps should be fine. The ROM is 64 bit.
Click to expand...
Click to collapse
Cool. So I will wait until you release the device tree. I will use it as base for compile LOS 12.1 for another mt81xx device. I don't know how you do it but you are an expert with MTK tablets!
Works like a charm.
Installed it with Gapps & Magisk.
The only problem i encounter is in youtube.
The max resolution i can choose from is 360p.
Has this something to do with the build.prop?
Finalz said:
Works like a charm.
Installed it with Gapps & Magisk.
The only problem i encounter is in youtube.
The max resolution i can choose from is 360p.
Has this something to do with the build.prop?
Click to expand...
Click to collapse
I'm not sure what the issue is, but you could try YouTube Vanced. A Magisk Repo version is available (Magisk Manager > Downloads). For more info: https://youtubevanced.com
Finalz said:
Works like a charm.
Installed it with Gapps & Magisk.
The only problem i encounter is in youtube.
The max resolution i can choose from is 360p.
Has this something to do with the build.prop?
Click to expand...
Click to collapse
Follow this:
https://forum.xda-developers.com/showpost.php?p=79654113&postcount=3
Nice, just now saw this!
Any chance you want to work on pie?
Have all the sources on github, if you want to look into it.
EDIT:
Just noticed the link to unlock points to the Fire 7 unlock thread.
k4y0z said:
Nice, just now saw this!
Any chance you want to work on pie?
Have all the sources on github, if you want to look into it.
EDIT:
Just noticed the link to unlock points to the Fire 7 unlock thread.
Click to expand...
Click to collapse
Hi @k4y0z, yes for sure will look into pie.
I want to create a stable cm-12.1...
Then we can at least have a stable ROM whilst working on future versions.
I'll soon push all my device configs once I've sorted out the mess from today's prototyping.
Thanks for the head's up about the unlock link been wrong... Updated now
ggow said:
Hi @k4y0z, yes for sure will look into pie.
I want to create a stable cm-12.1...
Then we can at least have a stable ROM whilst working on future versions.
I'll soon push all my device configs once I've sorted out the mess from today's prototyping.
Click to expand...
Click to collapse
Yes definitely makes sense, and in hindsight would have spared me a lot of headaches starting with 12.1
My kernel has a few patches that might also be interesting for 12.1 such as SDCARDFS:
https://github.com/chaosmaster/android_kernel_amazon_suez/tree/lineage-16.0
Haven't yet properly upstreamed the kernel, but still planning to (unless you do first )
@ggow, one more thing I'd like to mention.
You could fix the symlinks for boot and boot_x like I'm doing in TWRP:
https://github.com/chaosmaster/android_device_amazon_suez/blob/master/recovery/root/fix-symlinks.sh
That way updating Magisk should also work with MagiskManager.
Netflix working for anyone? I've tried the static wallpaper fix, magisk lib module, magisk hide, and anything else I could think of. 5.10 error mostly, 0013 with older Netflix apks.
just to let you know, After installation, on the setup screen, I keep getting *Google services framework has stopped* message and it doesn't let me go beyond that screen.
---------- Post added at 05:40 AM ---------- Previous post was at 05:14 AM ----------
Just as an update, after flashing, the Os goes into setup mode but keeps saying "google services framework has stopped"
coolloser said:
Netflix working for anyone? I've tried the static wallpaper fix, magisk lib module, magisk hide, and anything else I could think of. 5.10 error mostly, 0013 with older Netflix apks.
Click to expand...
Click to collapse
I had similar problem on the Fire HD 8 using LOS 14.1. I just reinstalled the release from TWRP (dirty, no wiping) and then Netflix worked fine. Experience is from a different platform and rom, but might be worth a shot.
---------- Post added at 06:00 AM ---------- Previous post was at 05:54 AM ----------
sakibstark said:
just to let you know, After installation, on the setup screen, I keep getting *Google services framework has stopped* message and it doesn't let me go beyond that screen.
---------- Post added at 05:40 AM ---------- Previous post was at 05:14 AM ----------
Just as an update, after flashing, the Os goes into setup mode but keeps saying "google services framework has stopped"
Click to expand...
Click to collapse
I personally flash the OS first, run it once and the reboot to twrp to install GAPPS. It might not matter, but sounds like your gonna be reinstalling something anyway.
Personally, I'd re-download GAPPS and then try that install again first. If that doesn't fix it, worth trying from scratch.
AdityaKevin said:
Code:
#include <std_disclaimer.h>
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Potato Open Sauce Project is a butter smooth Android aftermarket firmware. We handpicked the best features around and are adding our own sauce to it.
Get ready to taste the unique features it brings with itself.
We aim to deliver an experience with original ideas and features along with the useful things the community is accustomed to.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte.
IR camera
Known issues:
Dt2w toggle on settings => display
Maybe usb tethering, didnt check
[SIZE=+1]Clean Install[/SIZE]
- Backup all your data (Important)
- Wipe /system, /data , /cache ,/vendor ,/dalvic
- Flash the ROM + GApps which has setupwizzard included ( mandatory ) + Magisk (for root)
- Reboot
Rom:
https://sourceforge.net/projects/ga...11-croquette.v3.1.7+12.Community.zip/download
[SIZE=+1]Credits[/SIZE]
- Google for AOSP
- Team Potato
- AOSiP
- CarbonROM
- Dirty Unicorns
- LineageOS
- Team Lawnchair for Lawnchair Launcher
XDA:DevDB Information
Potato Open Sauce Project (10) for Redmi 3S/X, ROM for the Xiaomi Redmi 3S/X
Contributors
Contributors:
All of POSP Team
AdityaKevin
Thanks to
Thanks to :
zeelog
darshan1205
Source
Source Code:
Kernel_Source
Rom_Source
ROM OS Version: 10
ROM Kernel: Linux 3.18.x
Based On: AOSP
Version Information
Status: Stable
Created 2019-09-23
Last Updated 2020-04-11
Click to expand...
Click to collapse
Pru
Does this build have Network speed meter?
sinha500 said:
Does this build have Network speed meter?
Click to expand...
Click to collapse
Not yet
Great ROM, thanks dev. Just one small issue, whenever i open ola/uber app, it shows high location accuracy required even though GPS is turned on. Any solution for this?
Do I need to wipe internal because my data is encrypted??
Bhavesh_L said:
Great ROM, thanks dev. Just one small issue, whenever i open ola/uber app, it shows high location accuracy required even though GPS is turned on. Any solution for this?
Click to expand...
Click to collapse
Set app location permission
rkjha said:
Do I need to wipe internal because my data is encrypted??
Click to expand...
Click to collapse
Decrypt first
Update is here 30-09-2019 (link updated)
- Add missing aptx blobs from crosshatch
- Add thermal controller system
- kernel : add config for pstore support
Note : use google message instead of default one, because aosp messenger is broken for now
Good afternoon! Is an update expected? There are frequent reboot s.
K7jhin said:
Update is here 30-09-2019 (link updated)
- Add missing aptx blobs from crosshatch
- Add thermal controller system
- kernel : add config for pstore support
Note : use google message instead of default one, because aosp messenger is broken for now
Click to expand...
Click to collapse
Any new update?
Good News ... April Fools ? No xD
Changelog 2020-04-01 :
1. March security patch
2. MTP issue fixed
3. Internet data issue fixed
4. Remove device is HD capable notification
5. No more aggressive kill app
6. POSP Upstream
7. DISCO
OooO why so quiet here...
Flash and speak up more about your experience here
Device Changelog 2020-04-07 :
• Selinux Enforcing
• User build variant
• Updated Graphics/GPS/Wifi Display/Media/Thermal/Sensors/Perf/Widevine Blobs From LA.UM.8.6.r1-04000-89xx.0
• Fixed internet data after disconnecting form wifi
• Fingerprint should work for both sensor, thanks @JacobDeepu ( flash and report lol, i dont have goodix )
• Fixed usb-otg issue ( external sdcard should work, i dont have it so i cant test )
• Fixed lag with HW decoder video player
• Improvement perfboost
Notes :
- Please flash gapps which has setupwizzard included to avoid any issue
K7jhin said:
OooO why so quiet here...
Flash and speak up more about your experience here
Device Changelog 2020-04-07 :
• Selinux Enforcing
• User build variant
• Updated Graphics/GPS/Wifi Display/Media/Thermal/Sensors/Perf/Widevine Blobs From LA.UM.8.6.r1-04000-89xx.0
• Fixed internet data after disconnecting form wifi
• Fingerprint should work for both sensor, thanks @JacobDeepu ( flash and report lol, i dont have goodix )
• Fixed usb-otg issue ( external sdcard should work, i dont have it so i cant test )
• Fixed lag with HW decoder video player
• Improvement perfboost
Notes :
- Please flash gapps which has setupwizzard included to avoid any issue
Click to expand...
Click to collapse
friend can you please share sources
whileloop said:
friend can you please share sources
Click to expand...
Click to collapse
He's doing great job.. You can check here for his source.. Thanks a lot sir for your great effort..
https://github.com/sweetyicecare
Enjoy..
Swamoy said:
He's doing great job.. You can check here for his source.. Thanks a lot sir for your great effort..
https://github.com/sweetyicecare
Enjoy..
Click to expand...
Click to collapse
Thanks
whileloop said:
friend can you please share sources
Click to expand...
Click to collapse
How about check main page ? xD
K7jhin said:
How about check main page ? xD
Click to expand...
Click to collapse
no dt mentioned
Small updates 2020-04-11 :
1. April security patch
2. Fix default screenrecorder
3. Switch back to userdebug
4. POSP upstream
"Why so bored changelog" well im lazy , just flash and enjoy :")