Related
hi all...its my 1st thread here, i hope its gonna usefull. im sorry if my english bad. And i couldnt insert pic aoutomatic because im new member with 2 post…so u can open the picture on new tab with change the "*" to "." check it..!!!
before starting u must to download software first and install it all:
-HTC DIAG/ samsung driver -DFS 3.3.07 -to view the multicarrier u can use QXDM 3.1.2. 714 -and QPST to connect to QXDM -net. framework 2.0 or newer...
ryt. u just need 10 minute to read this tutor and understand this tutor then 5 minutes to solve ur rev b problem.
1st step connect ur android to computer with diag mode (htc) modem mode (samsung) and debugging on. (samsung must choose on DM tab :samsung2. after that open the DFS connect the port with double click the shown port:
i39.tinypic*com/k9h7m.jpg (Open manual pic with change "*" to ".")
then u bringed to equipment tab :
i44.tinypic*com/2j4sq4m.jpg (Open manual pic with change "*" to ".")
after that click the PROGRAMING tab and choose NAM...click send SPC on ur up left of monitor below the port tab. then read it dun try to fill it first. see all the tab it must to complete readed from ur phone.
i43.tinypic*com/309lhkk.jpg (Open manual pic with change "*" to ".") what ur see on my parameter setting its just my improvitation, because i use TELKOM FLEXI INDONESIA networking and band running on 800 Mhz freq. if it all fill automatic on PREFFERED SETTING its ok.
next the point of the REV B...yiiihhaaaaaa
gotta DATA tab. then read again (for samsung u must re click the SEND SPC, if not u cannot load parameter from phone). after u read enter ur username and passwor on HDR AN PPP i'm sure its not yet filled, isnt ?. in de MODE menu change HDR SCP force at config from REVA MPFA to REVB MPFA (its completly easy) in the DATA CONFIG and EVDO SCP OPTION mark it all.
i40.tinypic*com/15s1mon.jpg (Open manual pic with change "*" to ".")
after u was sure about what u do. click WRITE..the click reset to reboot automatically....
to see what the hell u do 5 minute ago, after ur android reboot connect again to computer with diag mode/modem mode. then open qpst configuration and choose start programming >enter SCP> read phone. open QXDM professional >option>communication> connect port. click view > new>CDMA 1xEV>CDMA 1xEV REV.B > HDR MULTI CARRIER AIR LINK SUMMARY...if the was shown 2 carrier filled (800 Mhz) or all carrier filled(1900 Mhz) its mean u android was get REV B...
i40.tinypic*com/vsmdu1.jpg (Open manual pic with change "*" to ".")
i hope thi thread help out u guys..dun shy to ask, dun tired to learn, and dun parsimonious to share...finally thank you..
I don't understand what this does. If Rev.b is dependent on the data network of the carrier, how would doing anything to our phones benefit from it if it's not running on the back end?
foowhat said:
hi all...its my 1st thread here, i hope its gonna usefull. im sorry if my english bad. And i couldnt insert pic aoutomatic because im new member with 2 post…so u can open the picture on new tab with change the "*" to "." check it..!!!
before starting u must to download software first and install it all:
-HTC DIAG/ samsung driver -DFS 3.3.07 -to view the multicarrier u can use QXDM 3.1.2. 714 -and QPST to connect to QXDM -net. framework 2.0 or newer...
ryt. u just need 10 minute to read this tutor and understand this tutor then 5 minutes to solve ur rev b problem.
1st step connect ur android to computer with diag mode (htc) modem mode (samsung) and debugging on. (samsung must choose on DM tab :samsung2. after that open the DFS connect the port with double click the shown port:
i39.tinypic*com/k9h7m.jpg (Open manual pic with change "*" to ".")
then u bringed to equipment tab :
i44.tinypic*com/2j4sq4m.jpg (Open manual pic with change "*" to ".")
after that click the PROGRAMING tab and choose NAM...click send SPC on ur up left of monitor below the port tab. then read it dun try to fill it first. see all the tab it must to complete readed from ur phone.
i43.tinypic*com/309lhkk.jpg (Open manual pic with change "*" to ".") what ur see on my parameter setting its just my improvitation, because i use TELKOM FLEXI INDONESIA networking and band running on 800 Mhz freq. if it all fill automatic on PREFFERED SETTING its ok.
next the point of the REV B...yiiihhaaaaaa
gotta DATA tab. then read again (for samsung u must re click the SEND SPC, if not u cannot load parameter from phone). after u read enter ur username and passwor on HDR AN PPP i'm sure its not yet filled, isnt ?. in de MODE menu change HDR SCP force at config from REVA MPFA to REVB MPFA (its completly easy) in the DATA CONFIG and EVDO SCP OPTION mark it all.
i40.tinypic*com/15s1mon.jpg (Open manual pic with change "*" to ".")
after u was sure about what u do. click WRITE..the click reset to reboot automatically....
to see what the hell u do 5 minute ago, after ur android reboot connect again to computer with diag mode/modem mode. then open qpst configuration and choose start programming >enter SCP> read phone. open QXDM professional >option>communication> connect port. click view > new>CDMA 1xEV>CDMA 1xEV REV.B > HDR MULTI CARRIER AIR LINK SUMMARY...if the was shown 2 carrier filled (800 Mhz) or all carrier filled(1900 Mhz) its mean u android was get REV B...
i40.tinypic*com/vsmdu1.jpg (Open manual pic with change "*" to ".")
i hope thi thread help out u guys..dun shy to ask, dun tired to learn, and dun parsimonious to share...finally thank you..
Click to expand...
Click to collapse
Bro punya Screenshoot utk Settingan SMART ga?
kalau ada boleh PM email saya di [email protected]
Thanks
wRexz said:
Bro punya Screenshoot utk Settingan SMART ga?
kalau ada boleh PM email saya di [email protected]
Thanks
Click to expand...
Click to collapse
klw buat smart d tab NAM menu band nya pilih 1900 mhz bkn 800mhz bro....trus d tab DATA REV.B EPHRD yg dipilih bukan REV.B MPFA yg lain sama prosedurnya...
kalau susah pakai cara DFS ini cara pakai QXDM
Setelah terbit artikel tentang tutorial Rev.B menggunakan DFS, dan banyaknya yg menginginkan dengan menggunakan QXDM. kini nubee coba menulis tutor Rev.B menggunakan QXDM Professional khusus yang bagi yang tempo hari minta....sekali lagi tutor ini hanya berlaku untuk HH ANDROID yg memang mendukung untuk REV.B yg d topang dan d perkuat oleh chipset MSM6800 snapdragon generasi ke 3 dari qualcomm (bukan QSD apalagi QSC ) contoh : HTC EVO 3D CDMA, EVO VIEW, INCREDIBLE 2, dan DESIGN 4G...tutor ini berlaku untuk smua provider yg sdh menyajikan layanan REV.B seperti FLEXI dan SMARTFREN...Q:yg lain kapan nyusul ye?? A:2 provider ini aja blum menyeluruh jaring REV.B nya cuma d kota2 tertentu...hahahha
yg perlu d siapkan :
-Waktu kurang lebih 10 menit.
-Cemilan/Rokok/Kopi (if need it)
-HTC driver Usb (link nya googling aja sy cuma copy dari om aswan)
-HTC diag (link nya googling aja sy cuma copy dari om sandy)
-QPST build terserah dan QXDM Professional build 3.12.714 (googling lagi sy cuma copy dari om yoyong)
-Kabel USB yg masih bisa di gunakan (biar yg udah d gigit tikus klw masih berfungsi gak apa2)
-PC/leptop windows 2000/xp/vista/7 (yg jelas bisa jalankan QXDM, HTC diag ma driver HTC) :lol:
-Mental yang siap untuk hasil yang terburuk (paling fatal flashing ulang ama inject ulang klw salah jalan)
-Dan yang paling penting HH yg mw d oprek.
langkah2 :
instal smua mulai dari HTC Driver, HTC Diag, QPST, hingga QXDM...setalah terinstal smua sambungkan HH dengan PC/Laptop menggunakan kabel usb dalam posisi usb debugging mode d centang kemudian DIAG mode ##3424 #/call (biasanya harus d ulang diagnya karena kadang2 kluar dr mode diag dengan sendirinya)..
BAKAR ROKOK DULU (bagi yg mrokok)
buka QPST configuration trus add new port, kemudian klik "start client" dan klik "service programing" anda akan d bawa ke jendela phone selection klik ok.
gambar:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
setelah itu akan munjul jendela baru yaitu jendela service programing klik read from phone lalu akan muncul lagi prompt SPC langsung aja hit OK.
gambar:
kemudian minimize QPST dan buka QXDM. sebelum lanjut minum kopinya dulu ntar dingin..
setelah QXDM terbuka klik OPTIONS>COMMUNICATIONS akan muncul jendela pemilihan port..klik target port dan pilihlah port yg sesuai dengan port d mana HH anda terbaca seperti d QPST lalu klik ok!
gambar
klik View>Common>NV BROWSER anda akan d bawa ke jendela NV browser...tab category filter pilih DATA dan drag k bawah kursornya hingga sampay ke item 06248 kemudian klik read jika isi status nya sdh menampilkan angka 1 berarti HH anda sdh d perintah untuk menjalankan eHRPD (envolved HIGH RATE PACKET DATA) jika masih terisi angka 0 berarti fitur ini blum d aktifkan,,,eitss jgn lupa write ye......ini merupakan tahapan teknologi setelah MFPA (multi flow packet application) kemudian MFPA/EMPA (enchanted multilink packet application) dan terakhir ialah eHRPD..fitur ini juga sdh terpakai untuk jaringan LTE yg menopang kestabilan data tapi juga tergantung dari kualitas jaringan...ecmiiw yah sy cuma mahasiswa psikologi jadi harap maklum...
gambar :
setelah itu mari kita berpindah ke kolom HDR...
gambar
nah di kolom inilah segalanya terungkap..sabar minum kopi lagi...pertama2 drag ke bawah hingga ke item 04528 dan seperti d eHRPD tadi kita juga harus berjaga2 agar jika saat eHRPD tdk berfungsi (biasanya saat peralihan d daerah miskin signal dari EV-Do ke 1x) kita juga harus mengaktifkan fitur teknologi sebelumnya yaitu EMPA/MFPA...caranya sama dengan klik read jika sudah terisi dengan angka satu berarti fitur ini sdh di aktif kan jika 0 berarti fitur ini blum d aktifkan...kemudian klik write...
gambar:
kemudian ini lah yg ditunggu2...bakar rokok lagi lumayanlah ngetik,, kyk ngetik tugas kampus aja...
lihat d item 04964 deket banget kok dari item EMPA...cuma 2 item jaraknya...klik read d item tersebut lalu klik d field nya dan pilih yg no.5 HDRSCP_REVB_PROTOCOLS_WITH_EHRPD lalu cepat2 langsung klik write...*bcanda hahahah....
gambar:
kemudian klik reset yg berada d samping read.....HH anda reboot a.k.a restart (klw gk restart yh restart manual aja) tradaaaaaaaaa HH anda sdh REV.B ....untuk ngeceknya silahkan buka QXDM kembali dengan posisi debugging on dan dalam diag mode...masuk communication pilih port, lalu view > new >cdma 1Xev > 1xev rev.b > multicarrier airlink summary...jika d kolom carrier sdh terisi 2 carrier (flexi) ataw 3 carrier (smartfren) yg aktif dan berjalan berarti REV.B sudah ready d HH anda...jika tidak ada beberapa kemungkinan yaitu anda salah prosedur, ataw HH anda tdk support rev.B....
sekian tulisan ini dari saya mudah2an berguna untuk pembaca ....wassalam....
eh DWYOR yeh :laugh: ................
mantab tenan
foowhat said:
Setelah terbit artikel tentang tutorial Rev.B menggunakan DFS, dan banyaknya yg menginginkan dengan menggunakan QXDM. kini nubee coba menulis tutor Rev.B menggunakan QXDM Professional khusus yang bagi yang tempo hari minta....sekali lagi tutor ini hanya berlaku untuk HH ANDROID yg memang mendukung untuk REV.B yg d topang dan d perkuat oleh chipset MSM6800 snapdragon generasi ke 3 dari qualcomm (bukan QSD apalagi QSC ) contoh : HTC EVO 3D CDMA, EVO VIEW, INCREDIBLE 2, dan DESIGN 4G...tutor ini berlaku untuk smua provider yg sdh menyajikan layanan REV.B seperti FLEXI dan SMARTFREN...Q:yg lain kapan nyusul ye?? A:2 provider ini aja blum menyeluruh jaring REV.B nya cuma d kota2 tertentu...hahahha
yg perlu d siapkan :
-Waktu kurang lebih 10 menit.
-Cemilan/Rokok/Kopi (if need it)
-HTC driver Usb (link nya googling aja sy cuma copy dari om aswan)
-HTC diag (link nya googling aja sy cuma copy dari om sandy)
-QPST build terserah dan QXDM Professional build 3.12.714 (googling lagi sy cuma copy dari om yoyong)
-Kabel USB yg masih bisa di gunakan (biar yg udah d gigit tikus klw masih berfungsi gak apa2)
-PC/leptop windows 2000/xp/vista/7 (yg jelas bisa jalankan QXDM, HTC diag ma driver HTC) :lol:
-Mental yang siap untuk hasil yang terburuk (paling fatal flashing ulang ama inject ulang klw salah jalan)
-Dan yang paling penting HH yg mw d oprek.
langkah2 :
instal smua mulai dari HTC Driver, HTC Diag, QPST, hingga QXDM...setalah terinstal smua sambungkan HH dengan PC/Laptop menggunakan kabel usb dalam posisi usb debugging mode d centang kemudian DIAG mode ##3424 #/call (biasanya harus d ulang diagnya karena kadang2 kluar dr mode diag dengan sendirinya)..
BAKAR ROKOK DULU (bagi yg mrokok)
buka QPST configuration trus add new port, kemudian klik "start client" dan klik "service programing" anda akan d bawa ke jendela phone selection klik ok.
gambar:
setelah itu akan munjul jendela baru yaitu jendela service programing klik read from phone lalu akan muncul lagi prompt SPC langsung aja hit OK.
gambar:
kemudian minimize QPST dan buka QXDM. sebelum lanjut minum kopinya dulu ntar dingin..
setelah QXDM terbuka klik OPTIONS>COMMUNICATIONS akan muncul jendela pemilihan port..klik target port dan pilihlah port yg sesuai dengan port d mana HH anda terbaca seperti d QPST lalu klik ok!
gambar
klik View>Common>NV BROWSER anda akan d bawa ke jendela NV browser...tab category filter pilih DATA dan drag k bawah kursornya hingga sampay ke item 06248 kemudian klik read jika isi status nya sdh menampilkan angka 1 berarti HH anda sdh d perintah untuk menjalankan eHRPD (envolved HIGH RATE PACKET DATA) jika masih terisi angka 0 berarti fitur ini blum d aktifkan,,,eitss jgn lupa write ye......ini merupakan tahapan teknologi setelah MFPA (multi flow packet application) kemudian MFPA/EMPA (enchanted multilink packet application) dan terakhir ialah eHRPD..fitur ini juga sdh terpakai untuk jaringan LTE yg menopang kestabilan data tapi juga tergantung dari kualitas jaringan...ecmiiw yah sy cuma mahasiswa psikologi jadi harap maklum...
gambar :
setelah itu mari kita berpindah ke kolom HDR...
gambar
nah di kolom inilah segalanya terungkap..sabar minum kopi lagi...pertama2 drag ke bawah hingga ke item 04528 dan seperti d eHRPD tadi kita juga harus berjaga2 agar jika saat eHRPD tdk berfungsi (biasanya saat peralihan d daerah miskin signal dari EV-Do ke 1x) kita juga harus mengaktifkan fitur teknologi sebelumnya yaitu EMPA/MFPA...caranya sama dengan klik read jika sudah terisi dengan angka satu berarti fitur ini sdh di aktif kan jika 0 berarti fitur ini blum d aktifkan...kemudian klik write...
gambar:
kemudian ini lah yg ditunggu2...bakar rokok lagi lumayanlah ngetik,, kyk ngetik tugas kampus aja...
lihat d item 04964 deket banget kok dari item EMPA...cuma 2 item jaraknya...klik read d item tersebut lalu klik d field nya dan pilih yg no.5 HDRSCP_REVB_PROTOCOLS_WITH_EHRPD lalu cepat2 langsung klik write...*bcanda hahahah....
gambar:
kemudian klik reset yg berada d samping read.....HH anda reboot a.k.a restart (klw gk restart yh restart manual aja) tradaaaaaaaaa HH anda sdh REV.B ....untuk ngeceknya silahkan buka QXDM kembali dengan posisi debugging on dan dalam diag mode...masuk communication pilih port, lalu view > new >cdma 1Xev > 1xev rev.b > multicarrier airlink summary...jika d kolom carrier sdh terisi 2 carrier (flexi) ataw 3 carrier (smartfren) yg aktif dan berjalan berarti REV.B sudah ready d HH anda...jika tidak ada beberapa kemungkinan yaitu anda salah prosedur, ataw HH anda tdk support rev.B....
sekian tulisan ini dari saya mudah2an berguna untuk pembaca ....wassalam....
eh DWYOR yeh :laugh: ................
Click to expand...
Click to collapse
thanks broo....
salam kenal yak.... hehhehe
Broo.. Sist, ada yang pernah tau Tablet "MoviMax P15 Atlas"... request Review nya Dong.
Temen udah terlanjur beli, mohon pencerahan ....
.. makasii
MoviMax P15 Atlas
.. guys, Have any body Knows about, "MoviMax P15 Atlas" Tablet. My friends just bought it, and need some review about it.
and also.. some tips & trick. (include how to root It, It's seem need to re-rooting)
Thank's...
Q&A for [ROM][4.1.2][GT-S6310][09/03/14] PureKat Touchwiz Edition
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.1.2][GT-S6310][09/03/14] PureKat Touchwiz Edition. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Issues with WIFI
Hi!
Congratulations for the ROM, it's cool!
I have an issue with the WIFI, it is everytime asking for IP and can't connect. I searched in Google, a lot of workarounds and fixes, none worked for me.
I tried that Static IP, but i wonder if that only works with my home WIFI and if i found another WIFI i will have the same error?
Well, maybe you could fix this in next upgrade, because WIFI is essential for my mobile, it's the only way i can connect, my 3G is only to receive calls and messages.
And a last:
How to install the IAO upgrade? I did the same steps you gave with your last ROM upgrade, but i don't know if the first page instructions are the same for the Upgrade.
Thank you very mucha and congratultions for the ROM! A very good job! =D
it has this bug....i can't add contacts in sending a message...it closes and says messaging has stopped
maaf gan ane mau nanya nih. maaf juga ga pake bahasa inggris soalnya ane ga bisa panjang-panjang hehehe
yg pertama, seibaratnya ane install ROM ini data aplikasi sama data sistem apa harus di backup dulu pake CWM/TWRP?
yg kedua install updatenya apa harus berurutan apa boleh langsung versi yg terakhir?
terima kasih
---------- Post added at 08:34 AM ---------- Previous post was at 08:29 AM ----------
maaf gan ane mau nanya nih. maaf juga ga pake bahasa inggris soalnya ane ga bisa panjang-panjang hehehe
yg pertama, seibaratnya ane install ROM ini data aplikasi sama data sistem apa harus di backup dulu pake CWM/TWRP?
yg kedua install updatenya apa harus berurutan apa boleh langsung versi yg terakhir?
terima kasih
Taking Advantage of Google Keyboard – The Best Keyboard for Sliding
With secondary language dictionary, INDONESIAN: for Rooted Phones
There are two types of people; those who prefer typing, and those who like sliding/gesturing on the keyboard. Quite probably those type 1 persons are not aware of the advantage of sliding, or they do not have the facility to turn their keyboards into something very easy and smooth, particularly those who opt for foreign language dictionary.
I will share mine, an Indonesian dictionary, with words carefully chosen; the result of my years of work. I have gained a lot from XDA and other forums; now is my turn to give back. As this is for Indonesians, I will provide a Indonesian translation below.
INDONESIAN - Ada dua jenis orang; mereka yang memilih mengetik, dan yang memilih sistem geser pada keyboard. Mungkin sekali orang tipe 1 itu tidak sadar akan keuntungan sistem geser, atau mereka tidak punya fasilitas utk memodifikasi keyboardnya sehingga sangat mudah dipakai dan lancar, terutama mereka yang memilih kamus bahasa asing (dalam hal ini Indonesia)
Saya akan berbagi karya saya, kamus bahasa Indonesia, dengan kata-kata yang dipilih secara cermat; hasil kerja saya selama bertahun2. Saya sudah memperoleh banyak keuntungan dari forum XDA dan forum lain; sekarang saatnya saya balik berbagi.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It is clear that Google Keyboard for Android 4 has most advantage over other keyboards for those who choose sliding. This advantage can be further boosted by providing a double dictionary (point #1 above table) that I will give to you. Point #5 can be overcome by using the wonderful Shaftamle’s keyboard (see below) that he modified from Google Keyboard so as to be able to be installed as normal application. So, of all the 7 points I describe above, only #6, arrows, that is missing from the keyboard. Shame to Google engineers who does not seem to notice the importance of arrows in keyboards. Also for (1) making unacceptable changes in Lollipop keyboard that causes it not to recognize previous version’s personal dictionary, and (2) eliminating one of the most important features, that is point #4.
INDONESIAN - Jelaslah bahwa Google Keyboard untuk Android 4 punya banyak kelebihan dibanding keyboard lain bagi mereka yg suka sliding. Keunggulan ini dapat ditingkatkan lagi dengan menyediakan kamus dwibahasa (butir #1 di tabel atas) yang akan saya sediakan bagi Anda. Butir #5 dapat diatasi dengan memakai keyboard Shatamle yang mengagumkan itu (lihat bawah), yang dimodifikasinya dari Google Keybboard sehingga dapat di-install sbg aplikasi normal. Jadi, dari semua 7 butir di atas, hanya butir #6, panah, yang tidak ada pada keyboard. Sungguh memalukan, ahli IT Google tampaknya tidak sadar akan pentingnya keberadaan “panah” pada keyboard. Dia juga (1) membuat perubahan yang tidak dapat diterima pada keyboard Lollipop yang menyebabkannya tidak mengenal kamus pribadi dari versi sebelumnya, dan (2) menghapus salah satu fasilitas terpenting, yakni butir #4.
Click to expand...
Click to collapse
What do I mean by “Show expansion in ONE stroke” in point #4? It mean, I slide over the keyboard, and suddenly the expanded word or sentence is shown in the text. I do not have to choose it again from the list above the keyboard as the case in Lollipop keyboard (in Redmi Note 2) or SlideIt. This saves hundreds of typing (or choosing) each day. What if one gets the wrong sentence? With one back-space, the whole sentence will be deleted. Easy…
INDONESIAN - Apa yang saya maksud dengan “Show expansion in ONE stroke” pada butir #4? Artinya, jari saya digeser pada keyboard dan tiba2 kata atau kalimat panjang muncul di teks. Saya tidak perlu memilih lagi dari list di atas keyboard, seperti terjadi pada keyboard Lollipop (pada Redmi Note 2) atau SlideIt. Ini menghemat ratusan ketikan (atau pilihan) tiap hari. Bagaimana kalau kalimat tadi salah? Dengan satu back-space, seluruh kalimat terhapus. Mudah…
Click to expand...
Click to collapse
Principles:
The Google personal dictionary is kept under User Dictionary application and not LatinIME.apk or Google keyboard.apk
The file name of the user dictionary is userdict.db.
This is a SQL database that can be opened by most SQL database editors. It can be send to PC, and easily modified there.
Prinsip:
Kamus pribadi Google disimpan oleh aplikasi User Dictionary dan bukan LatinIME.apk atau Google keyboard.apk
Nama file dari kamus pribadi (bahasa Indonesia) itu adalah userdict.db.
Ini adalah SQL database yang dapat dibuka oleh kebanyakan editor SQL database. Dia dapat ditransfer ke PC, dan dengan mudah dimodifikasi di situ.
Click to expand...
Click to collapse
Installation Requirements:
You must be rooted.
You must be on Android 4.0 or higher. Further requirements can be read from Shaftamle page (Read here http://forum.xda-developers.com/android/apps-games/lollipop-keyboard-phones-root-t2910268)
Download Shaftamle Lollipop+123+keyboard.apk (Version 1.1) (https://www.androidfilehost.com/?fid=95855108297850885). You can choose other themes if you wish.
Download SQL Debugger from Google Play
Download userdict.db from here (https://drive.google.com/open?id=0ByRj7PCj9eX8LTlaeUwwSVNubUE).
If you intent to make extensive modification to the user dictionary, download SQLite editor to the PC; most easily, use Portable Apps (http://portableapps.com/apps/development/sqlite_database_browser_portable). If not, don’t download.
For learning shortcuts, the file can be downloaded here (https://drive.google.com/open?id=0ByRj7PCj9eX8aE94V2hrSjBmbTQ).
Syarat untuk Instal:
HP harus sudah di- root.
Android versi 4.0 atau lebih tinggi. Syarat lain dapat dibaca pada halaman Shaftamle (Baca di sini http://forum.xda-developers.com/android/apps-games/lollipop-keyboard-phones-root-t2910268)
Download Shaftamle Lollipop+123+keyboard.apk (Versi 1.1) (https://www.androidfilehost.com/?fid=95855108297850885). Anda dapat memilih tema lain kalau mau.
Download SQL Debugger dari Google Play
Download userdict.db dari sini (https://drive.google.com/open?id=0ByRj7PCj9eX8LTlaeUwwSVNubUE).
Kalau Anda berniat banyak memodifikasi kamus yang ada, download SQLite editor di PC; paling mudah, pakai Portable Apps (http://portableapps.com/apps/development/sqlite_database_browser_portable). Kalau tidak, tidak perlu download.
Untuk mempelajari shortcuts, file dapat di-download di sini (https://drive.google.com/open?id=0ByRj7PCj9eX8aE94V2hrSjBmbTQ).
Click to expand...
Click to collapse
Installation
Install Shaftamle keyboard.apk normally
Put the userdict.db in Sdcard and remember its location (e.g. I choose sdcard1)
Install SQL Debugger on phone
Open SQL Debugger --> App --> User Dictionary --> userdict.db. This will be displayed. Click that.
(Remember, the old userdict.db will be erased and overwritten! Backup with Titanium if you will.)
Choose “Restore from File”.
Browse and find the downloaded userdict.db. Click, and …
Done… You have a Google keyboard with 123 number row above plus double language dictionary.
Instalasi
Instal Shaftamle keyboard.apk seperti biasa
Taruh userdict.db pada Sdcard dan ingat2 lokasinya (misalnya, saya pilih sdcard1)
Instal SQL Debugger pada HP
Buka SQL Debugger --> App --> User Dictionary --> userdict.db. Ini akan ditampilkan. Klik saja itu.
(Ingat, file userdict.db lama akan dihapus dan ditimpa! Backup dengan Titanium kalau perlu)
Pilih “Restore from File”.
Browse dan cari file userdict.db yang tadi di-download. Klik, dan …
Selesai… Anda sudah punya Google keyboard dengan angka 123 di atas keyboard serta kamus dwibahasa, Inggris dan Indonesia.
Click to expand...
Click to collapse
=============================
Also read: Typing, Sliding, Shortcut in Google Keyboard
How to modify the personal dictionary:
The simplest: modify straight from Google keyboard settings in your phone: See here
Use the SQLite Debugger application in phone: see here
Use portable SQLite Database Browser in PC: see here
Cara mengubah kamus pribadi:
Paling mudah: ubah langsung dari setting Google keyboard di HP: lihat sini
Gunakan aplikasi SQLite Debugger pada HP: lihat sini
Gunakan SQLite Database Browser portable pada PC: lihat sini
Click to expand...
Click to collapse
=========================
How to modify shortcuts:
Any word or letter combination can be used as shortcut, for instance for “President Obama” you can use “ APQKH” for the shortcut, but will you remember that?
Use shortcuts that you quite probably will remember (certainly you can not remember ALL of them).
“PRESO” might work, but may be complicated by other similar shortcuts. I guess “PRESOB” would be better. Just try and try until you can find a shortcut that work most of the time.
Choose neighboring letters if you can, or letters that are in line with the finger stroke
If a shortcut fail you 50% of the time, you may want to change that shortcut. 80% success rate should be the target (i.e. the gesture fails only one in five attempts).
Cara ubah shortcut:
Setiap kata atau kombinasi huruf dapat dipakai sbg shortcut, misalnya untuk “President Obama” dapat dipakai “APQKH” untuk shortcut, tapi apa Anda akan ingat?
Gunakan shortcut yang mungkin sekali akan Anda ingat (pasti Anda tidak bisa ingat SEMUA).
“PRESO” mungkin bisa, tapi mungkin akan terganggu oleh shortcut lain yang serupa. Saya duga “PRESOB” mungkin lebih baik. Coba dan coba lagi sampai Anda menemukan shortcut yang dapat kerja bagus.
Pilih huruf2 yang berdekatan kalau mungkin, atau huruf yang berada pada satu garis dengan geseran jari Anda
Kalau shortcut gagal pada 50% percobaan, mungkin itu perlu diubah. Targetkan angka keberhasilan 80% (artinya tiap kali geser, hanya satu dari lima geseran yang gagal).
Click to expand...
Click to collapse
Big thanks to @Shaftamle !!! without his work, this will not work in Lollipop
Simply click "THANK YOU" if you find this helpful.
See Shaftamle's full thread here...
=========
terima kasih atas tutorialnya ?
Sent from my A0001 using Tapatalk
nugroho2 said:
Reserved 2
See Shaftamle's full thread here...
=========
Click to expand...
Click to collapse
Very useful, Thanks for the guide ?
bro ada dict yang lebih simple ga? Banyak kata yg ane ketik akhir nya yg keluar kata2 singkatan seperti ABC, ABG, AC, OMZ, TT, UMR, dan banyak lg yg sebetulnya menurut ane ga perlu di tambah ke dict, (lha wong cuma 2-3 kata), kalimat2 kek gitu mungkin lebih baik user sendiri yg menambahkan sesuai daily use mereka, sorry master IMO ?
Click to expand...
Click to collapse
You must delete the unwanted words yourself.
Use SQLite Debugger
Export the dictionary to SDCard, and then to PC
Open using SQLite Database Browser, edit and save.
Import the edited dictionary.
Done...
Mesti buang sendiri. Kan dah dikasih tau caranya.
Ini mesti pake Inggris atau ane kena marah admin. Nanti dipindah ke Kaskus aja deh
nugroho2 said:
See Shaftamle's full thread here...
=========
Click to expand...
Click to collapse
nugroho2 said:
You must delete the unwanted words yourself.
Use SQLite Debugger
Export the dictionary to SDCard, and then to PC
Open using SQLite Database Browser, edit and save.
Import the edited dictionary.
Done...
Mesti buang sendiri. Kan dah dikasih tau caranya.
Ini mesti pake Inggris atau ane kena marah admin. Nanti dipindah ke Kaskus aja deh
Click to expand...
Click to collapse
Ahh alright, already remove some of them through Sqlite debugger, the problem is too much unwanted word, also unwanted shortcut that need to edit and remove. Might I need to edit it using my desktop.
Pindah ke kaskus aja deh. Sudah ane pindah. Search aja google keyboard tetap yang terbaik
Thank you suhu, ane coba dulu
finally support indonesian language
is this work with marshmallow?
dwiedunia said:
is this work with marshmallow?
Click to expand...
Click to collapse
Should be...
Yes. It does work with marshmallow. But soon it will be replaced by the original revised Google keyboard named Gboard.... It will have all the facilities of Shaftamlee's keyboard, but not now. At present it is still in developmrnt stage and shortcuts are not handled well enough. I am still using the old keyboard.
dwiedunia said:
is this work with marshmallow?
Click to expand...
Click to collapse
Yes... But rather difficult with Nougat 7.1++
Hello everyone, I hope you are all well
I bought a new car screen,8 Core GPS Radio BT WIFI 4G Adas DSP Touch Screen 4 GB RAM, 64 GB internal memory
But unfortunately, when I tried to update, it disconnected from work, and no data appeared on the screen, only a black screen and the side buttons make a sound.
For this reason, I need your help in providing the original ROM to work again on the 10-inch screen
I only own this image of the device data & Main board photo
Please take care and help and thank you for your interest
System Info
kernel:#293 SMP PREEMPT Mon Jul 18 18:11:45 CST 2022
platform63)6315 F Full Band carplay3
touch:goodix 911_1060 (fede0846)E:0
panel:L10P8-MIPI-yt9.0-INC9707_720X1280 20210913 17:24:2908 14:25:10
radiotype:tda7708_7708(0)
audiotype:dsp55
cs0mr:12000701,cs1mr:12000701
emif:1-d6-103-A3A561
f_v:Ls50
APP 1280x720 2022-06-21 16:51:45
System 2022-07-18 18:30:37 Monday
mohamed_mohi said:
Halo semuanya, saya harap kalian semua baik-baik saja
Saya membeli layar mobil baru, 8 Core GPS Radio BT WIFI 4G Adas DSP Touch Screen 4 GB RAM, 64 GB memori internal
Namun sayangnya, ketika saya mencoba memperbarui, itu terputus dari pekerjaan, dan tidak ada data yang muncul di layar, hanya layar hitam dan tombol samping yang mengeluarkan suara.
Untuk itu, saya membutuhkan bantuan Anda dalam menyediakan ROM asli agar berfungsi kembali di layar 10 inci
Saya hanya memiliki gambar data perangkat & foto papan utama ini
Harap berhati-hati dan membantu dan terima kasih atas minat Anda
Sistem Informasi
kernel:#293 SMP PREEMPT Sen 18 Jul 18:11:45 CST 2022
platform 63)6315 F Full Band carplay3
sentuh:goodix 911_1060 (fede0846)E:0
panel:L10P8-MIPI-yt9.0-INC9707_720X1280 20210913 17:24:2908 14:25:10
jenis radio:tda7708_7708(0)
jenis audio:dsp55
cs0mr:12000701,cs1mr:12000701
emif:1-d6-103-A3A561
f_v:Ls50
APLIKASI 1280x720 21-06-2022 16:51:45
Sistem 2022-07-18 18:30:37 Senin
Click to expand...
Click to collapse
is you include the lcdconfig file when updating?
Post MCU version
marchnz said:
Post MCU version
Click to expand...
Click to collapse
sorry i don't have any info
only this one
avtintellegent said:
is you include the lcdconfig file when updating?
Click to expand...
Click to collapse
iam just try to update once with damge one so i delete it
Now i need full rom update for my head unit
mohamed_mohi said:
sorry i don't have any info
only this oneView attachment 5780431
Click to expand...
Click to collapse
Look and post
mohamed_mohi said:
saya hanya mencoba memperbarui sekali dengan yang rusak jadi saya menghapusnya
Sekarang saya membutuhkan pembaruan rom lengkap untuk unit kepala sa
Click to expand...
Click to collapse
mohamed_mohi said:
saya hanya mencoba memperbarui sekali dengan yang rusak jadi saya menghapusnya
Sekarang saya membutuhkan pembaruan rom lengkap untuk unit kepala saya
Click to expand...
Click to collapse
SayaThis is the software version that I have uploaded on tele. If there is an error in the red writing in the status bar, you can provide input
avtintellegent said:
SayaThis is the software version that I have uploaded on tele. If there is an error in the red writing in the status bar, you can provide input
Click to expand...
Click to collapse
Software head unit Android
software untuk perbaikan bug mic dan akan menghapus semua aplikasi pihak ke-3,,data dan akun
t.me
avtintellegent said:
Software head unit Android
software untuk perbaikan bug mic dan akan menghapus semua aplikasi pihak ke-3,,data dan akun
t.me
Click to expand...
Click to collapse
thanks i will try
hello all
I am very tired trying to find rom for my unit
After trouble, I found the firmware, but the sound only works and the screen is black.
And this is my monitor model SAT101B030142R18-45143M048IN-517
Please help me to find the firmware for the display
mohamed_mohi said:
hello all
I am very tired trying to find rom for my unit
After trouble, I found the firmware, but the sound only works and the screen is black.
And this is my monitor model SAT101B030142R18-45143M048IN-517
Please help me to find the firmware for the display
Click to expand...
Click to collapse
Which ROM did you use to flash your unit?
And why did you flash your unit if you don't even know what kind of unit you have?
And if this is the only information you have for us, you will never succeed.
Your first images show your screen is a MIPI screen. Did you use a MIPI firmware?
What does your reseller tell you? Can he give you a new firmware?