Hello guys,
So I was trying to root my phone. Tried a couple of times but it didn't work. It was never succesfully downloaded with Kingoroot. So I did a factory a reset and tried again with rooting. Didn't work so I wanted to do another factory reset and reboot the system. I accidently pressed reboot to bootloader. Now its stuck. Even when I do a hard factory reset its still stuck. Is there anyone that can help? I feel horrible at the moment
Samsung S6
SM-G920F
Android 7.0
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
And if you want just root the device, there is very easy method to do this;
Just download this;
https://download.chainfire.eu/733/CF-Root/CF-Auto-Root/CF-Auto-Root-zeroflte-zerofltexx-smg920f.zip
And apply it according to this video;
Related
Hi. I use Galaxy S6 SM-G920FQ and I installed a custom rom.
Rom has problems and I want to return original rom but I couldn't.
I wonder "What can I make with twrp?" and made mistake. I changed file system.
So I can't enter to twrp and I don't know what to do. Anyone have information about this? :crying: :crying:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: PHN
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
I get this after trying to flash rom
http://prntscr.com/id7qsk
Phone shows ''An error has occurred while updating device....use emergency recovery...'' which doesnt even work...
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
Click to expand...
Click to collapse
Thank you, spent whole day trying different things...
Hey guys I have a g920f and was just messing around yesterday
I installed this rom https://forum.xda-developers.com/galaxy-s6/development/rom-revolution-note7-port-t3461397 with TWRP and now my touch input is all messed up, even in TWRP. I cant swipe in twrp so I flashed some old version of philz where i managed to format everything, I even reflashed my pit and reflashed TWRP but the touch input is still totally messed up
I can't even swipe in TWRP so if I cant fix this my phone is going to be a brick. **** xD
Anyone encountered this before?
Also I cannot restore via Smart Switch or Kies because it says unsupported device. I guess its because i didn't play by samsung rules?
Eklondh said:
Also I cannot restore via Smart Switch or Kies because it says unsupported device. I guess its because i didn't play by samsung rules?
Click to expand...
Click to collapse
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
When your device is ready to set up, try to setup it. You need to go to dialer application.
And then dial *#2663# in the dialer and update the thouch screen penal firmware by selecting 'TSP FW update (General)' button.
Original contributer for this fix is @Wuby986
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920F
Region: XEF
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone will boot up as completely refreshed device.
When your device is ready to set up, try to setup it. You need to go to dialer application.
And then dial *#2663# in the dialer and update the thouch screen penal firmware by selecting 'TSP FW update (General)' button.
Original contributer for this fix is @Wuby986
Click to expand...
Click to collapse
Holy **** it worked!! Omg Man u really saved my phone.. ****
If I'm ever in Turkey Im gonna buy u a beer for sure!!
Also, this post should be stickied somewhere I mean its pretty damn important if anyone happens to mess up their phone.
A thousand thanks again dude, You are the ****ing best!!
I have a Galaxy S6 Flat G920I running Ressurection Remix on Android 8.1.0, I already tried flashing the stock rom with Odin but it gave me an error no matter how many times i tried. Is there another way to flash the stock rom?
Just flash in TWRP any custom stock rom.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920I
Region: NPL
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
forumber2 said:
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G920I
Region: NPL
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.
Click to expand...
Click to collapse
THANK YOU SO MUCH IT WORKED
I had so many problems with rr and now i can have the stock rom back without the few bugs plus i can get full samsung support
Since I can't find the thread about How to return to stock here. I've decided to follow instructions on youtube. Downloaded the right variant for my model. Followed the procedures on Odin (using the latest version). Everything is okay until I'm kinda stuck at the logo for a couple of minutes. What could go wrong? Installation by odin was successful (PASS!).
SM-G925K variant
I assume that your device is SM-G920F.
Download and run this;
https://forum.xda-developers.com/attachment.php?attachmentid=3803841&d=1467715462
When you open the program, type the values given here;
Model: SM-G925K
Region: KTC
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run this Odin (even if you have another one);
https://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone in download mode.
After that, press Start. When Odin done the installation, phone will restart. When it is restarted, disconnect the cable.
After 1-2 minutes, phone should boot up as completely refreshed device.