Related
I decided to write a guide on how to recover from a bricked OnePlus One. This is my first guide.
About me: I am a newbie on Android.However, the XDA community has taught me a lot about my Android phone for the first month of using it. That's right! I have only been using Android for less than one month so take this guide with a grain of salt. But if you happen to soft brick your One, this is the guide to turn to. I have created two mind-bending/heartbreaking/frightening scenarios that I have experienced. Though, resolved thanks to this community.
Note: This will wipe your phone!
Scenario 1:
Soft bricked, (CM gear keeps spinning but won't boot to lock screen)
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
How to find out if you have unlocked bootloader:
1. Locate the folder where you installed the OPO Toolbox.
2. Hold Shift and right click on ANY white area within the folder.
3. Left click 'Open command window here'
4. Type:
fastboot oem device-info
If it returns True on tampered. Then you have unlocked your bootloader.
I hope this guide helps solve your soft-bricked problem. Good luck!
I suggest that a mod moves this to the General section
pandasa123 said:
I suggest that a mod moves this to the General section
Click to expand...
Click to collapse
Report the thread if you think its necessary.
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Digital Arm said:
Well I got this FAILED in the command line, and afterwards didnt got a re- setup...
what am I doing wrong here?:crying:
Click to expand...
Click to collapse
You don't have an unlocked bootloader.
Transmitted via Bacon
timmaaa said:
You don't have an unlocked bootloader.
Transmitted via Bacon
Click to expand...
Click to collapse
Thx got it:cyclops:
Scenario 2: Updated kernel on a non-compatible firmware.
Soft bricked, screen on 1+ logo and won't boot to lock screen.
Solution:
1. Download the toolbox from: (Make sure you download your version)
http://forum.xda-developers.com/oneplus-one/development/toolbox-oneplus-one-toolbox-t2808987
2. Install the file.
3. Disconnect your OnePlus One from computer and power off your phone.
4. Go into Fastboot Mode (Volume Up + Power button) wait on vibrate
5. Plug in your OnePlus One.
6. Locate and open the OPO Toolbox.
7. Click Flash CM XNPH22R.
8. You should see command prompt open, just wait until it finishes doing it's thing.
9. Unplug and power off your phone.
10. Power ON your phone and wait until it prompts you re-setup your phone.
Congrats you have just fixed your phone from a soft brick. Simply follow the video from the link provided on step 1 to re-root your phone.
Note: If you have unlocked your bootloader, you do not need to unlock it again.
Hi i am stuck in scenario 2...I did all a u said but i cant flash CM XNPH22R ...where do i find this file...i cant find it on my phone either ..pls help ??
Thank god for this thread omg, saved my life
Locked Bootloader
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
RiccoSuave said:
This didn't work...
My phone is Soft Bricked (oneplus logo freeze) locked bootoader and usb debuging is not enabled.
What can I do to fix it??
Click to expand...
Click to collapse
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Champi12301 said:
But why happened this ? Whats the last actions attempted to do with the phone before the brick?
Tecleado desde mi 1+1.
Click to expand...
Click to collapse
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
RiccoSuave said:
I did an ota update and it went in to a boot-loop, so I went into fast-boot and accidentally locked the boot-loader.
I think I have to try to hard-brick it and try the hard-brick solution with the qualcom drivers.
Click to expand...
Click to collapse
Then first you need to unlock the bootloader via fastboot,but that action erases all data. I assume,if you modified the boot via fastboot, USB DEBUGGING is working,so after try to do the softbrick tutorial of the thread.
Tecleado desde mi 1+1.
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
deanwinchester370 said:
how do i know which tool box version is mine ?
---------- Post added at 07:42 PM ---------- Previous post was at 07:26 PM ----------
i tried the fastboot method, i successfully run alll the commands but still stuck in the bootloop.
i even tried adb, but i cant go into recovery mode for my computer to detect it. The weird thing is i can easily go into the fastboot mode but for some reason i can go into recovery mode. i tried turning of the phone by holding power button too long and then vol down + power button, still no luck, now im stuck with 2 options,
1. the toolkit solution
2. the qualcom thingy. It's been two days without my opo, and i feel so lost ! PLS if anyone sees my comments plss respond to me PLS! i willl forever be grateful to you!
Click to expand...
Click to collapse
Did you find a solution ?
I'm facing the exact same issue on my OPO.
>> bootloader locked
>> no recovery
>> impossible to unlock the bootloader
>> OPO stuck at 1+ logo and keep rebooting agin and again and again...
....i think my OPO is dead T_T
Is it a way to force the bootloader unlock ?
Please HELP !!!
Didn't work for me
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
All done
davmeva said:
I'll give the background first as it might help. I long while back I did a manual upgrade to CM12s using the guide in this video "How to Install CM12S on OnePlus One - No Root or TWRP Required, No Data LOSS" from the oneplus exclusive Youtube channel.
It worked great no problems.
I recently I got the OTA update to CM13. There were several features I didn't like so I decided to go back. I repeated the process shown in the video but now my phone gets stuck on the CM logo screen and won't go past. I tried again but the same result. Then (I can see heads shaking, sorry) I tried a factory reset from the recovery screen, still the same goes past the 1+ logo but gets stuck at the CM logo. Then I found this guide, downloaded the toolbox but when I try to plash it says "fastboot is not recognized as an internal or external command.
Any ideas?
Found a link on one of the threads here that said a guide on Reddit was useful, that didn't work as well. I am trying.
Click to expand...
Click to collapse
No one replied to this but never mind, took me two days but I now have a working phone. So you can call in the dogs, cheers
hi davmeva
did you fixed your oneplus one till now or not because i have also same situation here and no success till now .
i did by mistake all this stuff and now nothing work still same condition
if you got any solution please share it
Ok I finally got this tablet rooted using some chinese oneclick root tool worked great do to it was the only kit that was able to root it and i installed supersu apk to replace to chinese version worked and i went to update supersu and hit the twrp (not knowing what it was at the tim stupid right i know lol) and now it is stuck in the twrp/cwm bootloop and i cant get into recovery mode when i try it says updating img blah blah and restarts back into the bootloop. It is running 4.1.1 JB and has a micro sd card slot.There is a pic in the atachment because i dont know how to upload it to this post but it is just a pic no "extras" are included no viruses maleware ect just a pic
parkourgamer said:
Ok I finally got this tablet rooted using some chinese oneclick root tool worked great do to it was the only kit that was able to root it and i installed supersu apk to replace to chinese version worked and i went to update supersu and hit the twrp (not knowing what it was at the tim stupid right i know lol) and now it is stuck in the twrp/cwm bootloop and i cant get into recovery mode when i try it says updating img blah blah and restarts back into the bootloop. It is running 4.1.1 JB and has a micro sd card slot.There is a pic in the atachment because i dont know how to upload it to this post but it is just a pic no "extras" are included no viruses maleware ect just a pic
Click to expand...
Click to collapse
Super old I know but my kids tablet is doing this now. Did you ever find a fix?
KilluminatiStyle said:
Super old I know but my kids tablet is doing this now. Did you ever find a fix?
Click to expand...
Click to collapse
Pro tip: Don't bumb old threads like this. You might not even have similar problems. Instead create a new thread regdaring your issue.
Now, post your tablet info HERE:
Root staus?
Can you boot in recovery? If yes what recovery do you have?
Tablet model
Android version
What happened
What have tried to fix it
janekmuric said:
Pro tip: Don't bumb old threads like this. You might not even have similar problems. Instead create a new thread regdaring your issue.
Now, post your tablet info HERE:
Root staus?
Can you boot in recovery? If yes what recovery do you have?
Tablet model
Android version
What happened
What have tried to fix it
Click to expand...
Click to collapse
Root Status = ROOTED
I cannot boot into recovery mode (but when i try i get this, look in pic 2&3)
Tablet Type = HKC (NOT HTC) p776a
ANDROID Version I think (98% shure) is 4.1.1 beta JB
What happened = A few years ago 2013 i think a got this tablet then i learned about rooting, roms, and such so i spent the next year or two trying to root the tablet. I finally got it rooted with a chinese root program and all was well (i don't remember the name of the program) then there was a update for su and i pressed the twrp/cwm mode on accident (I think I was talking to someone at the time) and now it does what is shown in the image 1 it is on some boot loop. When I try to access the hboot menu it does what is shown in these images 2&3. Also my tablet has a MicroSD card slot and the battery can not be taken out. the regular bootloop picture is image file 1 that is what it looks like when it does its continuous bootloop and P.S. the tablet turns off and on automatically during the bootloop. To try and fix it i have let it do its bootloop for hours on end turn it on and off tried looking for a compatible rom (to no avail) and let the battery completely die that is about it.
parkourgamer said:
Root Status = ROOTED
I cannot boot into recovery mode (but when i try i get this, look in pic 2&3)
Tablet Type = HKC (NOT HTC) p776a
ANDROID Version I think (98% shure) is 4.1.1 beta JB
What happened = A few years ago 2013 i think a got this tablet then i learned about rooting, roms, and such so i spent the next year or two trying to root the tablet. I finally got it rooted with a chinese root program and all was well (i don't remember the name of the program) then there was a update for su and i pressed the twrp/cwm mode on accident (I think I was talking to someone at the time) and now it does what is shown in the image 1 it is on some boot loop. When I try to access the hboot menu it does what is shown in these images 2&3. Also my tablet has a MicroSD card slot and the battery can not be taken out. the regular bootloop picture is image file 1 that is what it looks like when it does its continuous bootloop and P.S. the tablet turns off and on automatically during the bootloop. To try and fix it i have let it do its bootloop for hours on end turn it on and off tried looking for a compatible rom (to no avail) and let the battery completely die that is about it.
Click to expand...
Click to collapse
Okay. Just a few more questions.
Does your tablet boot into recovery (picture 1) even if you try to boot normally? (fastboot maybe)
Can you boot into anything else other than recovery? (try different button combinations)
Does ADB recognise your tablet when it's in recovery mode? (if you don't know about this, just post your computer OS and if you have ADB/Fastboot drivers installed on your PC)
If the anwser the the first question is no:
Does ADB recognise the device while it's in the bootloop.
janekmuric said:
Okay. Just a few more questions.
Does your tablet boot into recovery (picture 1) even if you try to boot normally? (fastboot maybe)
Can you boot into anything else other than recovery? (try different button combinations)
Does ADB recognise your tablet when it's in recovery mode? (if you don't know about this, just post your computer OS and if you have ADB/Fastboot drivers installed on your PC)
If the anwser the the first question is no:
Does ADB recognise the device while it's in the bootloop.
Click to expand...
Click to collapse
sorry, i forgot to clarify the hboot. it pops up the "words" or whatever then automatically reboots there is no way to select options or keep the device on so i cant use fastboot unless there is a way i dont know of. P.S. the tablet restarts automatically so it is on for like 25 maybe 30 seconds then shuts off then turns back on and repeats till the battery is dead. My thought originally to fix it was to get a rom put it on the sdcard and see if that works but the manufacture does not supply the rom for my model only the p771a. and the only physical buttons are the home, power, the pinhole reset button, the volume and such buttons are virtual on the screen when it is fully on. And picture 1 i dont fully know what that screen symbol is the hboot one is similar but not that but yes it does but to picture 1 nomadder what i do even if i try to get to hboot menu. Sorry if this is a "little" scattered having explaining it. If it would help i can make a video and rar it and upload it here.
parkourgamer said:
sorry, i forgot to clarify the hboot. it pops up the "words" or whatever then automatically reboots there is no way to select options or keep the device on so i cant use fastboot unless there is a way i dont know of. P.S. the tablet restarts automatically so it is on for like 25 maybe 30 seconds then shuts off then turns back on and repeats till the battery is dead. My thought originally to fix it was to get a rom put it on the sdcard and see if that works but the manufacture does not supply the rom for my model only the p771a. and the only physical buttons are the home, power, the pinhole reset button, the volume and such buttons are virtual on the screen when it is fully on. And picture 1 i dont fully know what that screen symbol is the hboot one is similar but not that but yes it does but to picture 1 nomadder what i do even if i try to get to hboot menu. Sorry if this is a "little" scattered having explaining it. If it would help i can make a video and rar it and upload it here.
Click to expand...
Click to collapse
here is the video
parkourgamer said:
sorry, i forgot to clarify the hboot. it pops up the "words" or whatever then automatically reboots there is no way to select options or keep the device on so i cant use fastboot unless there is a way i dont know of. P.S. the tablet restarts automatically so it is on for like 25 maybe 30 seconds then shuts off then turns back on and repeats till the battery is dead. My thought originally to fix it was to get a rom put it on the sdcard and see if that works but the manufacture does not supply the rom for my model only the p771a. and the only physical buttons are the home, power, the pinhole reset button, the volume and such buttons are virtual on the screen when it is fully on. And picture 1 i dont fully know what that screen symbol is the hboot one is similar but not that but yes it does but to picture 1 nomadder what i do even if i try to get to hboot menu. Sorry if this is a "little" scattered having explaining it. If it would help i can make a video and rar it and upload it here.
Click to expand...
Click to collapse
1. Download fixcache.bat.zip on your computer. Extract cachefix.bat from the file.
2. Run it. It should say just "Waiting for device..."
3. Now reset your tablet with the reset button and QUICKLY plug it into the computer and wait a few minutes.
Now try to get to that text in picture 1 and tell me what happends.
Also post the text you see on the computer from the file I sent you.
Tell me if
janekmuric said:
1. Download fixcache.bat.zip on your computer. Extract cachefix.bat from the file.
2. Run it. It should say just "Waiting for device..."
3. Now reset your tablet with the reset button and QUICKLY plug it into the computer and wait a few minutes.
Now try to get to that text in picture 1 and tell me what happends.
Also post the text you see on the computer from the file I sent you.
Tell me if
Click to expand...
Click to collapse
this is what happens to the .bat fikle when i open it
parkourgamer said:
this is what happens to the .bat fikle when i open it
Click to expand...
Click to collapse
also would there be any way to pop the hood and flip a switch to reset it like on a pc tower?
parkourgamer said:
also would there be any way to pop the hood and flip a switch to reset it like on a pc tower?
Click to expand...
Click to collapse
Umm, you said there is a reset button on the tablet so pressing that would probably reset it.
The error you are getting is because adb is not installed on your PC. Use this simple adb installer to instal adb. When installing just press yes to everything. MAKE SURE THE PHONE IS PLUGGED IN THE COMPUTER WHILE INSTALLING AND THAT IT'S ON!
Now run the file again.
If you want you can add me on Skype: janekmuric
---------- Post added at 13:51 ---------- Previous post was at 13:26 ----------
If you want to know what is happening:
You are in what's called a recovery bootloop. It's when you can't get out of the recovery. What is happening in this case is that Superuser app tried to install it's binaries via recovery. Because some people don't know how to install binaries manually, the app puts a file on the cache partition so the recovery automaticly installs the zip upon booting. Now, this would be good so you don't mess up your device, but the zip file it's trying to install is faulty so it just breaks the device.
My attept at fixing this is to delete the /cache/recovery folder so it doesn't just install the file, and instead boots into a working recovery.
janekmuric said:
Umm, you said there is a reset button on the tablet so pressing that would probably reset it.
The error you are getting is because adb is not installed on your PC. Use this simple adb installer to instal adb. When installing just press yes to everything. MAKE SURE THE PHONE IS PLUGGED IN THE COMPUTER WHILE INSTALLING AND THAT IT'S ON!
Now run the file again.
If you want you can add me on Skype: janekmuric
---------- Post added at 13:51 ---------- Previous post was at 13:26 ----------
If you want to know what is happening:
You are in what's called a recovery bootloop. It's when you can't get out of the recovery. What is happening in this case is that Superuser app tried to install it's binaries via recovery. Because some people don't know how to install binaries manually, the app puts a file on the cache partition so the recovery automaticly installs the zip upon booting. Now, this would be good so you don't mess up your device, but the zip file it's trying to install is faulty so it just breaks the device.
My attept at fixing this is to delete the /cache/recovery folder so it doesn't just install the file, and instead boots into a working recovery.
Click to expand...
Click to collapse
That would be great but i cant keep my tablet on for more than like 30 seconds before it auto shuts off and it automatically tries to go into recovery when i add power to the device it wont just boot to the OS
parkourgamer said:
That would be great but i cant keep my tablet on for more than like 30 seconds before it auto shuts off and it automatically tries to go into recovery when i add power to the device it wont just boot to the OS
Click to expand...
Click to collapse
30 seconds is more than enough. Especally with an automated script like the one I sent you.
The first thing we have to do to fix your tablet is to establish a working ADB connection. Use the ADB installer i sent you. And look up on how to install Google USB driver for ADB.
janekmuric said:
30 seconds is more than enough. Especally with an automated script like the one I sent you.
The first thing we have to do to fix your tablet is to establish a working ADB connection. Use the ADB installer i sent you. And look up on how to install Google USB driver for ADB.
Click to expand...
Click to collapse
ok will try
hi
i have a galaxy s6 with completely removed screen but booting normally and need to restore all files so
1/ i can t accees files thru mtp since screen is locked...
2/ usb debug never enabled so no adb
3/ samsung seems to not have fastboot like all phones i tried.... (boring)
4) i tried the download mode with heimdall / odin etc and seems i successfully flashed a twrp but it need a screen to click on menus...
what can i do to get my files.?
is there another recovery for s6 with usb debug enabled just by booting the recovery !?
thanks !
You could try to flash twrp. It has mtp enabled by default
hi
i tried but nothing popup in windows /osx/linux.... odin tell me flash is ok but i m not sure since i see nothing but i hear the connexion sound when rebooting with vol up + power + home button...
hello
so... seems twrp was not booting so i flashed it S6_UniKernel_v8-0002-ODIN.tar and since then seems the phone won t boot anymore, just can go to download mode ... how can i get this damn fastboot or adb working starting from boring download mode on a samsung ?
i can t find a stock kernel to get the device booting normally again ...
ps: my goal is to download sms and photos of the phone don t care of the other files... phone will go to trash after that
smolleyes said:
hello
so... seems twrp was not booting so i flashed it S6_UniKernel_v8-0002-ODIN.tar and since then seems the phone won t boot anymore, just can go to download mode ... how can i get this damn fastboot or adb working starting from boring download mode on a samsung ?
i can t find a stock kernel to get the device booting normally again ...
ps: my goal is to download sms and photos of the phone don t care of the other files... phone will go to trash after that
Click to expand...
Click to collapse
don t really know how i did it lol but i successfully rebooted to recovery after flashing another one thru odin and get adb working ! all my files are saved now
thanks !
smolleyes said:
don t really know how i did it lol but i successfully rebooted to recovery after flashing another one thru odin and get adb working ! all my files are saved now
thanks !
Click to expand...
Click to collapse
Are you able to share what you did in order to get your files? I have a similar situation and need to recover files from a dead S6 of my own.
Thanks in advance
mkvos said:
Are you able to share what you did in order to get your files? I have a similar situation and need to recover files from a dead S6 of my own.
Thanks in advance
Click to expand...
Click to collapse
Yeah i have also the same problem. I was able to flash cwm and twrp also got the right version but cant into recovery mode or adb is not detecting it.
Do i have to release the buttons when the samsung logo appears? Has someone a estimated time how long its take until the logo shows up so i can guess when to release the buttons?
Or did you use another twrp or cwm version?
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
try charging the phone for a few hours
se7enlyn said:
try charging the phone for a few hours
Click to expand...
Click to collapse
yeah, forgot to mention that. can't even charge it. when I plug it in it does the same. tries to turn on. shows the first splash screen and reboots doing the same again and again. doesnt even show the charging screen with chinese text and battery animation.
sounds like u need a new battery
ireaper4592 said:
sounds like u need a new battery
Click to expand...
Click to collapse
already tried that too. had a replacement battery laying around. changed it and still no luck.
@bmark240
help please
se7enlyn said:
@bmark240
help please
Click to expand...
Click to collapse
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
bmark240 said:
Hi.
Firstly, you have recovery installed, so that is good.
Some things for you to try:
Can you hold down the power button for longer than 10 seconds. This will clear temporary memory and hard reboot.Press power button & volume 'down' button until you enter TWRP.
Try this firstly.
Can you access ADB at all?
15 second ADB drivers should work.
What Operating system is on your Computer?
TWRP should pop up & be accessible
If you have Windows 10 on. If it doesn't recognize your phone you will have to run an update for Media Center for Windows 10 (64 bit...I'm assuming its not 32bit).
TWRP should be read by your computer if you can access it as it contains the drivers inbuilt.
If it still is inaccessible you might have to flash TWRP again through fastboot mode using ADB.
Click to expand...
Click to collapse
Yes, I have TWRP installed, but cant access it. Shows the TWRP splash screen and then reboots after like 10 seconds or so.
ADB does not see device. Only shows the device during that 10 second TWRP splash screen time, but even then no commands are effective and it just reboots.
Already tried holding down power button for few seconds. No luck.
I already installed all the possible drivers and media feature packs on my Windows 10. Still no luck.
And yes, I am running latest Windows 10 Pro x64.
And no, since I cant access Fastboot, I can not re-flash TWRP either.
kallum7 said:
hi you need to follow this guide :https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Click to expand...
Click to collapse
Gonna try that right now. Hopefully that will fix it.
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
THEVAN3D said:
Daaaamn I really frankensteined the sh*t out of this one
I tried that Color OS unbrick method but it did not work. I mean the process itself worked, but the phone would not boot past the logo.
So I grabbed the system.img from old CM13 image, grabbed 2016 modem.img, then placed twrp.img instead of CM recovery and pressed START.
AAAAAND IT WORKED!!! The phone is alive!!!
Now I am in TWRP and I'm going to flash a new ROM. Hopefully everything will go perfectly.
Thanks a lot for your help @kallum7
EDIT: Flashed new ROM. Everything went just fine.
Click to expand...
Click to collapse
because i had bricked my phone a few months ago and that is how i got my phone back using the colour os
THEVAN3D said:
Phone memory was almost totally full and my sister was still shooting videos on it.
During one shoot the phone turned off and I can't turn it back on again.
Here is my problem, the phone just doesn't boot.
Shows only first screen with 1+ logo and then reboots. Not even the system boot animation.
When I try to enter recovery mode it shows TWRP screen and then reboots again. So I can't even access recovery.
And when I try to enter Fastboot Mode it turns on but the PC won't see it in adb.
What are my options here?
Click to expand...
Click to collapse
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
FairuzOnn said:
This is Bacon Root Toolkit (BRT) by WugFresh's
install file
https://drive.google.com/file/d/1DdFXrHPhVDlSzPqAk1PVfjK_Q0J_UzxO/view?usp=sharing
If you need stock rom
https://forum.xda-developers.com/oneplus-one/general/official-cm11s-roms-ota-updates-t2906746
If you have any question find me on discord FiveO#8241 I will try help you out
Click to expand...
Click to collapse
Thanks, but I already fixed it.
i had it in the past for some reason too. Managed to fix it using the color os method. Carefully followed the steps until i could flash again. That was a year ago tohugh. There should be some thread around wit some all-in-one solution against bricks.
Hi all,
Im in a desperate and urgent need of help.
My Mrs pixel 7 pro is stuck in a boot loop that restarts 5 seconds after the google writing appears when starting. I wasn't home when it happened but she doesnt really make sure her phone has some battery before turning it on, as soon as she sees 2% she starts it, so im guessing maybe she bricked it while the phone was trying to apply an update when turning it on as she said that the external battery didnt have any juice left inside.
Anyway,
I know i can wipe the phone from recovery mode and make it into a factory reset phone. The issue here is we have over 6000 photos and videos of our son in that phone that she hasnt copied to the external hard drive i gave her for months due to her not liking that her little laptop is slow.
I tried recovery mode Reboot, i tried going into safe mode (no luck as it will go straight into fastboot mode). She doesnt care about a lot of things and obviously she never unlocked the developer setting or bootloader so device state is also locked.
I am begging you, anything any info or advice on how i can get those pictures out of the phone. Is there any way i can flash the stock firmware just to make the phone start and copy them after?
Any possibility or chance or retrieval?
I am willing to pay anyone that can guide me in the right direction as there are over 6 months worth of photos and memories.
Thanks in advance and may the luck be on my side.
andyysk said:
Hi all,
Im in a desperate and urgent need of help.
My Mrs pixel 7 pro is stuck in a boot loop that restarts 5 seconds after the google writing appears when starting. I wasn't home when it happened but she doesnt really make sure her phone has some battery before turning it on, as soon as she sees 2% she starts it, so im guessing maybe she bricked it while the phone was trying to apply an update when turning it on as she said that the external battery didnt have any juice left inside.
Anyway,
I know i can wipe the phone from recovery mode and make it into a factory reset phone. The issue here is we have over 6000 photos and videos of our son in that phone that she hasnt copied to the external hard drive i gave her for months due to her not liking that her little laptop is slow.
I tried recovery mode Reboot, i tried going into safe mode (no luck as it will go straight into fastboot mode). She doesnt care about a lot of things and obviously she never unlocked the developer setting or bootloader so device state is also locked.
I am begging you, anything any info or advice on how i can get those pictures out of the phone. Is there any way i can flash the stock firmware just to make the phone start and copy them after?
Any possibility or chance or retrieval?
I am willing to pay anyone that can guide me in the right direction as there are over 6 months worth of photos and memories.
Thanks in advance and may the luck be on my side.
Click to expand...
Click to collapse
If you can enter recovery mode try to sideload the same exact ota package of the rom she's running, maybe that can help. Good luck!
andyysk said:
Hi all,
Im in a desperate and urgent need of help.
My Mrs pixel 7 pro is stuck in a boot loop that restarts 5 seconds after the google writing appears when starting. I wasn't home when it happened but she doesnt really make sure her phone has some battery before turning it on, as soon as she sees 2% she starts it, so im guessing maybe she bricked it while the phone was trying to apply an update when turning it on as she said that the external battery didnt have any juice left inside.
Anyway,
I know i can wipe the phone from recovery mode and make it into a factory reset phone. The issue here is we have over 6000 photos and videos of our son in that phone that she hasnt copied to the external hard drive i gave her for months due to her not liking that her little laptop is slow.
I tried recovery mode Reboot, i tried going into safe mode (no luck as it will go straight into fastboot mode). She doesnt care about a lot of things and obviously she never unlocked the developer setting or bootloader so device state is also locked.
I am begging you, anything any info or advice on how i can get those pictures out of the phone. Is there any way i can flash the stock firmware just to make the phone start and copy them after?
Any possibility or chance or retrieval?
I am willing to pay anyone that can guide me in the right direction as there are over 6 months worth of photos and memories.
Thanks in advance and may the luck be on my side.
Click to expand...
Click to collapse
As @acuicultor said;
Here's Googles official OTA updates and instructions etc.
From what i've read briefly and as far as i can gather (still running a stock pixel 7 pro - for the first phone in god knows how long, so i'm not well read on this device but...) if you can sideload the latest OTA update via sideload then you should in theory be able to save the data and boot again. But if you flash full firmware then your device will be wiped in the process (if that's even possible with a locked bootloader).
Very best of luck
EDIT: hmm thinking about it, you won't have enabled USB debugging in dev options, hang on, i'll reboot direct to recovery to see if i can get the device recognised without USB debugging enabled. Sorry to be vague (hopefully someone more experienced with this device will chime in with more advice), like i say, i'm not rooted, flashed with custom rom - nothing, just plain old stock so i've not read up much on proceedures for this device. Bare with me!!
Had another thought, do you or have you been using Google photos to view your images on the device. If so, did you enable backup photos online when you first set the app up? If so, they could be backed up automatically...
Edit: my bad..
Try this link
If that fails just Google 'Google photos sign in'
Just tried from recovery to run some adb cmd's, no joy without enabling debugging 1st
There may be hope... If your photos aren't backed online already from above link...
EDIT:
1. From power off state (make sure the device is charged before apply any ota update) Press vol down and power together. As soon as it boots to google logo, let go of vol down, then power. That will put you in fastboot mode where you use the vol up/down to navigate to Recovery mode and power button to select.
2. Then when you have the screen that says 'no command', press power button and CLICK vol up (releasing vol up straight away but keeping power pressed). That'll take you a blue menu at top of screen.
3. Use vol buttons to navigate to 'apply update from adb'. I have checked using 'adb devices' and 'adb reboot sideload' cmd's on PC and the device is now recognised...
Will write further instructions shortly. (no guarantees this will work tho without losing data...or even if it'll work at all - i suspect the OTA update with just fail to transfer)
OR there is another option, using the same instructions above (1) in fastboot mode use the volume buttons to navigate the menu, power button to select Rescue mode. Then contact your service center for support who will advise/offer support - hopefully, which may end up having to send the device in and still offers no guarantee of preserved data
reg66 said:
@acuicultor said;
Here's Googles official OTA updates and instructions etc.
Click to expand...
Click to collapse
Following the link it's all explained there:
- no USB-Debugging needed
- booting recovery by key combo
- no loss of any data when using the OTA files
Also turning on USB-Debugging in developer options is not necessary for the recovery. It's enabled by default and moreover the recovery doesn't consider any system settings like disabled/enabled USB-Debugging.
WoKoschekk said:
Following the link it's all explained there:
- no USB-Debugging needed
- booting recovery by key combo
- no loss of any data when using the OTA files
Also turning on USB-Debugging in developer options is not necessary for the recovery. It's enabled by default and moreover the recovery doesn't consider any system settings like disabled/enabled USB-Debugging.
Click to expand...
Click to collapse
Ahh cool. I obviously didn't read much of it! Dunno what's happened to the chap, maybe his wife has killed him lol
reg66 said:
Ahh cool. I obviously didn't read much of it! Dunno what's happened to the chap, maybe his wife has killed him lol
Click to expand...
Click to collapse
yes, maybe...
FYI: Stock recovery only uses a minimal adbd with a very limited set of commands. That's why some known ADB commands won't work.
minadbd