Touch not responding on flashing other ROM - YU Yuphoria

Hi I am using RR nougat rom in which Touch is working fine but when I flash any Oreo rom touch doesn't works
I have changed display of phone, this might be a reason but how can I get my touch panel working on Oreo rom as it works in recovery n RR rom
Kernel in RR is of kraitor kernel
Pl help me out I want to use Oreo rom
Sent from my Robot 2.O using Tapatalk

akshayvidhate20 said:
Hi I am using RR nougat rom in which Touch is working fine but when I flash any Oreo rom touch doesn't works
I have changed display of phone, this might be a reason but how can I get my touch panel working on Oreo rom as it works in recovery n RR rom
Kernel in RR is of kraitor kernel
Pl help me out I want to use Oreo rom
Click to expand...
Click to collapse
Enter Fastboot mode, flash CWM, it uses volume buttons for navigation and selection, flash a new ROM

rach.it.chan said:
Enter Fastboot mode, flash CWM, it uses volume buttons for navigation and selection, flash a new ROM
Click to expand...
Click to collapse
Touch works in twrp recovery but not in new Oreo rom
Sent from my YU5010 using Tapatalk

akshayvidhate20 said:
Touch works in twrp recovery but not in new Oreo rom
Click to expand...
Click to collapse
Oh, not a Dev bro but sounds like a problem with the kernel or the ROM, better try a different ROM I guess

can't touch anywhere in Oreo rom
I'm also facing this problem....and not found any solution..
...help me guys.....bro if you have found solution of this...plz help me

akshayvidhate20 said:
Hi I am using RR nougat rom in which Touch is working fine but when I flash any Oreo rom touch doesn't works
I have changed display of phone, this might be a reason but how can I get my touch panel working on Oreo rom as it works in recovery n RR rom
Kernel in RR is of kraitor kernel
Pl help me out I want to use Oreo rom
Sent from my Robot 2.O using Tapatalk
Click to expand...
Click to collapse
Same problem bro. I found only one rom that works perfectly (AICP rom) which is 7.1 . If someone has any other rom suggestion or answer to this problem Please help. Thanks in advance.

First you have to flash any CM based ROM ..after that flash any rom you want,the touch will work..
i also face the same problem..it works for me.:good:
---------- Post added at 05:26 PM ---------- Previous post was at 05:09 PM ----------
Goldy10 said:
First you have to flash any CM based ROM ..after that flash any rom (except Oreo) you want,the touch will work..
i also face the same problem..it works for me.:good:
Click to expand...
Click to collapse
:fingers-crossed:

Goldy10 said:
First you have to flash any CM based ROM ..after that flash any rom you want,the touch will work..
i also face the same problem..it works for me.:good:
---------- Post added at 05:26 PM ---------- Previous post was at 05:09 PM ----------
:fingers-crossed:
Click to expand...
Click to collapse
which is CM based rom ?

Related

Ask anything about Xaiomi Mi4i

Feel free and Ask anything about Xaiomi Mi4i! ??
I would like to ask u if u know the spelling of xiaomi
Ya I wrote it by mistake sorry
Rom win 10
I flashed cm13 from this http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-13-t3277419
But when it comes to the Welcome screen, it gets stuck, and then reboots.
Pls help.
SACROS said:
I flashed cm13 from this http://forum.xda-developers.com/mi-4i/development/rom-cyanogenmod-13-t3277419
But when it comes to the Welcome screen, it gets stuck, and then reboots.
Pls help.
Click to expand...
Click to collapse
First you need to revert back to Miui version 6.6.10 or 5.6.11 or 5.7.13 before flashing...
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
dipanjanpanja6 said:
Rom win 10
Click to expand...
Click to collapse
It's up to Xiaomi and Microsoft to decide the fate of Win 10 on our phones. Windows isn't an open source system like Android...
IMEI Partitions on Mi 4i
I would like to know which are the EFS partitions on Mi 4i, the id mmbcsomething19 and all.
I want to know if "Sunlight Display" works in custom ROMs. I'm on CM13.
No sunlight display does not works
Sacros again install mi rom and flash ur rom againto
haikalizz said:
First you need to revert back to Miui version 6.6.10 or 5.6.11 or 5.7.13 before flashing...
---------- Post added at 07:16 PM ---------- Previous post was at 07:15 PM ----------
Click to expand...
Click to collapse
Thanks It worked.
Earlier i flashed miui v7.0.3.0, but it didn't work, but after flashing v6.6.10, it worked nicely. Although i was getting some other problems too, but its now solved.
---------- Post added at 12:35 PM ---------- Previous post was at 12:21 PM ----------
vineetxd said:
Sacros again install mi rom and flash ur rom againto
Click to expand...
Click to collapse
Yeah, as @haikalizz wrote, i flashed miui v 6.6.10 and it worked, thanks
Now on Tap
How can I enable 'Now on Tap' on this rom cm13 ?
When i enable it in google app, it shows 'Unfortunately, Google App has stopped', and then after I hold the home button, it doesn't work.
SACROS said:
How can I enable 'Now on Tap' on this rom cm13 ?
When i enable it in google app, it shows 'Unfortunately, Google App has stopped', and then after I hold the home button, it doesn't work.
Click to expand...
Click to collapse
Choosing the right gapps package is important... Using latest 6.0 ARM64 gapps by OpenGapps works, try using that...
haikalizz said:
Choosing the right gapps package is important... Using latest 6.0 ARM64 gapps by OpenGapps works, try using that...
Click to expand...
Click to collapse
Thanks again!
It worked when i flashed open-gapps-arm64-6.0-mini. But i downloaded aroma and super versions, just to find out 1. aroma gets freeze on TWRP, 2. Mi4i doesn't have much system space for installing the super version. :silly:

Huawei y560-u02 > PussyFap custom rom [port]

PussyFap rom :
http://4pda.ru/forum/index.php?showtopic=682558&view=findpost&p=54641584
i install this rom and one more problem
wifi
also install wifix manager for fix but no change
my device is y560-u02 sc883o
also install omnirom but not installed
thanks bro
javadosyan said:
i install this rom and one more problem
wifi
Click to expand...
Click to collapse
Hi. Try again with wipe: dalvik cahce-data-cache (look first post)
Screenshots:
amiro13 said:
Hi. Try again with wipe: dalvik cahce-data-cache (look first post)
Screenshots:
Click to expand...
Click to collapse
Please help WiFi not working
Not find my wifi
amiro13 said:
Hi to all! Ported custom rom PussyFap for Huawei y560-u02.
Only for Huawei y560-u02 sc7731g/sc8830. This rom, ported by me, a few bugs was fixed by nosatik2015 from russian forum 4pda.ru
Link from 4pda: http://4pda.ru/forum/index.php?s=&showtopic=682558&view=findpost&p=54641584 (russian)
For now don't work only bluetooth and fm-radio. It will fixed soon(nosatik2015)
Link from google drive: https://drive.google.com/file/d/0B1MnFzuGjoAPWWxXUl9lVjhaT0E/view?usp=sharing (english)
Installation:
install twpr 2.8.7.0 via adb : http://forum.xda-developers.com/android/development/recovery-twrp-2-8-5-0-huawei-y560-u02-t3386486
Copy pussyfap zip file to sdcard or to micro sdcard>reboot to recovery>wipe: dalvik cache-data-cache>flash pussyfap zip file via twrp 2.8.7.0>factory reset>reboot system.
On system installed Kingroot. If you wont to use SuperSu, remove Kingroot and flash SuperSu zip file via twrp 2.8.7.0
For gapps: http://opengapps.org/
SuperSu : https://drive.google.com/file/d/0B1MnFzuGjoAPUkJRNnBJTHEzY0U/view?usp=sharing
Do it on your own risk!
In joy!
Click to expand...
Click to collapse
Where is the bluetooth fix ?
Please update your packages
Saber5311 said:
Where is the bluetooth fix ?
Please update your packages
Click to expand...
Click to collapse
for now bluetooth isn't fixed, sorry...
Saber5311 said:
Please help WiFi not working
Not find my wifi
Click to expand...
Click to collapse
try again, wifi works perfectly(look the screenshots)...
amiro13 said:
try again, wifi works perfectly(look the screenshots)...
Click to expand...
Click to collapse
I try but not working
When reboot my phone it connected for 5 second only and when trying to connect not connected
---------- Post added at 05:30 AM ---------- Previous post was at 05:29 AM ----------
amiro13 said:
for now bluetooth isn't fixed, sorry...
Click to expand...
Click to collapse
Can you fix bluetooth ?
please add screen shot from phone about
what's android version?
mo30 said:
please add screen shot from phone about
what's android version?
Click to expand...
Click to collapse
Y560-u02
Saber5311 said:
Y560-u02
Click to expand...
Click to collapse
i said custom rom about screen [emoji1] [emoji4]
i installed it but wifi not working and android was 4.4.2 i looking for a lollipop rom
---------- Post added at 09:48 AM ---------- Previous post was at 09:47 AM ----------
huawei stock rom has better gui from this c rom
mo30 said:
i said custom rom about screen [emoji1] [emoji4]
i installed it but wifi not working and android was 4.4.2 i looking for a lollipop rom
---------- Post added at 09:48 AM ---------- Previous post was at 09:47 AM ----------
huawei stock rom has better gui from this c rom
فرستاده شده از HUAWEI Y560-U02ِ Ù…Ù
Click to expand...
Click to collapse
Can i use pussyfap rom for Y541-U02
Can i use this pussyfap rom for Huawei Y5C Y541-U02.sc 7731g. Kernal 3.10.17
Hey guys it works and wifi,camera,bluetooth is working
Thanks for this ROM
I only wipe data and davlik cache several times
And then flash the zip
Before flash I seen the comments problem Bluetooth is not working so I think if I copied the Bluetooth files from system and extracted the ROM zip and replace Bluetooth files it will work I did this then I compressed the file and I tried to flash it it says error I don't know why I flash the original zip after several wipe and it worked
Any time I charge my phone and it powered off it always bring up white screen plssss helppp
I did not get the Google services or Playstore.
Is there a way to install it?
Managed to find a compatible one.
Done!
wifi not turn on.
Device model Huawei y560 u02.
Please give any solution.

jio problem in yunique

i flashed all variety of roms... Which has VoLte support
but my issue is while calling in jio it become reboot...
and in stock rom,miui rom have headphone problem i mean trying to call in jio the head phone symbol is comes up......so only speak in loudspeaker :crying::crying::crying::crying:
Please help me
shreeak said:
i flashed all variety of roms... Which has VoLte support
but my issue is while calling in jio it become reboot...
and in stock rom,miui rom have headphone problem i mean trying to call in jio the head phone symbol is comes up......so only speak in loudspeaker :crying::crying::crying::crying:
Please help me
Click to expand...
Click to collapse
I think your headphone jack is bricked. It is hardware fault brother. Take your phone to service center or fix it if you can.
There are many roms which supports volte
Stock rom
Miui
Aosp Extended
RR
...
I'm also facing same problem my phone gets reboot while calling in jio via custom ROM
Any solution for this?
shubham04 said:
I'm also facing same problem my phone gets reboot while calling in jio via custom ROM
Any solution for this?
Click to expand...
Click to collapse
Which rom u r using?
Aosp extended im facing this problem on every custom rom i flash
---------- Post added at 06:09 PM ---------- Previous post was at 06:02 PM ----------
Jst give me some solution fr this problem
shubham04 said:
Aosp extended im facing this problem on every custom rom i flash
---------- Post added at 06:09 PM ---------- Previous post was at 06:02 PM ----------
Jst give me some solution fr this problem
Click to expand...
Click to collapse
I am currently on miui 7 volte is working perfectly.
Reinstall Aosp extended
Wipe Data,Dalvik, Cache, Internal Storage, System
Install Mini Dynamic Gapps
Wipe Dalvik, Cache
Install Caesium/Phantom Kernel
Again Wipe Dalvik, Cache
Reboot
After phone boots up
Use jio Sim on 1st slot
Enable Enhanced Voice on LTE
Done
I hav tried this method for so many times but no use
Bt i use pico gapps
Im using jio on slot 1 & my enhanced volte is also enabled
I have also tried both kernel but no use
---------- Post added at 09:46 AM ---------- Previous post was at 09:42 AM ----------
If i downgrade to my stock rom den i will have problems for my phone?
shubham04 said:
I hav tried this method for so many times but no use
Bt i use pico gapps
Im using jio on slot 1 & my enhanced volte is also enabled
I have also tried both kernel but no use
---------- Post added at 09:46 AM ---------- Previous post was at 09:42 AM ----------
If i downgrade to my stock rom den i will have problems for my phone?
Click to expand...
Click to collapse
Install the Modem at last, with any Nougat VoLTE enabled ROM.
https://www.androidfilehost.com/?fid=457084094631641756
I tried that modem bt still no use of that volte modem
shubham04 said:
I tried that modem bt still no use of that volte modem
Click to expand...
Click to collapse
I'm using it right now and everyone who tried was capable to use the VoLTE function so if you're facing any the problem maybe you are not using a VoLTE enabled N ROM.
Aosp is volte enabled N rom
debaadak said:
I'm using it right now and everyone who tried was capable to use the VoLTE function so if you're facing any the problem maybe you are not using a VoLTE enabled N ROM.
Click to expand...
Click to collapse
Im using aosp extended which is volte enabled rom
shubham04 said:
Im using aosp extended which is volte enabled rom
Click to expand...
Click to collapse
Yes it is, sorry but I don't know what is the problem with your phone, everyone is using it and it is working very well.
shubham04 said:
I hav tried this method for so many times but no use
Bt i use pico gapps
Im using jio on slot 1 & my enhanced volte is also enabled
I have also tried both kernel but no use
---------- Post added at 09:46 AM ---------- Previous post was at 09:42 AM ----------
If i downgrade to my stock rom den i will have problems for my phone?
Click to expand...
Click to collapse
Nope
shreeak said:
i flashed all variety of roms... Which has VoLte support
but my issue is while calling in jio it become reboot...
and in stock rom,miui rom have headphone problem i mean trying to call in jio the head phone symbol is comes up......so only speak in loudspeaker :crying::crying::crying::crying:
Please help me
Click to expand...
Click to collapse
got amy solution for this? i m having same problem
Flash stock ROM again using ets tool
Version 1
(Don't unlock boot loader or install twrp)
After that make a stable Internet connection
Install OTA updates of Voice of LTE
Check Jio calling problem should be resolved.
Now unlock boot loader and install TWRP
Take backup of stock ROM
Install any volte enabled ROM
Enjoy

[TWRP] MI A2 dual camera flashable zip

Hello all! I want to share twrp flashable zip with mi a2 stock camera (and it looks the same with RN5 camera). It is based on this magisk module but can be installed through twrp recovery. I also changed device_features and enabled all camera features (if I miss something, please tell me). I tested it on latest official lineage os and it seems to be working fine. If anybody can test it on pie rom, please tell me the results.
can i use this on miui 9.6.3.0?
AlexanderKgr said:
can i use this on miui 9.6.3.0?
Click to expand...
Click to collapse
Did not tested. Please make twrp backup before flashing it
AlexanderKgr said:
can i use this on miui 9.6.3.0?
Click to expand...
Click to collapse
Worked?
MexiDroid said:
Worked?
Click to expand...
Click to collapse
Did not try it
Sent from my Redmi Note 5 using Tapatalk
[email protected] said:
Hello all! I want to share twrp flashable zip with mi a2 stock camera (and it looks the same with RN5 camera). It is based on this magisk module but can be installed through twrp recovery. I also changed device_features and enabled all camera features (if I miss something, please tell me). I tested it on latest official lineage os and it seems to be working fine. If anybody can test it on pie rom, please tell me the results.
Click to expand...
Click to collapse
Thanks for Mi A2 CAM , it work on Pie.
Now test all features and report you if work all.
Thanks again....:victory:
support miui 10?
daniel84cs said:
Thanks for Mi A2 CAM , it work on Pie.
Now test all features and report you if work all.
Thanks again....:victory:
Click to expand...
Click to collapse
Are you using Pixel Experience ROM?
Any issues so far?
iZephiel said:
Are you using Pixel Experience ROM?
Any issues so far?
Click to expand...
Click to collapse
Pixel experence have it inbuilt , tested it in AOSP Pie , same base without gapps.
Miui 10 working litte bug. push camera settings icon and camera has stopped :/
perfect for me MIUI 10 Global. Better than GCam... Just is possible italian language? Thank you so much.
---------- Post added at 10:28 PM ---------- Previous post was at 10:23 PM ----------
Can instal with magisk?
mariopalermo said:
perfect for me MIUI 10 Global. Better than GCam... Just is possible italian language? Thank you so much.
---------- Post added at 10:28 PM ---------- Previous post was at 10:23 PM ----------
Click to expand...
Click to collapse
Better quality than stock camera.
mesu settings crash camera.
MIUI global 10.0.4.0
Hey wow you're a savior! It worked on my Redmi S2 with Pixel Experience Pie ROM. At first it didn't work because I just simply flashed it. After a factory reset, it already worked. Thank you!
After so many failures (51 times) installing mi a2 camera on my rooted redmi 4a, via Magisk Module nor flashable via TWRP
Finnaly it works best after i flashed from this thread
im on AEX 5.8 OREO
THANK YOU FOR SHARING
not working

mix 2s Chinese version flash to Global International ROM?

Is it possible ??
I have my Chinese version unlocked, and flashed with twrp. However, when I flashed the global stable or global developer rom, for stable rom, it doesn't boot, for developer rom, the screen flashes.
Anyone success it flashing to Global stable or Global developer rom ????
If you do, any tricks ? and does Gpay work in Global stable or Global devloper rom in Chinese version ??? Do I need to lock the bootloader again after flashing to Global stable/developer ROM ????
Thanks !!!!
htcandroid said:
Is it possible ??
I have my Chinese version unlocked, and flashed with twrp. However, when I flashed the global stable or global developer rom, for stable rom, it doesn't boot, for developer rom, the screen flashes.
Anyone success it flashing to Global stable or Global developer rom ????
If you do, any tricks ? and does Gpay work in Global stable or Global devloper rom in Chinese version ??? Do I need to lock the bootloader again after flashing to Global stable/developer ROM ????
Thanks !!!!
Click to expand...
Click to collapse
Hello. I have a Chinese model (xe). I flashed the global rom develop thanks to miflash. with twrp I always had a bootloop at startup. especially do not re-lock the bootloader, otherwise risk of brick. gpay works on mine, I did not have any problems.
Del
meuhmeuh51 said:
Hello. I have a Chinese model (xe). I flashed the global rom develop thanks to miflash. with twrp I always had a bootloop at startup. especially do not re-lock the bootloader, otherwise risk of brick. gpay works on mine, I did not have any problems.
Click to expand...
Click to collapse
What is the version of your mi flash ? And do u need magisk for gpay to work ?
htcandroid said:
What is the version of your mi flash ? And do u need magisk for gpay to work ?
Click to expand...
Click to collapse
my version is (v2018.5.28.0), but maybe a newer version exists. gpay works on my mimix2s without Magic
meuhmeuh51 said:
my version is (v2018.5.28.0), but maybe a newer version exists. gpay works on my mimix2s without Magic
Click to expand...
Click to collapse
It's interesting to know that you don't need magisk to use gpay. I have to install it get gpay work.
If you are XE model(usually Chinese version is XE),flash this before you flash rom.
https://mega.nz/#!YZthmIKQ!oJqoszSXRl6LWbzj1OhFfpu_sV_z3t0lU8pbDvgu4Ro
ryu72 said:
If you are XE model(usually Chinese version is XE),flash this before you flash rom.
https://mega.nz/#!YZthmIKQ!oJqoszSXRl6LWbzj1OhFfpu_sV_z3t0lU8pbDvgu4Ro
Click to expand...
Click to collapse
Thanks, but do you mean flash this before I flash the ROM or flash this before I flash Magisk ????
Thank you !
htcandroid said:
Thanks, but do you mean flash this before I flash the ROM or flash this before I flash Magisk ????
Thank you !
Click to expand...
Click to collapse
先刷我给你发的这个包,然后刷ROM,最后刷Magisk就完事了。你刷国际版失败是因为国际版的model跟中国的不一样,我给你发的这个包就是把你的设备从XE改成XS(好像是XS)。
本来是要通过fastboot来改build.prop的很麻烦,但是有人做了这么个包,很好用。
---------- Post added at 03:52 AM ---------- Previous post was at 03:45 AM ----------
If you are not Chinese can't read that→Flash this zip first then flash the rom and magisk. don't change the step.
ryu72 said:
先刷我给你发的这个包,然后刷ROM,最后刷Magisk就完事了。你刷国际版失败是因为国际版的model跟中国的不一样,我给你发的这个包就是把你的设备从XE改成XS(好像是XS)。
本来是要通过fastboot来改build.prop的很麻烦,但是有人做了这么个包,很好用。
---------- Post added at 03:52 AM ---------- Previous post was at 03:45 AM ----------
If you are not Chinese can't read that→Flash this zip first then flash the rom and magisk. don't change the step.
Click to expand...
Click to collapse
Yes, I read Chinese, Thank you.
But , if I stall this and then then the ROM, will this file be deleted after flashing the ROM ?????
ryu72 said:
先刷我给你发的这个包,然后刷ROM,最后刷Magisk就完事了。你刷国际版失败是因为国际版的model跟中国的不一样,我给你发的这个包就是把你的设备从XE改成XS(好像是XS)。
本来是要通过fastboot来改build.prop的很麻烦,但是有人做了这么个包,很好用。
---------- Post added at 03:52 AM ---------- Previous post was at 03:45 AM ----------
If you are not Chinese can't read that→Flash this zip first then flash the rom and magisk. don't change the step.
Click to expand...
Click to collapse
and use TWRP to flash this zip first and then flash the ROM using MiFlash ?????
cant reply by system Error
---------- Post added at 09:33 AM ---------- Previous post was at 09:31 AM ----------
htcandroid said:
and use TWRP to flash this zip first and then flash the ROM using MiFlash ?????
Click to expand...
Click to collapse
meuhmeuh51 said:
my version is (v2018.5.28.0), but maybe a newer version exists. gpay works on my mimix2s without Magic
Click to expand...
Click to collapse
Is your mix2s a XE one ?what is the version of your ROM?stable or global ?for local or fastboot ?
ryu72 said:
cant reply by system Error
---------- Post added at 09:33 AM ---------- Previous post was at 09:31 AM ----------
Click to expand...
Click to collapse
先wipe然后刷rom再刷magisk enable 再刷magisk
htcandroid said:
Is your mix2s a XE one ?what is the version of your ROM?stable or global ?for local or fastboot ?
Click to expand...
Click to collapse
mi mix2s XE. miui 18.12.7 global developper

Categories

Resources