My Fire stick had been working for the last year, but recently it's been acting up, and whatever HDMI port I put it in it says 'No Signal'. Any ideas on how to get it to work again?
Ariri said:
My Fire stick had been working for the last year, but recently it's been acting up, and whatever HDMI port I put it in it says 'No Signal'. Any ideas on how to get it to work again?
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/fire-tv
With that stated...
The following threads might be helpful for what you need. I'm not sure which one applies to your device so i had provided all of the possible options. Don't be afraid to ask for some member guidance within one of them.
https://forum.xda-developers.com/showthread.php?t=3521806
https://forum.xda-developers.com/showthread.php?t=2882337
https://forum.xda-developers.com/showthread.php?t=3309783
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Related
This is for those who has experienced the issue of having their Amazfit Bip watch not turning on after FW update. If you found any solution or a way to do a hard reset on the device, please share here. As for it's big brother, the Amazfit Pace, there is a way to enter bootloader by holding the hardware button while it's connected to the charger. I was hoping there is a way of doing it to the Bip as well. Sadly, the Bip cannot be connected to a computer to access its internals like it's big bro.
lawrnz said:
This is for those who has experienced the issue of having their Amazfit Bip watch not turning on after FW update. If you found any solution or a way to do a hard reset on the device, please share here. As for it's big brother, the Amazfit Pace, there is a way to enter bootloader by holding the hardware button while it's connected to the charger. I was hoping there is a way of doing it to the Bip as well. Sadly, the Bip cannot be connected to a computer to access its internals like it's big bro.
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/smartwatch/amazfit
With that stated...
Your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3746967
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/smartwatch/amazfit
With that stated...
Your best bet is to post this question within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3746967
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Got it! Thanks!
Hey all,
I recently got my hands on a kindle fire HD 3rd gen tablet and wanted to root it because the amazon OS is terrible. unfortunately i could not find any guides on how to root this specific tablet (i tried rooting my first kindle fire but TWRP didn't install correctly and it is now bricked.) I want to be careful rooting the tablet this time around so any suggestions on where to get started would be greatly appreciated! right now i cannot seem to get it recognized by my pc, i am not sure if it is a cable problem in not but it shows up as unknown device in my device manager tab. I am a newcomer to rooting so again any suggestions would be great. Thanks!
NonX_ said:
Hey all, I recently got my hands on a kindle fire HD 3rd gen tablet and wanted to root it because the amazon OS is terrible...
Click to expand...
Click to collapse
I don't have this device but, the following area of the forum is specific to your device.
https://forum.xda-developers.com/kindle-fire-hd
With that stated...
Your best bet is to ask for some member guidance within the following Q&A thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3206681
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Thanks!
Thanks so much for replying so fast! it looks like i am going to have to buy a fastboot cable. i see a couple of them on amazon and as a new user i cannot post links, but i think the cable will work.
Thanks again!
NonX_ said:
Thanks so much for replying so fast! it looks like i am going to have to buy a fastboot cable. i see a couple of them on amazon and as a new user i cannot post links, but i think the cable will work. Thanks again!
Click to expand...
Click to collapse
If you have any further questions as well as ones regarding the cable then you should post it within the second Q&A thread link for feedback and guidance from a member who has or has knowledge of your specific device.
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
On an odd ball device Asus Zenpad Z10 with ATH-WS660 Bluetooth, in case anyone wanted to know
Is there any way to turn off this godawful aptx codec? I thought it was supposed to make things sound better but instead it sounds like poop. Identocal headphones sound like crap on the tablet with aptx while the tablet without sounds great.
I checked in developer options but the menu isn't there (like many Roms)
If anyone can help me figure it out it would be appreciated.
SyCoREAPER said:
On an odd ball device Asus Zenpad Z10 with ATH-WS660 Bluetooth, in case anyone wanted to know....
Click to expand...
Click to collapse
I don't have this device but, you may be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3494106
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device but, you may be able to obtain some member guidance within the following thread that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3494106
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thanks but thread is a mess that's why I skipped it
Hello,
I was tempted by the Gome K1 for my son and received the phone today. Apparently I am unlucky and the screen is very unresponsive and the phone is so unusable.
I removed the screen protection film as it could be the culprit. Now I try to find how to start the factory reset in order to wipe it clean and try again before sending emails to the shop support...
Do someone happen to have the procedure to start the factory reset for that phone ?
I tried the usual combinaison of button, but it doesn't work.
And by the way, I could not set the correct language and once the phone picked up an exotic language, the list narrowed down ...
Many thanks
Belsteak said:
Hello, I was tempted by the Gome K1 for my son and received the phone today. Apparently I am unlucky and the screen is very unresponsive and the phone is so unusable.....
Click to expand...
Click to collapse
I don't have this device and there's very little on the thread for your device as well but, I did locate one thread where you may be able to obtain some member guidance that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3782427
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Ibuprophen said:
I don't have this device and there's very little on the thread for your device as well but, I did locate one thread where you may be able to obtain some member guidance that's specific to your device.
https://forum.xda-developers.com/showthread.php?t=3782427
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.
Click to expand...
Click to collapse
Thank you, I saw that post also, but as I just received the phone, I don't want to use the whole flash tool as if the phone is really defect and not the program, I will loose the waranty. I want try the hardreset that will bring the phone back to it's status before I opened it. If that doesn't work, then I will send it back.
Thanks anyway.
got the same problem...
on my wife's new one....irresponsive and could not even do the initial android setup....
after charging an doing an hard reset it started to work fine!
rob
As the above title says in looking for a way to get my uk fire hd 10 into show mode, I've had a quick search around but was unable to find an answer other than that I don't need the dock, so I was wondering if anyone knew of a way to get into show mode without waiting months for Amazon to migrate it to the uk.
Many thanks in advance.
Paul
paul0909 said:
As the above title says in looking for a way to get my uk fire hd 10 into show mode,.....
Click to expand...
Click to collapse
I don't have this device but, your best bet is to post this question within the following Q&A thread that's specific to your device and variants.
https://forum.xda-developers.com/showthread.php?t=3636916
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT provide support via PM unless asked/requested by myself. PLEASE keep it in the threads where everyone can share.