Just FYI, it appears with the new Blv3 firmwares, the device will only accept official firmware. Meaning, no more flashing U1 firmware on the carrier models, or vice versa. No more flashing U or U1 firmware to the Canadian W models. Flashing between carrier firmwares is fine as long as it's on a carrier branded device (running TMB on a VZW device, etc). But running 950U firmware on a 950U1 will result in a brick, that is this far unrecoverable.
If your currently are running U1 firmware on a U device, vice versa, or running W firmware on a U or U1 device, or vice versa, you need to flash back to the firmware version that shipped with your device BEFORE you accept any OTAs that take you up to Blv3. Currently the S series is still on BlV2, but may go to Blv3 like the Note series just did.
This has been tested and confirmed.
Credit goes to @me2151, @FatalONEM8 for discovering this and warning people. I didn't find the issue or test, it just passing on the info to hopefully save some bricks.
Update from @mweinbach:
"EDIT: After being tested by XDA Senior member me2151, it turns out cross region flashing does work. Prince Comsy Odin is working, but we can not test if the factory binary flashing will hard brick your phone. So flashing US unlocked onto a US carrier device should work."
To expand a bit on what @mweinbach*just said, @me2151*did some more testing, and he was able to successfully carrier switch from a 950U to 950W using Comsey ODIN. So it looks like Comsey ODIN is not patched as we originally thought. Not sure exactly what caused the tester's phone to brick, but it HARD BRICKED and had to be RMA'd at his expense. So we jumped on the forums here to warn others until more testing could be done. @mweinbach*wrote the article and @xdanilvaand I began posting here.*
We may have overreacted, but wanted to err on the side of caution to protect people from hard bricks.*
The Blv3 factory binary has not been tested, so still unsure if/how we will be able to use it, or if it will cause issues.*
For now, carry on as usual, but understand we still don't know the full implications of the Blv3 patches. One person has already HARD BRICKED, and @me2151*almost hard bricked testing all of this for us.
There is currently a group working on a fix for bricked devices, but for now consider it a hard brick. Don't chance it.
Is Oreo for the S8/S8+ a Blv3 firmware or is it BLV2?
just curious as I flashed my Verizon branded GS8 to U1 firmware to take the Oreo beta..
So If I own a Sm-G950U1 but I have been running G950U Tmobile Oreo beta and upgrade to the stable oreo I'll brick my phone? In order to prevent this I'll have to first go back to G950U1 on nouget and then go up to oreo?
I don't really want to do this because I am loving using the T-Mobile variant because it gives me multiuser (digits) since it's built in.
Does the same apply to exynos devoces?
As far as I know, if you are on the Oreo beta, at least on the Snapdragon US variant, you are still on v2 (the number after the U in the build number is the bootloader version). Do not accept any OTAs and only update if you are completely certain you want to be stuck.
ironbesterer said:
As far as I know, if you are on the Oreo beta, at least on the Snapdragon US variant, you are still on v2 (the number after the U in the build number is the bootloader version). Do not accept any OTAs and only update if you are completely certain you want to be stuck.
Click to expand...
Click to collapse
Does this mean that we can update to a build with Bootloader v3, but don't expect to be able to change carriers afterwards? For example, I switched my S8 from ATT to XAA to get rid of the bloat. Should I restore to ATT on Nougat or can I stay on Oreo beta on the unlocked U1 firmware?
vimerate said:
Does this mean that we can update to a build with Bootloader v3, but don't expect to be able to change carriers afterwards? For example, I switched my S8 from ATT to XAA to get rid of the bloat. Should I restore to ATT on Nougat or can I stay on Oreo beta on the unlocked U1 firmware?
Click to expand...
Click to collapse
You can stay on the unlocked firmware for now, but once you switch to one of the carrier firmwares with v3, you cannot go back to anything other than a carrier firmware with v3. You should be ok for now, but just be sure that the next time you update that it is not on v3 or you'll be stuck permanently or until a fix is found.
ironbesterer said:
You can stay on the unlocked firmware for now, but once you switch to one of the carrier firmwares with v3, you cannot go back to anything other than a carrier firmware with v3. You should be ok for now, but just be sure that the next time you update that it is not on v3 or you'll be stuck permanently or until a fix is found.
Click to expand...
Click to collapse
My question is I have an ATT unlocked device on Cricket Wireless running the oreo beta since I flashed it to unlocked firmware. Should I revert back to Nougat before the final oreo build or just stick with it?
Mr. Orange 645 said:
If your currently are running U1 firmware on a U device, vice versa, or running W firmware on a U or U1 device, or vice versa, you need to flash back to the firmware version that shipped with your device BEFORE you accept any OTAs that take you up to Blv3.
Click to expand...
Click to collapse
So what you're saying is, I'm running U1 on my Note8, if I take an OTA with BL3, it will brick?
raduque said:
So what you're saying is, I'm running U1 on my Note8, if I take an OTA with BL3, it will brick?
Click to expand...
Click to collapse
Yes I believe so. We are still looking into it. It may just be flashing with Comsey ODIN does it.
Mr. Orange 645 said:
Yes I believe so. We are still looking into it. It may just be flashing with Comsey ODIN does it.
Click to expand...
Click to collapse
Honestly, I think that the latter is what does it. Are y'all flashing from a fully OTA'd BLv3 Carrier FW to the BLv2 U1 FW using Comsey?
There isn't a U1 FW with BLv3 yet, right?
raduque said:
Honestly, I think that the latter is what does it. Are y'all flashing from a fully OTA'd BLv3 Carrier FW to the BLv2 U1 FW using Comsey?
There isn't a U1 FW with BLv3 yet, right?
Click to expand...
Click to collapse
There is not.
And I haven't personally tested it, but Comsey is required to flash U1, so we know it will brick the phone once it does reach Blv3.
Mr. Orange 645 said:
There is not.
And I haven't personally tested it, but Comsey is required to flash U1, so we know it will brick the phone once it does reach Blv3.
Click to expand...
Click to collapse
So somebody flashed a full Odin U/carrier FW onto an actual U1 device and it bricked?
raduque said:
So somebody flashed a full Odin U/carrier FW onto an actual U1 device and it bricked?
Click to expand...
Click to collapse
No on a U1. They tried to carrier switch on either a U or a W.
Ok... so they tried to go from a device running a Carrier fw on blv3 to... what? A carrier fw on blv2?
I know this is still early, but the more questions and answers I see, the more confused I am.
Do we know if all of these scenarios will have the same result?
a) I have a AT&T (950U) branded device. I flashed it to become unlocked software (950U1). The device currently updates OTA with unlocked updates. A BLv3 OTA will brick the device. True/false/not yet known?
b) I have a AT&T (950U) branded device. I flashed it to become unlocked software (950U1). The device currently updates OTA with unlocked updates. Assuming a) is FALSE. Device will operate as normal U1 phone, but I will never be able to put 950U carrier branded software on it (via modded Prince Comsy), because that will brick it. True/false/not yet known?
c) I have a AT&T (950U) branded device. I flashed it to become TMobile (950U) device. It now get updates via Tmobile. Future OTAs will continue as normal and I can even use Odin to flash other carrier software (950U), but I can NEVER use modded Odin to flash unlocked software (950U1)? True/false/not yet known.
Based on what I've read right so far. It seems that the answers all remain theoretical, thus not yet known, but based on the Note8 update, the answers would be a) False. b) True. c) True.
Am I far off base???
The thing right now that I understand the least is the scenario a). I don't understand why if I have a phone that was 950U but is now 950U1, why it would get bricked. I do understand that attempts to change it once BLv3 hit are currently DOA, but that's different than simply keeping your phone in the stream that it is currently.
There are some good questions in this thread, I realize that its an evolving situation... So I have to ask directly... I have a Verizon branded 950U that I followed https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817 to switch to XAA and flash the U1 firmware, and I have taken part in the Oreo beta.
Currently my phone has Baseband Version G950U1UEU2ZRA8. There is an OTA update pending right now that is G950U1EUE2ZRAE/G950U1OYM2ZRAE/G950U1UEU2ZRAE. From what I understand, and what I am reading about this BLV2 vs BLV3 issue, based on the numbers in this, if I take this update, I'll still be BlV2, and be ok? If I should want to return to stock Verizon firmware, I can still do it safely?
What I am unsure of is.. If the phone gets updated to BLV3 while I have the XAA/U1 setup on my Verizon branded 950U phone, will I still be able to flash back to stock Verizon, then just not change to anything else? or once I get on BLV3 I am stuck with whatever firmware I have on the phone? Or is that part still unknown for sure?
KidJoe said:
What I am unsure of is.. If the phone gets updated to BLV3 while I have the XAA/U1 setup on my Verizon branded 950U phone, will I still be able to flash back to stock Verizon, then just not change to anything else? or once I get on BLV3 I am stuck with whatever firmware I have on the phone? Or is that part still unknown for sure?
Click to expand...
Click to collapse
I am basically the same as you except AT&T beginning rather than Verizon. I currently have the ZRAE Oreo beta software running on my phone. Based on everything said so far, there is no danger yet in downloading that OTA because it is still BLv2. The danger would be if the final Oreo version drops with BLv3 and you apply it. Then we're left with these different scenarios that are still being figured out.
Absent any concrete info, I'm going to just avoid the Jan security patch on my Note8.
If I have to flash back the Verizon software to have a non-brick device, well I'll just sell this thing and buy a cheap unlocked phone with microsd, wireless charging and a nice screen.
Related
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
theevilpotato said:
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
Click to expand...
Click to collapse
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
dylanneve1 said:
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
Click to expand...
Click to collapse
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
SM-G930P
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Barniedjfuze said:
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Click to expand...
Click to collapse
Yes it will, i am in belize with the U firmware and hotspot works great.
i was not able to to flash u firmware of s7 in sprint model g930p can any one help?
i use odin, u firmware of os 7 ,from sammobile,,, using odin i flash it ,, can any one help
pls help
SM-G930P converted to SM-G930U
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?
Barniedjfuze said:
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?
Click to expand...
Click to collapse
Did you flash all file in the SM-G930U folder (AP,BL,CSC,CP)? Because i did it with T-mobile,Verzion an it work fine
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Barniedjfuze said:
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Click to expand...
Click to collapse
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
CSC flashing
ZaKaRia OuH said:
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
Click to expand...
Click to collapse
Hey Buddy. I would recommend doing a full back up on your phone., using Smart Switch app
It saves all your numbers, message, etc..
Then proceed to flash the latest firmware for the Region or Provider. Using (CSC) not (home_csc) which means flashing the csc will wipe your phone data. Phone will be like new again. Proceed tru set up. Loggin in gmail. Proceed to update smart switch app if not found in apps. Then restore from the back up file. And good to go.
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
highhacker said:
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
Click to expand...
Click to collapse
He said all S7's in the USA are the same, which is correct. Exynos/930F isn't sold in the US, only way to get one is to grey import.
You can flash any USA model's firmware onto any other USA model because they're all the same hardware.
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
killerherts said:
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
Click to expand...
Click to collapse
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
quasihellfish said:
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
Click to expand...
Click to collapse
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Removed
killerherts said:
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Click to expand...
Click to collapse
Blame Sprint; there is really no reason for them to do what they did except keep users from switching their phone to another carrier. This isn't a Samsung thing. I don't believe you would be able to do this with any other Android phone, either (i.e. go backwards in bootloader versions).
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
joe3681 said:
As of this writing (11/29/2017) this is the latest firmware for the G950U1 att unlocked S8 . I'm leaving this here for reference so people can return to it if/when they need it.
Download, extract, remove .md5 file name off the end of each file, flash.
G950U1UEU2AQK2 (This WILL update your bootloader so after this, no going to QH3 or before. Not that you'd have a reason to)
https://drive.google.com/open?id=1gvQ0kaZTwbEYe2jvuIa05pCvwkS4ddtg
Click to expand...
Click to collapse
you donnt need to remove the .md5
you will need modded odin though.
mweinbach said:
you donnt need to remove the .md5
you will need modded odin though.
Click to expand...
Click to collapse
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Thanks Joe I was tired of returning all the way back to the beginning and getting all those new updates on my unlocked S8
joe3681 said:
You don't need to no, but it speeds up the process. I'm just posting firmware not making a hand holding tutorial. There's enough of those around
Click to expand...
Click to collapse
Yeah and on a Mac you do need to, or it freezes Odin completely
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
this.guy.lol said:
If I flash unbranded FW on a carrier specific device, loke tmo or att for example, would it sim unlock the phone?
If I flash tmo FW on an att s8 would it in turn allow me to use the att original device on tmo? I ask these questions because I feel like it would work for both my questions since flashing the FW flashes both boot, kernel and baseband/radio. The which is needed for signal. Just some theories but would love to know the answers.
Btw, I have a F model S8+ and was planning on buying some US branded devices so I was curious.
Click to expand...
Click to collapse
No, it will not unlock the phone (Note: Verizon phones are factory unlocked and remain that way after a firmware flash)
Yes, you can flash any carriers FW to a US S8 and use it with a different carrier.
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Deleted
this.guy.lol said:
So I understand, your saying if I flash att FW to a T-Mobile s8 I can use it on tmobile? If that is the case, to me that's an unlock of sorts tiny book lol. Just wanna make sure is all
Click to expand...
Click to collapse
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
joe3681 said:
You can flash att firmware and use it on TMobile but it will still be locked to TMobile. Just running att firmware.
Click to expand...
Click to collapse
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
this.guy.lol said:
Just realized the typo.....what I meant was, if I flash ATT on a TMO variant I can use ATT while locked to tmo? I'm very unfimiar with combination fw and always opted for the UK models for alot of reasons. Sorry for the confusion of my op question. I know on the s7 and edge if you flashed the US unlocked firmware it not only removed AOL bloat but it unlocked the device. So that is why I ask.
Click to expand...
Click to collapse
I had a TMobile S7 edge and flashing unlocked firmware never unlocked the device. That's handled by TMobile servers so...
Flashing unlocked firmware will give you just that. The smoother, bloat free firmware from another device but not the actual sim unlock.
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
maquino1985 said:
I bought an unlocked device and wanted wifi calling so I flashed the g950usqs1aqf7 att firmware with Odin and it worked to enable wifi calling but I'm unable to get any ota updates and I hate the bloat. Is it possible to get WiFi calling with an unlocked firmware like this one? Also what is the difference between the U and U1 firmware variants?
Click to expand...
Click to collapse
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
twizt3d said:
There are plenty of threads on this, but I don't think anyone was ever successful. I flashed att Oreo to my u1 and got the options, but can't get my company to change my imei back.... My personal phone sim works fine. Quit at that point since it's an Ims registration error. You can try merging the wifi calling apks, but I'm pretty sure it's baked pretty deep in the os. The Verizon guys got some of it working. You can try their threads and see if any of it applies to us.
Click to expand...
Click to collapse
Thanks. Some threads made it sound possible but inconclusive. I'll just assume it doesn't work.
BTW, can you link to the att oreo fw? And what do u flash that with Odin or comsey?
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
twizt3d said:
The thread right below this one entitled Oreo ota has all the details and it needs to be side loaded through adb. Not Odin. But you will need to Odin the 950u base to get off u1
Click to expand...
Click to collapse
Ok thanks. I need to flash anyways because I'm having terrible battery issues and just debating whether to go to a newer version of 950u or back to U1 and losing WiFi calling. In your opinion is oreo beta worth it
So just to confirm, I have read everything, but I am just a bit confused. If I flashed the unlocked firmware via modified odin on a locked AT&T S8 it will remove a lot of the carrier bloat and give my my wifi hotspot back, but remove wifi calling. Similar to when I flashed the T-Mobile firmware on my AT&T S7 and got rid of a ton of the AT&T bloatware but was able to activate my wifi hotspot but lost wifi calling. I stay locked to AT&T which is fine that is not my purpose for flashing
---------- Post added at 07:03 AM ---------- Previous post was at 07:01 AM ----------
and can you re-upload the link is dead now
The links don't work. Any chance you've still got the firmware? I've been overseas since october. I have an unlocked AT&T phone that I intend to keep using when I get back, so I want to keep it AT&T FW.
Hi.
I have a G955U Galaxy S8+ AT&T Factory Unlocked on Android 7.0
Baseband Version: G955USQU1AQD9
Android Security Patch Level - April 1, 2017
I no longer live in the US, and currently in the Philippines. Phone works great and the signal is too and all, but I cannot get OTA updates.
Can I just download the firmware file in this thread and flash straight through ODIN, or do I need to follow another guide?
Folks,
Happy 2018,
Quick one:
I bought a locked ATT SM-G955U & reflashed it to a SM-G955U1 (currently on the latest December Security update) but the issue here is that despite doing this and eliminating ATT bloatware my phone continues to show Service Provider SW Ver. 9889544437594c3958 XAA//ATT
My buddy have an unlocked SM-G955U1 out of the box & there is no Service Provider information on his phone settings. He also gets all updates via OTA without issues, whereas I need to flash using ODIN manually which is not an issue for me but will be easier to get the OTA updates.
My phone is almost perfect but is there any possibility of flashing the specific CSC file for the SM-G955U1 on my SM-G955U transformed to a SM-G955U1?
I guess this was explained clearly.
Thanks for your support. XDA is the best.
SW, if listed as xaa/xaa/att...is what you wanted. The last three are always hardwired. I bought a T-Mobile U1 and switched it to Verizon. So mine now says vzw/vzw/tmo. If I read correctly in previous postings, you may still be forced to update manually, if on ATT. I believe...
If you flashed the files correctly in ODIN, then you wont see the provider version at all. It doesn't appear in the unlocked firmware. And you'll also get OTAs just fine. I know, because I bought a VZW 955U and flashed it with the unlocked 955U1 software.
Yup I can confirm too. I flashed the unlocked firmware to my spring g955u.
I can get OTA updates same with unlocked phone
Precisely .. I need to flash the correct one...
Where do I get the unlocked firmware ?
rich168 said:
Yup I can confirm too. I flashed the unlocked firmware to my spring g955u.
I can get OTA updates same with unlocked phone
Click to expand...
Click to collapse
Did you use regular ODIN or the modded Odin?
Where do you get the unlocked firmware from?
I got it from sammobile & the SW version persists
henrickrw said:
Did you use regular ODIN or the modded Odin?
Where do you get the unlocked firmware from?
I got it from sammobile & the SW version persists
Click to expand...
Click to collapse
Nodded odin
Check snap+ thread
I have a G955U1, is this ANY different than the G955U? Besides the name, I mean. Can I flash G955U firmware on my G955U1? Thanks.
G955U is USA carrier locked and G955U1 USA Unlocked
thunderroid said:
G955U is USA carrier locked and G955U1 USA Unlocked
Click to expand...
Click to collapse
Sorry for the noob question does this mean I can install G955U1 USA Unlocked firmware on my G955U carrier locked without any issues
turboedm said:
I have a G955U1, is this ANY different than the G955U? Besides the name, I mean. Can I flash G955U firmware on my G955U1? Thanks.
Click to expand...
Click to collapse
Simply put. There is no bloat. You'll get all the features samsung intended on their phones. You won't get features from carrier phones.
but in G955U1 the bootloader is locked
thunderroid said:
G955U is USA carrier locked and G955U1 USA Unlocked
Click to expand...
Click to collapse
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
tailgunner9 said:
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
Click to expand...
Click to collapse
I have been asking a lot about this myself. i am on tmobile. not sure if i want to make the leap to unlocked. want to keep visual voicemail, wifi calling, rcs support and what not. but i want to get in on the beta for pie. running drl7 now but the video bug with netflix and what not is annoying.
The u1 is bootloader locked. The u firmware is bootloader locked
If you own a u device and it is not sim unlocked the only advantage u1 firmware give is carrier bloat.
The u1 firmware can be flashed on a u device. But other than listed above no other perks come from this.
TheMadScientist said:
The u1 is bootloader locked. The u firmware is bootloader locked
If you own a u device and it is not sim unlocked the only advantage u1 firmware give is carrier bloat.
The u1 firmware can be flashed on a u device. But other than listed above no other perks come from this.
Click to expand...
Click to collapse
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
RangerVegas said:
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
Click to expand...
Click to collapse
Your not god
RangerVegas said:
I can semi-confirm this. From the recovery menu I can select bootloader and it boots to SOMETHING.....but it looks like it's booting to their downloader version and not what people would traditionally see from a normal bootloader screen. I do know this screen does NOT work for having the phone detected by Platform Tools so no way to use that at all as far as I can see. UGH. I swear I should have just bought a Pixel 2 when I had the chance. GODS Samsung is annoying. :crying:
Click to expand...
Click to collapse
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
TheMadScientist said:
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
Click to expand...
Click to collapse
Yea hopefully someone will respond to my main question in the noobie thread. Or maybe you would know. So I know Odin is the program Samsung uses to load new ROM on a phone. And I thought I read somewhere that there was a modified version of Odin that someone made that could install new/different ROM's. But I also saw in another message that either the current version of Odin, or the current version of the modified Odin could still load other ROM's and that someone had tested this. So that was my original primary question.
Is there a way I can use one or the other to load a Stock Android Pie ROM like what might come with a Pixel so I can avoid all the garbageware from Samsung? Or is there a chance doing that, that I would have some of my hardware features disabled since that seems to be an issue loading a ROM from another phone? And if so. Has anyone made a ROM for Samsung phones with all the garbage programs removed? Or is it still too early in the release of Pie for Samsung for that to be a reality right now?
Thank You for the info.
RangerVegas said:
Yea hopefully someone will respond to my main question in the noobie thread. Or maybe you would know. So I know Odin is the program Samsung uses to load new ROM on a phone. And I thought I read somewhere that there was a modified version of Odin that someone made that could install new/different ROM's. But I also saw in another message that either the current version of Odin, or the current version of the modified Odin could still load other ROM's and that someone had tested this. So that was my original primary question.
Is there a way I can use one or the other to load a Stock Android Pie ROM like what might come with a Pixel so I can avoid all the garbageware from Samsung? Or is there a chance doing that, that I would have some of my hardware features disabled since that seems to be an issue loading a ROM from another phone? And if so. Has anyone made a ROM for Samsung phones with all the garbage programs removed? Or is it still too early in the release of Pie for Samsung for that to be a reality right now?
Thank You for the info.
Click to expand...
Click to collapse
There is a pie beta I don't know if it is official yet. If you flash the unlocked firmware I've read you lose features like WiFi calling and volte. But I have not tried pie or unlocked firm ware on mine. There is a thread on installing safestrap then doing a rooted system images then from there depending on the flashed image if you do debloat. Again I haven't tried the new root method. I'm still on a really old revision from end of 2017
TheMadScientist said:
There is a pie beta I don't know if it is official yet. If you flash the unlocked firmware I've read you lose features like WiFi calling and volte. But I have not tried pie or unlocked firm ware on mine. There is a thread on installing safestrap then doing a rooted system images then from there depending on the flashed image if you do debloat. Again I haven't tried the new root method. I'm still on a really old revision from end of 2017
Click to expand...
Click to collapse
Ok thanks for the info. So apparently right now it's just a bit too early to be trying to find a Pie ROM that would work with my phone and not loose some hardware features. Which I guess makes sense since Samsung is only just now releasing it for S9's I believe in european countries I guess primarily to make sure how they borked it with their own software and tweaking didn't totally screw up their phones. Heh.
Oddly enough I got all excited when I saw it said there was an update today, but all it was for was a security update to bring it up to "Feb 1st, 2019" Android security level.
Thanks for the info about things. :good:
tailgunner9 said:
If I flash the U1 firmware on my phone with 955U, will I be able to return back to 955U if I do not like it?? What is the advantage of U1 on my ATT 955U phone??
Click to expand...
Click to collapse
YES you can Flash back to ATT U. I have done it.
What about "Smart View" (cellphone reflection in tv) in G955U1 with last Pie beta version (CRL2 -> ZSAB -> ZSBB -> ZSC2)... any issue
T0nyCr said:
What about "Smart View" (cellphone reflection in tv) in G955U1 with last Pie beta version (CRL2 -> ZSAB -> ZSBB -> ZSC2)... any issue
Click to expand...
Click to collapse
Nope... none problem... everything ok:good:
TheMadScientist said:
When you click reboot to bootloader it takes you to what as known as download mode which is how we flash stock firmware. And maybe a couple other things but yea mainly for stock firms. Its used by a program called odin and the latest is 3.13 i believe.
Click to expand...
Click to collapse
please I wnt clarification ...I bought g955u as used phone ..I hv oreo on it is stock from HK hongkong. and I know g955u is US variants can I flash US g955u1 firmware unlocked on it or g955u unlocked? am in Africa.
thanks
folusmile said:
please I wnt clarification ...I bought g955u as used phone ..I hv oreo on it is stock from HK hongkong. and I know g955u is US variants can I flash US g955u1 firmware unlocked on it or g955u unlocked? am in Africa.
thanks
Click to expand...
Click to collapse
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
TheMadScientist said:
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
Click to expand...
Click to collapse
Thanks
---------- Post added at 08:51 AM ---------- Previous post was at 08:50 AM ----------
TheMadScientist said:
Yes you can flash the u1 firm Ware as long as its the same revision bootloader 5th digit from the last.
I think you have to flash the equal combination file first
Click to expand...
Click to collapse
I want to flash pie can I process?
Hey Guys, I am in desperate need of help.
So I bought the note 20 ultra (model N986-U) from a seller in Texas (I live in Canada). The phones original csc code was ATT/ATT/ATT. I have a rogers sim card (csc code RWC). I noticed the phone is still stuck on One UI 2.5 because I am not connected to the ATT network.
So I tried changing the CSC using SamKey. I bought some credits, followed the steps and now for some reason my CSS is XAA/XAA/ATT.
I understand now that my phones model does not have a RWC firmware. Frija can't find the software for the SM-N986U running RWC but has no problem finding the software for the SM-N988W running RWC.
Is there any way for me to update my phone without bricking it? In an ideal world I would get OTA updates. Can I download the CSC_HOME file from the SM-N986W and flash it on my SM-N986U?
I'm really sorry for the noobish questions, I read so many threads and watched so many videos but I don't have the balls to experiment with such an expensive phone.
I know you can flash U1 firmware on a U device without any issues.
That's what I did to mine.
As for flashing W software on a U/U1 device, it's technically possible considering they are identical hardware, but I cannot say for sure what impacts it might have to the phone's performance.
You can always manually flash current U firmware.
rjohnstone said:
I know you can flash U1 firmware on a U device without any issues.
That's what I did to mine.
As for flashing W software on a U/U1 device, it's technically possible considering they are identical hardware, but I cannot say for sure what impacts it might have to the phone's performance.
You can always manually flash current U firmware.
Click to expand...
Click to collapse
Hey thanks for the answer,
I ended up flashing the W firmware on the phone and it worked flawlessly! Now the phone shows that it's a model N986W. OTA updates still don't work tho, even though the csc shows RWC
tripleaaa123 said:
Hey thanks for the answer,
I ended up flashing the W firmware on the phone and it worked flawlessly! Now the phone shows that it's a model N986W. OTA updates still don't work tho, even though the csc shows RWC
Click to expand...
Click to collapse
Glad it worked. Grab the latest firmware for RWC and then wait for the next update. (N986WVLU1DUB5)