Database Info

"Unbrick" your phone, easy.(Wiped OS with TWRP) Stuck on Huawei Logo help

Hello Guys,
since i saw a a bunch of posts with: "Help stucked on bootlogo" , "wiped OS", etc. ,
and i've done it by my selfe ^^ ,
I found the answer, so you need a working TWRP, and a SD-Card with a good /dload folder.
Go to the TWRP with power on key and at the same time vol + (up).
Now go to Reboot and Bootloader
now you flash the standard recovery.
Like you flashed the TWRP just with the restoration Recovery.img .
All you need is inside of this link provided by Hirs_E_Fruit from his Root Guide.
If you have finaly done flashing the stock recovery you can shutdown your phone and start it with power key + vol+ and vol-
all three at the same time for a solid amout of time idk about 8 sek or so i normaly release the power key after 5 seconds +-.
yea then you should see a blue circle a usb plug in middel of it and some chinese writing.
Hope this will help someone
Have Fun and Good Luck
Gadlion

not worked for me..
I can see blue circle... It will go till 90% but pausing...
in fastboot white screen It
still softbricked...
---------- Post added at 10:02 AM ---------- Previous post was at 09:50 AM ----------
How can I find and install TWRP while my phone is softbricked? Please provide some article

help????????

Gamexland said:
help????????
Click to expand...
Click to collapse
My phone logo is not only turned on DAV-701L

iRuLu Expro X1

I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.

Is that file you posted a newer updated rom?(4.4.2 or better ?) And what exactly does this flash "fix" ?
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
Click to expand...
Click to collapse

ssjgotengt said:
Is that file you posted a newer updated rom?(4.4.2 or better ?) And what exactly does this flash "fix" ?
Click to expand...
Click to collapse
sorry for the late responce, but the fix was for a virus, a very toublesome one by-the-way, that seemed to stay on the device even from a system reset, or from the recovery even after a wipe of cache/data/dalvic and what not... had been looking for the rom and couldnt find anywhere, had contacted the irulu site and we had multiple back and forth thru email... it was only however thru trial and error i found the correct rom which i posted for benefit of anyone who needs it.
also the fix was for an in-law but i believe it it was 4.4.2...

expro x1
Can you tell me tge serial number of your device? I've been looking for the firmware but none are working

expro x1
xL2e said:
sorry for the late responce, but the fix was for a virus, a very toublesome one by-the-way, that seemed to stay on the device even from a system reset, or from the recovery even after a wipe of cache/data/dalvic and what not... had been looking for the rom and couldnt find anywhere, had contacted the irulu site and we had multiple back and forth thru email... it was only however thru trial and error i found the correct rom which i posted for benefit of anyone who needs it.
also the fix was for an in-law but i believe it it was 4.4.2...
Click to expand...
Click to collapse
can you update the link?

kahrloz said:
Can you tell me tge serial number of your device? I've been looking for the firmware but none are working
Click to expand...
Click to collapse
Please don't ask for serial numbers here. :good:

My Irulu tablet does not have volume buttons.
Only power & esc buttons.
How do I get it into recovery mode then?

Hi all, I downloaded the firmware from Irulu for the 8-inch Expand x1s version, but I can not install it in Sideload ADB mode can you help me?

***fixed for irulu Inc through Android reset method
While it is on hold the power button and hit power off and when prompted to have it boot in quick mode hit yes. Turn on and it power button. And when asked to power off or reboot hold the power off link and agree to have safe mode activated. (Even if it was already activated the process of the irulu is quite similar to down syndrome so must repeat for the second time). Once off hold power and volume up till it brings recovery mode into display.

Tinman_Haus said:
While it is on hold the power button and hit power off and when prompted to have it boot in quick mode hit yes. Turn on and it power button. And when asked to power off or reboot hold the power off link and agree to have safe mode activated. (Even if it was already activated the process of the irulu is quite similar to down syndrome so must repeat for the second time). Once off hold power and volume up till it brings recovery mode into display.
Click to expand...
Click to collapse
Good morning, is the advice for my problem? because with the translation I can not understand. Thanks anyway
---------- Post added at 05:57 AM ---------- Previous post was at 05:44 AM ----------
xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Click to expand...
Click to collapse
Hello, my irulu is locked in a recovery mode for a year and can not install the original firmware. Can you help me with any rom so I can reactivate my tablet? . Thank you.

Jascha2016 said:
Good morning, is the advice for my problem? because with the translation I can not understand. Thanks anyway
---------- Post added at 05:57 AM ---------- Previous post was at 05:44 AM ----------
Hello, my irulu is locked in a recovery mode for a year and can not install the original firmware. Can you help me with any rom so I can reactivate my tablet? . Thank you.
Click to expand...
Click to collapse
Hey I couldn't find this firmware after you asked but I have since found it in an old hard drive so I am sharing it with you, hope it helps with restoring your tablet...
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk

kahrloz said:
can you update the link?
Click to expand...
Click to collapse
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk

xL2e said:
I had been looking for this in order to fix an irulu expro x1 tablet with much difficulty
after weeks of searching and trial and error i figured it out with some help from the net piecing info together
so now with my success i share with you:
1. shutdown tablet
2. power + vol ^ (hold till green android man)
3. power + vol ^ (might need to tap both multiple times, but be patient) enter recovery mode
4. scroll thru recovery menu, factory rest, clear cache, restart
5. now on pc extract zip file open sp flash tools folder, run application as administrator
6. load scatter file of X1048 x1049 xxxxx...
7. select all including preloader, instead of download only choose format all and download
8. hit download, make sure you power off tablet, then connect usb to pc
should show the red progress line, and after a few seconds begin flashing the tablet, allow it to do its thing till
green ok dialog button appears, power on and voila!!!
mod edit: pay per click link removed.
Click to expand...
Click to collapse
https://drive.google.com/file/d/17mpGEyaKRODxHkoBDen5YxxktFhvD5Mp/view?usp=drivesdk
Sent from my SM-G935F using Tapatalk

irulu tablet expro x1 x9 pro firmware
am looking the irulu tablet expro x1 x9 pro firmware

Bricked my Mate 8 when trying to go from NXT-L29C636B180 to NXT-L29C636B211

Hello everybody,
I managed to brick my mate 8 as per the title, honestly thinking why did i even bother, that whole saying "If it ain't broke, don't fix it." applies here 100%.
So i have been in the NXT-L29C636B180 which i put with the dload method (original was C636B103) and since then everything was good, all except the video camera that is.
So i wanted to try to get to the nougat update (561?) but i read that you need the 211 first. As i couldn't find it i used the android app: firmware finder, and using the proxy method i told basically the system that a new update is up and download it - so this is the update option in the settings..
So after it downloaded NXT-L29C636B211 then it restarted, starting unpacking, and the installation stopped at around 5% when it restarted by it self. And that was it...
I am in a screen where i cannot use the touch, but only the buttons on the side and have the options
"Reboot system now"
"Wipe data/ factory reset"
"Wipe cache partition"
Tried the cache and rebooting, didn't do anything.
Tried wiping, and reboot, then i go in another page
"Huawei eRecovery" where it asks to connect to the wifi and download but then throws an error message "Getting package info failed"
That is pretty much it, i tried putting the update.app in the dload folder in the sd card and tried to use that method but it wouldnt boot that (used the volume + and - and power buttons) but it took me back to one of the above.
Am i out of hope? Is there anything i can do to restore it?
I really appreciate the help.

same problem!

kaelthuzad said:
Hello everybody,
I managed to brick my mate 8 as per the title, honestly thinking why did i even bother, that whole saying "If it ain't broke, don't fix it." applies here 100%.
So i have been in the NXT-L29C636B180 which i put with the dload method (original was C636B103) and since then everything was good, all except the video camera that is.
So i wanted to try to get to the nougat update (561?) but i read that you need the 211 first. As i couldn't find it i used the android app: firmware finder, and using the proxy method i told basically the system that a new update is up and download it - so this is the update option in the settings..
So after it downloaded NXT-L29C636B211 then it restarted, starting unpacking, and the installation stopped at around 5% when it restarted by it self. And that was it...
I am in a screen where i cannot use the touch, but only the buttons on the side and have the options
"Reboot system now"
"Wipe data/ factory reset"
"Wipe cache partition"
Tried the cache and rebooting, didn't do anything.
Tried wiping, and reboot, then i go in another page
"Huawei eRecovery" where it asks to connect to the wifi and download but then throws an error message "Getting package info failed"
That is pretty much it, i tried putting the update.app in the dload folder in the sd card and tried to use that method but it wouldnt boot that (used the volume + and - and power buttons) but it took me back to one of the above.
Am i out of hope? Is there anything i can do to restore it?
I really appreciate the help.
Click to expand...
Click to collapse
That happened to me too. you will still be able to enter fastboot. plug your phone to your pc and and press and hold the power and volume down. that should take you to the fastboot screen.
find the appropriate twrp recovery for your phone and use the command
fastboot flash recovery "recovery name".img. wait till its done.
press and hold the power and volume down button till the phone reboots. that will takeyou to twrp recovery. there you could either flash b210 or the beta b521 -- which i am on.

crazynitro said:
That happened to me too. you will still be able to enter fastboot. plug your phone to your pc and and press and hold the power and volume down. that should take you to the fastboot screen.
find the appropriate twrp recovery for your phone and use the command
fastboot flash recovery "recovery name".img. wait till its done.
press and hold the power and volume down button till the phone reboots. that will takeyou to twrp recovery. there you could either flash b210 or the beta b521 -- which i am on.
Click to expand...
Click to collapse
Thank you for the response. I will give it a try today after work i am a complete noob so its the first time for me to see what fastboot is, never heard of TWRP, i was always stock so never needed to mess with my phones.
If i recall doing power and volume down while plugged it was taking me to the page i mentioned to wipe the data, reboot or wipe the cache.
I managed to go to the fastboot page on the phone by pressing volume - and then plugging the phone to the pc. Now in the white page on the phone it shows, Phone unlocked in red. Does this mean just it is carrier unlocked?
So do i need to have the bootloader unlocked to do anything here? How do i do that? I cannot buy the code i suppose now since my phone is bricked i will have to go the Huawei way? And how do i do that, i saw a site to create a HUawei ID but in the registration page it didn't mention UK anywhere (where i live), mentioned Hong Kong and other Asian territories. I bought the phone from Wonda mobile, and being the 636 i would think its the asian model anyway.
Regarding TWRP, i didnt install it from before the phone was bricked will i still be able to do what you mentioned? And for the image i need to use, do i need to go to the firmware i was in before (636B180) or the one i tried to go to (636B211)? I can't seem to find the 180 anymore anywhere.
Sorry for the mass amount of questions, trying to sort it i have the phone for less than a year and i am gutted for messing it up like that.

kaelthuzad said:
Thank you for the response. I will give it a try today after work i am a complete noob so its the first time for me to see what fastboot is, never heard of TWRP, i was always stock so never needed to mess with my phones.
If i recall doing power and volume down while plugged it was taking me to the page i mentioned to wipe the data, reboot or wipe the cache.
I managed to go to the fastboot page on the phone by pressing volume - and then plugging the phone to the pc. Now in the white page on the phone it shows, Phone unlocked in red. Does this mean just it is carrier unlocked?
So do i need to have the bootloader unlocked to do anything here? How do i do that? I cannot buy the code i suppose now since my phone is bricked i will have to go the Huawei way? And how do i do that, i saw a site to create a HUawei ID but in the registration page it didn't mention UK anywhere (where i live), mentioned Hong Kong and other Asian territories. I bought the phone from Wonda mobile, and being the 636 i would think its the asian model anyway.
Regarding TWRP, i didnt install it from before the phone was bricked will i still be able to do what you mentioned? And for the image i need to use, do i need to go to the firmware i was in before (636B180) or the one i tried to go to (636B211)? I can't seem to find the 180 anymore anywhere.
Sorry for the mass amount of questions, trying to sort it i have the phone for less than a year and i am gutted for messing it up like that.
Click to expand...
Click to collapse
did u solve it plz i have same problem

first download NXT-L29C636B170 here: https://goo.gl/dHk8r8 , download Huawei extractor here: https://forum.xda-developers.com/showthread.php?t=2433454 ,unzip update.zip from B170 firmware downloaded, go to huawei extractor and choose UPDATE.APP (from B170 firmware extracted), and extract only recovery.img, download ADB Command here: https://goo.gl/05Rx06 unrar and copy recovery.img into ADB Command folder, put your phone in fastboot mode, turn off your device, then hold volume - and fast plug your phone into PC, now you are in fastboot mode,go to ADB Command folder and hold shift, holding shift key do click right with the mouse,and click on: open command window, now write: fastboot devices, enter, and you can see your device are connect, now write: fastboot flash recovery recovery.img, enter, when it finished write: fastboot reboot, and enter, then the system reboot, turn off your phone, now put UPDATE.APP (from B170 firmware) into dload folder in sdcard, with your phone off hold volume +, volume -, and power at the same time, then you can update by dload method,wait it finish and the phone reboot, now you're running NXT-L29C636B170, and if you want update to NXT-L29C636B211 you can find here: https://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727/amp/ unzip the update.zip and put UPDATE.APP (from B211) into dload folder in sdcard (obviously you need delete the UPDATE.APP from B170), now go to dialler and press *#*#2846579#*#* and project menu open, choose Software upgrade>SDCard Upgrate and yes, the system reboot , wait it finish and reboot, and you're now running NXT-L29C636B211. if you have any problem just tell me.
sorry for my bad english.

How to revert Back to Oreo From Early Android Pie on Nokia 6 2017

Note if you had TA-1021 Device & you updated to Early Pie manually by using Code *#*#874#*#* & you have changed your model to TA-1000 by updating that firmware, Now you want your old Model TA-1021 back with Official Stock Oreo Rom & with Monthly Security Patch Updates, then this method is for you !
Warning Do it in your On Risk, you will be stuck into bootloop, also you need to install OST LA into your PC
But you will also get your warranty back
for those with TA-1021 who have installed this firmware, via OTA Forced method, also no unlocked bootloader,
you have to put this file inside of your internal memory (neither in folder nor in Card SD)
you also need also to rename it to D1C-9999-0-00CN-B09-update.zip before copying to your internal phone memory.
https://android.googleapis.com/pack.../adeecdc3fe3dc4b7518565d22a7d490d367b02c7.zip
Download Oreo 8.0 Firmware with February Security from the link. (it is Amazon version firmware but do not worry after getting 8.1 update from settings you'll get your old firmware back)
After placing into your internal Memory without any folder
Dial *#*#874#*#* to update.
If you ran in rebooting loop, you have to install OST, just to be able to put phone in Download Mode, after that
connect your phone to the charger, and hold power key + volume up until your phone will reboot three times,
then reconnect it to PC with OST opened, then just redo again power + volume up to exist Download Mode and
reboot (don't disconnect the phone from USB port), after vibration, hold up volume up and installation
of Oreo will continue till it finished, after that, you need to enter in recovery, wipe data/cache before you
proceed with the setup wizard.

Special Thanks to @Marius.Petran

Without PC how go back pie to Oreo

What do you mean by phone memory

nomanali786 said:
Without PC how go back pie to Oreo
Click to expand...
Click to collapse
i don't think if it is possible without pc because you will stuck into bootloap, you just need to plug in your data Cable with OST LA installed into your pc, it will automatically enter into download Mode.

tusharvarshney said:
What do you mean by phone memory
Click to expand...
Click to collapse
Internal Memory = Phone Memory

Nouman112 said:
i don't think if it is possible without pc because you will stuck into bootloap, you just need to plug in your data Cable with OST LA installed into your pc, it will automatically enter into Recovery Mode.
No problem
Click to expand...
Click to collapse

nomanali786 said:
Okay, how to root this. Without PC, I do not have a computer
Click to expand...
Click to collapse
i wasn't talking about root here, please read the title first or check other methods provided by other members !

Nouman112 said:
Special Thanks to @Marius.Petran
Click to expand...
Click to collapse
Bhai tumne kese Kiya please mujhe batao

anybody facing unresponsive touch issues in ta -1021 ?

please show us a video tutorial about the method of reverting ta-1021????
---------- Post added at 01:15 AM ---------- Previous post was at 12:57 AM ----------
What we have to do with ost on pc???

thehumanx said:
anybody facing unresponsive touch issues in ta -1021 ?
Click to expand...
Click to collapse
for me it happens when using device while charging also my device is lagging too much after pie update while typing in social Apps e.g whatsApp etc

ranok509 said:
please show us a video tutorial about the method of reverting ta-1021????
---------- Post added at 01:15 AM ---------- Previous post was at 12:57 AM ----------
What we have to do with ost on pc???
Click to expand...
Click to collapse
We need OST LA just to enter into Download mode because at that moment we are stuck into bootloop.
after going into Download mode, connect your phone to the charger and hold power key + volume up until your phone will reboot three times.
then reconnect (Unplug - Replug) it to PC with OST opened, then just redo again: press power + volume up in Download Mode and it will reboot (don't disconnect the phone from USB port) after vibration, hold volume up and installation of Oreo will continue till it finished, after that you need to enter in recovery, wipe data/cache.
then just reboot the device everything will be fine now.

So bro we Don't need to do anything on ost la.
Just Plug in data cable and then the download mode will automatically start..Isn't it???

hey the installation of oreo doesn't starts????why??

ranok509 said:
So bro we Don't need to do anything on ost la.
Just Plug in data cable and then the download mode will automatically start..Isn't it???
Click to expand...
Click to collapse
Yep

robin221 said:
hey the installation of oreo doesn't starts????why??
Click to expand...
Click to collapse
Try again & again and wait installation will start automatically

I'm not also facing the method of installation..
I have done it step by step but no reactio...
Please tell me???
Or else I'll be ruined?????

OST LA software link please.

Nouman112 said:
We need OST LA just to enter into Download mode because at that moment we are stuck into bootloop.
after going into Download mode, connect your phone to the charger and hold power key + volume up until your phone will reboot three times.
then reconnect (Unplug - Replug) it to PC with OST opened, then just redo again: press power + volume up in Download Mode and it will reboot (don't disconnect the phone from USB port) after vibration, hold volume up and installation of Oreo will continue till it finished, after that you need to enter in recovery, wipe data/cache.
then just reboot the device everything will be fine now.
Click to expand...
Click to collapse
Hi i need some help.
I tried these steps but ost la is stuck at reflash service bootloader

Antutu benchmark brick my phone :/

I run Antutu benchmark, everything goes ok, till at one moment phone reboot, and goes to infinite boot loop. By pressing vol up + power i can go to boot menu, but recovery menu not load, just continue infinite rebooting. How this is even possible that Antutu brick my phone.. what to do . Everything was stock, i do not made any changes, phone was not root-ed. Do you thing it will be accepted on warranty ?
Maybe i can do something by myself ?

Unbrick
---------- Post added at 12:15 PM ---------- Previous post was at 12:13 PM ----------
Unbricking Guide
Step-1 You have to enter the device into 9008 Mode.
Step-2 Connect the PC with the device
Step-3 Go to Control Panel > Device Manager > Scroll for your connected device > Right Click on device > Update Driver
Step-4 Now browse for the CAB file and select it to install the driver.
Step-5 Download the firmware and extract its content to a folder on your PC.
Step-6 Then look for a file called update_image_EDL.bat script. Execute it. This step will recreate the partitions on your device.
Step-7 Now to be able to flash the firmware on created partition exceute the file flashall_AFT.cmd.
Step-8 Now you can download the latest stock firmware for your ASUS Zenfone 6.
Step-9 Transfer that firmware zip to the external storage on your device.
Step-10 Enter the bootloader mode by holding the Volume + Power button
Step-11 Select the option Recovery Mode by
http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab
https://androidfilehost.com/?fid=1395089523397969054
https://www.getdroidtips.com/asus-zenfone-6-stock-firmware-collections-back-to-stock-rom-restore/

porlock said:
I run Antutu benchmark, everything goes ok, till at one moment phone reboot, and goes to infinite boot loop. By pressing vol up + power i can go to boot menu, but recovery menu not load, just continue infinite rebooting. How this is even possible that Antutu brick my phone.. what to do . Everything was stock, i do not made any changes, phone was not root-ed. Do you thing it will be accepted on warranty ?
Maybe i can do something by myself ?
Click to expand...
Click to collapse
With Antutu Bench you can stress your phone enough to invoke death loop if you have faulty motherboard. Because it's a known ZF6 problem it will be serviced on warranty for sure.

_jis_ said:
With Antutu Bench you can stress your phone enough to invoke faulty motherboard if you have one. Because it is known problem with some batch of ZF6 it will be serviced on warranty for sure.
Click to expand...
Click to collapse
Already in service center, i send him on Monday.